Number of licenses Name User Plus for 4 servers
Dear All,
I can not find information of the licensing rules for my company. Count the number of licenses NUP please.
In our company 100 employees and 4 different servers with Oracle database Standart Edition.
Аt the same time one employee (human) can connect to any database.
We will use only NUP not processor licenses.
How many lisenses NUP we need buy?
100?
Thank you.
Sorry, if question for another forum.
http://www.oracle.com/us/corporate/pricing/olsadef-uae-v101003-070613.pdf
You are responsible for ensuring that the following restrictions are not violated:· Oracle Database Standard Edition may only be used on machines which have the ability to run a maximum of four
processors.>
Named User Plus: is defined as an individual authorized by you to use the programs which are installed on a single serveror multiple servers, regardless of whether the individual is actively using the programs at any given time. A non human
operated device will be counted as a named user plus in addition to all individuals authorized to use the programs, if such
devices can access the programs. If multiplexing hardware or software (e.g., a TP monitor or a web server product) is used,
this number must be measured at the multiplexing front end. Automated batching of data from computer to computer is
permitted. You are responsible for ensuring that the named user plus per processor minimums are maintained for the
programs contained in the user minimum table in the licensing rules section; the minimums table provides for the minimum
number of named users plus required and all actual users must be licensed.
Similar Messages
-
Licensing and user rights for speech features in Mac OS 9.
Are they to be used only for non-commercial personal uses?
Are they free to use for anything as long as you give Apple attribution?
For example, if they were to be used as voices in an iOS game, would it need to be free, be fine commercially, need to pay a license fee or simply be disallowed at all?
Thanks very much.Is it in any way like vocaloid or UTAU, which lets you use it for any purpose, even commercially as long as it follows the law (and is not used to defame people)?
http://en.wikipedia.org/wiki/Vocaloid
http://utau.wikia.com/wiki/UTAU_wiki -
What model number is the Iphone6 plus for T-mobile contract free?
What model number is the Iphone6 plus for T-mobile contract free?
Hey Winnerzy,
Thanks for the question. You can use the following chart to determine the model number of an iPhone 6 Plus for a specific carrier:
Apple - iPhone 6 - View countries with supported LTE networks.
http://www.apple.com/iphone/LTE/
Thanks,
Matt M. -
Hello expert,
I am working on case where i need to calculate insurance coverage amount for IT168.I am using user exit PBEN0011 for that..but for doing some validation i need begin date to read IT0008..So my question that since BEGDA is not available in above user exit .i want to put the begda in memory in some user exit which is being called on display option of records..
if anybody knows it please help me..
user exit called on display option of pa20 or pa30.
Thanks in advance.
ShwetaHi,
Transaction Code - PA30 Maintain HR Master Data
Enhancement/ Business Add-in Description
Enhancement
PBASRP01 PA: User exit distributed reporting
PBAS0002 PA: Enhancements for Personnel Administration - Menu
PBAS0001 PA: Pers.Admin./Recruitment: Default values and checks
PARA0002 Enhancement for Calculating Annual Salary; IT0008,14,15
PARA0001 Enhancement for Determining the Number of Periods
HRRPAI01 User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
HRPC0001 HR: PC download authorization
HRPBAS01 User Exit for HR Master Data -
Lightroom 5 number of licenses
I have just purchased a copy of LR5 which came as part of a camera lense purchase. The card inside shows one serial number. It says it is valid for one license. Can this version be installed on 2 PCs using this number or do I have to get another serial number for PC #2? I guess I am basically confused over serial numbers versus number of licenses.
waynee63268028 wrote:
Thanks for the quick response...is a license and a serial number the same?
Yes. -
HI GROUP
FIRST OF ALL THANKS TO U ALL.
U GUYS ARE GREAT HELP.
THIS TIME I WANT TO KNOW THE USER-EXIT FOR 'VF11'.
I HAVE A CASE THAT WHEN I AM DOING VF11(i.e INVOICE CANCELLATION) THEN I WANT TO HAVE A CHECK THAT ON THE DOCUMENT OF WHICH I AM CANCELLING THE DOCUMENT.
MEANS THE DOCEMENT WHICH I WIL LGIVE IN THE VF11. SHOULD HAVE DATE OF THE SY-DATUM MONTH ONLY IF MY CURRENT MONTH IS 4.2006 AND MY (BILLING DOCUMENT DATE ON WHICH THAT DOCUNEBT IS CREATED WHICH I AM TAKING FOR CANCELLATION IS 3.2006 THEN IT SHOULD NOT ALLOW THE DOCEMNT TO BE SAVED)
FOR THIS I WANT TO IMPLEMENT A EXIT.
PLEASE HELP ME GUYS ITS VERY VERY URGENT.
I WILL DEFINATELY REVERT BACK WITH REWARD POINTS.
THANKS IN ADVANCEHI
GOOD
CHECK OUT WITH THESE USER EXITS
SDVFX007
SDVFX008
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010
SDVFX011
V05I0001-User exits for billing index
V05N0001
V60A0001 Customer functions in the billing document
V60P0001
V61A0001 Customer enhancement: Pricing
THANKS
MRUTYUN -
How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?
Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect. Consequently, I was and am constantly changing it. Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes.
Barring the above, how about a way to merge all of the Apple IDs and passwords into one. -
Namede user plus license for ADF
Can somebody clarify, please, what "named user plus" is when it comes to Weblogic Standard Edition?
We are developing Fusion application (ADF BC, ADF Faces stack) which is targeted for companies with no more than 10 employees who's gonna use that application.
What would be the best licensing path for that?
We are planning to suggest to our potential clients to purchase Weblogic Server SE named user plus license for 10 users. If we understand correctly that would be 10 * 200$ = 2,000$.
Can we purchase less than 10 user licenses if company has less than 10 employees?
Would that 2,000$ be the final price for license or there is something else that we also have to take into account?
Thanks,
NebojsaI think your understanding of the license is correct.
However, for a situation where you are an ISV developing a software package that uses Oracle technology, you can get a better license term if you just embed the Oracle solution into your product.
Check out this page:
http://www.oracle.com/partners/en/how-to-do-business/distribution-agreements/distribution-agreements-021169.html
specifically the details in the sections:
Application Specific Full Use Program Distribution Agreement (ASFU)
Embedded Software License Distribution Agreement (ESL) -
Named User Plus Licensing clarification
Hello,
I would like to know as Named User Plus Licensing defines any end-node that receives data from or creates data for that Oracle DB including human users. for example. if we've purchased 5 named user licenses and and those 5 users, if one user create 3 sessions to database, so 5 users create 15 sessions to database, than how many number of licensing need to purchase or to be counted?
Thanks,Please for License question it's prefer to contact Oracle local office / Sales Dept or account manager in your country , they will provide you with information you need
-
Vote for "We will NOT buy CC" with number of licenses.
I open this thread for simple purpose: please, provide your number of licenses currently in use by you or your conpany, which will NOT be upgraded to CC. Please, sign!
My company will NOT upgrade to CC
6 (six) licenses of CS6 Design Standart Suite.http://www.oracle.com/us/corporate/pricing/olsadef-uae-v101003-070613.pdf
You are responsible for ensuring that the following restrictions are not violated:· Oracle Database Standard Edition may only be used on machines which have the ability to run a maximum of four
processors.>
Named User Plus: is defined as an individual authorized by you to use the programs which are installed on a single serveror multiple servers, regardless of whether the individual is actively using the programs at any given time. A non human
operated device will be counted as a named user plus in addition to all individuals authorized to use the programs, if such
devices can access the programs. If multiplexing hardware or software (e.g., a TP monitor or a web server product) is used,
this number must be measured at the multiplexing front end. Automated batching of data from computer to computer is
permitted. You are responsible for ensuring that the named user plus per processor minimums are maintained for the
programs contained in the user minimum table in the licensing rules section; the minimums table provides for the minimum
number of named users plus required and all actual users must be licensed. -
After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page
After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help hereHello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen -
Aperture forgets it license and asks me for the serial number over and over again
Hi,
This is getting ridiculous to the point where I'm thinking of just ditching Aperture. It's continually forgetting is license and asking me for the serial number over and over again. I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not accepting either of them. What's going on and how do I fix it permanently?
Thanks,
RobRob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
http://support.apple.com/kb/DL1610
About Aperture 3.4.3
Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie -
How sharepoint understand when user requests for web applications by their DNS names
HI
I configured Alternate access mapping in my sharepoint farm for default ,intranet zones
and spt farm has two web front end servers and they load balancing by F5 device
in WFE servers there are different web applications are running on different ports
so here I want to know how load balancing works, load balancing configured in F5 device.
when users request a webapplication from browser (ex http://cms) where this request will go
1)when I ping cms and other web applicaations it returns me a loadbalancer server IP for all web applications;
ping cms : it returns 10.xxx.0.80 , same ip returns when I ping for other web app
but ex CMS web application run on the 10.xxx.1.26:81 port in sharepoint server
2) and these sharepoint web applications running on different ports in sharepoint web servers , so here how sharepoint understand when user requests for web applications by their DNS names
http://cms and http://products etc
adilI'm not sure if the F5 can add a port number (I'm not an expert on load balancers). But in general if you design the SharePoint site to run on port 81 then you need to have port 81 appended to the request or it won't work. http://cms in your
example would take you to http://cms:80 not http://cms:81. But in general DNS will resolve the address back to the F5 load balancer. The load balancer will look at the header of the HTTP request (which contains the original address you requested)
and forward the request to the appropriate web front end IP address. If your web front end is using one IP address for multiple sites then those sites need to be differntiated by using a custom port like 81 (which must be included in the original request)
or because a host header was bound to the web application when it was created. If they are running on different port numbers then the request must include the port number by the time it gets to the SharePoint server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
User-Exit for changing Sales Document Number - Urgent
Hi Experts ,
Please suggest me the <b>User Exit for changing Sales Document Number.</b>
thanks,
Jayesh<b></b>hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN -
I have iMessage service in my mac & it works perfectly.
I buy iPhone 5
When I sign in with my appleid to activate iMessage it says "iMessage Activation The user name or password for ... was incorrect Try again" but its all correct. what do i do?
my appleid is from saudi iTunes Store
I'm so disappointed1. Make sure software is up to date
2. Make sure Messages is enabled; Settings>Messages
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo
Maybe you are looking for
-
Dealing with the AggregateException thrown when calling task.Wait().
I am new to the Task facility and am curious on best practice here. I am dispatching tasks something like: Task task = Task.Run( () => try this.MyMethod(paramA, paramB); catch taskCancellationTokenSource.Cancel(); throw; finally semaphore.Release();
-
Linux Terminal Server Project package
I have packaged the binary scripts that the Linux Terminal Server Project puts out. I am starting to play around with the stuff... 8) Maybe I can work some documentation out of it, as well as a couple of packages maybe... Got a question though, since
-
I've got a dead pixel (white) in the middle of my Macbook-pro retina display.
I've got a dead pixel (white) in the middle of my Macbook-pro retina display, what to do? Just bought it a a month ago, and it's really anoying me! Harmen
-
Cs3 and snow leopard spaces problem
Hi, Panic over about cs3, because even though Adobe is not supporting it, it seems to work ok. Touch wood. Hopefully I won't come across any annoying problems which affect my workflow. I want to wait for cs5 to upgrade. A problem with spaces might be
-
Won't Install in Win XP "The system cannot open the device or file specifie
When installing Quichktime or iTunes, the installer displays ""The system cannot open the device or file specified." What should I do?