Number of lines in SAP B1 2007A

Hi all.
We have a client that use SAP B1 2007A on a SQL server 2005. The sometimes make very big sales quotations which exists of maybe 3000 rows. To my understanding, there is documentation saying there is no limitations on amount of rows it only affects performance. What would be the acceptable performance (measured in time) when adding line number 3001 on a sales quotation?
For our install, we wait maybe 20 seconds for adding the item and then we wait maybe 1 minute when updating the sales quotation. We are running on a machine with 4 processors and 4GB RAM.
Does anyone have some other experiences on this field?
Best regards, Runar Wigestrand.

Hi Runar,
A 3000 line quote is too much for B1 to handle. The scenario you mentioned if not the worst in that amount of data. Although it is no limitations on amount of rows, the performance is the LIMIT.
Even if your client upgrade their hardware to double the performance, it will still be painful.
Better if they can change their current business process. I think the number of line can be trimmed if they set up item correctly.
Thanks,
Gordon

Similar Messages

SAP-Script - Draw Table (Boxes) with variable number of lines

Hello,
I want to create a Table with Frames in a SAP-Script Form. First of all I don´t know the position of the table in the window main. It can be page 2 or 3 on top or in the middle. But i have to describe a position like
POSITION YORIGIN '12.95' CM. How can i position the table in a variable way?
And i don´t know the number of lines of the table. How can I manage to draw the correct numbers of boxes as numbers of lines exist?
Kind Regards
Carsten Fuchs

Hi carsten,
1. Drawing GRID (just like excel, matrix)
   is very cumbersome in sapscript layout.
(either dynamically, or hardcoded)
2. Moreover, the final look,
   may or maynot appear as requried,.
ie. exactly with proper alignment and grid lines.
3. If the font size is required to change,
then the dynamic position also changes.
4. If the grid is supposed to go to the next page,
again the calculation and logic becomes tougher.
5. To use grid, its better to use smartform,
   which provided FINE CONTROL of the grid
and its lines and width, height, style etc.
6. In sapsctip, at most we can use
   UNDERLINE (_) and PIPE (|)
regards,
amit m.

Restriction on number of line items in an automatically generated document

Hi all,
As per my info, an accounting document must have a minimum of 2 line items to complete the document. At the same time an accounting document can have a maximum of 999 line items.
My observation:-
When I am posting depreciation using t-code AFAB, system is posting depreciation document (document type AF). While checking, I found that the system has posted around 16 document for a period.
On further checking, I observed that the each document contains a max 100 line items.
I am using SAP 4.7
My Query:-
a> Is there any way / place wherein we can restrict the maximum number of line items possible for a given docuemnt type or for all document types in the client?
b> In case it is not possible to restrict the number of line items per document, what could be possible reason for the system behaviour wherein it is posting about 100 line items per document & thereafter starts a new document.
Thanking you in advance
Santosh K Agarwal

Hi,
I have been reading CIN. There I came across with a statement i.e. "There is restriction on no of line items to be in an Excise Invoice".
where you read this i dont know
but yes for outgoing excise invoice we can put limitation in sap cin
as per incoming excise invoice i think no limitation
in path SPRO-tax on goods movemnet-India-basic setting-maintain excise registration here you can maintain this
and yes this for india only for other country they may have different
Regards
Kailas ugale

Data missing while running a crystal report from SAP B1 2007A

Dear All,
I am facing an issue that is if i run a report from SAP B1 using Crystal reports AddOn, it misses out some data.
Few Initial pages and a last page appears in the report. But when i run the same report using Crystal reports Designer it shows the actual number of pages. I have tested the above discussed issue on the server & workstation machines.

Dear All,
I would like to explain the above posted problem in detail. I need your generous help, I am facing an issue that is for Crystal Reports which are based on 'Financial Templates' data is missing out. For Example, If i run the report using 'Crystal Reports Designer' it is showing the whole Financial Template based on 5 pages, but if I try to run it from 'SAP Business One'
using 'Crystal Reports AddOn' it is missing out the data e.g. it is showing Page 1 and then Page 4 & 5.
Page No. 2 & 3 is missed out. For your information it was running fine from the past two months now I am
facing issues in running it. Rest of the reports are running fine.
I have tried reinstalling the Crystal Reports Runtime and Crystal Reports AddOn for SAP B1 on
Client machines, but the problem is not resolved yet.
Server Machine Details
Version : SAP B1 2007A Server SP01 PL08
OS: Windows Server 2008 R2 (64-bit)
Crystal Reports AddOn for SAP B1 (64-bit)
Crystal Reports Runtime
Crystal Reports Runtime for Visual Studio
Client Machine Details
Workstation 1
Version : SAP B1 2007A Client SP01 PL08
OS: Windows Vista Enterprise (32-bit)
Crystal Reports AddOn for SAP B1 (64-bit)
Crystal Reports Runtime
Crystal Reports Runtime for Visual Studio
Workstation 2
Version : SAP B1 2007A Client SP01 PL08
OS: Windows XP
Crystal Reports AddOn for SAP B1 (64-bit)
Crystal Reports Runtime
Crystal Reports Runtime for Visual Studio

Issue with number of lines in Table control for an web transaction in ITS

Hi,
We have acustom web transaction ZC03 where we have used table controls. Recently a kernal patch has been installed and after that the number of lines appearing in table control has got changed. Earlier table control was coming with 5 lines and presently its coming with 3 lines. Can you please help me to fix the issue.
The code used in HTML template for table controi is given below:
`SAP_DynproLayerBegin(005,013,067,006)`
`SAP_TableControl("TC_TIME1")`
`SAP_DynproLayerEnd()`
I have tried other alternatives like `SAP_DynproTableControl("TC_TIME1")`, `D_TableControl("TC_TIME1') but did n't get any fruitful result also.
Thanks and Regards,
Ranadev

What where the precise Kernel updates? What where you on and what did you upgrade too?
Did you apply any BASIS Support Pack corrections during the Kernel upgrade?
If you applied a new BASIS support pack - check the following WIKI:
[How to check the publishing Date of an Internet Service|http://wiki.sdn.sap.com/wiki/x/OYG8BQ ]
if you need to republish - use the following WIKI:
[How to activate, publish and test ITS services in the integrated ITS?|http://wiki.sdn.sap.com/wiki/x/kmE ]
Regards,
Oisin

Reg: Maximize the Number of Line Items in Invoice Verification

Hi Gurus,
For a Client who is dealing in Retail business,there is a necessity to maintain a huge number of line items at Invoice Verification level.Standard SAP has some maxium line items for each document type.Where are the control for maximum line items and how to increase that?
Regards,
Sarosh

Hi,
At Billing-Country specific settings you will be able to maintain maximum 3 digit billing item no i.e 999.
Any other suggestion.
Regards,
Sarosh

Regarding Number of Line Items for Remittance Advice (REMADV)

Hi all,
We have an issue where the user tries to upload remittances line items. (More than 10,000 line items).
We had come across a statement as "Only 100 remittances are allowed per day in SAP and 1 remittance can have only 10,000 line items each".
However, we would like to confirm the same.
Please let us know if SAP permits maximum of 10,000 line items only. Also let us know if there is any standard SAP functionality/Function module that confirms the same.
Regards,
Lavanya

I did all settings as told by you But still i am getting the same error Please specify the number of line items for the challans
Is there any other setting needed before this or after this?
Regards,
Mehul

Increasing the number of line items in PO

hello fellow abapers,
i have a query. i dont know if its the headache of the function ppl or the technicial person - which happens to be me - but i have to get this solved at the earliest.
now ive made a PO for materials from the scratch and everythin is workin fine. except that out of the blue comes a PO with over 10000 line items. yes, thats right - 10,000 line items.
so obviously an error was thrown by SAP. unfortunately the end-user did not think it necessary to take a printout or record the error message.
anyways the error said something to the effect that it did not allow so many line items or somthing like that.
now can anybody pls help me out with this. firstly is dhere any restrictions on the number of line items, and secondly, if thats the case how do i find a work-around.
thanx a bunch
pk

Hi,
The basis sets the maximum number of pages that can be printed by the user in authorization object S_SPO_PAGE.
Please discuss with your basis guy.
Tyken

Maximum number of line items in PO/SA....

Hi,
1.
What is the limitation on maximum number of line items in a PO/schedulling agreement/Contract.
2.
Also what is the maximum permissible number of lines in a single accounting document possible.As far as I know there is a limitation of counter 999 meaning if an aaccounting document is generated after GR then it will only allow max 999 lines.
Is there any other way to avoid this.Because in my case I have for several line items in PO and several pricing conditions with separate GL account.Now when I do GR and if a PO has many line items with about 4 to 5 conditions then for each line item there would be minimum 6-7 entries.
How can this best be handled in SAP.
I was being adviced to split the GR but is there any better way or is there any option like summerised acounting document ?
Please suggest as this is most critical for me.
Thanks in advance
Regards,
manOO

Hi,
There is no limitation in PO. But if you want, you can use following user exit;
<b>EXIT_SAPMM06E_012</b>
With regard to Maximum Number of items: There is a limit of (999) line items which can be posted per FI document. This is because the line item number (BSEG-BUZEI) field length is defined as (3) numeric positions, i.e., (999) line items.
The most commonly used workarounds are as follows:
(1) Implement FI summarization (per note 36353).
(2) Cancel the original billing document and split it into smaller documents using different payment terms but actually with the same terms, in case of invoice verification.
This will avoid the (999) line item limit for FI postings. Please also have a look at the note 117708 and 77161.
Bye,
Muralidhara

Get no. of lines in sap script

I am using Command 'Address / End address' in sap script for printing address.
How do I get the Number of Lines we get from this command.

/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: ENDADDRESS
LINES
This specifies how many lines may be used for formatting the address.
If there are too few lines available to allow all the address data to be formatted,
then the data specified in the PRIORITY parameter are omitted.
If there is no LINES parameter and if this command is in a layout set window of
a type other than MAIN, then the number of lines available for formatting
the address are automatically calculated based on the current output position
and the size of the window.

External system returned different number of lines than received error

Hi,
While posting invoice in MIRO,i am getting the following error,
"External system returned different number of lines than received"
Please help in resolving this error.
Thanks
Srini

Hi,
Can you please check this sap note..
Note 1499319 - Ext system returned different number of lines than received
Regards

Maximum number of line items in delivery

HI experts,
For open sales orders deliveries are created through VL10c in background job
what are maximum number of line items a delivery can have and How do I ristrict the Line items?
Thanks in Advance.

In standart there is not limit of quantity items in Delivery.
But you can make limit - see Note 103334.
SAP recomended 300 pos.

Display number of line items in my report at the title bar

hi,
i would like to ask, how am i going to add in the number of line items to be display under the title bar above of the SAP. example similar to SE16, where it will show you the number of lines under the bar above.
may i know how am i going to program it for my report? thanks

Hi,
check out the following code........copy-paste....and then....................
data : it type STANDARD TABLE OF vbak,
wa type vbak.
data : ctr TYPE sy-dbcnt.
data : str(20) type c.
select * from vbak into table it UP TO 10 ROWS.
ctr = sy-dbcnt.
move ctr to str.
set titlebar 'LIST' OF PROGRAM sy-repid with str.
loop at it into wa.
skip 1.
write wa-vbeln.
endloop .
................create the title-bar 'LIST' as 'List Details : &'.
(double-click on 'LIST' .......
give 'TITLE' as 'List Details : &'. ).
run.....& get solved !!!!!
Rewards points if helpful..............

Counting lines in SAP script

Hi Gurus,
Can someone help me count the number of lines in a sap script in a page.
Thanks in advance!

Hi rajbans..
Try with this code....
/: DEFINE &COUNTER& = &Counter& + 1.
/: DEFINE &SAPSCRIPT-COUNTER_9& = 0
/: &SAPSCRIPT-COUNTER_9(+)&
I hope this will work but am not sure.
Thanks & Regards
Gopal.B

ALV_GRID How to get number of lines after filted applyed?

Hi, all!
The task is to display title in alv_grid like
"N records selected (X records on the screen)".
It means, N records in dataset and X records displayed after filter applyed by user.
But i can't get number of lines after filter applyed from the alv_grid.
Can anybody help me?
Thanks & regards,
Konstantin

Hi,
If it goes through PBO/PAI cycle after user sets the filter then in your PBO call method get_filtered_entries of CL_GUI_ALV_GRID and then do a describe statement on the table.
Number of entries in your grid table - number of entries in this filtered entries table will give you the displayed entries after the filter is set.
If it does not go through PBO/PAI cycle then register for after_user_command and I think the fcode for filter is '&FILTER' and code for the above logic in your handler method..
Hope this helps..
Sri

Number of lines in SAP B1 2007A

Similar Messages

Maybe you are looking for