Number of records in ODS

How do I know the total number of records in an ODS. There are many loads.
Thanks
NewBW

Hi,
In addition to whatever Kamal mentioned, you can goto SE16 and by putting in the ODS table name and then clicking on number of entries button, you can know the number of table entires.
Cheers,
Kedar

Similar Messages

  • How to find the number of records in ods?

    how to find the number of records in ods?
    Pls suggest the solution apart going to the table of ods and seeing the number of records.
    Is there any program or function module to see the number of records in ods?
    For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

    Hi,
    I was looking at this and found the following tables that may be of help.
    One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
    DBSTATTADA
    DBSTATTDB2
    DBSTATTDB4
    DBSTATTDB6
    DBSTATTINF
    DBSTATTMSS
    DBSTATTORA
    We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
    The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
    Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

  • How to find number of records in a cube and ODS....

    Hi,
    How do we find total number of records in a cube and ODS?
    Is there any Tcode for this ?
    From the content it is difficult to get the number of records, if it is more in number.
    Thanks,
    Jeetu

    Hello ,
              Please check the following thread,
    Number of records in a infocube
    hope it helps,
    assign points if helpful.

  • Total number of records loaded into ODS and in case of Infocube

    hai
    i loaded some datarecords from Oracle SS in ODS and Infocube.
    My SOurceSytem guy given some datarecords by his selection at Oracle source system side.
    how can i see that 'how many data records are loaded into ODS and Infocube'.
                     i can check in monitor , but that not correct(becz i loaded second , third time by giving the ignore duplicate records). So i think in monitor , i wont get the correct number of datarecords loaded in case of ODS and Infocube.
    So is there any transaction code or something to find number records loaded in case of ODS and Infocube .
    ps tell me
    i ll assing the points
    bye
    rizwan

    HAI
    I went into ODS manage and see the 'transferred' and 'added' data records .Both are same .
    But when i total the added data records then it comes 147737.
    But when i check in active table(BIC/A(odsname)00 then toal number of entries come 1,37,738
    why it is coming like that difference.......
    And in case of infocube , how can i find total number of records loaded into Infocube.(not in infocube).
               Like any table for fact table and dimension tables.
    pls tell me
    txs
    rizwan

  • Table associated with ODS that gives number of records added

    Hi Friends,
    I am looking for a db table that has information similar to that in the 'Request' tab of ODS Manage. Most importantly I am looking for the number of records added for a given request.
    Thank you for your inputs
    Deepthi

    Hi Deepthi,
    Refer the RSMONFACT table with the ODS's technical name. The field REQ_INSERT_SUM would give the no. of records added. The field IC_ID would take both cube and ODS name.
    Bye
    Dinesh

  • How to find the number of records per months  in cube

    Hi,
      how to find the number of records per months for my all cubes?
      Can i use the ListCube transaction to find totl number f records per cube monthwise ?
    Jimmy

    Hi,
    Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
    1.Copy the code into your Z<programname> from Se38.
    2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
    3.Save program.
    4.Schedule the program in background as required
    5.Create cube with infoobjects to hold no of records and Infoprovider name
    6.Load this cube based on event after the program job is done.
    Hence you can report on this cube to see no of records in  CUBE or ODS in your box.
    Please find the code below.
    Cheers,
    Kavitha Kamesh.
    types: begin of itabs ,
          tabname type dd02l-tabname,
          end of itabs.
    data: itab type itabs occurs 0 with header line.
    data: counter type i.
    data: begin of itab1 occurs 0,
    tabname type dd02l-tabname,
    counter type i,
    end of itab1.
    DATA: ITABTABNAME TYPE STRING.
    DATA: LENGTH TYPE I.
    DATA: OBJECT(30).
    data: str(6) type c.
    select  tabname from dd02l into table itab where ( tabname LIKE  '/BIC/F%' or tabname LIKE  '/BIC/A%00' )
    and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
    loop at itab.
      select count(*) from (itab-tabname) into counter.
      str = itab-tabname.
      if str = '/BIC/F'.
    LENGTH  = STRLEN( ITAB-TABNAME ).
      SHIFT  itab-tabname BY 6 PLACES LEFT.
    ELSEIf  str = '/BIC/A'.
      SHIFT  itab-tabname BY 6 PLACES LEFT.
      LENGTH  = STRLEN( ITAB-TABNAME ).
    LENGTH = LENGTH - 2.
    endif.
      itab1-tabname = itab-tabname(LENGTH).
      append itab1.
      itab1-counter = counter.
      clear itab-tabname.
      clear:  COUNTER.
    endloop.
    *********** itab1
    loop at itab1.
    write:/ itab1-tabname, itab1-counter.
    endloop.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                    =
        FILENAME                        = 'c:records.xls'
        FILETYPE                        = 'ASC'
    *   APPEND                          = ' '
        WRITE_FIELD_SEPARATOR           = ','
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    * IMPORTING
    *   FILELENGTH                      =
      TABLES
        DATA_TAB                        = itab1
    *   FIELDNAMES                      =
    * EXCEPTIONS
    *   FILE_WRITE_ERROR                = 1
    *   NO_BATCH                        = 2
    *   GUI_REFUSE_FILETRANSFER         = 3
    *   INVALID_TYPE                    = 4
    *   NO_AUTHORITY                    = 5
    *   UNKNOWN_ERROR                   = 6
    *   HEADER_NOT_ALLOWED              = 7
    *   SEPARATOR_NOT_ALLOWED           = 8
    *   FILESIZE_NOT_ALLOWED            = 9
    *   HEADER_TOO_LONG                 = 10
    *   DP_ERROR_CREATE                 = 11
    *   DP_ERROR_SEND                   = 12
    *   DP_ERROR_WRITE                  = 13
    *   UNKNOWN_DP_ERROR                = 14
    *   ACCESS_DENIED                   = 15
    *   DP_OUT_OF_MEMORY                = 16
    *   DISK_FULL                       = 17
    *   DP_TIMEOUT                      = 18
    *   FILE_NOT_FOUND                  = 19
    *   DATAPROVIDER_EXCEPTION          = 20
    *   CONTROL_FLUSH_ERROR             = 21
    *   OTHERS                          = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Hw to find total number of records

    Hi All,
    Can anyone help from these
    1. how to find total number of reports for a particular cube/ods... need step - step solution
    2. how to find total number of records for a particular Cube and ODS and Aggr's to till date.
    3.what is sandbox,mirror sys,instance of a sys..?
    4.what r TWS(Tivoli Workload Scheduler) jobs? how these r different to standard schedulers?
    Thanks in ADv
    Linda

    Hello Linda,
    As you have lots of answers on first 2 so i'll start from 3rd onward.
    3. Sandbox is mostly practice system where you can do all kind of R&D, mirror sys can be mirror image of any system depends on the organization and instance of system is again mirror image of one system.
    4. TWS is third party tool for scheduling which doesn't come along with SAP like standard scheduler as TWS has been prepared specially for this purpose so it has some more features than standard.
    Hope it helps.
    San.

  • Add number of records to a field

    I need to load data in BW ODS from flat file and want to populate one field ROWID which will hold record numbers starting from 1 if ODS is empty. This ROWID in ODS is used as Key field. I want to populate this ROWID based on number of records in flat file.
    If there are already records in ODS and say last record number is 10, next record number will be 11 and will populate rests one by one.
    So first I want to read ODS table if there are any records. If empty, ROWID will be populating from record 1 and if not empty, get the last ROWID and populate from next number.
    Help me with the code please?

    Hi,
    If the select count (*) is successfull then add 1 to the count then move it to the rowid column.
    SELECT COUNT(*) INTO V_COUNT FROM TABLENAME.
    IF SY-SUBRC NE 0.
    * If no records found then set the counter to 1.
      v_count = 1.
    ELSE.
    * If the record is found then set the row id of the table by adding 1.
      TABLENAME-ROWID = V_COUNT + 1.
    ENDIF.
    **If you want to insert multiple records within a loop.
    LOOP AT ITAB.
    * Increment the counter.
      V_COUNT = V_COUNT + 1.
    * Set the row id.
      TABLENAME-ROWID = V_COUNT.
    ENDLOOP.
    Hope this helps.
    Thanks
    Naren

  • How to calculate the number of records in Multiprovider

    Hi Experts
    I have created a report based on the multiprovider (Consist of Cube and ODS)
    I need count the number of records inside the multiprovider, how can i do it in the reporting level
    Regards
    Santosh

    Hi,
    You can use calculated key figure with replacement path variable.
    Follow This:
    1) From the context menu of the Key Figure directory, choose New Calculated Key Figure.
    2) From the context menu for the Formula Variable, choose New Variable.
    3) Choose the Processing type as Replacement Path.
    4) In the next screen, select the Characteristic Info Object based on which the number of documents is to be displayed in the report (For example: Document Number / Order Number).
    5) Choose Next.
    In the Replace Variable with drop down box, choose Attribute Value.
    In the Attribute drop down, select Characteristic Reference (Constant 1).
    6)Choose Next.
    On the Save Variable page, an overview of the settings made for the variable will be displayed.
    Confirm the entries and Choose Finish.
    7) If the Formula variable is directly assigned to the Calculated Key Figure, a warning Calculated Key Figure is not defined correctly will be displayed while executing the Query.
    8) Properties of Calculated Key Figure dialog box, assign a Technical name for the CKF.
    9) set the Time of Calculation to After Aggregation.
    Hope this will help you.
    Cheers,
    DK
    Edited by: Debasish Khaitan on May 14, 2009 1:03 PM

  • Number of records in DSO

    Can anyone tell me how to find out the total of records that get loaded to DSO? When I clicked view data, didn't find any button to display the number of records in this DSO.

    go to se11 ..give your DSO technical name...and hit F4 you should get 2 entries..
    say your DSO is ZDMDTRNS then you get to see
    /BIC/AZDMDTRNS00               ODS Object ZDMDTRNS : Active Records
    /BIC/AZDMDTRNS40               DataStore Object ZDMDTRNS : Update

  • Process Chains - number of records loaded in various targets

    Hello
    I have been trying to figure to access the metadata on the process chain log to extract information on the number of records loaded in various targets(Cubes/ODS/Infoobjects).
    I have seen a few tables like RSMONICTAB, RSPCPROCESSLOG and RSREQICODS through various threads posted, however I would like to know whether there is any data model ( relationship structure beween these and other std. tables) so that I could seamless traverse through them to get the information I need.
    In traditional ETL tools I would approach the problem :
    > Load a particular sequence(in our case = BW Process chain) name into the program
    > Extract the start time and end time information.
    > Tranverse through all the objects of the sequence(BW Process chain)
    > Check if the object is a data target
    > If yes scan through the logs to extract the number of records loaded.
    could I have a list of similar tables which I could traverse through ABAP code to extract such information?
    Thanks in advance

    Hi Richa,
    Please check these tables which may be very useful for you.
      rsseldone,
      rsdodso,
      rsstatmanpsa,
      rsds,
      rsis,
      rsdcube
    I have got a abap code where you can get all the information for a particular request.
    If you need more information goto ST13; select BI TOOLS and Execute.
    hope this helps .....
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on May 15, 2009 11:08 AM

  • Which system field returns the number of records returned after a select?

    Which system field returns the number of records returned after a select?
    a) sy-index
    b) sy-recno
    c) sy-lncnt
    d) sy-dbcnt
    e) sy-tabix

    Hi,
       SY-DBCNT
    Regards,
    Prashant

  • SQL help: return number of records for each day of last month.

    Hi: I have records in the database with a field in the table which contains the Unix epoch time for each record. Letz say the Table name is ED and the field utime contains the Unix epoch time.
    Is there a way to get a count of number of records for each day of the last one month? Essentially I want a query which returns a list of count (number of records for each day) with the utime field containing the Unix epoch time. If a particular day does not have any records I want the query to return 0 for that day. I have no clue where to start. Would I need another table which has the list of days?
    Thanks
    Ray

    Peter: thanks. That helps but not completely.
    When I run the query to include only records for July using a statement such as following
    ============
    SELECT /*+ FIRST_ROWS */ COUNT(ED.UTIMESTAMP), TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD') AS DATA
    FROM EVENT_DATA ED
    WHERE AGENT_ID = 160
    AND (TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY')+(ED.UTIMESTAMP/86400)), 'MM/YYYY') = TO_CHAR(SYSDATE-15, 'MM/YYYY'))
    GROUP BY TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD')
    ORDER BY TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD');
    =============
    I get the following
    COUNT(ED.UTIMESTAMP) DATA
    1 07/20
    1 07/21
    1 07/24
    2 07/25
    2 07/27
    2 07/28
    2 07/29
    1 07/30
    2 07/31
    Some dates donot have any records and so no output. Is there a way to show the missing dates with a COUNT value = 0?
    Thanks
    Ray

  • How to find total number of records in a BDoc?

    Dear all,
    I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
    Please help and points will be rewards!!
    Thank You
    Best Regards,
    CK

    I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
    Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
    SQL> create table emp_crap as select * from emp where 1 = 2;
    Table created.
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
      6     loop
      7        if v_cnt = 0 then
      8           v_cnt := rec.rn;
      9        end if;
    10     end loop;
    11     if v_cnt = 0 then
    12        raise zero_rows;
    13     end if;
    14   exception
    15    when zero_rows then
    16      dbms_output.put_line('No rows');
    17   end;
    18  /
    No rows
    PL/SQL procedure successfully completed.
    -- Now, let us use the table, which has the data
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from
      6          (select rownum rn, e.ename from emp e)
      7          order by 1 desc)
      8     loop
      9        if v_cnt = 0 then
    10           v_cnt := rec.rn;
    11           dbms_output.put_line(v_cnt);
    12        end if;
    13     end loop;
    14     if v_cnt = 0 then
    15        raise zero_rows;
    16     end if;
    17   exception
    18    when zero_rows then
    19      dbms_output.put_line('No rows');
    20   end;
    21  /
    14
    PL/SQL procedure successfully completed.Thx,
    Sri

  • How to limit the number of records in WebI Report

    Hi,
    I have a requirement where I need to display the WebI Report data only if the number if record is less than 65k.
    Incase if the records are more than 65k then the report should be blank and a text message needs to be displayed.
    The client dont want to set the number of records either in universe or at the edit query at the report. They want to limit once the report is executed.
    Please let me know if its possible to do it at the report level.
    Thanks in advance!!
    Best Regards
    SAP BO

    Optional prompts are not a problem.
    Assuming you first query uses the following SQL statement
    select a,b,c from t where x=y and z=@prompt(...)
    The query for checking the number of rows should use the following SQL code
    select count(*) from t where x=y and z=@prompt(...)
    The original query should be modified as follows
    select a,b,c from t where x=y and z=@prompt(...) AND (select count(*) from t where x=y and z=@prompt(...)) < 65000
    Regards,
    Stratos

Maybe you are looking for