Number of RF Profiles on a 5508

I've searched the release notes for 7.2+, but I haven't found a documented number of how many active RF Profiles a 5508 can support.
Has anyone run into a limitation of how many RF Profiles they can have?

I don't think there is any limitation mentioned for RF profiles. But as 5508 has a limitaiton of 500 AP groups, I think that is the max RF profiles you can create. (supposing each AP has its own AP group). You will not need more.
How many RF profiles you are intending to create?
Rating useful replies is more useful than saying "Thank you"

Similar Messages

  • Limitation on number of partner profiles

    Hi,
    I am working on SAP Retail implementation. As you know, in SAP Retail, we consider each store as customer and there will be seperate partner profile of type customer for each store.This is for integrating SAP with point of sale (store).
    Since number of stores are more, around 1000, i feel it's not good solution to create 1000 partner profiles. Please let me know whether there is any alternative for this and also whether there is any limitation on number of partner profiles that we can create.

    There is no limitation for partner profile creation
    Regards,
    Prateek

  • Is there any limit on number of firefox profiles that can be created?

    Is there any limit in the number of firefox profiles that can be created?
    My issue is
    I am currently doing selenium webdriver automation in linux for a device. There are 50 devices of same kind and framework will pickup a device depending on availability. I need to by pass unsigned ssl pages. I am using firefox 14.
    I have implemented following but it is not consistent.
    everytime a device is chosen
    adds cer of device to the cert file in firefox profile
    but I am getting sec_error_bad_signature very frequently.
    So I started recreating cert [delete and create if by opening firefox] file for every run.
    Now this is posing a problem if multiple devices are run at the same time. Hence I want to create separate firefox profile

    Not that I have ever found. And at one time I had over 60 Profiles, but after I hit 20 Profiles listed in the profiles.ini file the launch time for Firefox became noticeably longer on WinXP. With remote Profiles, not listed in the profiles.ini file and launched strictly from command line there was no impact on launch time.
    How or if that relates to Mac OSX is beyond my knowledge, never owned used a Mac.

  • Accidently removed my phone number from my profile...

    i accidently removed my phone number from my profile on my bt and now when i try and put in my phone number it tells me that the telephone number is the wrong number when i know it's the right number

    Hi
    I am sorry to see you are having problems
    I suggest you contact live chat at this link they should be able to help you
    http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Missing Serial number from System profiler

    I just noticed that I'm missing the serial number from my System Profiler.
    The only reason why I noticed is that I was trying to gather information about the macs on the network via remote desktop and I found several that will not allow me to gather information about the system.
    They are all the ones missing the serial number from System profiler.
    How can I add it back? Also anyone know why it is missing?

    The serial number disappears when the motherboard/logic board is switched out, because the serial number is linked to that piece of hardware.
    Authorized Apple repair tech are supposed to use some special software to input the S/N onto the logic board. Possibly they can do it for you.
     Cheers, Tom

  • I am unable to change my credit card number, because my profile shows United States therefore it does not accept the phone area code, and zip number, because I live in Switzerland. Please inform me how to do it. Many thanks.

    I am unable to change my credit card number because my apple profile shows me as a resident of the United States, although I live in Switzerland. Consequently I cannot edit my area code, zip number, State info, etc. Please advise me how to do it. Many thanks.

    Hello Luis,
    To update your billing information, you would need to change your iTunes Store country to be able to enter the information for Switzerland.  I found an article with the steps to update this:
    Change your iTunes Store country
    Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
    Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
    You can find the full article here:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • SERIAL NUMBER (#): looking in profile

    Can't seem to find my past purchases in my history....
    I tried to follow step by step... looked thru my profile (etc) - can't seem to find a list of my past purchases.
    In my history: it says "0" ?
    suggestions?
    Frustrated,
    Deborah

    Hi Femmemode,
    I checked your record and there is only 1 product registered i.e Photoshop Elements 8 for which i have sent you a Private message with the serial number.
    Thanks

  • Online Number and attached profile is wrong

    Hi,
    My online number has its own profile.  I don't know how to get to it and change it.  It has some photo that I don't want up.  The location is incorrect.  It is from 5 or so years ago when I first got that online number.  How do I change this?  Thanks, Kristin

    My IP Profile has now finaly been adjusted and speeds are getting back to normal, BT call centre in India called to say they could see there had been some work done at the exchange and it should be back to normal. I suspect it was posting to this forum that got the results as I had been trying on the phone for a month with no resolve, then 3 days on here and a result! thanks for the help.
    1. Best Effort Test:  -provides background information.
    Download  Speed
    5.83 Mbps
    0 Mbps
    7.15 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 5.83 Mbps
     For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 7.15 Mbps

  • No Serial Number in System Profiler

    Hi everyone,
    I reinstalled Tiger on my 20" iMac G4, along with more memory. I checked to see if it recognized the RAM it in the System Profiler, and noticed that the serial number of my computer is not there. The logic board has never been replaced, so what could have gone wrong? Is there a way to correct this?
    Thanks,
    -Brian
    P.S.- I downloaded the Blank Board Serializer, and followed the directions, but when I got to the booting select screen, the disc wasn't there.. am I doing something wrong with this?

    Never mind, had a friend walk me through it.
    -Brian

  • Adjusting stock off without a serial number when a profile is needed

    Hi,
    We uploaded stock into the system a while ago since then the material has become serialised, when trying to adjust stock off now we do not have a serial number listed.
    I have tried to create a serial number profile but this cannot be completed.
    Is there any other ways of clearing the stock off?

    Steven,
    I am facing similar kind of problem where i also need to make some of my stock serialised, (I was thinking of creating a new Serial Number Profile for this scenario with Procedure <b>SDLS & SDRE</b> but then in return Process MM will not integrate fully & even in case Transfer Posting; I mean there's no point of altering the whole Setup for this when it is not at all required)
    Now what you have mentioned in the serial number profile, just by changing the <b>Stock Check</b> for Serial Number from 2 to 1, System will allow me to process.
    Will it not affect my ongoing scenario where i need to have the Stock Check message as "2".
    A little explanation from your side will be quite helpful to me.
    Regards,
    N

  • Maximum number of connection profiles and group policies for Cisco ASA

    Hi,
    We have a Cisco ASA 5520 running 8.0(2) that we use only for Remote Access VPN.
    Does anyone know how many connection profiles and group policies that are supported on the box? I have not been able to find this in the manual.
    Thanks in advance for your help!
    Best regards,
    Harry

    There is no limit for connection profiles or group policies that can be configured on ASA. However the numbers do depend upon the memory available in the device as the profiles are stored in memory during execution.

  • I have a seemingly endless number of user profiles in my manager, when there should be the default, they all have some random hash and finish in "....hat" is this an issue?

    Ran my profile manager to create a second user profile for work and noticed there were a ton of profiles in there. all with seemingly random hashes, they all finished in |....hat| not sure what to make of it.

    Marcelo,
    I've been trying to load hundreds of pictures onto an SD card for digital photo frame and have the exact same problem. This also happens with a USB flash drive.
    Found a solution - stuff the files - copy the stuffed file onto card and unstuff at destination. Give it a try - would love to know if it works for you as well.

  • Authorization of XD02 on status number in status profile

    we require “Authorization Object”  through which we want to control the following.
    If sales order object status is “40” then certain users should not be allowed to use Tcode “XD02” but
    If sales order object status is “30” then same users allowed to use Tcode “XD02”.

    First of all, I dont understand why at the time of creating a sale order, you want to control master data?  If you want to have control at sale order level, then do the following
    Execute BS02 where you need to have two profiles as follows:-
    Status  Lowest     Highest       Position   Auth.code
    APPR       30         35                 1             APPR1
    DIS         35         40                 1             DECL1
    Now with the above authorisation code, ask your security team to give authorization code to respective users.  For more information on authorization profile, please search the forum. 
    G. Lakshmipathi

  • How do I change a mobile number from facetime profile on an ipad?

    I have my wife's mobile number as a facetime "You can be reahed by Facetime at". I can't change it. Is is tied to an Apple ID?

    Yes, it's tied to the Apple ID.
    Sign out in Settings > FaceTime > Apple ID and sign in with an vallid e-mail address (Apple ID)

  • Telephone number showing on my profile

    My contacts can see my real phone number on my profile and if I go to edit my profile I don't have any number added to my account.
    I just want to know how can i delete that nunber.
    Help me.
    Thank you.

    Help?

Maybe you are looking for