Number of rings on incoming calls

Is there a way to increase the number of rings on an incoming call on a Razr Maxx?  3 rings just doesn't cut it.

No, it's set by the system at 30 seconds.  Using a different ringtone sometimes helps.

Similar Messages

  • Setting number of rings for incoming call

    how does one control the number of rings regarding incoming calls before it goes to voice mail.

    You can do it manually - it's a bit of a fiddle but it works. You need to specify the length of time in *seconds* that you want your phone to ring, before voicemail kicks in. This article describes how to do it step by step - I've followed it and it works perfectly
    http://www.iphonefaq.org/archives/971382
    Hope that this helps

  • Increasing the number of rings on incoming calls

    How can I increase the number of rings on the 8800 for incoming calls?  Currently,I can set only 3 rings and that is often not enough time to get to the device.  Any help greatly appeciated.
    Solved!
    Go to Solution.

    What do you mean by you can se three ring? You can set 3 vibration for profiles settings. Number of time your deivce will ring is dependent on your carrier.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • HT201401 my phone only vibrates and will not ring on incoming calls.  How do I fix this?

    My phone only vibrates and does not ring on incoming calls.  How do I get the audible ring?  John

    on left side of your phone you have volume controll an right above that is a small button an if you see a orange or red dot you are in silent mode flip the switch up an it will remove silent .

  • HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?

    My iphone would not ring with incoming call despite ring tone was set up using sound setting.  In the beginning, it did ring. After a while it stops working.  Any idea to make it work again?

    Is the silent switch on the side of the iphone on?

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • My i4s phone does not ring on incoming calls.  The settings appear to be correct

    My i4s phone does not ring on incoming calls.  The settings appear to be correct for the phone to ring.
    Also, during a call, when I hit the speaker buttom, I can neither hear nor be heard by the other party
    Any suggestions?

    Try a factory restore, this might be a software problem so just plug into itunes and go and click the restore button. If this doesnt fix it then its a hardware problem meaning you need to head to an apple store for a replacement.

  • How do you change the number of rings before a call goes to voicemail?

    How do you change the number of rings before a call goes to voicemail.

    You can't; it's set by Verizon at 30 seconds.

  • HT4515 phone does not ring during incomming call

    phone does not ring during incomming call

    Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this.  Also ensure the volume is up.  If you've checked these and still nothing are you able to call people? do you have service?

  • I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

    I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

    Bring your phone into Apple for evaluation

  • I have installed a ringtone but phone does not ring on incoming calls

    I Have an Iphone 4S, it came with vibration set as default ringtone, I changed the ringtone but the phone does not ring on incoming calls, What is wrong?

    Also, you may want to do a reboot, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appers, so that everything is reset.

  • Iphone 4 does not ring on incoming calls

    It rang and vibrated on incoming calls it still vibrates but no ring, I don't think changed anything but im still exploring.

    I have the same issue, the phone does not ring on incoming calls, moreover, when changing the tone I can't hear the new tone, and when I press the keys on the
    keyboard I can't hear the clicks, if I use the headphone I can hear everything.
    I checked the silent switch, it is not silent, and I restrat the phone, no help.
    I have this issue immediatly after purchase and unbox
    the phone is updated to 4.3.3
    note: I use the same computer to sync to ipad.

  • Home Connect not ringing on incoming calls

    I have a Home Connect that was working well until January.  Now callers often don't get through.  The get a number of rings and the a "Caller Unavailable" message.  I don't have Verizon Voicemail.  I have voice equipment of my own.  Once this starts, it seems to last.   If, however, I make on outbound call (outbound calls always work), following incoming calls works for awhile.  We have tried *228 many times, cancel call forwarded, etc.   All the things anyone can think of.  I am an IT engineer so I think I understand troubleshooting technology.
    I have had a number of trouble tickets on this.  VZW says the "calls are getting through" but my unit isn't ringing.   We have replaced the phone and then this week replaced the Home Connect box.  No joy.  I have tried every troubleshooting idea I can think of.   Service says they haven't seen this before but I think this is the same problem many people have reported with voicemail being left even though there was no ring.  I just don't have voicemail enabled.  Incoming calls are not completing correctly.
    There is some basic problem here with the unit not properly getting the call or not ringing the phone.   The is VERY frustrating and I have missed important calls.   Again, outbound always works and I have 2 bars on the display.   Also, this just seemed to start in January.
    How do I get to the bottom of this and this this fixed?
    Frustrated,
    Scott

    There have been at least 3 trouble tickets on the number.  The most recent one should be the most complete.   I just return from vacation and my first call to the home number failed this morning.  This is REALLY FRUSTRATING.  Please help.
    Thanks,
    Scott >Personal info deleted<
    Message was edited by: Verizon Moderator

  • Ever since my wife and I upgraded to iOS 8 all of our devices now ring on incoming calls.   She also gets all of me texts. How do I stop these actions?

    Ever since I upgraded to iOS 8 all of my apple phones and IPad now ring when there's an incoming call.  My wiife now gets all my texts on her phone. How do we fix these issues?

    The phone ringing issue has to do with all of the devices being logged into iCloud with the same Apple ID and being on the same Wi-Fi network. While in proximity like that, go into Settings>FaceTime and turn off iPhone cellular calls. It is part of the continuity feature.
    The fact that you are receiving messages is some of the same doing. You need to go into Settings>Messages on both devices, go to Send & Receive and make sure that just your phone number is selected on each of the devices. The phone number for that particular device.  Do the same for Start conversation from, and make sure that it is the phone number only.

Maybe you are looking for

  • Report on sales order on hold

    hello sdn friends, how to develop an report to display to open sales orders on hold. i dont have any idea about this,please help regarding this.

  • Connection with tables of same database

    i want to access two tables of same database using JDBC. how can i do it in MS Access i have to create two connection one for each or two statement for same connection

  • HT204053 how to use same id for different stores

    How can i use the same apple id to access apps on different apple stores (in different regions)?

  • What are certificates?

    I have 'certificates' in my login keychain that indicate they have 'expired' and I cannot access certain websites.  This may be causing me problems with my email as the certificates relate to my internet provider.  Would it be o.k. to delete these ex

  • Multiple Point Hashtable Access

    Ok, I have a class that I want to store a hashtable in, and let's say that class is in Hash.java. I need one other class (Main.java) to be able to add, and possibly retrieve data from that hashtable. Then I have a class that has multiple instances of