Number of rows in an EVS dropdown

Is there a way to control how many rows are displayed in an EVS dropdown? We have a couple instances where the number of entries is 1 more than the default number of rows displayed. This forces our users to have to navigate to 2nd page of rows just so they can see the last row.
Any help would be appreciated.
Thanks!

Hey Armin. Thanks for your reply. I suspected that would be the answer. : (
Good suggestion about OSS. Don't know why I always forget that.
Thanks again.

Similar Messages

Maximum number of rows and columns in data form

Hi,
I wanted to know if there is a limitation to the number of rows and columns that can be displayed in a data form, in Hyperion planning 11.1.2.1 ?
And what would be the most appropriate number of rows and columns to be included for optimum performance.
Thanks.

Hi,
While its a fun fact to determine how much one can stuff into a web form, the reality is: how much can a user reasonably consume in a web form?
And what would be the most appropriate number of rows and columns to be included for optimum performance
You will find that the answer to this is by "what design makes a web form most usable?" And no, the users don't really know what they want from a design perspective, they see it in their head, but usually what they ask for is something that would look entirely different (huge).
The next thing to think about is the use of member selection functions in the page axis. IDescendants(Entity) in a dropdown could cause issues just as easily as too many rows - and again make the drop down unusable for a user.
If your question is a bit more technical, then consider this (somewhat oversimplified): Web forms are constructed by a process on the server. Objects are created based on the form's definition and used by the process that builds the form. The process uses Cartesian looping (lots of iterations) to construct the form cell by cell, starting at the top left and finishing up in the bottom right. If the form has a million cells on it, then the loop and all the code within it runs a million times. The capability of the server has a lot to do with how well it can handle this request, and how many it can handle at one time.
The result of this is gobs of HTML and JavaScript. All of this has to be sent over a network to the requesting client. The client starts receiving the web page code and has to render it in the browser and run the JavaScript. The ability to do this is limited by the browser, the OS, and the hardware that the client is running on.
And that's just rendering the page for use.
Now it has to be interacted with on the client machine, and changes parsed, packaged, and sent back to the server.
So the technical answer is, there can be many limitations to how many rows and columns a data form can have - none of which can truly be anticipated by anyone. This is why I put the part about usability first in this post.
Regards,
Robb Salzmann

ERROR: update_indexterms failed compute the number of rows

While crawling I got the following error:
19:11:18:825 8 cache_0 EQG-30056: SQL execution exception
19:11:18:825 8 cache_0 java.sql.SQLException: ORA-20000: Oracle Secure Enterprise Search-Fehler
EQG-60503: Task-AusfÃ¼hrungsfehler (ID = 1)
EQG-50000: Interner Fehler, Argumente : update_indexterms failed compute the number of rows
User-Defined Exception
ORA-00933: SQL-Befehl wurde nicht korrekt beendet
ORA-06512: in "EQSYS.EQ_ERR", Zeile 186
ORA-06512: in Zeile 1

There is a metalink note 363272.1 that tracks the issue. The workaround is:
Workaround: Set the machine locale to English.
For example, on Windows:
1. Start - Control Panel - Regional and Language Options
2. Choose English (United States) in dropdown list in Standards and formats
3. Click OK
4. Stop Oracle SES service by All Programs - Oracle SES location - Stop Oracle SES
5. Start Oracle SES service by All Programs - Oracle SES location - Start Oracle SES
where Oracle SES location is the location where Oracle SES is installed
For example, on Linux:
setenv LANG en_US
setenv LC_ALL en_US
searchctl stopall
searchctl startall
Please check the orginal document for more details. Also, I think the SES readme has this issue well documented.

How To Restrict Number Of Rows For Multiple Group In Report Output

Hi ,
I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
Below is the XML tag i am using -
First i have declare the variable to restrict the rows -
<xsl:variable name="lpp" select="number(7)"/>
<xsl:variable name="lpp1" select="number(5)"/>
<xsl:variable name="lpp2" select="number(3)"/>
For Each -
<?for-each:PAYSLIP?>
<xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
<xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
<xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
<?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
<?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
<?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
Deduction Group -
<?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Earning Group -
<?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Tax Group -
<?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Please let me know in case additional detail is require.
Thanks in Advance.
Thanks,
Harsh
Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

variable lpp2 is declare to restrict EarTaxLines -
<xsl:variable name="lpp2" select="number(2)"/>
This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

How to set the number of rows displayed in a classical report at runtime?

Hi,
Our customer has several standard client hardware configuration and would like to enable end users to choose their 'display profile' at login time. This 'display profile' would contain predefined values for these hardware configurations and supposed to set various paramters that should define the number of rows displayed in a classical report region.
I tried to provide parameters on the report region but it refused to accept anything but numerical values. Is it possible to do this?
Regards, Tamas

The link is to the closest linkable point in the documentation to the description of the Number of Rows (Item) attribute.
It sounds like you have been trying to enter—unsuccessfully—an item name or substitution string into the Number of Rows attribute. The Number of Rows (Item) attribute is the one that actually allows you to do this. Click on the flashlight icon beside it to get a list of items from the application.

About the number of rows used to map data in Xcelsius

Hi Everyone:
I am using web services to fetch data into Xcelsius. The information I got from web service will increase in time and what I suppose is when I run out of rows to get all data I must open my Xcelsius model and select a greater range of rows on each component to get all the data that the web service is bringing.
Is there an alternative to avoid modifying ranges of data in crontrollers when rows mapped are not enough for the data you are fetching from a web service?
It is a bit confusing, I hope I've been clear enough. I really really will appreciate your opinions. If possible give me technical explanations.
Thank you,
Skull
Edited by: skull_buck on Aug 6, 2009 7:40 PM

Hi Greg
Thanks for your fast reply.
What you suggested is exactly what I am doing now, and also I increased the number of rows allowed to map en Xcelsius which are 512 by default.
I would like to know now, how many rows are advisable to increase? Because I am using some components and you must specify for each one a certain number of rows.
I test mapping 3000 and even 6000 rows but the model is too slow and I was not able to export the swf file in any format.
Thank you again,
Skull

How to find accurate number of Rows, and size of all the tables of a Schema

HI,
How to find the accurate number of Rows, and size of all the tables of a Schema ????
Thanks.

SELECT t.table_name AS "Table Name",
t.num_rows AS "Rows",
t.avg_row_len AS "Avg Row Len",
Trunc((t.blocks * p.value)/1024) AS "Size KB",
t.last_analyzed AS "Last Analyzed"
FROM dba_tables t,
v$parameter p
WHERE t.owner = Decode(Upper('&1'), 'ALL', t.owner, Upper('&1'))
AND p.name = 'db_block_size'
ORDER by 4 desc nulls last;
## Gather schema stats
begin
dbms_stats.gather_schema_stats(ownname=>'SYSLOG');
end;
## Gather a particular table stats of a schema
begin
DBMS_STATS.gather_table_stats(ownname=>'syslog',tabname=>'logs');
end;
http://www.oradev.com/create_statistics.jsp
Hope this will work.
Regards
Asif Kabir
-- Mark the answer as correct/helpful

Number of Rows Displayed in a SQL Report Region

Hi,
Just wondering whether it is possible to control the 'Number of Rows' displayed under the 'Layout and Pagination' section within the Report Attributes page.
Basically need to know if I can programmatically control this or even better, can it be customized by the user as the user may want to see say 15 rows, 200 rows or 'All' rows of a certain region on the page. FYI, I have three different report regions on one page and want to give the user the flexibility to modify the number of rows displayed per region.
Thanks.
Tony.

Tony,
you can find that in this how-to document:
http://www.oracle.com/technology/products/database/htmldb/howtos/howto_report_rownum.html
Denes Kubicek

Merging two separate Tables into One - different number of rows

Hi. I have a problem. Oracle 10.2.0.4.0
7 years ago when i was learning how to query my teacher told me that is possible to creata some kind of report where results could be combined in 1 view(report) witch in different variable could have different number of rows.
I just remember that there is needed to use group by function and some join?
Please help
In link there is a sample sample view
I need to combine Table A using D variable with Table B to become Wynik(result)
Tables create
CREATE TABLE "TABELA_A" ( A NUMBER,B NUMBER,C NUMBER,D NUMBER ) ;
INSERT INTO "TABELA_A" (A, B, C, D) VALUES (123, 1, 70, 999)
INSERT INTO "TABELA_A" (A, B, C, D) VALUES (123, 2, 80, 999)
INSERT INTO "TABELA_A" (A, B, C, D) VALUES (234, 1, 100, 111)
INSERT INTO "TABELA_A" (A, B, C, D) VALUES (456, 1, 10, 222)
CREATE TABLE "TABELA_B" ( D NUMBER,E VARCHAR2(255),F NUMBER ) ;
INSERT INTO "TABELA_B" (D, E, F) VALUES (999, 'A', 1);
INSERT INTO "TABELA_B" (D, E, F) VALUES (999, 'B', 1);
INSERT INTO "TABELA_B" (D, E, F) VALUES (999, 'B', 3);
INSERT INTO "TABELA_B" (D, E, F) VALUES (999, 'C', 1);
INSERT INTO "TABELA_B" (D, E, F) VALUES (111, 'A', 1);
INSERT INTO "TABELA_B" (D, E, F) VALUES (111, 'C', 2);
And to become result - in picture
[http://i303.photobucket.com/albums/nn153/katanbutcher/pytanko.jpg?t=1306152636]
Thank's for help
Edited by: 860710 on 2011-05-23 05:42
Edited by: 860710 on 2011-05-23 05:54
Edited by: 860710 on 2011-05-23 06:07

Maybe if you follow the instructions mention in this post you may get some help. For example, I wouldn't try to click on the link provided by you.
SQL and PL/SQL FAQ
Regards
Raj

How to limit the number of rows in a report

I have several reports with a number of parameters - date ranges etc.
Depending on the parameter values selected by the user the reports can return thousands of rows.
I would like to limit the number of rows returned to, say, 500. If more than 500 rows are returned by the query then display an error message requesting that the user enter more specific parameters.
Ideally for performance reasons it would be good to catch the error before the datafile is generated, but I don't know if this is possible. Alternatively a check in the template might do the job - using COUNT on the group?.

Hi Hugh,
In your query, you got to add rowum < 500 or some sort of DB specific limit to the row being returned,
this will help to stop the report to get more than 500 records and the report template wont have any restriction.
or
you can do that in template too, but i would not recommend.
In these both cases or in any case, you cannot give any meaningful error if it exceeds N rows,there is no option like this till now.

Different number of rows for different columns in JTable

hi
I need to create a JTable with different number of rows for different columns...
Also the rowheight should be different in each column...
say there is a JTable with 2 columns... Col1 having 5 rows and column 2 having 2 rows...
The rowHeight in Col2 should be an integer multiple of Rowheight in Col1
how do I do this ??
can anybody send me some sample code ?????
thanx in advance

How about nesting JTables with 1 row and many columns in a JTable with 1 column and many rows.
Or you could leave the extra columns null/blank.
You could use a GridBagLayout and put a panel in each group of cells and not use JTable at all.
It would help if you were more specific about how you wanted it to appear and behave.

How to get number of rows

Hi!
Can someone tell me how to obtain the number of rows returned by a query?
I tried to use getFetchSize() but it seems to always return 0 for my query.
THANKS in advance!
ResultSet testRS = Stmt.executeQuery(testStmt);
int size = testRS.getFetchSize();
System.out.println("size = " + size);
Wo Lay

To get the number of rows returned, you have to loop
through the result set, or do a "select count" (which
is more efficient since it doesn't have to pass the
rows across the network) ...Looping around the entire result set is not very performance efficient. Then agin if you use count (*) you actually execute an extra query.
The best thing you can do is:// assume res is your result set.
res.last();
int rows = res.getRow();This way you only have to execute one query and you don't really need to loop around the entire result set. Of course you will have to have a scrollable result set, if this is supported by your DB.
Hope that helped.
afotoglidis

How to count number of rows as well as the sum of a column in a procedure

Hi, i need to count the number of rows a sql returns in a procedure.
as well as i need to sum up a different column.
i need the following output:
count the number of rows output
and sum the total column
code:
procedure samba_extraction (p_errmsg IN out varchar2
,p_errcode IN out NUMBER
,p_filename in varchar2
,p_start_date varchar2
,p_end_date varchar2)
is
file_handle utl_file.file_type; -- file handle of os flat file
-- cursor to select the c_samba_resources
cursor c_samba is
select
lpad(h.contract_number,15,'0') contract_number
,h.short_description description
,h.attribute_category context_value
,h.attribute7 samba
,h.attribute8 samba_number
,h.start_date start_date
,h.end_date end_date
,h.sts_code active_inactive
,l.price_negotiated price
,l.tax_amount tax
,LTRIM(to_char((l.price_negotiated + l.tax_amount),'00000000.00')) total
from
oks_auth_headers_v h
,oks_auth_lines_v l
where h.id = l.chr_id
and ((h.start_date <= (p_end_date))
and (h.end_date >= (p_start_date)))
and h.attribute7 = 'SAMBA'
-- and h.sts_code = 'ACTIVE'
and ((h.attribute_category = 'SUBSCRIPTION.DURATION')
or (h.attribute_category = 'SUBSCRIPTION.VALUE')
or (h.attribute_category ='SUBSCRIPTION.QUANTITY'));
l_output varchar2(1000);
l_counter varchar2(11);
l_total varchar2(11);
l_filename varchar2(30);
begin
if p_filename IS NOT NULL then
-- l_batch_no := 'T';
l_filename := p_filename || '.txt';
-- open file to write into and obtain its file_handle.
file_handle := utl_file.fopen('/usr/tmp',l_filename,'W');
fnd_file.put_line(fnd_file.log,'The '|| l_filename||' file you have requested has been placed in the usr/tmp directory');
for l_info in c_samba
loop
-- l_output := null;
l_output := l_info.samba_number||'+'||l_info.total||l_info.contract_number;
utl_file.put_line(file_handle,l_output);
fnd_file.put_line(fnd_file.output, l_output);
dbms_output.put_line(l_output);
end loop;
else
p_errmsg := ('Please enter a filename for this file ');
write_log('UPDATE : ' ||p_errmsg);
end if;
-- close the file.
utl_file.fclose(file_handle);
exception
when no_data_found then
dbms_output.put_line('no_data_found');
utl_file.fclose(file_handle);
when utl_file.invalid_path then
dbms_output.put_line('UTL_FILE.INVALID_PATH');
utl_file.fclose(file_handle);
when utl_file.read_error then
dbms_output.put_line(' UTL_FILE.READ_ERROR');
utl_file.fclose(file_handle);
when utl_file.write_error then
dbms_output.put_line('UTL_FILE.WRITE_ERROR');
utl_file.fclose(file_handle);
when others then
dbms_output.put_line('other stuff');
utl_file.fclose(file_handle);
end samba_extraction;
end xx_samba;

Hi,
Initialise one variable TOT_ROWS to 0.
Then in the for loop
tot_rows := tot_rows + +1 ;
so after for loop the value in the tot_rows will be the total records..
If u want it to get this value in the calling procedure of this , just declare tot_rows parameter as out parameter.
For sum of a column:
Initialise a variable sum_col to 0.
In the for loop
sum_col := sum_col+I_info.column_name
aprameter if u wish return this value as out..
I think this wil give u the o/p..
cheers,
Sivarama

How to get number of rows and columns in a two dimensional array ?

Hello,
What would be the simplest way to get number of rows and columns in a two dimensional array represented as integers ?
I'm looking for another solution as For...Each loop in case of large arrays.
Regards,
Petri

Hi Petri,
See a attached txt file for obtaining two arrays with upper and lower index values
Regards
Ray
Regards
Ray Farmer
Attachments:
Get2DArrayIndex.txt ‏2 KB

How to get number of rows return in SELECT query

i'm very new in java, i have a question:
- How to get number of rows return in SELECT query?
(i use SQL Server 2000 Driver for JDBC and everything are done, i only want to know problems above)
Thanks.

make the result set scroll insensitve, do rs.last(), get the row num, and call rs.beforeFirst(), then you can process the result set like you currently do.
         String sql = "select * from testing";
         PreparedStatement ps =
          con.prepareStatement(sql,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
         ResultSet rs = ps.executeQuery();
         rs.last();
         System.out.println("Row count = " + rs.getRow());
         rs.beforeFirst();~Tim
NOTE: Ugly, but does the trick.

Number of rows in an EVS dropdown

Similar Messages

Maybe you are looking for