Number of supported VRF instances on a 3750 Metro

Hello,
When the 3750 metro first came out I believe there was an IOS limitation of 26 VRFs. Does anyone know whether this has now changed at all.
Thanks.
Eddie

Hi Eddie,
I believe that these restrictions remain (12.2(35)SE):
The switch supports a total of 26 VRFs and VPNs.
http://www.cisco.com/en/US/products/hw/switches/ps5532/products_configuration_guide_chapter09186a0080773043.html
Regards,
Alexander

Similar Messages

  • 3750 Metro series do not dot1q trunking??

    Folks,
    I have a 3750 metro series switch and i am trying to use it to do inter vlan routing. I do not see an option for "encapsulation dot1q" under sub interface?? why is it not supported??
    Thanks

    Navin,
    The 3750 Metro series switch does not support Layer 3 trunks; you cannot configure subinterfaces or use the encapsulation keyword on Layer 3 interfaces. The switch does support Layer 2 trunks and Layer 3 VLAN interfaces, which provide equivalent capabilities.
    For more information, see the note under Table 12-5 on this page: http://www.cisco.com/en/US/products/hw/switches/ps5532/products_configuration_guide_chapter09186a00803960dc.html#wp1326724.
    Cheers,
    Josef.

  • What Image of 3750 supports VRF lite?

    Folks,
    I want to implement VRF lite in my network, we have a bunch of 3750's in out network at the edge. Cisco doc says that 3750 support vrf lite, but i tried to download
    Base
    ip services
    advanced service image
    for the 3750, and i still do not see the VRF lite commands?
    Any ideas?

    According to the IOS Feature Navigator, any EMI image from 12.1(11)EA1 supports VRF lite.
    Please refer to the following URL to access the IOS Feature Navigator:
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    Hope this helps,

  • URGENT: MPLS P/ PE support on 7600/Sup720-BXL and 3750 Metro switch

    I'm need to design a MPLS network for a Cable Operator.
    They will start small with some Cisco CMTS doing MPLS-PE and needing only two devices to aggregate these PE and delivering Services (Internet connection, VoD, ...) , so they will need to work has P/PE.
    For that I want to know if it's possible to:
    1 - Use 3750 Metro and 7600/Sup720-BXL as P and PE
    2 - Who many customers (L2VPN/VLANs and/or L3VPN/VRF) can they support?
    Searching in CCO I found these values/features but, need URGENT to check:
    1 - sup720-bxl supports P and PE but 3750 only PE?
    2 - 3750 supports 1024 VLANs and 8,192 MPLS labels but no values on L3VPN/VRF?
    SUP720 supports more than 1000 VRF?
    Really need urgent HELP on this design/capabilities for these two devices.
    Thanks in advance,
    MP
    Network Consultant - CCIE

    before you even get anywhere close to the numbers of L2/L3 on a 7200 I would seriously consider asking what throughput you can get through a 7200 with MPLS, QOS, L3vpns and L2vpns configured. I have done this testing already but dont think it is appropriate to quote the figures publically.

  • TS1559 I bought my iphone 4s in usa apple store but when i write my serial number to support center i see warning like that. What is the problem ? Our records indicate that this product has been replaced. Please provide the serial number for your replacem

    I bought my iphone 4s in usa apple store
    ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
    i want to support for this issue.
    but when i write my serial number to support center i see warning like that. What is the problem ?
    Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

    Nobody here would know.  Contact Apple and ask them

  • Estimating number of users per instance

    hi gurus,
    This is a simple but critical question for me. How to estimate number of users per instance.
    example if database size is 1.2 terrabytes then how many users can we have? and how can we know the num of users for a exixting instance?
    Reddy

    Hi Reddy,
    Basically it is sizing question, and it depends on the hardware you have, the performance level you expect, and how well the system is tuned...
    Transaction ST07 shows how many users are currently on the system.
    Thank you,
    Victor

  • The verification lists my card data and address etc. correctly but I need to keep entering the card security number.  Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue?  Seems to be something to do

    The verification lists my card data and address etc. correctly but I need to keep entering the card security number.
    Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue?
    Seems to be something to do with a new security check they have put in the system that does not work correctly and support is totally incapable of helping me out.
    wth am i gonna do im feed up and on top i have no one to help me been calling itunes for days now im ****** off to the maxxx

    I've been jumping through the hoops with Apple Support on this issue....first time I called they said I should try updating from IOS 4.0 to 4.1....tried that and the issue still persisted...then I called back to update the ticket and get the next steps...they said that the Bank is rejecting the request for verification and that is why it keeps prompting (which doesn't make sense since the confirmation seems to go through successfully). The rep also contacted the iTunes dept and had them run the verify manually and said the bank rejected it. The next hoop they want me to jump through is calling the bank to verify that the account is in good standing and inquire about the rejected requests. I'm fairly certain the bank account is in good standing....will verify of course....but I find it hard to believe that all the people who have posted here, plus countless others that are experiencing the same issue but haven't, are ALL having banking issues in the last 24hrs...I'm more convinced there is a disconnect on the back end between iTunes and Financial institutions...
    I'm not sure I buy in to everything I was told...he also told me he has had several calls on this issue and they were all told to check with their banks. He could not verify that any of his past calls were resolved. Needless to say I'm not 100% believing everything he told me....weak response from Apple support on this issue so far.

  • Is there a predifined column which shows the number of support messages

    Hi,
    In test management work list (STWB_WORK), is there a predifined column which shows the number of support messages raised against a message (Yellow spark symbol), there is no ALV layout defined for this scenario, please advice is there any configuration required for this column to be displayed or a development has to be carried out?
    Regards
    Prakash Kalluru

    Hi
    Have you ever used the tab Messages in the same transaction
    It will list all the messages
    since its ALV display you can filter as per requirement
    Hope this solves ur prb
    Regards
    Prakhar

  • ICM 8.0(2) - Number of supported agent mode connections [2000] by one CTI OS Server pair has been reached

    Hi,
    I have an environment with ICM 8.0(2) integrated with UCM 8.0.2.40000 and IPIVR 8.02.11005.
    The system are working properly but sometimes all the agents are forced to disconnect on the CTI OS Toolkit and all the functions are disabled then the agents just are able to log in again after restart and reset the extension mobility.
    After analyze the logfiles of the CTI OS Server, I found the following messages:
    16:55:04:171 unknown-ctios Trace: [agent.5000.5053] QUERY_AGENT_STATE_CONF ( eTalking ) : (PeripheralID:5000
    AgentState:eTalking NumSkillGroups:2 MRDID:1 ICMAgentID:5097 AgentMode:1
    MaxTaskLimit:1 NumTasks:1 AgentExtension:78112238 AgentID:5053
    AgentInstrument:78112238 UniqueObjectID:agent.5000.5053
    MessageID:eQueryAgentStateConf AgentAvailabilityStatus:0
    SkillGroup[1]:(SkillGroupNumber:1742 SkillGroupID:5000 SkillGroupPriority:0
    SkillGroupState:7) SkillGroup[2]:(SkillGroupNumber:37 SkillGroupID:5151
    SkillGroupPriority:0 SkillGroupState:4))[CtiosBaseAgentObject,
    T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 29262]
    16:55:04:171 unknown-ctios Trace: CServiceBroker::ProcessEvent(): CLIENT_EVENT_REPORT_CONF
    16:55:04:187 unknown-ctios Trace: --> RCV CLIENT[15494] INFO MESSAGE, length: 86
    16:55:04:187 unknown-ctios Trace: ClientMgr[1]::IdentifyClientRequest, Client[15494]: Changing ClientID
    ["15494"->"MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)"].
    16:55:04:187 unknown-ctios Trace: --> RCV CLIENT[MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)] INFO MESSAGE,
    length: 277
    16:55:04:187 unknown-ctios Trace: CRequestBroker::OnRequest(), ClientConnectionID[15494]::WARNING!!! Number of
    supported agent mode connections [2000] by one CTI OS Server pair has been
    reached.
    16:55:04:187 unknown-ctios Trace: [agent.5000.5046] QUERY_AGENT_STATE_REQ : (PeripheralID:5000 PeripheralType:0
    AgentState:eUnknown AgentExtension:78112258 AgentID:5046
    AgentInstrument:78112258 AgentPassword:123456 SkillGroups:()
    UniqueObjectID:agent.5000.5046 MessageID:eSetSessionModeRequest
    ClientAgentTemporaryID:agent.1357919595 ClassIdentifier:1 IsSupervisor:0
    LastError:(dotNET_Sess(10041842)_EvtThd(164):0) ConnectionMode:1
    CILConnectionID:15494 AutoLogin:0 SavedAgentState:9 WaitingforRecovery:0
    SavedLoginInfo:() NonClientRequest:1 CurrentProfile:(null)
    IsAgentTeamMember:0 SavedAgentId:5046
    OriginatingClientID:MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)
    SilentMonitorTargetAgentUID:(null)
    SilentMonitorCallUID:(null))[CtiosBaseAgentObject,
    T_BASE_AGENT_QUERY_AGENT_STATE_REQ, 29262]
    16:55:04:187 unknown-ctios Trace: [agent.5000.5046] QUERY_AGENT_STATE_CONF ( eAvailable ) : (PeripheralID:5000
    AgentState:eAvailable NumSkillGroups:2 MRDID:1 ICMAgentID:5080 AgentMode:1
    MaxTaskLimit:1 NumTasks:0 AgentExtension:78112258 AgentID:5046
    AgentInstrument:78112258 UniqueObjectID:agent.5000.5046
    MessageID:eQueryAgentStateConf AgentAvailabilityStatus:1
    SkillGroup[1]:(SkillGroupNumber:1742 SkillGroupID:5000 SkillGroupPriority:0
    SkillGroupState:3) SkillGroup[2]:(SkillGroupNumber:48 SkillGroupID:5362
    SkillGroupPriority:0 SkillGroupState:3))[CtiosBaseAgentObject,
    T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 29263]
    16:55:04:187 unknown-ctios Trace: CServiceBroker::ProcessEvent(): CLIENT_EVENT_REPORT_CONF
    16:55:04:203 unknown-ctios Trace: --> RCV CLIENT[15484] INFO MESSAGE, length: 89
    16:55:04:203 unknown-ctios Trace: ClientMgr[1]::IdentifyClientRequest, Client[15484]: Changing ClientID
    ["15484"->"MV4702-4160-dotNET_Sess(48095888)_EvtThd(1062)"].
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6984-4620-dotNET_Sess(24727327)_EvtThd(529)], CLOSE
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV11761-2720-dotNET_Sess(62684179)_EvtThd(475)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV11761-2720-dotNET_Sess(62684179)_EvtThd(475)][0x4dcdc08, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6977-4236-dotNET_Sess(46292023)_EvtThd(158)], CLOSE
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close: CLIENT[MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)][0x576e630,
    CLOSE(), Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6984-4620-dotNET_Sess(24727327)_EvtThd(529)][0x4f98000, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6973-5644-dotNET_Sess(31599171)_EvtThd(1119)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6973-5644-dotNET_Sess(31599171)_EvtThd(1119)][0x66ba9f0, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6977-4236-dotNET_Sess(46292023)_EvtThd(158)][0x7572c10, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV11761-2720-dotNET_Sess(2094081)_EvtThd(773)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV11761-2720-dotNET_Sess(2094081)_EvtThd(773)][0x5ecf2d8, CLOSE(),
    Calling OnConnectionClosed()
    16:55:04:250 unknown-ctios Trace: ClientMgr[1]::OnConnectionClosed,
    Client[0x0576E630][MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)]
    16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6812-6004-dotNET_Sess(33915130)_EvtThd(140)], CLOSE
    16:55:04:250 unknown-ctios Trace: CClient::Close:
    CLIENT[MV6812-6004-dotNET_Sess(33915130)_EvtThd(140)][0x5508cc8, CLOSE(),
    Calling OnConnectionClosed()
    The message that caught my attention was the following: 16:55:04:187 unknown-ctios Trace: CRequestBroker::OnRequest(), ClientConnectionID[15494]::WARNING!!! Number of supported agent mode connections [2000] by one CTI OS Server pair has been reached.
    But in our environment has only 250 agents
    Anyone seen this before? Thanks very much

    Hi Gergely,
    I analyzed the following situation: when the agent logs in the CTI OS Toolkit the client opens a lot of sessions with differents ports.
    Like the following example:
      TCP    bbaproggerp1:42028     mv8011:4544  ESTABLISHED
      TCP    bbaproggerp1:42028     mv8011:4545  ESTABLISHED
      TCP    bbaproggerp1:42028     mv8011:4546  ESTABLISHED
      TCP    bbaproggerp1:42028     mv8011:4548  ESTABLISHED
    Where mv8011 is the hostname of the machine and 4544,4545,4546 and 4548 are the ports of CTI OS Client connected on port 42028.
    When the agent disconnect of the application just one connection is closed then  if it logs again another two connections will be open.

  • Restrict number of stateless bean instances

    i need to restrict number of stateless bean instances. Am working on EJB3.0 and jboss.
    I have even modified the following in standardjboss.xml but, still am not able to restrict.......
    <container-pool-conf>
    <MaximumSize>10</MaximumSize>
    <strictMaximumSize>true</strictMaximumSize>
    </container-pool-conf>
    Is there any other way?
    Thank in advance

    all the config files are different in jboss for the ejb3 stuff (rather annoying). assuming you want to make this change globally, you need to alter the deploy/ejb3-interceptors-aop.xml file. at the end of the "Stateless Bean" domain there is an annotation element which defines the pool configuration (it's basically a copy of the java annotation embedded in the xml file).

  • 3750 metro series switch does not support dot1q trunking?

    Folks,
    I have a 3750 metro series switch and i am trying to use it to do inter vlan routing. I do not see an option for "encapsulation dot1q" under sub interface?? why is it not supported??
    Thanks

    Narvin,
    if you want inter-vlan routing, the interface Vlan nn itself specify vlan.I think you confuse with router subinterface where you must specify what Vlan a subinterface must use ( and encaps type ). Encaps type ( dot1q or ISL ) is used at trunk level, and whatever trunk use you can do intervlan routing using vlan interface.
    maurizio

  • 3750 metro switch does not support Dot1q??

    Folks,
    I have a 3750 metro series switch and i am trying to use it to do inter vlan routing. I do not see an option for "encapsulation dot1q" under sub interface?? why is it not supported??
    Thanks

    Navin,
    This question has been answered under "Network Infrastructure".
    Josef.

  • HT4061 what is the phone number for support?

    where is the phone number for support without the serial number? i can't get into my phone at all to get it. i was doing an update and it said it couldn't be updated and i lost my phone. it's now in recovery mode and i can't use it at all. this is a brand new phone too!

    Hi,
    When I need support I use the Apple support number 0844 545 9966
    I receive great service and my issues are handled verry efficiently by the customer support team at apple.
    Good luck with your new phone I'm sure they will help you.

  • Is there a phone number for support?

    is there a phone number for support?

    Try this link to get you support: What are my contact options?.

  • Using Clustered ASAs in Transparent mode to support VRF based Network ?

    Hi Guys,
    I'm investigating the ways that I can use 2 x ASA (5525x) to accommodate Multi-tenancy situation with overlapping addresses. Unfortunately in this particular scenario we have to stick with 5525x firewalls.
    The ASAs are going to be placed in north-south traffic path between 2 routers and these routers need to be configured with multiple VRFs to segregate the traffic for each tenant with overlapping IP subnets ( We are not looking at NAT as a workaround for the time being).
    As we know, this ASA model won't support VRFs so we can't use the ASA as a intermediary routing hop and therefore this is not an option.. and using security contexts per VRF seems not scale-able enough (correct me if I'm wrong). So my thinking is that, if we put the ASAs in to the transparent mode and just use the ASAs as a layer 2 interconnect (configured with different VLANs connecting VRFs served by top and bottom routers)  I should be able to go up to maximum of 50 VRFs (since 5525x only supports 200 VLANs).  
    I'm also planning to use the 2 ASAs in a cluster mode to aggregate the bandwidth of both ASAs for better throughput.
    So I need to clarify following with you guys.. 
    1) Can I actually do this or am I missing something.
    2) Are there any limitations that I might run in to with this setup
    3) Is there anyone out there who's doing the same thing or can you think of a better way to tackle this scenario (with same hardware and requirements)
    4) Instead of using clustering, can I use simple Active/Stanby pare and still configure transparent mode and use it that way ?
    Appreciate your input.
    Thanks
    Shamal 

    Is any expert out there who can answer my query ?. Much appreciated.

Maybe you are looking for

  • Remote Mgr Console java not working 64bit

    Is anyone else having issues using the java based console screen in Remote Manager (I assume this what people call "NoRM"?) on a 64 bit Windows 7 machine? We just upgraded our workstations, these are brand new Dell Precisions, and now I can't manage

  • Help with Batch Capturing, Timecode Issues?

    Hi Final Cut Pro Pro's. I've just come over from Avid. I have a problem with capturing - I have a lot of tapes to capture and there is no way I will make deadline doing it by individual capture - I need to batch capture. My tape shows no timecode bre

  • How to reduce the number of bytes for a picture

    I want to reduce the number of bytes used for a picture to be sent to a site like Ebay or craigslist. I son't see any options in Iphoto for this purpose.

  • Execute immediate in reports

    Greedings, How is it possible to do it in the follow query? DECLARE temp VARCHAR2(170); temp2 VARCHAR2(50); query1 VARCHAR2(50); BEGIN query1:='Table1'; temp:='Select distinct amount from '||query1||' where amount= '||'30'; EXECUTE IMMEDIATE temp INT

  • How to set a DFF Field as a mandatory field dynamically (Forms 4.5)

    For example i need to set one field (in DFF) as mandatory for some order types in the standard order entry screen. I tried set_item_property('ORDER.ATTRIBUTE1',REQUIRED,PROPERTY_TRUE); but i a mgetting error as " can not set ORDER.ATTRIBUTE1 of NULL