Number of times a service order has been printed

Hi,
Is there a standard report in SAP that allows you to see how many times service orders have been printed? I know you can look in the action log for each individual order and count the 'Printed' entries, but is there a more efficient way of doing this for a number of orders?
The data is stored in table PMPL, where a new record is create every time an order is printed. Although it is possible to extract the data from here and manipulate it to achieve the desired results, is there an easier way? Preferably which end users will have access to.
Thanks.

Hi Richard,
there is a report for services Tcode : MSRV1 ,
but as per my knowledge there is no standard report to show how many orders have been printed.
may be a program can be written which can check the field COPY_NR and give you the desired results.
Hope this helps
Cheers

Similar Messages

Sales order line item cannot be rejected as service order has been archived

Iam trying to reject a line item in a sales order with a "AP cancel line item" reason, but it does not allow me saying that the service order does not exist. The service order has been archived earlier. Is there any solution or workaround of this problem ?

Program zz_clear_aufnr can be used to resolve this.

Can I find the number of times the recorded meeting has been viewed?

In Adobe Connect is it possible to find the number of views after a recorded meeting is made public? Under meeting dashboard it keeps track of these views for 30 days but I can not seem to find anywhere under the reports where this information is located.

If you move the recordings to the Content Library, then you can pull the standard content reports for it, which will tell you number of views.

How can i find the number of times my volume license has been activiated?

Volume licensing activations.

Try contacting Adobe support to see if they can help.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

My Broadband order has been cancelled 11 times so ...

I am at the end of my tether with BT.
Since the 11th of November I have been trying to migrate to BT Broadband -I am still trying.
I have been fobbed off with so many excuses now I don't know what to do next.
The lack of communication from a communications company is unbelievable.
A Line Manager told me two days ago that it was not an issue any more and that my connection would be activated on Monday the 15th.He promised to phone me back yesterday -luckily I did not hold my breath waiting for his call.
For over an hour this morning I have been trying to get answers as to why it seems his order (and order number 10 placed by Liam the night before) have been cancelled by BT but are still showing as being in progress on the website.
Yet another order has been placed-will it be honoured?

Hi coig,
Thanks for your post and welcome to the forum!
I'm sorry that you're having problems migrating your services over to us. I'm happy to give you a hand from here and check what's causing the problem.
Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi, I purchased Acrobat Standard XI and received a mail thatthe order has been processed. Installation was fine, but I didn't receive the serial number.

Hi, I purchased Acrobat Standard XI and received a mail thatthe order has been processed. Installation was fine, but I didn't receive the serial number.

If you purchased a subscription, there is no serial number. Sign in with your Adobe ID to license the software.

Determine the number of times the document has been printed

Hi all,
I have a form here ( SAPSCRIPT), there is certain field to show how many times the document
has been printed, i use NAST-ANZAL, but it seems to display no correct value.
Am I using the riht field anyway? Or missing something?
Thanks ,,
AUD

Hi,
Check for the field NAST-VSTAT.
IF NAST-VSTAT = '1' meaning that document is printed.
Refer below example from NAST entries. 4000010000 document is printed 4 times.
OBJKY                          KSCHL SPRAS PARNR      PARVW USNAM        VSTAT
4000010000                     ZSGI E                      XXXXXXX                             1
4000010000                     ZSGI E                      XXXXXXX                             1
4000010000                     ZSGI E                      XXXXXXX                              1
4000010000                     ZSGI E                      XXXXXXX                             1
Rgds,
Arun

Recently ordered an unlocked iphone 4s on Nov. 24th. However, I have yet to receive a shipment notification email. Status of order has been on processing items for a week now. Anyone know how long it generally takes to receive shipment notification?

I recently ordered an unlocked iphone 4s from the apple store online on Nov. 24th. However, I have yet to receive a shipment notification email. The status of my order has been on processing items for a week now. Does anyone know how long it generally takes to receive shipment notification?

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

This user is allowed a maximum number of 5 concurrent shells, which has been exceeded.

I have a C# component which executes Powershell scripts in powershell environment. Suddenly it started to show some issues, Now, when I try to execute the following, it shows exception
Enter-PSSession -ComputerName 192.21.10.71 -Credential abc\admin
The exception is given below...
Enter-PSSession : Connecting to remote server failed with the following error message :
The WS-Management service cannot process the request. **This user is allowed a maximum
number of 5 concurrent shells, which has been exceeded.** Close existing shells or raise
the quota for this user. For more information, see the about_Remote_Troubleshooting
Help topic.
At line:1 char:16
+ Enter-PSSession <<<< -ComputerName 192.21.10.71 -Credential abc\admin
+ CategoryInfo : InvalidArgument: (192.21.10.71:String) [Enter-PSSession],
PSRemotingTransportException
+ FullyQualifiedErrorId : CreateRemoteRunspaceFailed
I fear, this is because I haven't properly closed / disposed the runspaces created in c# component.
Here is the code extracted from my component
Collection<PSObject> objPS = new Collection<PSObject>();
PowerShell powershell = PowerShell.Create();
PSCredential credential = new PSCredential(strUserName, password);
objRunspace = RunspaceFactory.CreateRunspace();
objRunspace.Open();
objPS = powershell.Invoke();
finally
objRunspace.Dispose();
I am beating the bush, instead of finding the root cause of this issue.
Thanks...

Hi,
Even I am facing the same issue while trying to open session in my C# code.
I have created and using one System.Management.Automation.Runspaces.Runspace object. Which is created by calling Open() method.
At the end while exiting the program I am calling Dispose() method.
Initially when I wrote this client, I was able to run powershell commands without any issue. After some days of use I got this below exception.
Result Message: Assembly Initialization method
InitializeLyncTestSuite threw exception. System.Management.Automation.Remoting.PSRemotingTransportException: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : The WS-Management
service cannot process the request. The maximum number of concurrent shells for this user has been exceeded. Close existing shells or raise the quota for this user. For more information, see the about_Remote_Troubleshooting Help topic.. Aborting test execution.
Result StackTrace:
at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal.Open()
at System.Management.Automation.Runspaces.RunspacePool.Open()
at System.Management.Automation.RemoteRunspace.Open()
After restarting all the Lync Server services I was able to avoid this exception. But after using this client couple of times now, I am facing the same issue again.
Does calling Dispose() method is not enough for closing a session from C# code? Or should I use something else to close session from C# client?

Order has been canceled because we were unable to verify your information.

I tried ordering a Macbook Air yesterday several times, but it keeps saying "your order has been canceled because we were unable to verify your information." I used some egiftcards for some of the balance and credit card for the rest. I tried several different credit cards but this keeps happening, and it doesn't work to go into the store because they said they couldn't take my egiftcards there. I called customer service and they had no idea. They said the relevant team will do "an investigation" and call me back when it's complete, but who knows how long that will take. I'm getting ready to go to China to give my cousin the laptop and I got the gift cards just for this purchase. So if I don't get this sorted out soon, I'm stuck with over $900 in gift cards I'll never use. Can someone please help?!

Good morning rachel87,
It is very kind of you to want to purchase a MacBook Air for your cousin in China, and it sounds like you may have purchase quite a bit in e-gift cards to do so. I can understand how disappointing and frustrating it may be not to be able to complete this purchase before you return. Given this information, I would like to let you know that purchases made with us are intended for use in the United States.
With that said, I was able to locate a couple of canceled orders using the email address you registered with the forum. I am going to reach out to our support teams to see if we can further research the issues behind your order cancelations. Once I have more information for you, I will be sure to reach out to you right away. In the meantime, your patience is greatly appreciated!
Sincerely,

How to find how many times a t code has been processed by a user

How to find how many times a t code has been processed by a user I am not able to get the exact number from the ST03 or STAD/STAT transaction. I am requiring the specific number that this T code has been processed completely this many no of times for a specific period.

You must be more precise with your question.
How long is the time period which you want to check, few hours or several days or longer? And how many executions do you expect, 100, 10000 or millions?
The STAD should help you, for the smaller numbers. There is no solution for the larger ones. Don't mix STAD and ST03, ST03 is aggregated STAD information
and know only how often a transaction was executed in total.
ST05 is no solution for your problem to much overhead, and yoou should trace only a short period.
There is no tool to check usage of transactions in more detail because of privacy reasons.
Siegfried

Order has been fully supplied and invoiced but a quantity of 76 is still sh

Hi,
Customer order XXXXXX line30This order has been fully supplied and invoiced but a quantity of 76 is still showing as outstanding on MD04
Total quantity is 288 out of which 212 was deliverd and invoiced once and 76 was delivered another time and invoiced the status is compleate for both
when you see in MD04 for same material it is showing 76 under Rec/Re coluem and it is showing purchse req under MRP colum, for rest of the line items it is showing Purchase order item under MRP coluem
user doest want this 76 in MD04
I have searched the note in SAP note no:Note 25444
SDRQCR21: Recovery of sales and delivery requirements
and run but no results. the problem is still there.
and also please guid me wether it is a sd issue are MM or any other because as to my analysis if i run SDRQCR21 it has to delete all bad requirments but this is with purchase requisistion under MRP colum in MD04 screen with a * mark.
please help me find a solution
Thanks for the help
Regards
Rajendra Prasad

Hi,
Try and click delivery completed in sale order and check MD04.
This will not appear.
regards
suresh

I can't sign into face time. My account has been verified and I have full wifi signal but it comes up with check network connection how to i fix this?

I can't sign into face time. My account has been verified and I have full wifi signal but it comes up with check network connection how to i fix this?

What IP does your iPad show as having?
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8. 8.8.4.4

HT3275 Time Machine Indexing Backup has been taking an extremely long time following a Single User launch. How can I fix this?

My MacBook Pro has not been launching properly and in addition has suddenly gone to a blue or white screen countless times. I am preparing to take it to the apple store but first I need to back it up as I have not done so since two weeks ago. In order to make it start properly, I launched the computer in Single User Mode, then ran time machine. It has been about 15 hours and time machine still says that it is indexing the backup. How can this be fixed? Surely it shouldn't take this long. Thanks in advance.

Hi jonathanfromjericho,
If you are having an extended index period during a Time Machine backup, you may find the following article helpful:
AirPort Time Capsule: Initial backup is interrupted
http://support.apple.com/kb/HT1176
Regards,
- Brenden

Length specified in network packet payload did not match number of bytes read; the connection has been closed.

Hello every one
I am getting this in my event log from time to time . not sure what is that ?
Is this a hacker trying to send rubbish data to SQL through the port ?
Any help is appreciated .
Length specified in network packet payload did not match number of bytes read; the connection has been closed. Please contact the vendor of the client library. [CLIENT: someip]

Thank you all for the reply ,
my server is on port 1533 . Port 1433 is closed on my server .
All the requests are coming from my own ip , i feel this is funny .
Is my server hacked then ?
Or could be my ISP doing any routine tests ?
Also is this is hack attempt , what does this hacker think he will benefit from this ? Could this bring the SQL server down ?
I was thinking about chaning port to something else , 1344 or something , u think this can be better ?

Number of times a service order has been printed

Similar Messages

Maybe you are looking for