Number of times main memory has been unloaded in last 24 hours "0"
Hello Experts,
I am getting error "BIA server is overloaded" in RSDDBIAMON2 tcode.
Description is below:
BIA server is overloaded
Message no. RSD_TREX154
Diagnosis
The SAP NetWeaver BI Accelerator server is overloaded. Either there has recently been a forced unload of the BIA main memory, ort he total volume of loaded data exceeds the limit of 50% of the available main memory.
Both these situations negatively impact the stability of the BIA server.
Procedure
You have two options:
Decrease the volume of data in the BIA: Delete BIA indexes that you do not currently need or that you do not urgently require.
Contact your BIA hardware partner and carry out a new sizing for the BIA hardware.
Procedure for System Administration
By default, this message only appears as a warning in processes that index large volumes of data in the BIA. You can use administration parameters to specify this warning as an error message as well. This causes all index processes to terminate if the error occurs.
To do this, execute program RSDDTREX_ADMIN_MAINTAIN with parameters Object= DONT_IGNORE_BIA_OVERLOAD, Value = X, and INSERT/UPDATE = X.
Diagnois says
1) The total volume of loaded data exceeds the limit of 50% of the available main memory,I have already checked the disk used for storing the indexes and it is not more than 50% of the BW Accelerator main memory.
2)There has recently been a forced unload of the BIA main memory: As per error details Number of times main memory has been unloaded in last 24 hours: '0' ie no unloaded had happened in last 24 hours.
Please help me how i can solve this erro as there is not unload happened and also disk usage under control.
Regards,
Akshay
hi,
1) You can check the traces via the trex standalone tool trexadmin or transaction TREXADMIN. You must provide more details to get an analyze. Was there running a lot of process chains at this time? Have you checked the memory monitoring of the BWA blades?
2) transaction TREXADMIN -> tab version..
You can try going through SAP notes which help with high memory issues.
Sometimes, the rfc server sometimes takes a lot of memory and doesn't free it afterwards.
Thanks,
Sheen
Similar Messages
-
I mainly just use my iTunes for organizing and adding new songs. Most of the time I listen to my music on my iPhone. I wish it would keep track of how many times I play a song in my music and transfer it to the computer under the 'number of times played' column. It would help out so much! Does anyone know if there is a way for the number of time a song has been played on your iPhone/iPod be transferred to the songs on your iTunes number of plays?
Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
Number of Times the table has been accessed
Hi,
How to find the number of the times the table has been accessed or read ?
Regards,You can do it with 9i
http://www.mpi-inf.mpg.de/departments/d5/teaching/ss05/is05/oracle/server.920/a96521/audit.htm
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
Determine the number of times the document has been printed
Hi all,
I have a form here ( SAPSCRIPT), there is certain field to show how many times the document
has been printed, i use NAST-ANZAL, but it seems to display no correct value.
Am I using the riht field anyway? Or missing something?
Thanks ,,
AUDHi,
Check for the field NAST-VSTAT.
IF NAST-VSTAT = '1' meaning that document is printed.
Refer below example from NAST entries. 4000010000 document is printed 4 times.
OBJKY KSCHL SPRAS PARNR PARVW USNAM VSTAT
4000010000 ZSGI E XXXXXXX 1
4000010000 ZSGI E XXXXXXX 1
4000010000 ZSGI E XXXXXXX 1
4000010000 ZSGI E XXXXXXX 1
Rgds,
Arun -
How Do I Assess The Number Of Times A Page Has Been Hit?
Can anyone identify the schema, table and field that when queried identify the number of times an individual page has been accessed?
I want to create a 'hit counter'. Ideally the field would identify all accesses, not by IP address or username or any other denominator.portal30.wwlog_activity_logs
Portal logs activity in two tables wwlog_activity_log1 and wwlog_activity_log2. It toggles between these two tables every week by default. The wwlog_activity_logs is a view connecting both of these tables.
Be prepared to do some homework to figure out how to identify the actual page(s) you want to log. It's not clear cut and also be aware that you can't get down to the actual tab pressed within a page without some custom coding... and also, portal purges logged data every two weeks by default. -
How do i count the number of times a cell has been referenced by other cells' formulae?
Hello,
I have a spreadsheet of recipes and ingredients that use checkboxes to let me know which recipes I can make based on the ingredients I have on-hand, using a formula like this one: =IF(AND('Spirits' :: A42,Mixers :: A18,Mixers :: A41,'Spirits' :: A25 ),Table 3 :: $A$2,Table 3 :: $A$3). If I've checked all of the boxes for ingredients that are required for any one of my recipes, the cell that the formula is in returns something like "YES"; otherwise, it returns a blank. It works well enough, but I'd like to include a cell next to each ingredient with a formula that will look through the hundreds of recipes, which all use a formula like the one above, and return a count of the number of times the ingredient's cell is referenced in those formulas. That way, I'll know which ingredients are the most commonly used in my eclectic collection of recipes. I thought something like =COUNTIF('Recipes' :: A2:A343, "=A2") would work, but it doesn't look at the cell references in the formulas, so no, it doesn't work. Any ideas? I'm using Numbers 2.3Hello
There's no formula to inspect other formula in Numbers. So what you asked cannot be achived in such a way you described.
A simple alternative method would be to build recipe-ingredient matrix as follows.
E.g.
Table definitions:
Recipes
A1 Recipe \ Ingredient
A2 A
A3 B
A4 C
A5 D
A6 E
A7 F
A8 # recipes / ingredient
B1 X1
B2 TRUE
B3 FALSE
B4 TRUE
B5 FALSE
B6 TRUE
B7 FALSE
B8 =COUNTIF(B,TRUE)
C1 X2
C2 TRUE
C3 TRUE
C4 FALSE
C5 TRUE
C6 TRUE
C7 TRUE
C8 =COUNTIF(C,TRUE)
D1 X3
D2 FALSE
D3 TRUE
D4 FALSE
D5 TRUE
D6 FALSE
D7 TRUE
D8 =COUNTIF(D,TRUE)
E1 X4
E2 FALSE
E3 FALSE
E4 FALSE
E5 FALSE
E6 FALSE
E7 TRUE
E8 =COUNTIF(E,TRUE)
F1 Y1
F2 TRUE
F3 FALSE
F4 TRUE
F5 TRUE
F6 TRUE
F7 FALSE
F8 =COUNTIF(F,TRUE)
G1 Y2
G2 FALSE
G3 TRUE
G4 TRUE
G5 FALSE
G6 FALSE
G7 TRUE
G8 =COUNTIF(G,TRUE)
H1 Y3
H2 TRUE
H3 TRUE
H4 FALSE
H5 TRUE
H6 TRUE
H7 FALSE
H8 =COUNTIF(H,TRUE)
I1 Y4
I2 FALSE
I3 FALSE
I4 FALSE
I5 FALSE
I6 FALSE
I7 TRUE
I8 =COUNTIF(I,TRUE)
J1 in-stock?
J2 =SUMIF(B2:E2,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F2:I2,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B2:I2,TRUE)
J3 =SUMIF(B3:E3,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F3:I3,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B3:I3,TRUE)
J4 =SUMIF(B4:E4,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F4:I4,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B4:I4,TRUE)
J5 =SUMIF(B5:E5,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F5:I5,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B5:I5,TRUE)
J6 =SUMIF(B6:E6,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F6:I6,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B6:I6,TRUE)
J7 =SUMIF(B7:E7,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F7:I7,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B7:I7,TRUE)
J8
X
A1 Ingredient
A2 X1
A3 X2
A4 X3
A5 X4
B1 in-stock?
B2 TRUE
B3 TRUE
B4 TRUE
B5 FALSE
C1 code
C2 =IF(B2,1,0)
C3 =IF(B3,1,0)
C4 =IF(B4,1,0)
C5 =IF(B5,1,0)
Y
A1 Ingredient
A2 Y1
A3 Y2
A4 Y3
A5 Y4
B1 in-stock?
B2 TRUE
B3 FALSE
B4 TRUE
B5 FALSE
C1 code
C2 =IF(B2,1,0)
C3 =IF(B3,1,0)
C4 =IF(B4,1,0)
C5 =IF(B5,1,0)
In "Recipe" table, the first row is header row and the last row is footer row.
Hope this may help,
H -
Causes for main memory to be unloaded - BIA Server is overloaded
The check on our BIA server is showing "BIA Server is overloaded".
The details indicate that the main memory was unloaded >900 times in the last 24 hours.
I am not aware of any special activities taking place - what would be the cause of the main memory being unloaded so frequently?
The indices only take up 25% of main memory, which is well below the 50% threshold recommended by SAP.
What else might be the cause?
ThanksHi Experts,
We are also getting the same Alert / Error in the SAP Net weaver BIA Monitor and we are not able to understand, how to go ahead with the same.
1. The alert we're getting is "BIA server is overloaded". If we click on details it's showing the alert message as "Number of Times Main Memory Was Unloaded in Last 24 Hours: '1064'".
2. We even tried doing a BIA Reorg and Restart activity, but in vain.
Note: I. Before we did the BIA Reorg, the details message was showing as "Number of Times Main Memory Was Unloaded in Last 24 Hours: '2184'".
II. We did a recent SP 22 upgrade and I'm not sure on where to check for the BIA revision?
Any suggestions on this would be really helpful?
Thank You,
Karthik.Ch -
How many times a program has been run?
Is there a transaction or table or something that tracks how many times a program has been run? The number of times the program has been run plus using the programs' attributes for last changed would help me a lot. We need this for an archiving study to determine of the client has set up the configuration correctly since they went live and have been executing the correct programs. Thanks and mucho rewards if someone has an answer. FYI - I have done a forum search and could find nothing on this topic. I have looked at the tables TADIR and no help, as well as transaction STAT.
I know ST03N transaction can be used extensively to determine how the programs were executed or even to know who all are using a particular transaction...
I tried to find if we can find the number of executions of a program through this transaction, I could not find myself...
try if you can find it through this tcode.
Phani -
No Of times a workbook has been run
How to get the statistics on Number of times a workbook has been run.
Thanks
Vinoth.Hello Vinoth
Take a look at the table called EUl5_QPP_STATS. Providing the gathering of statistics has not been disabled (most administrators do not know how to do this) you can query this table.
Here's some scripts that look back over a period of 18 months:
SELECT
QPP.QS_DOC_OWNER WORKBOOK_OWNER,
QPP.QS_DOC_NAME WORKBOOK_NAME,
QPP.QS_DOC_DETAILS WORKSHEET_NAME,
QPP.QS_CREATED_BY RUN_BY,
TRUNC(MAX(QPP.QS_CREATED_DATE)) LAST_USED_DATE,
COUNT(QPP.QS_ID) TIMES_USED
FROM
EUL5_QPP_STATS QPP
WHERE
QPP.QS_CREATED_DATE >= ADD_MONTHS(SYSDATE, -18)
GROUP BY
QPP.QS_DOC_OWNER,
QPP.QS_DOC_NAME,
QPP.QS_CREATED_BY,
QPP.QS_DOC_DETAILS
ORDER BY 1,2,3;
If you have set up a naming standard with your company, you can usually ignore any Workbook Name that begins with Workbook. These are the ad-hoc workbooks created on a one-off basis. To exclude these you can amend the query as follows:
SELECT
QPP.QS_DOC_OWNER WORKBOOK_OWNER,
QPP.QS_DOC_NAME WORKBOOK_NAME,
QPP.QS_DOC_DETAILS WORKSHEET_NAME,
QPP.QS_CREATED_BY RUN_BY,
TRUNC(MAX(QPP.QS_CREATED_DATE)) LAST_USED_DATE,
COUNT(QPP.QS_ID) TIMES_USED
FROM
EUL5_QPP_STATS QPP
WHERE
QPP.QS_CREATED_DATE >= ADD_MONTHS(SYSDATE, -12)
AND QPP.QS_DOC_NAME NOT LIKE 'Workbook%'
GROUP BY
QPP.QS_DOC_OWNER,
QPP.QS_DOC_NAME,
QPP.QS_CREATED_BY,
QPP.QS_DOC_DETAILS
ORDER BY 1,2,3;
Note how in the above query I switched it to only query 12 months.
You can also further amend the query to join it back to EUL5_DOCUMENTS to only report workbooks that currently exist as a saved workbook. Here is that query:
SELECT
QPP.QS_DOC_OWNER WORKBOOK_OWNER,
QPP.QS_DOC_NAME WORKBOOK_NAME,
QPP.QS_DOC_DETAILS WORKSHEET_NAME,
QPP.QS_CREATED_BY RUN_BY,
TRUNC(MAX(QPP.QS_CREATED_DATE)) LAST_USED_DATE,
COUNT(QPP.QS_ID) TIMES_USED
FROM
EUL5_QPP_STATS QPP,
EUL5_DOCUMENTS DOC
WHERE
QPP.QS_CREATED_DATE >= ADD_MONTHS(SYSDATE, -12)
AND QPP.QS_DOC_NAME NOT LIKE 'Workbook%'
AND DOC.DOC_NAME = QPP.QS_DOC_NAME
GROUP BY
QPP.QS_DOC_OWNER,
QPP.QS_DOC_NAME,
QPP.QS_CREATED_BY,
QPP.QS_DOC_DETAILS
ORDER BY 1,2,3;
Hope this helps
Michael -
Hi all,
I am writing a VI for measuring data and inserting it into a database. The measurements are controlled by a loop that runs once every minute. I want to give each measurement a unique id number and store this too in the database.
To do this, I want to add a counter to this loop so that I can count the number of times the loop has executed in total. This is, even if the VI, LabVIEW or even th PC is restarted, I want the counter to keep track of the number of executions. If say, the loope executes two times and then the VI is stopped and restarted, I want the following number on the counter to be three.
Does anyone have an idea about how to do this? I am gratefule for any help!
Clara
Message Edited by Clara G on 05-11-2010 08:21 AM
Solved!
Go to Solution.Not allowed to give away code but I can describe one of my "Totalizers" used to keep track of how much stuff has passed through a fliter so we know when to change it.
THe Total izer is implemented as an Action Engine.
It has three actions (methods)
1) Init - Opens an ini file and reads the last values read and cahces these in shift registers. It also inits a timer so we now how long since the last file I/O.
2) Update - Uses the data passed by the caller to update the totals. It also checks how long since the last save and if more than one minute it writes to the ini file (forced write).
3) Read - returns the totals for display and evealuating if a an alarm should be triggered to change the filter.
Note:
THe pre-LV 8.6 version of the ini file exposed methods to allow writing to the file. The new ini functions do not expose that functionality and require closing the file.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? I need to persuade someone that this really is worthwhile. Mr Ignorant.
The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ... -
Finding query access frequency or how many times a query has been executed?
Dear Experts
I need to find the total number of access frequency of individual queries that are requested by the users say at a particular time.
Say there are 20 distinct queries requested in the time difference of 3 hours. All of the 20 queries or some of the queries may be requested for more than 2/3 times at that time by other users. By the way say query Q1 is requested 5 times at that so its query access frequency or how many times this query is executed is 5.
From where and how can I can find this counting of query access frequency or how many times a query has been executed at particular time or a session?
Normally we know the there SQL history dynamic performance views or if it can be possible to query the Shared pool library cache for SQL area it may be possible to find the total number of execution time for a query. But how to find that if anyone knows, please help me about this.
Regards-
Engr. A.N.M. Bazlur Rashid
OCP DBAThat's one of the stats reported by statspack - assuming that your query does sufficient work to meet the thresholds for the standard report. Executions is of course one of the columns of v$sql so you might just wish to sample that yourself. Finally if you are on 11g and the sql you are interested is relatively low resource intensive and you are licensed for AWR then you can use the slightly madly named "colored sql" feature that ensures that a specific statement will always be sampled for AWR.
Niall Litchfield
http://www.orawin.info/ -
Hi,
I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
Does anybody have any idea what the reason behind this could be.
- First time with iPhone and frustrated.
BrijuIf you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
How to get the times a document has been opened
Does somebody know if exists any kind of property attached to documents that can tell who many times a document has been opened? Or there is a way to know this in a different way?
Thank you in advanced.Hi Pablo,
To obtain such statistical information wecan implement KM apis.. in the sense create repository services That can count the actual number of times a document is accessed
see this link for repository services
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to develop with the repository framework apis.pdf
Also refer to the following forum Looking for way to count a specific document hits(Not with Activity Report) for further assistance.
Hope this helps,
Regards,
Uma. -
I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.
Maybe you are looking for
-
Why my Iphone 4S battery dead quicker than others!
Hello guys: At the start i have to say i am a Janpanese guy which means what i say may have some mistacks. Please dont pick on me. I bought an iphone 4s 4 days ago. I find out my phone only need charge 3 hours at the first time and was up to 100 per
-
Exported slideshow slightly different
When I play a slideshow with music in iPhoto, the slides and music are synced just like I want them. When I export it as a quicktime movie to iDVD, however, that changes slightly as if the slides are running by faster. Is this just a glitch that I ha
-
HT1338 my mini mac my mini mc screen keeps flipping what can i do to prevent it.
My mini mac screen keeps flipping , what can I do to correct the situation?
-
Our admin username "portal" password expired, and we need to change the expiration date in our Oracle Directory Manager/Oracle Internet Directory (OID). We are familiar with accessing OID in a Windows environment, but not sure how to do so in a Linux
-
How common an App is Skype on the IPhone?
I am researching remote viewing via Skype on an IPhone. I had a comment it was not a common app. I thought Skype was compatible with all smart phones? If you needed to do remote viewing, would one choice be Skype for Apple and Non-apple users? Can an