Number of unread message is in negative when all message are read

Hi, in my list of text message of my iphone, when I have all the message read, the number of unread message is in negative!
Thank you for your solutions!!

have you taken the basic troubleshooting steps outlined in the User Guide?  What exactly HAVE you done to try and solve your problem?

Similar Messages

  • Black only error message when all inks are full

    My printer ran out of a color some time ago and popped up the black only message box. I have since replaced all of the colored inks and it still gives me the black only message when I go to print and says I need to replace magenta. I just replaced it! My printer is the photosmart C6280. Thank you

    Hello Sudharshan,
    "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
    This is error is indicating that your original CAD model is not checked in and as per your configuration you require the original to be checked in before moving to next status.
    Please:
    1. Check your document status network.
    2. ensure that you have proper set up for the fields "check in" in the current status. This indicator should be set. This ensures that the document is automatically checked in before moving to the next status. This will solve your problem.
    When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
    Because of the above set up missing the original DIR is missing the original document and hence the system assumes you are creating a new DIR when you click on the object in CAD view.
    regards,
    N K

  • Message no. 26269 : Status can only be set when all originals are stored

    Hi,
    While changing status in cv02n, i am getting the below message no-Message no. 26269 : Status can only be set when all originals are stored. I am not getting the message solution in google. please guide me how to come over from this message.
    Regards,
    Mastan.

    Collegues! Have you any idea?
    Found this - [recommendation|http://help.sap.com/saphelp_47x200/helpdata/en/0c/b98e3c90347b17e10000000a114084/content.htm] - how to, but there so simple scenario without details about standart functionality.
    Check In
    You can check in originals, which are saved in the local network, into a storage system. The following originals are indicated by the  icon:
    Originals that are to be checked in for the first time.
    Originals that have already been checked in, and loaded into the local network for changing.
    To do this start WebDocuments. Process the document info record in the change mode.
    Select the original in the Originals dataset.
    Choose Check In. The system determines the storage system based on the system settings, and checks in the original.
    You return to the data sheet. The original application file is indicated by the Checked In  icon.
    Save the document.
    Very simple, but not work, and no details. Castle icon are not locked. DELETE, CANCEL - work, but not CNANGE.
    Maybe my storage system cannot determine the storage system? If it is right, so where can i maintain this option?

  • Can we change log_buffer parameter online e.g. when all users are working..

    Hi,
    Can we change log_buffer parameter online e.g. when all users are working.. ???
    What is relation between redo buffer in sga and log_buffer parameter ?
    SQL> show sga
    Total System Global Area 3758096384 bytes
    Fixed Size 1983152 bytes
    Variable Size 553655632 bytes
    Database Buffers 3187671040 bytes
    Redo Buffers 14786560 bytes
    SQL>
    SQL> show parameter log_buffer
    NAME TYPE VALUE
    log_buffer integer 14338048
    SQL>
    SQL>
    If the log_buffer parameter is 14 MB then why redo buffer is no as same size e.g.
    14 MB
    SSM

    I am hoping your Oracle Consultant know what he's talking about.
    According to Oracle Performance Guide,
    http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/memory.htm#sthref654
    "On most systems, sizing the log buffer larger than 1M does not provide any performance benefit. Increasing the log buffer size does not have any negative implications on performance or recoverability. It merely uses extra memory.
    The best method to determine if bigger redo buffer is needed is
    SELECT NAME, VALUE
    FROM V$SYSSTAT
    WHERE NAME = 'redo buffer allocation retries';
    The value of redo buffer allocation retries should be near zero over an interval. If this value increments consistently, then processes have had to wait for space in the redo log buffer. The wait can be caused by the log buffer being too small or by checkpointing. Increase the size of the redo log buffer, if necessary, by changing the value of the initialization parameter LOG_BUFFER. The value of this parameter is expressed in bytes. Alternatively, improve the checkpointing or archiving process.
    Other than that, hight log file sync event indicate you need faster disk for your redo logfiles. However, please also post your commits per second and redo per second from your AWR report.
    100M redo logs might be small for your environment.

  • Number of connection to this computer limited and all connections are in use right now

    I have Lenovo ThinkPad T520 (i7, NVIDIA 4200TM) with dock station and two monitors. Sometimes when I close notebook and undock it from dock station. Then I cannot login to my notebook because of error "Number of connection to this computer limited and
    all connections are in use right now". This is screenshot of my laptop  http://i.imgur.com/6MXnQKf.jpg
    Laptop is not in domain and does not have remote desktop connections. It was just turned in sleep mode and late turned on. 
    This happen pretty often one from 10..20 times of undock.  It did not happen with Windows 7 before. 

    The network does not work properly after you resume the computer. This kind of issues are cuased by the network device driver. Download the latess Windows 8 driver from Lenovo website and install it.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    Press the escape (esc) key to exit full-screen mode.

  • CAD VIEW Error : "Status can only be set when all originals are stored"

    Hi Friends,
    I have Proe to SAP integrated and when I open Proe model in CAD VIEW and try to create a document it shows an error "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
    When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this  ?
    Rgds,
    SM

    Hello Sudharshan,
    "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
    This is error is indicating that your original CAD model is not checked in and as per your configuration you require the original to be checked in before moving to next status.
    Please:
    1. Check your document status network.
    2. ensure that you have proper set up for the fields "check in" in the current status. This indicator should be set. This ensures that the document is automatically checked in before moving to the next status. This will solve your problem.
    When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
    Because of the above set up missing the original DIR is missing the original document and hence the system assumes you are creating a new DIR when you click on the object in CAD view.
    regards,
    N K

  • Callback function may be NULL only when database handles are read-only

    Hi,
    I am getting some errors when trying to run my java code that will try to open a few cursors and join them to fetch the data.
    ath .:/usr/src/db-4.7.25.NC/java/src:/usr/local/BerkeleyDB.4.7/lib/db.jar bdbtest
    MyDbs: Callback function may be NULL only when database handles are read-only
    Error on inventory secondary cursor:
    java.lang.IllegalArgumentException: Invalid argument: Callback function may be NULL only when database handles are read-only
    What does that error mean? How can I resolve it? I am following the sample program and I can't find anything related.
    Here is my code.
    import com.sleepycat.db.DatabaseException;
    import com.sleepycat.db.Database;
    import com.sleepycat.db.SecondaryDatabase;
    import com.sleepycat.db.DatabaseConfig;
    import com.sleepycat.db.DatabaseType;
    import java.io.FileNotFoundException;
    import com.sleepycat.db.DatabaseEntry;
    import com.sleepycat.db.SecondaryCursor;
    import com.sleepycat.db.Cursor;
    import com.sleepycat.db.DatabaseException;
    import com.sleepycat.db.LockMode;
    import com.sleepycat.db.OperationStatus;
    import com.sleepycat.db.SecondaryCursor;
    import com.sleepycat.db.SecondaryConfig;
    import com.sleepycat.bind.EntryBinding;
    import com.sleepycat.bind.serial.SerialBinding;
    import com.sleepycat.bind.tuple.TupleBinding;
    import com.sleepycat.db.Cursor;
    import com.sleepycat.db.DatabaseEntry;
    import com.sleepycat.db.DatabaseException;
    import com.sleepycat.db.LockMode;
    import com.sleepycat.db.OperationStatus;
    import com.sleepycat.db.SecondaryCursor;
    public class bdbtest {
    public static void main(String args[]) {
    SecondaryDatabase myDatabase = null;
         Database primDB = null;
         Cursor cursor = null;
    try {
    // Open the database. Create it if it does not already exist.
    DatabaseConfig dbConfig = new DatabaseConfig();
         dbConfig.setErrorStream(System.err);
    dbConfig.setErrorPrefix("MyDbs");
         dbConfig.setType(DatabaseType.BTREE);
    dbConfig.setAllowCreate(true);
         SecondaryConfig mySecConfig = new SecondaryConfig();
         mySecConfig.setErrorStream(System.err);
    mySecConfig.setErrorPrefix("MyDbs");
         mySecConfig.setType(DatabaseType.BTREE);
    mySecConfig.setAllowCreate(true);
         primDB = new Database("/tmp/bdb_ca_db.db",
    "bdb_ca_db",
    dbConfig);
    dbConfig.setAllowCreate(true);
    myDatabase = new SecondaryDatabase("/tmp/bdb_ca_sdb.db",
    "ca_sdb_res_alias",
    primDB,
    mySecConfig);
         String res ="in-1";
         SecondaryCursor secCursor = null;
         DatabaseEntry searchKey =
    new DatabaseEntry(res.getBytes("UTF-8"));
         DatabaseEntry foundKey = new DatabaseEntry();
    DatabaseEntry foundData = new DatabaseEntry();
         secCursor =
    myDatabase.openSecondaryCursor(null, config);
    // Search for the secondary database entry.
    OperationStatus retVal =
    secCursor.getSearchKey(searchKey, foundKey,
    foundData, LockMode.DEFAULT);
         if (retVal == OperationStatus.SUCCESS){
              System.out.println("succ");
         }else {
              System.out.println("fail");
    while (retVal == OperationStatus.SUCCESS) {
    String keyString = new String(foundKey.getData(), "UTF-8");
    String dataString = new String(foundData.getData(), "UTF-8");
    System.out.println("Key | Data : " + keyString + " | " +
    dataString + "");
    secCursor.getNextDup(searchKey, foundKey,foundData, LockMode.DEFAULT);
         } catch (Exception e) {
    System.err.println("Error on inventory secondary cursor:");
    System.err.println(e.toString());
    e.printStackTrace();
         finally {
    // Make sure to close the cursor
              try {
              cursor.close();
              }catch (com.sleepycat.db.DatabaseException e) {
    System.out.println("All done.");
    }

    Hi,
    The error is because either the primary database or the secondary database is configured as read only and the callback to create the secondary keys is null. A quick glance of the code, it appears as if you did not set up the secondary database correctly. In the Getting Started Guide for JAVA API chap 10, we have detailed information on what needs to be done as well as a code example. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/gsg/JAVA/index.html and look for Chap 10.
    regards,
    Mike Brey, Oracle Berkeley DB

  • Still print picking list when ALL items are blocked. Is this possible.

    You know what warehouse people are like. When a delivery has all items blocked the picking list isn't printed, and the warehouse guys are wondering why nothing has printed. Of course a list is printed when there is at least one item that is not blocked on a picking list.
    My question is whether it's possible to print the picking list when all items are blocked?. I would expect no items to be printed for picking, but at the bottom of the report I would expect to see a list of items blocked.
    Anyone?.
    Jason

    HI
    1.Kindly chekc the routine in the t code V/27
    2.Against the routine against rthe condition type in the be.lwo path
          Logistics Execution
              Shipping
                 Output Control
                      Output Determination
                         Maintain Output Determination for Outbound Deliveries
                                Maintain Output Determination Procedure
    3.if it is in warehouse management then check in the tocde OMLV
    REgards
    Damu

  • Unread Message when all messages have been read

    My 8830 has an unread message icon but all messages have been read.  I have even searched for an unread message.  Any ideas?  It is driving me crazy.
    Solved!
    Go to Solution.

    Thank you so much!!  It worked!!!

  • Error message to be thrown when multiple enteries are not entered

    Hello Guys,
    I have used a select-options with no intervals in the selection screen.
    If the user enters one value in the range, its working.
    But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
    I used low and high but its not working.
    Kindly guide me.

    No intervals only works on the main screen.  If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic.  If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
    Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
    Something like this:
    Select <your field> from <your table> into table <your internal table>
    where <your field> IN <your select-options>.
      if lines( <your internal table> ) lt 2.
        <your error message>.
    endif.

  • Test message from RWB: Error when sending message: 401 Unauthorized

    Hi Experts,
    While I am sending test message from RWB, I am getting following error:
    Error when sending message: 401 Unauthorized
    I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
    I am having SAP_ALL authorizations and few days back everything was fine.
    I think something wrong with configuration in XI but I am unable to pin point.
    Please help.
    Regards,
    Gourav

    Yes,
    but
    Role of Business System : Integration system
    Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
    How can I change it to Application system
    and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
    Regards,
    Gourav

  • Number that is a multiple of 9 and all digits are even?

    I've writen this short program to find a number that is a multiple of 9 yet all its digits are even. Here is the code. I'm sure its not very compact and am doing this the hard way.
    public class alldigitseven
        public static void main(String[] args)
            int number = 0;
            String numberString, tempString;
            char tempChar;
            int tempInt, matches = 0, stringLength;
            double tempRemainder;
            boolean answer = false;
            while (answer != true)
                // add 9 to the number
                if (number < 1000000)
                    number += 9;
                // convert the int to a string
                numberString = "" + number;
                stringLength = numberString.length();
                for (int i = 0; i <= stringLength; i++)
                    tempChar = numberString.charAt(i);
                    tempString = "" + tempChar;
                    tempInt = Integer.parseInt(tempString);
                    tempRemainder = tempInt%2;
                    if (tempRemainder == 0)
                        matches++;
                    if (matches == stringLength - 1)
                        System.out.println (numberString);
                        answer = true;
    }anways the code complies fine however when I run it, I get the error
    "StringIndexOutOfBoundsException:
    String index out of range: 1 (in Java.lang.String)"
    What do I need to do to fix this?

    here was the final code if anyone was curious...
    public class alldigitseven
        public static void main(String[] args)
            int number = 0;
            String numberString, tempString;
            char tempChar;
            int tempInt, matches = 0, stringLength;
            int tempRemainder;
            boolean answer = false;
            while (answer != true)
                // reset matches
                matches = 0;
                // add 9 to the number
                if (number < 1000)
                    number += 9;
                else
                    answer = true;
                // convert the int to a string
                numberString = "" + number;
                stringLength = numberString.length();
                for (int i = 0; i < stringLength; i++)
                    tempChar = numberString.charAt(i);
                    tempString = "" + tempChar;
                    tempInt = Integer.parseInt(tempString);
                    tempRemainder = tempInt%2;
                    if (tempRemainder == 0)
                        matches++;
                    if (matches == stringLength)
                        System.out.println (numberString);
            answer = true;
    }

  • Scripting for when all buttons are clicked

    Im quite new to flash well at least the scripting part of it.
    I'm much more of a designer and I'm having big problems I know that
    it is prob very simple but I am totally useless at it! Can some1
    please just point me in the right direction thank you xxx

    If you're testing in flash you should see some trace outputs
    in the output panel. If you don't then there's something not
    working right.
    When you press each of your buttons, you want the main
    timeline to go to a different frame right? You need to set those
    frame targets in the code.
    example for but_bat:
    {button:but_bat, gotoFrame:2},
    this sets things up so that when but_bat is pressed, the
    timeline goes to frame 2.
    You will need to set the others for their correct frame
    targets. Just change the numbers for gotoFrame:
    number here
    Is what you want to happen when
    all of the buttons have been clicked that a congratulations
    sign movieclip is played? (You haven't said what you wanted it to
    do at that point, so I'm afraid I couldn't know that ;-) ) At the
    moment I've set the script up so that it checks... but all it does
    is trace an output:'I would normally want to do something special
    from this point' where whatever you want to have happen when
    they're all pressed would be requested by actionscript. If you tell
    me what that is, I can tell you the code to do it.

  • Order Output should be supressed when all items are rejected

    We have a requirement, where when all schedule lines in a sales order are rejected the order confirmation output should be suppressed.
    This is what we did to achieve it.
    Using the customer modification structure KOMKBZ3, add a new field ZZ_ALL_SL_REJ . This field is an indicator that will be set if all all items in a sales order are rejected.
    Call function KOMKBV1_FILL to populate the communication structure KOMKBV1. The function calls USEREXIT_KOMKBV1_FILL, which is the header level user exit routine.
    In this user exit, through a select statement read table J_3AVBUE, and check for all schedule lines if 'ABSTA' equals C, if this is true the ZZ_ALL_SL_REJ  indicator is set to ‘X’.
    Then in the output requirement routine 900, see if KOMKBV1-ZZ_ALL_SL_REJ is set to 'X', if so set the return code to be 4.
    However when we reject items in sales order and save it, we have to go back in again and save it for the second time for the output determination to be carried out again.
    Could someone help with this...
    Thanks.
    Anne

    I believe an easier method would be to check KOMKBV1-ABSTK in the output requirement. If it's 'C', then all items have been rejected.
    Cheers, Paul.

Maybe you are looking for