. " number of virtual circuits" what it means  ?

Hi,
Here is the excert from the manual.
"The CIRCUITS parameter sets a maximum limit on the number of virtual circuits that can be created in shared memory."
. " number of virtual circuits" what it means ?
thanks
siva

virtual circuitsConnections (sessions) to database through dispatchers and server processes.

Similar Messages

  • What does the event "virtual circuit wait" mean?

    Hi all !
    Can anyone tell me about this event? Yesterday I checked my ASH table and found that most of the time database spends on are 2 "non-idle" events: "db file sequential read" and "virtual circuit wait". I did not find any information about the second event on Metalink or in Documentation. Do i need to pay my attention to this event? DB is 11g on HP-UX.
    Thanks in advance!

    The Oracle Reference has descriptions of wait events:
    [Virtual Circuit Wait|http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/waitevents003.htm#BABBCJEF]
    The session waits for a virtual circuit operation to complete.Wait Time: 30 seconds
    Parameter      Description
    circuit#      Indicates the virtual circuit# being waited on
    type      Indicates the type of operation the session is waiting for

  • I received a second iPad Air as a gift and sold on Ebay.  The person who bought it asked if is a Oem pad.  Not sure what that means.  The model part number is PF004LL/A

    I received a second iPad Air as a gift and sold on Ebay.  The person who bought it asked if is a Oem pad.  Not sure what that means.  The model part number is PF004LL/A.

    You can see the model number in Settings>General>About>Model. The model number has a two-letter code, a number and some more letters. The last part stands for the country/region. The first letter can be "F" (refurbished), "M" (normal retail), or "P" (personalized / engraved). For example MC605B is the model MC605 and B is for the region.
    What country does my device belong to?
    http://www.jbfaq.com/article.asp?id=63
     Cheers, Tom

  • What is mean serial number

    How can I  knew the model of iphone 5s free sim card can work on carrier in middle east ?

    sunshinecowgill wrote:
    We have three operational computers, one does not have iTunes on it.  Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers.  See what I mean?  I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. 
    You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized.

  • Sessions number....what does it mean

    Hi all
    Today my BT Infinity died, after talking to BT help, it corrected itself and all is well.
    However, I fired up the Hub Manager out of interest and I have an error message "No more than 100 sessions at a time are allowed. Please wait until open sessions expire". This message appears on all of the four options. I asked the BT (India) person if they could tell me what this means.....they could not.
    Can anybody explain what this message means and how I get shot of it.
    Many thanks

    Hi Ronson and welcome
    Not sure why this happens - possibly the hub locking up, but you should find that if you unplug the hub for about 30 seconds, plug it back in and allow all the lights to go blue, then you should now be able to access the hub manager.
    -+-No longer a forum member-+-

  • I keep getting this message:DEBUG flag to true in config.php when I try to copy/paste to Pages on my iMac or upload a picture to a website chat forum. I don't know what it means or how to correct it. I am running an iMac desktop with Lion 10.7.3 with 2 GB

    I keep getting this message the past week when I try to copy/paste text to Pages or upload a picture to a website chat forum. I don't know what it means, or how to correct it. I'm running a 2009 iMac desktop with OSX Lion 10.7.3  with 2 GB  Any help appreciated.
    Angie

    Running the Lion Os requires a MINIMUM of 2 GB of RAM, as you have.  However, with that little RAM the computer will have trouble with many memory based tasks, such as copying and pasting.  You really need to increase the amount of RAM your computer has in order to increase its speed and performance.  Now, when a task requires more RAM than your system has available then the OS will use some harddrive space temporarily instead.  This is called "Virtual Memory."  Is it possible that at this time that your harddrive is very full relative to its stated capacity, so that even "virtual memory" is not really available?  If that is the case, you really need to cleanup your harddrive by deleting a fair number of less used files.
    Hope this helps

  • How much Number of virtual processors for VMs

    Hi,
    there is lots more information about logical processors, cores and CPU and their definitions, on the internet. also here in this forum.
    In order to make sure i am not lost on internet, it is better to take experts advice like you.
    I have simple question read on:
    I have a Hyper-v cluster host with 4 sockets (4 CPU's) with 6 cores each. so total are 24 cores.
    I can see in hyper-v host Logical processors are 48. (which may be 1 proc = 12 logical processors, so 4 proc x 12 = 48 logical processors)
    now how much virtual processors I can assign to each VM. I know I can assign more logical processor depending on application requirement. and it affects application performance. For each VM, it is showing maximum i can select 48 virtual
    processors.
    is it true I can select any number of virtual processors in each VM? is there any limitation?
    is it that if i have 8 VMs if i set virtual processors to 6 then it will occupy all logical processors (48 in my case) and i  will not be able to allocate logical processor to new VMs?
    is it that if i have 10 VMs and all set to 10 virtual processors? 
    thank you

    Quite honestly - this math really does not matter that much with modern processors. (a combination of speed and core count, and advances in CPU scheduling in the hypervisor)
    You have to have a VM with many vCPU to get into any point of contention. 
    In practice, It is very difficult to over-subscribe your CPU resources without hitting some other bottleneck first.
    Set the vCPU count where it is appropriate for your workload.  That means testing your workload to see where adding additional vCPU to a VM provides no benefit in throughput or speed or capacity for your application.
    A select few applications are written in a way that there is a linear correlation between CPU count and throughput.
    There is an old point about not assigning so many vCPU to a VM that the VM could end up with more than one execution thread on the same processor (core).
    You have 24 cores.  and each has 12 logical processors (execution threads).  So, with zero CPU over-subscription you could have 288 vCPU assigned to any number of VMs.  To expand my point in the previous paragraph - you can easily / safely go
    over this count of 288 - what I am referring to above is an old guideline that would guide you to not assigning more than 288 vCPU to a single VM - ensuring that no single execution thread is trying to service more than one vCPU of the same VM.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • What is mean by index range scan and fast full scan

    What is mean by the following execution plans
    1)Table access by index rowid
    2) Index range scan
    3) Index fast full scan
    4) global index by rowid
    ..etc
    where i can get this information.In what situation CBO take these paths.Can you pls give me a link where i can find all these.I read these long time ago but not able to recollect
    Thanks
    Anand

    Oracle® Database Performance Tuning Guide
    10g Release 2 (10.2)
    Part Number B14211-01
    13.5 Understanding Access Paths for the Query Optimizer
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14211/optimops.htm#sthref1281

  • My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

    My imac is doing strange things:
    -delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
    -it gets stuck between things, the rainbow wheel appears and its just delays there forever....
    -and every now and then the mouse starts flickering and bouncing wildly onscreen.
    I ran the appel hardware test and it detected an error:
    4MOT/4/40000003:HDD-1233
    Does anybody know what that means? HELP!

    WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
    RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
    Hope you get it taken care of!

  • TS1717 My itunes won't open and I get message that says "The file iTunes library.itl cannot be read because it was created by a newer version of itunes." I am unsure what this means, but I have uninstalled and reinstalled the itunes, and it still will not

    I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means.  I have Windows 7 on my computer and was able access itunes until just recently.  I have tried uninstalling and reinstalling itunes multiple times and that does not work.  Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.

    That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • While saving PO the error in message is &5&6&7&8? What it means?

    Hi All,
    While saving PO the error in message is &5&6&7&8? What it means?
    I am working with the US Tax procedure TAXUSJ.
    I saved the purchase order without giving the tax code and with jurisdiction in PO, Incompletion populated as above message and after save po number end up with message termination with following message.
    Error Info...   FF 718: Tax code & does not exist for jurisdiction code &
    Can any body suggest me to fix this problem.
    Thanks in Advance,
    Lawrence Reddy.

    Hi,
    First check in t.code:OX10, jurisdiction code TAXUSJ is assigned to your plant or not, if not assign it and save.
    Now use t.code: OBCL & assign your tax code {see tax code must be input tax} with jurisdiction code TAXUSJ to your company code and save.
    Now try creating PO.
    NOTE:
    Also check all t.codes with assignments:
    1.OBBG,
    2.OBCO,
    3.OBYZ,
    4.OBCN,.
    Regards,
    Biju K

  • HT1657 When I try to play my rented movie I get an error 42110. Whats that mean?

    When I try to play my rented movie I get an error 42110. Whats that mean?

    Is this in iTunes, on an iPod/iPhone/iPad or AppleTV?
    Not sure what the error number is.
    If it's a portable device try restrating it by power cycling, if a computer reboot it and restrat iTunes - this may or may not work but cure an authorisation problem I had in itunes the other day.
    Good luck.

  • Could not create the Java virtual machine What happen?

    all,good day!
    i use tomcat7 and JRockit JVM;
    tomcat7 version info:
    Server version: Apache Tomcat/7.0.27
    Server built: Mar 31 2012 03:43:36
    Server number: 7.0.27.0
    OS Name: Linux
    OS Version: 2.6.32-220.el6.x86_64
    Architecture: amd64
    JVM Version: 1.6.0_02-b05
    JVM Vendor: BEA Systems, Inc.
    JRockit JVM version info:
    java version "1.6.0_29"
    Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
    Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
    in R28 jrdoc ,The -XgcPrio option is deprecated in Oracle JRockit R28. The option works in R28, but Oracle recommends that you use -Xgc instead. For more information, see -Xgc;
    in -Xgc option info lists the garbage collection modes that i can specify with the -Xgc option. pausetime mode in which the option；
    but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
    The configuration of the JVM attributes in Tomcat in catalina.sh
    export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
    the error info:
    [ERROR] Argument error: -Xgc:pausetime
    [ERROR] pausetime is not a valid garbage collector name for -Xgc.
    Valid options are: singlecon, gencon, genpar or parallel (singlepar).
    [WARN ] No unit entered for pause time target, assuming ms.
    Could not create the Java virtual machine.
    what's wrong in my configuration ?
    Edited by: 944618 on 2012-7-5 上午4:26

    I would add the jvm flag -showversion next to the -Xgc:pausetime flag, so you will see which JVM you're actually running.
    Also, the following part of your post is a bit inconsistent, which jvm flag are you actally using?
    "but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
    The configuration of the JVM attributes in Tomcat in catalina.sh
    export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
    the error info:
    [ERROR] Argument error: -Xgc:pausetime"
    The error output you posted looks like the error you would get from a R27 version of JRockit.

  • HT4527 Getting error code 12004 when trying to setup home share on a new laptop.  Can't find what it means.

    My daughter received a new macbook pro for Christmas and is trying to turn on home sharing in itunes and it is giving her an error code 12004 but we cannot find what that means.  Does anyone know where to find error codes and their definitions?

    First thing to do is get the CC off your system.  Then try the direct download option linked below...
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • "Please contact iTunes support to complete this transaction"...its shown everytime i try to purchase/download an application from my Ipad 2..whats that mean???

    "Please contact iTunes support to complete this transaction"...its shown everytime i try to purchase/download an application from my Ipad 2..whats that mean???

    It means that you need to contact iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    As to why you are getting the message, then it could be due to a number of reasons e.g. past billing issues, account issues ...

Maybe you are looking for