Number pad make my system freeze!

Dear all MAC user,
i dont know wht happen to my system and keyboard.
when i press any keys from the number pad from my keyboard, my system will freeze immediately (dock, status bar and the programme). my system will only back to normal after i forced quit the programme.
anyone know wht happen and help me to solve the prob?
by the way, im still consider myself as a new MAC user.
thanks a lot

You're covered for hardware for year, but they'll want a credit card number in case it's software.
Have you gone to universal access in system prefs to be sure you haven't accidentally enabled something like Mouse Keys or Sticky keys?

Similar Messages

  • Multi-clip - number pad makes marks, but no actual cuts?

    4 cameras.  Set up as multi-clip.  The toggle buttons work to cut the angles just fine.  But I can't get the keypad (number pad) to make the cuts.  It makes the marks on the fly.  When I stop the play the marks disappear and there are no actual cuts.  I've done this successfully many times before.  Can't figure out why it isn't working this time, why the marks don't become cuts when I stop the play.
    I bet I've mis-clicked something somewhere.
    Any ideas out there?
    Ben

    I gave you a 'This helped me ...' when in fact you deserved a 'This solved my question'.  Thank you mucho Michael.  I work days, weeks, months on FCP ... and forget that I can actually 'set' things differently.  I'm always amazed and pleased when I discover a new keystroke or something ... or rather, when someone introduces me to it.  And immediately incorporate it into my routine.  But I hardly ever go looking for the things.  I just want to get the film cut.  And in FCP, one can go on learning the techno forever it seems ... so many ways to do something.
    Really do appreciate your help.  This will very much speed up my day with a deadline looming.
    All the best,
    Ben
    P.S.  If there is any way I can go back and give you a "This solved my question," I would do it in a flash.

  • Firefox5 makes my system freeze (have to reboot only)!

    I'm using Firefix 5.0 Many times when I play video stream on one tab and close it during the stream still running my system stopped working (I can move the mouse pointer but can't click on anything and none of keyboard button including the ctrl-alt-del worked also.)
    I got a suggestion from mozillazine forum to disable all add-on and it seems help. However I don't know how to set it permanently so it keeps freezing my system regularly. So I really need a better solution here.
    PS One time it even freezes my system while I did not run any video stream on it.

    Actually I just did after posting this question. FF6 looks much better at first. I visited the same video page and close it and my system didn't freezed.
    However just before I cameback to this post, it happened again with video on Youtube. (my system freezed)
    PS I never experience anything like this with FF2 to FF4.

  • Screen flickering and system freezes when using Nouveau driver.

    I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
    I can't use the computer in that state so I force a shutdown.
    I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
    dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
    [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x373fffff] page 2M
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
    [ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
    [ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
    [ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
    [ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 57ff0000 00040
    [ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
    [ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 519MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x57feffff]
    [ 0.000000] On node 0 totalpages: 360319
    [ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1040 pages used for memmap
    [ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
    [ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2883328 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
    [ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc15ba000 - 0xc1646000 ( 560 kB)
    .data : 0xc141613e - 0xc15b9d80 (1679 kB)
    .text : 0xc1000000 - 0xc141613e (4184 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1908.551 MHz processor
    [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003404] Security Framework initialized
    [ 0.003415] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003432] Mount-cache hash table entries: 512
    [ 0.006819] Initializing cgroup subsys cpuacct
    [ 0.006822] Initializing cgroup subsys memory
    [ 0.006834] Initializing cgroup subsys devices
    [ 0.006837] Initializing cgroup subsys freezer
    [ 0.006840] Initializing cgroup subsys net_cls
    [ 0.006842] Initializing cgroup subsys blkio
    [ 0.006879] CPU: Physical Processor ID: 0
    [ 0.006882] CPU: Processor Core ID: 0
    [ 0.006885] mce: CPU supports 5 MCE banks
    [ 0.006896] LVT offset 0 assigned for vector 0xf9
    [ 0.006902] process: using AMD E400 aware idle routine
    [ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 4
    [ 0.007021] Freeing SMP alternatives: 16k freed
    [ 0.007977] ACPI: Core revision 20121018
    [ 0.015366] ftrace: allocating 18273 entries in 36 pages
    [ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
    [ 0.059999] Performance Events: AMD PMU driver.
    [ 0.059999] ... version: 0
    [ 0.059999] ... bit width: 48
    [ 0.059999] ... generic registers: 4
    [ 0.059999] ... value mask: 0000ffffffffffff
    [ 0.059999] ... max period: 00007fffffffffff
    [ 0.059999] ... fixed-purpose events: 0
    [ 0.059999] ... event mask: 000000000000000f
    [ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
    [ 0.083412] smpboot: Booting Node 0, Processors #1 OK
    [ 0.006666] Initializing CPU#1
    [ 0.176732] Brought up 2 CPUs
    [ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
    [ 0.177423] devtmpfs: initialized
    [ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
    [ 0.178162] RTC time: 21:06:38, date: 03/21/13
    [ 0.178225] NET: Registered protocol family 16
    [ 0.178397] node 0 link 0: io port [8000, ffff]
    [ 0.178401] TOM: 0000000060000000 aka 1536M
    [ 0.178404] node 0 link 0: mmio [a0000, bffff]
    [ 0.178408] node 0 link 0: mmio [60000000, efffffff]
    [ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
    [ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
    [ 0.178418] bus: [bus 00-04] on node 0 link 0
    [ 0.178421] bus: 00 [io 0x0000-0xffff]
    [ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
    [ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
    [ 0.178495] ACPI: bus type pci registered
    [ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.178581] PCI: Using MMCONFIG for extended config space
    [ 0.178583] PCI: Using configuration type 1 for base access
    [ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.178681] mtrr: corrected configuration.
    [ 0.180670] bio: create slab <bio-0> at 0
    [ 0.180670] ACPI: Added _OSI(Module Device)
    [ 0.180670] ACPI: Added _OSI(Processor Device)
    [ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.181260] ACPI: EC: Look up EC in DSDT
    [ 0.186070] ACPI: Interpreter enabled
    [ 0.186077] ACPI: (supports S0 S3 S4 S5)
    [ 0.186098] ACPI: Using IOAPIC for interrupt routing
    [ 0.193127] ACPI: No dock devices found.
    [ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
    [ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
    [ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
    [ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
    [ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
    [ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
    [ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
    [ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
    [ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
    [ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
    [ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
    [ 0.195066] PCI: root bus 00: hardware-probed resources
    [ 0.195117] PCI host bridge to bus 0000:00
    [ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
    [ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
    [ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
    [ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
    [ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
    [ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
    [ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
    [ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
    [ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
    [ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
    [ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
    [ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
    [ 0.195564] pci 0000:00:02.0: supports D1 D2
    [ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
    [ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
    [ 0.195639] pci 0000:00:02.1: supports D1 D2
    [ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
    [ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
    [ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
    [ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
    [ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
    [ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
    [ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
    [ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
    [ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
    [ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
    [ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
    [ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
    [ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
    [ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
    [ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
    [ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
    [ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
    [ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
    [ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
    [ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
    [ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
    [ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
    [ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
    [ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
    [ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
    [ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
    [ 0.196412] pci 0000:01:09.0: supports D1 D2
    [ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
    [ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
    [ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
    [ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
    [ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
    [ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196648] pci 0000:03:00.0: supports D1 D2
    [ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.203413] pci_bus 0000:00: on NUMA node 0
    [ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
    [ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
    [ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
    [ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
    [ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    [ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    [ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    [ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    [ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    [ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    [ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    [ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    [ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
    [ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    [ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    [ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    [ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    [ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.245086] vgaarb: loaded
    [ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
    [ 0.245086] PCI: Using ACPI for IRQ routing
    [ 0.246696] PCI: pci_cache_line_size set to 64 bytes
    [ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
    [ 0.246902] NetLabel: Initializing
    [ 0.246904] NetLabel: domain hash size = 128
    [ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.246923] NetLabel: unlabeled traffic allowed by default
    [ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
    [ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [ 0.256702] Switching to clocksource hpet
    [ 0.264319] pnp: PnP ACPI init
    [ 0.264346] ACPI: bus type pnp registered
    [ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
    [ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
    [ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
    [ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
    [ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
    [ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
    [ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
    [ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
    [ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
    [ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265458] pnp 00:02: [dma 4]
    [ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
    [ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
    [ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
    [ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
    [ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.267589] pnp: PnP ACPI: found 14 devices
    [ 0.267590] ACPI: ACPI bus type pnp unregistered
    [ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
    [ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
    [ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
    [ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305677] pci 0000:00:04.0: setting latency timer to 64
    [ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    [ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
    [ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
    [ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
    [ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
    [ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305804] NET: Registered protocol family 2
    [ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.306184] TCP: reno registered
    [ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306279] NET: Registered protocol family 1
    [ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370606] pci 0000:00:0d.0: Boot video device
    [ 0.370621] PCI: CLS 64 bytes, default 64
    [ 0.370687] Unpacking initramfs...
    [ 0.455995] Freeing initrd memory: 2900k freed
    [ 0.459106] apm: BIOS not found.
    [ 0.459448] audit: initializing netlink socket (disabled)
    [ 0.459468] type=2000 audit(1363899998.456:1): initialized
    [ 0.474029] bounce pool size: 64 pages
    [ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.476263] VFS: Disk quotas dquot_6.5.2
    [ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.476593] msgmni has been set to 1731
    [ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.477042] io scheduler noop registered
    [ 0.477044] io scheduler deadline registered
    [ 0.477053] io scheduler cfq registered (default)
    [ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
    [ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
    [ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
    [ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [ 0.477471] vesafb: scrolling: redraw
    [ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
    [ 0.484141] Console: switching to colour frame buffer device 80x30
    [ 0.490611] fb0: VESA VGA frame buffer device
    [ 0.490704] GHES: HEST is not enabled!
    [ 0.490719] isapnp: Scanning for PnP cards...
    [ 0.802592] isapnp: No Plug & Play device found
    [ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.845087] mousedev: PS/2 mouse device common for all mice
    [ 0.845182] rtc_cmos 00:04: RTC can wake from S4
    [ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 0.845435] cpuidle: using governor ladder
    [ 0.845437] cpuidle: using governor menu
    [ 0.845439] EFI Variables Facility v0.08 2004-May-17
    [ 0.845489] drop_monitor: Initializing network drop monitor service
    [ 0.845593] TCP: cubic registered
    [ 0.845736] NET: Registered protocol family 10
    [ 0.845940] NET: Registered protocol family 17
    [ 0.845958] Key type dns_resolver registered
    [ 0.846129] Using IPI No-Shortcut mode
    [ 0.846264] PM: Hibernation image not present or could not be loaded.
    [ 0.846279] registered taskstats version 1
    [ 0.846851] Magic number: 5:851:146
    [ 0.846912] acpi device:17: hash matches
    [ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
    [ 0.847246] Freeing unused kernel memory: 560k freed
    [ 0.847645] Write protecting the kernel text: 4188k
    [ 0.847679] Write protecting the kernel read-only data: 1284k
    [ 0.858078] systemd-udevd[45]: starting version 198
    [ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.904637] ACPI: bus type usb registered
    [ 0.904681] usbcore: registered new interface driver usbfs
    [ 0.904697] usbcore: registered new interface driver hub
    [ 0.904815] usbcore: registered new device driver usb
    [ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [ 0.910252] ehci-pci: EHCI PCI platform driver
    [ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
    [ 0.912040] SCSI subsystem initialized
    [ 0.915768] ACPI: bus type scsi registered
    [ 0.918637] libata version 3.00 loaded.
    [ 0.962268] hub 1-0:1.0: USB hub found
    [ 0.962279] hub 1-0:1.0: 10 ports detected
    [ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
    [ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
    [ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
    [ 0.962559] ehci-pci 0000:00:02.1: debug port 1
    [ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
    [ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
    [ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [ 0.970261] hub 2-0:1.0: USB hub found
    [ 0.970268] hub 2-0:1.0: 10 ports detected
    [ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
    [ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 0.971618] scsi0 : pata_amd
    [ 0.972200] scsi1 : pata_amd
    [ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 0.972517] sata_nv 0000:00:08.0: version 3.5
    [ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
    [ 0.973161] scsi2 : sata_nv
    [ 0.973470] scsi3 : sata_nv
    [ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
    [ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
    [ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
    [ 0.974209] scsi4 : sata_nv
    [ 0.974369] scsi5 : sata_nv
    [ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
    [ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
    [ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
    [ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
    [ 1.143604] ata1.00: configured for UDMA/66
    [ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
    [ 1.149876] ata2: port disabled--ignoring
    [ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
    [ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
    [ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
    [ 1.936808] usbcore: registered new interface driver usbhid
    [ 1.936814] usbhid: USB HID core driver
    [ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
    [ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.120325] ata6.00: configured for UDMA/133
    [ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    [ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
    [ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
    [ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.146217] sda: sda1 sda2 sda3
    [ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
    [ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
    [ 2.407819] Initializing USB Mass Storage driver...
    [ 2.408184] scsi6 : usb-storage 1-8:1.0
    [ 2.408335] usbcore: registered new interface driver usb-storage
    [ 2.408337] USB Mass Storage support registered.
    [ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
    [ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
    [ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
    [ 3.353005] systemd[1]: Starting Remote File Systems.
    [ 3.353024] systemd[1]: Reached target Remote File Systems.
    [ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.353274] systemd[1]: Starting Journal Socket.
    [ 3.353366] systemd[1]: Listening on Journal Socket.
    [ 3.354821] systemd[1]: Starting Apply Kernel Variables...
    [ 3.357143] systemd[1]: Mounting Huge Pages File System...
    [ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.370154] systemd[1]: Mounting Debug File System...
    [ 3.385832] systemd[1]: Starting Journal Service...
    [ 3.393610] systemd[1]: Started Journal Service.
    [ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.407389] systemd[1]: Starting Encrypted Volumes.
    [ 3.407409] systemd[1]: Reached target Encrypted Volumes.
    [ 3.407431] systemd[1]: Starting Setup Virtual Console...
    [ 3.410492] systemd[1]: Starting udev Kernel Socket.
    [ 3.410553] systemd[1]: Listening on udev Kernel Socket.
    [ 3.410641] systemd[1]: Starting udev Control Socket.
    [ 3.410689] systemd[1]: Listening on udev Control Socket.
    [ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
    [ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    [ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    [ 3.441505] systemd[1]: Started Load Kernel Modules.
    [ 3.441546] systemd[1]: Mounted FUSE Control File System.
    [ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.441693] systemd[1]: Mounting Configuration File System...
    [ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    [ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    [ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
    [ 3.553856] systemd[1]: Mounting Temporary Directory...
    [ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [ 3.744908] systemd-udevd[126]: starting version 198
    [ 3.777101] systemd[1]: Started File System Check on Root Device.
    [ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.790819] systemd[1]: Started udev Kernel Device Manager.
    [ 3.800185] systemd[1]: Started Apply Kernel Variables.
    [ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 4.205364] systemd-journald[122]: Received SIGUSR1
    [ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
    [ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
    [ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 5.484570] ACPI: Power Button [PWRB]
    [ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 5.484697] ACPI: Power Button [PWRF]
    [ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
    [ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
    [ 5.547898] Linux agpgart interface v0.103
    [ 5.558914] ACPI: Fan [FAN] (on)
    [ 5.559089] [drm] Initialized drm 1.1.0 20060810
    [ 5.565468] microcode: AMD CPU family 0xf not supported
    [ 5.567533] microcode: AMD CPU family 0xf not supported
    [ 5.642735] wmi: Mapper loaded
    [ 5.645076] kvm: Nested Virtualization enabled
    [ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
    [ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
    [ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
    [ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
    [ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
    [ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 5.685594] Console: switching to colour dummy device 80x25
    [ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
    [ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
    [ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
    [ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
    [ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
    [ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
    [ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
    [ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
    [ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
    [ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
    [ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
    [ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
    [ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
    [ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
    [ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
    [ 5.761381] [TTM] Initializing pool allocator
    [ 5.761831] nouveau [ DRM] VRAM: 125 MiB
    [ 5.761838] nouveau [ DRM] GART: 512 MiB
    [ 5.761844] nouveau [ DRM] BIT BIOS found
    [ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
    [ 5.761852] nouveau [ DRM] TMDS table version 1.1
    [ 5.761855] nouveau [ DRM] DCB version 3.0
    [ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
    [ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
    [ 5.761865] nouveau [ DRM] DCB conn 00: 0000
    [ 5.761869] nouveau [ DRM] DCB conn 01: 1131
    [ 5.761872] nouveau [ DRM] DCB conn 02: 0110
    [ 5.761875] nouveau [ DRM] DCB conn 03: 0111
    [ 5.761877] nouveau [ DRM] DCB conn 04: 0113
    [ 5.762420] nouveau W[ DRM] DCB type 4 not known
    [ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
    [ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.763283] [drm] No driver support for vblank timestamp query.
    [ 5.763931] nouveau [ DRM] 1 available performance level(s)
    [ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
    [ 5.763939] nouveau [ DRM] c:
    [ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
    [ 5.811870] sky2: driver version 1.30
    [ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    [ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
    [ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
    [ 5.814804] composite sync not supported
    [ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
    [ 5.815425] fbcon: nouveaufb (fb0) is primary device
    [ 5.829143] IT8726 SuperIO detected.
    [ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
    [ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 5.856121] ppdev: user-space parallel port driver
    [ 5.877128] Console: switching to colour frame buffer device 180x56
    [ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
    [ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
    [ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
    [ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
    [ 5.879730] hda_intel: Disabling MSI
    [ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
    [ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
    [ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
    [ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
    [ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
    [ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
    [ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
    [ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
    [ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
    [ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
    [ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
    [ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
    [ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
    [ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
    [ 8.208529] composite sync not supported
    [ 8.244451] composite sync not supported
    [ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
    [ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    [ 20.811802] composite sync not supported
    [ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
    [ 84.047784] usb 1-4: USB disconnect, device number 2
    [ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
    [ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
    [ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 389.250323] composite sync not supported
    Xorg log:
    [ 7.949]
    X.Org X Server 1.14.0
    Release Date: 2013-03-05
    [ 7.949] X Protocol Version 11, Revision 0
    [ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
    [ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
    [ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 7.949] Build Date: 09 March 2013 11:46:22AM
    [ 7.949]
    [ 7.949] Current version of pixman: 0.28.2
    [ 7.949] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
    [ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8.001] (==) No Layout section. Using the first Screen section.
    [ 8.001] (==) No screen section available. Using defaults.
    [ 8.001] (**) |-->Screen "Default Screen Section" (0)
    [ 8.001] (**) | |-->Monitor "<default monitor>"
    [ 8.011] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 8.011] (==) Automatically adding devices
    [ 8.011] (==) Automatically enabling devices
    [ 8.011] (==) Automatically adding GPU devices
    [ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 8.060] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8.060] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8.069] (II) Loader magic: 0x825b620
    [ 8.069] (II) Module ABI versions:
    [ 8.069] X.Org ANSI C Emulation: 0.4
    [ 8.069] X.Org Video Driver: 14.1
    [ 8.069] X.Org XInput driver : 19.1
    [ 8.069] X.Org Server Extension : 7.0
    [ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 8.073] Initializing built-in extension Generic Event Extension
    [ 8.073] Initializing built-in extension SHAPE
    [ 8.073] Initializing built-in extension MIT-SHM
    [ 8.073] Initializing built-in extension XInputExtension
    [ 8.073] Initializing built-in extension XTEST
    [ 8.073] Initializing built-in extension BIG-REQUESTS
    [ 8.073] Initializing built-in extension SYNC
    [ 8.073] Initializing built-in extension XKEYBOARD
    [ 8.073] Initializing built-in extension XC-MISC
    [ 8.073] Initializing built-in extension SECURITY
    [ 8.073] Initializing built-in extension XINERAMA
    [ 8.073] Initializing built-in extension XFIXES
    [ 8.073] Initializing built-in extension RENDER
    [ 8.073] Initializing built-in extension RANDR
    [ 8.073] Initializing built-in extension COMPOSITE
    [ 8.073] Initializing built-in extension DAMAGE
    [ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8.073] Initializing built-in extension DOUBLE-BUFFER
    [ 8.073] Initializing built-in extension RECORD
    [ 8.073] Initializing built-in extension DPMS
    [ 8.073] Initializing built-in extension X-Resource
    [ 8.073] Initializing built-in extension XVideo
    [ 8.073] Initializing built-in extension XVideo-MotionCompensation
    [ 8.073] Initializing built-in extension XFree86-VidModeExtension
    [ 8.073] Initializing built-in extension XFree86-DGA
    [ 8.073] Initializing built-in extension XFree86-DRI
    [ 8.073] Initializing built-in extension DRI2
    [ 8.073] (II) LoadModule: "glx"
    [ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8.133] (II) Module glx: vendor="X.Org Foundation"
    [ 8.133] compiled for 1.14.0, module version = 1.0.0
    [ 8.133] ABI class: X.Org Server Extension, version 7.0
    [ 8.133] (==) AIGLX enabled
    [ 8.134] Loading extension GLX
    [ 8.134] (==) Matched nouveau as autoconfigured driver 0
    [ 8.134] (==) Matched nvidia as autoconfigured driver 1
    [ 8.134] (==) Matched nv as autoconfigured driver 2
    [ 8.134] (==) Matched nouveau as autoconfigured driver 3
    [ 8.134] (==) Matched nvidia as autoconfigured driver 4
    [ 8.134] (==) Matched nv as autoconfigured driver 5
    [ 8.134] (==) Matched vesa as autoconfigured driver 6
    [ 8.134] (==) Matched modesetting as autoconfigured driver 7
    [ 8.134] (==) Matched fbdev as autoconfigured driver 8
    [ 8.134] (==) Assigned the driver to the xf86ConfigLayout
    [ 8.134] (II) LoadModule: "nouveau"
    [ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
    [ 8.154] compiled for 1.14.0, module version = 1.0.6
    [ 8.154] Module class: X.Org Video Driver
    [ 8.154] ABI class: X.Org Video Driver, version 14.1
    [ 8.154] (II) LoadModule: "nvidia"
    [ 8.155] (WW) Warning, couldn't open module nvidia
    [ 8.155] (II) UnloadModule: "nvidia"
    [ 8.155] (II) Unloading nvidia
    [ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "nv"
    [ 8.155] (WW) Warning, couldn't open module nv
    [ 8.155] (II) UnloadModule: "nv"
    [ 8.155] (II) Unloading nv
    [ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "vesa"
    [ 8.156] (WW) Warning, couldn't open module vesa
    [ 8.156] (II) UnloadModule: "vesa"
    [ 8.156] (II) Unloading vesa
    [ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 8.156] (II) LoadModule: "modesetting"
    [ 8.156] (WW) Warning, couldn't open module modesetting
    [ 8.156] (II) UnloadModule: "modesetting"
    [ 8.156] (II) Unloading modesetting
    [ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 8.157] (II) LoadModule: "fbdev"
    [ 8.157] (WW) Warning, couldn't open module fbdev
    [ 8.157] (II) UnloadModule: "fbdev"
    [ 8.157] (II) Unloading fbdev
    [ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 8.157] (II) NOUVEAU driver
    [ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 8.157] RIVA TNT (NV04)
    [ 8.157] RIVA TNT2 (NV05)
    [ 8.157] GeForce 256 (NV10)
    [ 8.157] GeForce 2 (NV11, NV15)
    [ 8.157] GeForce 4MX (NV17, NV18)
    [ 8.157] GeForce 3 (NV20)
    [ 8.158] GeForce 4Ti (NV25, NV28)
    [ 8.158] GeForce FX (NV3x)
    [ 8.158] GeForce 6 (NV4x)
    [ 8.158] GeForce 7 (G7x)
    [ 8.158] GeForce 8 (G8x)
    [ 8.158] GeForce GTX 200 (NVA0)
    [ 8.158] GeForce GTX 400 (NVC0)
    [ 8.158] (++) using VT number 7
    [ 8.175] (II) [drm] nouveau interface version: 1.1.0
    [ 8.175] (II) Loading sub module "dri"
    [ 8.175] (II) LoadModule: "dri"
    [ 8.175] (II) Module "dri" already built-in
    [ 8.175] (II) NOUVEAU(0): Loaded DRI module
    [ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
    [ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 8.175] (==) NOUVEAU(0): RGB weight 888
    [ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
    [ 8.175] (==) NOUVEAU(0): Using HW cursor
    [ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 8.175] (==) NOUVEAU(0): Page flipping enabled
    [ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
    [ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
    [ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
    [ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
    [ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
    [ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
    [ 8.245] (II) NOUVEAU(0): Gamma: 2.20
    [ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 8.245] (II) NOUVEAU(0): Default color space is primary color space
    [ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
    [ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
    [ 8.245] (II) NOUVEAU(0): Supported established timings:
    [ 8.245] (II) NOUVEAU(0): 720x400@70Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@60Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@67Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@72Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@75Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@56Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@60Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@72Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@75Hz
    [ 8.245] (II) NOUVEAU(0): 832x624@75Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
    [ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
    [ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 8.245] (II) NOUVEAU(0): Supported standard timings:
    [ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
    [ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 8.245] (II) NOUVEAU(0): Supported detailed timing:
    [ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
    [ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
    [ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
    [ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
    [ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
    [ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
    [ 8.245] (II) NOUVEAU(0): EDID (in hex):
    [ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
    [ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
    [ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
    [ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
    [ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
    [ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
    [ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
    [ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
    [ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • System freezing

    Hi all.
    I would first like to say thank you in advance to anyone who takes the time to look at this. 
    I am new to archlinux and semi new to linux in general.  I have installed arch on my desktop and it runs fine for what seems like a random amount of time.  Xfce just freezes and I can not do anything to make the system responsive.  control-alt-backspace,  SysRq keys, virtual console switching, etc.  Nothing seems to work.  I can not even SSH into the box from another machine once it has locked up. 
    Any help anyone can give me would be greatly greatly appreciated.
    I have attached some of my logs below along with lsmod, lspci dmesg output in case that helps.
    EDIT:
    I have edited my post and put my output between code tags.  Sorry about that.  New to the forums and I was not sure what the proper etiquette was.  Posting my logs and command output as raw text felt wrong but I was not sure what the alternative was.  I see now that with a bit of research I should have been able to find the correct way to post that stuff.  I apologise for littering up the forum. 
    lspci output:
    00:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a3)
    00:01.0 ISA bridge: NVIDIA Corporation CK804 ISA Bridge (rev a3)
    00:01.1 SMBus: NVIDIA Corporation CK804 SMBus (rev a2)
    00:02.0 USB controller: NVIDIA Corporation CK804 USB Controller (rev a2)
    00:02.1 USB controller: NVIDIA Corporation CK804 USB Controller (rev a3)
    00:04.0 Multimedia audio controller: NVIDIA Corporation CK804 AC'97 Audio Controller (rev a2)
    00:06.0 IDE interface: NVIDIA Corporation CK804 IDE (rev a2)
    00:07.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev a3)
    00:08.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev a3)
    00:09.0 PCI bridge: NVIDIA Corporation CK804 PCI Bridge (rev a2)
    00:0a.0 Bridge: NVIDIA Corporation CK804 Ethernet Controller (rev a3)
    00:0b.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:0c.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:0d.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:0e.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:00.0 VGA compatible controller: NVIDIA Corporation NV45 [GeForce 6800 GTO] (rev a2)
    05:07.0 Network controller: Broadcom Corporation BCM4306 802.11bg Wireless Network Controller (rev 02)
    05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
    05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
    05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
    lsmod output:
    Module Size Used by
    aes_i586 6940 2
    cryptd 7023 0
    aes_generic 26054 1 aes_i586
    nvidia 10925239 40
    arc4 1118 2
    b43legacy 94382 0
    mac80211 336883 1 b43legacy
    cfg80211 153196 2 mac80211,b43legacy
    rfkill 12600 1 cfg80211
    ssb 41732 1 b43legacy
    snd_intel8x0 22672 2
    snd_cs4236 22144 0
    pcmcia 31438 1 ssb
    snd_mpu401 3568 0
    snd_wavefront 28274 0
    mmc_core 73191 1 ssb
    snd_ac97_codec 89900 1 snd_intel8x0
    snd_wss_lib 18115 2 snd_wavefront,snd_cs4236
    agpgart 22159 1 nvidia
    i2c_nforce2 4456 0
    forcedeth 50249 0
    snd_mpu401_uart 4943 3 snd_wavefront,snd_mpu401,snd_cs4236
    floppy 49063 0
    pcmcia_core 10241 1 pcmcia
    i2c_core 16845 2 i2c_nforce2,nvidia
    ac97_bus 874 1 snd_ac97_codec
    snd_rawmidi 15014 2 snd_mpu401_uart,snd_wavefront
    skge 34779 0
    evdev 7310 6
    snd_pcm 60499 4 snd_wss_lib,snd_ac97_codec,snd_cs4236,snd_intel8x0
    snd_opl3_lib 7218 2 snd_wavefront,snd_cs4236
    snd_page_alloc 5901 3 snd_pcm,snd_wss_lib,snd_intel8x0
    snd_hwdep 4970 2 snd_opl3_lib,snd_wavefront
    snd_seq_device 4316 2 snd_opl3_lib,snd_rawmidi
    snd_timer 15158 3 snd_opl3_lib,snd_pcm,snd_wss_lib
    firewire_ohci 27283 0
    snd 45013 17 snd_timer,snd_seq_device,snd_hwdep,snd_opl3_lib,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_wss_lib,snd_ac97_codec,snd_wavefront,snd_mpu401,snd_cs4236,snd_intel8x0
    firewire_core 44257 1 firewire_ohci
    soundcore 4986 1 snd
    ppdev 4750 0
    serio_raw 3709 0
    pcspkr 1423 0
    parport_pc 26601 0
    parport 26479 2 parport_pc,ppdev
    k8temp 2583 0
    ns558 1831 0
    processor 23476 0
    fan 1902 0
    gameport 6680 2 ns558
    joydev 7663 0
    asus_atk0110 8888 0
    crc_itu_t 1095 1 firewire_core
    button 3614 0
    thermal 6563 0
    ext4 384668 3
    crc16 1091 1 ext4
    jbd2 60590 1 ext4
    mbcache 4345 1 ext4
    hid_logitech 14128 0
    ff_memless 3806 1 hid_logitech
    sr_mod 13148 0
    cdrom 30504 1 sr_mod
    usbhid 31477 1 hid_logitech
    hid 66633 2 usbhid,hid_logitech
    sd_mod 25867 5
    pata_acpi 2388 0
    sata_sil 6200 4
    pata_amd 8155 0
    ata_generic 2391 0
    sata_nv 17444 0
    ohci_hcd 19120 0
    ehci_hcd 38640 0
    libata 145743 5 sata_nv,ata_generic,pata_amd,sata_sil,pata_acpi
    scsi_mod 112765 3 libata,sd_mod,sr_mod
    usbcore 122751 4 ehci_hcd,ohci_hcd,usbhid
    usb_common 622 1 usbcore
    dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
    [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: Magnell System name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE ACPI BIOS Revision 1002 11/26/2004
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f5ad0] f5ad0
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fd18000 - 3ffe0000
    [ 0.000000] Allocated new RAMDISK: 37536000 - 377fd47f
    [ 0.000000] Move RAMDISK from 000000003fd18000 - 000000003ffdf47e to 37536000 - 377fd47e
    [ 0.000000] ACPI: RSDP 000f7cc0 00014 (v00 Nvidia)
    [ 0.000000] ACPI: RSDT 3fff3000 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 3fff30c0 062CE (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 3fff0000 00040
    [ 0.000000] ACPI: MCFG 3fff9440 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 3fff93c0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 135MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0003fff0
    [ 0.000000] On node 0 totalpages: 262014
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d35200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 272 pages used for memmap
    [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    [ 0.000000] If you got timer trouble try acpi_use_timer_override
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6800000 s30848 r0 d22400 u4194304
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u4194304 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259966
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/0f476df3-b4ef-47c6-910c-e31b7d180cfc ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2096896 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
    [ 0.000000] Memory: 1027408k/1048512k available (3774k kernel code, 20648k reserved, 1434k data, 520k init, 139208k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af8a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af8a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2211.336 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 4424.95 BogoMIPS (lpj=7371120)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006704] Security Framework initialized
    [ 0.006709] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006734] Mount-cache hash table entries: 512
    [ 0.006880] Initializing cgroup subsys cpuacct
    [ 0.006883] Initializing cgroup subsys memory
    [ 0.006893] Initializing cgroup subsys devices
    [ 0.006897] Initializing cgroup subsys freezer
    [ 0.006900] Initializing cgroup subsys net_cls
    [ 0.006903] Initializing cgroup subsys blkio
    [ 0.006929] mce: CPU supports 5 MCE banks
    [ 0.007008] SMP alternatives: switching to UP code
    [ 0.013215] Freeing SMP alternatives: 16k freed
    [ 0.013228] ACPI: Core revision 20120111
    [ 0.018138] ftrace: allocating 16619 entries in 33 pages
    [ 0.023395] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023703] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [ 0.057240] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00
    [ 0.059996] Performance Events: AMD PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 48
    [ 0.059996] ... generic registers: 4
    [ 0.059996] ... value mask: 0000ffffffffffff
    [ 0.059996] ... max period: 00007fffffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000000000f
    [ 0.076766] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.083331] Brought up 1 CPUs
    [ 0.083334] Total of 1 processors activated (4424.95 BogoMIPS).
    [ 0.083805] devtmpfs: initialized
    [ 0.083951] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
    [ 0.084999] NET: Registered protocol family 16
    [ 0.085101] node 0 link 0: io port [1000, fffff]
    [ 0.085104] TOM: 0000000040000000 aka 1024M
    [ 0.085107] node 0 link 0: mmio [e0000000, ef00ffff]
    [ 0.085111] node 0 link 0: mmio [a0000, bffff]
    [ 0.085114] node 0 link 0: mmio [40000000, fed3ffff]
    [ 0.085116] TOM2: 0000000000000000 aka 0M
    [ 0.085119] bus: [00, ff] on node 0 link 0
    [ 0.085121] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.085124] bus: 00 index 1 [mem 0x40000000-0xffffffff]
    [ 0.085126] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
    [ 0.085153] ACPI: bus type pci registered
    [ 0.085216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.085220] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.085222] PCI: Using MMCONFIG for extended config space
    [ 0.085224] PCI: Using configuration type 1 for base access
    [ 0.085812] bio: create slab <bio-0> at 0
    [ 0.085870] ACPI: Added _OSI(Module Device)
    [ 0.085873] ACPI: Added _OSI(Processor Device)
    [ 0.085875] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.085877] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.086779] ACPI: EC: Look up EC in DSDT
    [ 0.087811] ACPI: Actual Package length (5) is larger than NumElements field (4), truncated
    [ 0.087815]
    [ 0.090599] ACPI: Interpreter enabled
    [ 0.090605] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.090625] ACPI: Using IOAPIC for interrupt routing
    [ 0.095876] ACPI: No dock devices found.
    [ 0.095882] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.095930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.095989] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.095992] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.095995] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.095998] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [ 0.096001] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
    [ 0.096004] PCI: root bus 00: hardware-probed resources
    [ 0.096044] PCI host bridge to bus 0000:00
    [ 0.096047] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.096050] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
    [ 0.096053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.096066] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
    [ 0.096132] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
    [ 0.096151] HPET not enabled in BIOS. You might try hpet=force boot option
    [ 0.096162] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
    [ 0.096170] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f]
    [ 0.096181] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
    [ 0.096186] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
    [ 0.096200] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.096215] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
    [ 0.096223] pci 0000:00:02.0: reg 10: [mem 0xd5004000-0xd5004fff]
    [ 0.096247] pci 0000:00:02.0: supports D1 D2
    [ 0.096249] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096261] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
    [ 0.096269] pci 0000:00:02.1: reg 10: [mem 0xd5005000-0xd50050ff]
    [ 0.096299] pci 0000:00:02.1: supports D1 D2
    [ 0.096301] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096319] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
    [ 0.096326] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff]
    [ 0.096331] pci 0000:00:04.0: reg 14: [io 0xe000-0xe0ff]
    [ 0.096336] pci 0000:00:04.0: reg 18: [mem 0xd5003000-0xd5003fff]
    [ 0.096357] pci 0000:00:04.0: supports D1 D2
    [ 0.096367] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
    [ 0.096383] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
    [ 0.096406] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
    [ 0.096413] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.096418] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.096423] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
    [ 0.096427] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.096432] pci 0000:00:07.0: reg 20: [io 0xd800-0xd80f]
    [ 0.096437] pci 0000:00:07.0: reg 24: [mem 0xd5002000-0xd5002fff]
    [ 0.096457] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
    [ 0.096464] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
    [ 0.096469] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
    [ 0.096474] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
    [ 0.096479] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
    [ 0.096484] pci 0000:00:08.0: reg 20: [io 0xc400-0xc40f]
    [ 0.096489] pci 0000:00:08.0: reg 24: [mem 0xd5001000-0xd5001fff]
    [ 0.096508] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
    [ 0.096525] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
    [ 0.096533] pci 0000:00:0a.0: reg 10: [mem 0xd5000000-0xd5000fff]
    [ 0.096538] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb007]
    [ 0.096561] pci 0000:00:0a.0: supports D1 D2
    [ 0.096563] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096575] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
    [ 0.096603] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096617] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
    [ 0.096643] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096658] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
    [ 0.096688] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096702] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
    [ 0.096727] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096744] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.096764] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.096780] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.096795] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.096829] pci 0000:05:07.0: [14e4:4325] type 0 class 0x000280
    [ 0.096838] pci 0000:05:07.0: reg 10: [mem 0xd4008000-0xd4009fff]
    [ 0.096879] pci 0000:05:0a.0: [1095:3114] type 0 class 0x000104
    [ 0.096890] pci 0000:05:0a.0: reg 10: [io 0x9000-0x9007]
    [ 0.096897] pci 0000:05:0a.0: reg 14: [io 0x9400-0x9403]
    [ 0.096904] pci 0000:05:0a.0: reg 18: [io 0x9800-0x9807]
    [ 0.096911] pci 0000:05:0a.0: reg 1c: [io 0x9c00-0x9c03]
    [ 0.096918] pci 0000:05:0a.0: reg 20: [io 0xa000-0xa00f]
    [ 0.096924] pci 0000:05:0a.0: reg 24: [mem 0xd400a000-0xd400a3ff]
    [ 0.096932] pci 0000:05:0a.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.096948] pci 0000:05:0a.0: supports D1 D2
    [ 0.096962] pci 0000:05:0b.0: [104c:8023] type 0 class 0x000c00
    [ 0.096973] pci 0000:05:0b.0: reg 10: [mem 0xd400b000-0xd400b7ff]
    [ 0.096981] pci 0000:05:0b.0: reg 14: [mem 0xd4000000-0xd4003fff]
    [ 0.097022] pci 0000:05:0b.0: supports D1 D2
    [ 0.097024] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
    [ 0.097040] pci 0000:05:0c.0: [11ab:4320] type 0 class 0x000200
    [ 0.097052] pci 0000:05:0c.0: reg 10: [mem 0xd4004000-0xd4007fff]
    [ 0.097059] pci 0000:05:0c.0: reg 14: [io 0xa400-0xa4ff]
    [ 0.097084] pci 0000:05:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.097107] pci 0000:05:0c.0: supports D1 D2
    [ 0.097109] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.097130] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.097134] pci 0000:00:09.0: bridge window [io 0x9000-0xafff]
    [ 0.097137] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
    [ 0.097141] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.097144] pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
    [ 0.097147] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.097166] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
    [ 0.097188] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
    [ 0.097210] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
    [ 0.097240] pci 0000:01:00.0: [10de:00f9] type 0 class 0x000300
    [ 0.097251] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
    [ 0.097260] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
    [ 0.097269] pci 0000:01:00.0: reg 18: [mem 0xd1000000-0xd1ffffff]
    [ 0.097295] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.097328] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.097335] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
    [ 0.097340] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
    [ 0.097344] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.097353] pci_bus 0000:00: on NUMA node 0
    [ 0.097356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.097491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.097660] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.097663] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.097665] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.127307] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127351] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
    [ 0.127398] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.127442] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.127483] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127524] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127566] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127609] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.127654] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
    [ 0.127696] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127738] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127780] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127821] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127869] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 *12 14 15)
    [ 0.127920] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.127969] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.128000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
    [ 0.128028] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
    [ 0.128055] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
    [ 0.128082] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
    [ 0.128108] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    [ 0.128165] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128221] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128278] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    [ 0.128333] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
    [ 0.128389] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128444] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128500] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128559] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128619] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.128680] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.128739] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128845] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.128848] vgaarb: loaded
    [ 0.128850] vgaarb: bridge control possible 0000:01:00.0
    [ 0.128906] PCI: Using ACPI for IRQ routing
    [ 0.133715] PCI: pci_cache_line_size set to 64 bytes
    [ 0.133765] reserve RAM buffer: 000000000009e400 - 000000000009ffff
    [ 0.133768] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
    [ 0.133884] NetLabel: Initializing
    [ 0.133886] NetLabel: domain hash size = 128
    [ 0.133887] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.133902] NetLabel: unlabeled traffic allowed by default
    [ 0.140087] pnp: PnP ACPI init
    [ 0.140107] ACPI: bus type pnp registered
    [ 0.140135] pnp 00:00: [io 0x4000-0x407f]
    [ 0.140137] pnp 00:00: [io 0x4080-0x40ff]
    [ 0.140139] pnp 00:00: [io 0x4400-0x447f]
    [ 0.140142] pnp 00:00: [io 0x4480-0x44ff]
    [ 0.140144] pnp 00:00: [io 0x4800-0x487f]
    [ 0.140146] pnp 00:00: [io 0x4880-0x48ff]
    [ 0.140205] system 00:00: [io 0x4000-0x407f] has been reserved
    [ 0.140208] system 00:00: [io 0x4080-0x40ff] has been reserved
    [ 0.140211] system 00:00: [io 0x4400-0x447f] has been reserved
    [ 0.140214] system 00:00: [io 0x4480-0x44ff] has been reserved
    [ 0.140217] system 00:00: [io 0x4800-0x487f] has been reserved
    [ 0.140220] system 00:00: [io 0x4880-0x48ff] has been reserved
    [ 0.140224] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.140304] pnp 00:01: [bus 00-ff]
    [ 0.140307] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.140309] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.140312] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.140315] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.140317] pnp 00:01: [mem 0x000c0000-0x000dffff window]
    [ 0.140320] pnp 00:01: [mem 0x40000000-0xfebfffff window]
    [ 0.140371] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.140823] pnp 00:02: [io 0x0010-0x001f]
    [ 0.140826] pnp 00:02: [io 0x0022-0x003f]
    [ 0.140828] pnp 00:02: [io 0x0044-0x005f]
    [ 0.140830] pnp 00:02: [io 0x0062-0x0063]
    [ 0.140832] pnp 00:02: [io 0x0065-0x006f]
    [ 0.140834] pnp 00:02: [io 0x0074-0x007f]
    [ 0.140836] pnp 00:02: [io 0x0091-0x0093]
    [ 0.140838] pnp 00:02: [io 0x00a2-0x00bf]
    [ 0.140841] pnp 00:02: [io 0x00e0-0x00ef]
    [ 0.140843] pnp 00:02: [io 0x04d0-0x04d1]
    [ 0.140845] pnp 00:02: [io 0x0800-0x0805]
    [ 0.140847] pnp 00:02: [io 0x0290-0x0297]
    [ 0.140906] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 0.140909] system 00:02: [io 0x0800-0x0805] has been reserved
    [ 0.140912] system 00:02: [io 0x0290-0x0297] has been reserved
    [ 0.140915] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.140927] pnp 00:03: [dma 4]
    [ 0.140929] pnp 00:03: [io 0x0000-0x000f]
    [ 0.140932] pnp 00:03: [io 0x0080-0x0090]
    [ 0.140934] pnp 00:03: [io 0x0094-0x009f]
    [ 0.140936] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.140974] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.140985] pnp 00:04: [io 0x0070-0x0073]
    [ 0.140995] pnp 00:04: [irq 8]
    [ 0.141031] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.141041] pnp 00:05: [io 0x0061]
    [ 0.141076] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.141085] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.141090] pnp 00:06: [irq 13]
    [ 0.141129] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.141262] pnp 00:07: [io 0x03f0-0x03f5]
    [ 0.141265] pnp 00:07: [io 0x03f7]
    [ 0.141269] pnp 00:07: [irq 6]
    [ 0.141271] pnp 00:07: [dma 2]
    [ 0.141320] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.141497] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.141502] pnp 00:08: [irq 4]
    [ 0.141574] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.141956] pnp 00:09: [io 0x0378-0x037f]
    [ 0.141958] pnp 00:09: [io 0x0778-0x077b]
    [ 0.141963] pnp 00:09: [irq 7]
    [ 0.141965] pnp 00:09: [dma 3]
    [ 0.142032] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.142245] pnp 00:0a: [io 0x0330-0x0331]
    [ 0.142249] pnp 00:0a: [irq 10]
    [ 0.142302] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
    [ 0.142465] pnp 00:0b: [io 0x0201]
    [ 0.142513] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
    [ 0.142530] pnp 00:0c: [mem 0xe0000000-0xefffffff]
    [ 0.142585] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.142588] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142682] pnp 00:0d: [mem 0x000d9000-0x000dbfff]
    [ 0.142684] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
    [ 0.142687] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
    [ 0.142689] pnp 00:0d: [mem 0x000fc000-0x000fffff]
    [ 0.142691] pnp 00:0d: [mem 0x3fff0000-0x3fffffff]
    [ 0.142694] pnp 00:0d: [mem 0xffff0000-0xffffffff]
    [ 0.142696] pnp 00:0d: [mem 0x00000000-0x0009ffff]
    [ 0.142698] pnp 00:0d: [mem 0x00100000-0x3ffeffff]
    [ 0.142701] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [ 0.142703] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
    [ 0.142705] pnp 00:0d: [mem 0xfefff000-0xfeffffff]
    [ 0.142707] pnp 00:0d: [mem 0xfff80000-0xfff80fff]
    [ 0.142710] pnp 00:0d: [mem 0xfff90000-0xfffbffff]
    [ 0.142712] pnp 00:0d: [mem 0xfffed000-0xfffeffff]
    [ 0.142780] system 00:0d: [mem 0x000d9000-0x000dbfff] has been reserved
    [ 0.142783] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.142786] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.142789] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.142792] system 00:0d: [mem 0x3fff0000-0x3fffffff] could not be reserved
    [ 0.142796] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.142799] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.142802] system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
    [ 0.142805] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.142808] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.142812] system 00:0d: [mem 0xfefff000-0xfeffffff] could not be reserved
    [ 0.142815] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.142818] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.142821] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.142825] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.142834] pnp: PnP ACPI: found 14 devices
    [ 0.142836] ACPI: ACPI bus type pnp unregistered
    [ 0.179268] Switching to clocksource acpi_pm
    [ 0.179290] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.179311] pci 0000:00:09.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
    [ 0.179316] pci 0000:05:0a.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
    [ 0.179319] pci 0000:05:0c.0: BAR 6: assigned [mem 0x40080000-0x4009ffff pref]
    [ 0.179323] pci 0000:00:09.0: PCI bridge to [bus 05-05]
    [ 0.179326] pci 0000:00:09.0: bridge window [io 0x9000-0xafff]
    [ 0.179329] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
    [ 0.179333] pci 0000:00:09.0: bridge window [mem 0x40000000-0x400fffff pref]
    [ 0.179337] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
    [ 0.179342] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
    [ 0.179347] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
    [ 0.179353] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd201ffff pref]
    [ 0.179356] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
    [ 0.179359] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
    [ 0.179363] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.179371] pci 0000:00:09.0: setting latency timer to 64
    [ 0.179381] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.179383] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
    [ 0.179386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.179389] pci_bus 0000:05: resource 0 [io 0x9000-0xafff]
    [ 0.179392] pci_bus 0000:05: resource 1 [mem 0xd3000000-0xd4ffffff]
    [ 0.179395] pci_bus 0000:05: resource 2 [mem 0x40000000-0x400fffff pref]
    [ 0.179398] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
    [ 0.179400] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
    [ 0.179403] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.179407] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
    [ 0.179409] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.179448] NET: Registered protocol family 2
    [ 0.179507] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.179755] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.179755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.179755] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.179755] TCP reno registered
    [ 0.179755] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.179755] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.179755] NET: Registered protocol family 1
    [ 0.179755] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.246787] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [ 0.246848] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246854] pci 0000:00:0b.0: Found disabled HT MSI Mapping
    [ 0.246861] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246866] pci 0000:00:0b.0: Linking AER extended capability
    [ 0.246900] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246906] pci 0000:00:0c.0: Found disabled HT MSI Mapping
    [ 0.246913] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246916] pci 0000:00:0c.0: Linking AER extended capability
    [ 0.246953] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246959] pci 0000:00:0d.0: Found disabled HT MSI Mapping
    [ 0.246966] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246969] pci 0000:00:0d.0: Linking AER extended capability
    [ 0.247010] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.247015] pci 0000:00:0e.0: Found disabled HT MSI Mapping
    [ 0.247022] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.247025] pci 0000:00:0e.0: Linking AER extended capability
    [ 0.247045] pci 0000:01:00.0: Boot video device
    [ 0.247048] PCI: CLS 32 bytes, default 64
    [ 0.247104] Unpacking initramfs...
    [ 0.317791] Freeing initrd memory: 2848k freed
    [ 0.319628] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.319631] apm: overridden by ACPI.
    [ 0.319848] audit: initializing netlink socket (disabled)
    [ 0.319861] type=2000 audit(1338126992.316:1): initialized
    [ 0.320176] highmem bounce pool size: 64 pages
    [ 0.320181] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.322161] VFS: Disk quotas dquot_6.5.2
    [ 0.322222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.322310] msgmni has been set to 1740
    [ 0.322474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.322510] io scheduler noop registered
    [ 0.322512] io scheduler deadline registered
    [ 0.322518] io scheduler cfq registered (default)
    [ 0.322633] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
    [ 0.322689] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
    [ 0.322745] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
    [ 0.322794] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
    [ 0.322982] GHES: HEST is not enabled!
    [ 0.322995] isapnp: Scanning for PnP cards...
    [ 0.678365] isapnp: No Plug & Play device found
    [ 0.678420] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698839] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.719501] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.719786] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.970407] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.970501] mousedev: PS/2 mouse device common for all mice
    [ 0.970574] rtc_cmos 00:04: RTC can wake from S4
    [ 0.970673] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.970693] rtc0: alarms up to one year, y3k, 242 bytes nvram
    [ 0.970715] cpuidle: using governor ladder
    [ 0.970717] cpuidle: using governor menu
    [ 0.970929] TCP cubic registered
    [ 0.971059] NET: Registered protocol family 10
    [ 0.971516] NET: Registered protocol family 17
    [ 0.971522] Registering the dns_resolver key type
    [ 0.971541] Using IPI No-Shortcut mode
    [ 0.971626] PM: Hibernation image not present or could not be loaded.
    [ 0.971635] registered taskstats version 1
    [ 0.971980] rtc_cmos 00:04: setting system clock to 2012-05-27 13:56:33 UTC (1338126993)
    [ 0.972030] Initializing network drop monitor service
    [ 0.972083] Freeing unused kernel memory: 520k freed
    [ 0.972380] Write protecting the kernel text: 3776k
    [ 0.972401] Write protecting the kernel read-only data: 1112k
    [ 0.983214] udevd[32]: starting version 182
    [ 1.036424] usbcore: registered new interface driver usbfs
    [ 1.036449] usbcore: registered new interface driver hub
    [ 1.040374] SCSI subsystem initialized
    [ 1.041939] usbcore: registered new device driver usb
    [ 1.042240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.042288] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [ 1.042292] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [ 1.042319] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    [ 1.042343] ehci_hcd 0000:00:02.1: debug port 1
    [ 1.042349] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
    [ 1.042367] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd5005000
    [ 1.043072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.046296] libata version 3.00 loaded.
    [ 1.048421] sata_sil 0000:05:0a.0: version 2.4
    [ 1.048533] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 1.048566] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
    [ 1.050034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [ 1.050191] hub 1-0:1.0: USB hub found
    [ 1.050196] hub 1-0:1.0: 10 ports detected
    [ 1.050413] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 1.050416] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 1.050426] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    [ 1.050448] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd5004000
    [ 1.052061] scsi0 : sata_sil
    [ 1.055247] scsi1 : sata_sil
    [ 1.058388] scsi2 : sata_sil
    [ 1.061600] scsi3 : sata_sil
    [ 1.061664] ata1: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a080 irq 19
    [ 1.061668] ata2: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a0c0 irq 19
    [ 1.061671] ata3: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a280 irq 19
    [ 1.061675] ata4: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a2c0 irq 19
    [ 1.105505] hub 2-0:1.0: USB hub found
    [ 1.105512] hub 2-0:1.0: 10 ports detected
    [ 1.105590] sata_nv 0000:00:07.0: version 3.5
    [ 1.105767] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [ 1.105822] sata_nv 0000:00:07.0: setting latency timer to 64
    [ 1.106449] scsi4 : sata_nv
    [ 1.106566] scsi5 : sata_nv
    [ 1.106702] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
    [ 1.106706] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
    [ 1.106854] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [ 1.106899] sata_nv 0000:00:08.0: setting latency timer to 64
    [ 1.107330] scsi6 : sata_nv
    [ 1.107449] scsi7 : sata_nv
    [ 1.107557] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
    [ 1.107560] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
    [ 1.107616] pata_amd 0000:00:06.0: version 0.4.1
    [ 1.107645] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 1.108469] scsi8 : pata_amd
    [ 1.108594] scsi9 : pata_amd
    [ 1.109000] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 1.109003] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 1.330027] Refined TSC clocksource calibration: 2211.331 MHz.
    [ 1.330032] Switching to clocksource tsc
    [ 1.373866] ata9.00: ATAPI: SONY DVD-ROM DDU1613, 9YS2, max UDMA/33
    [ 1.373872] ata9.01: ATAPI: SONY DVD RW DW-D22A, BYS2, max UDMA/66
    [ 1.373879] ata9: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c50000) ACPI=0x701f (60:30:0x1f)
    [ 1.373884] ata9: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c50000) ACPI=0x1f01f (60:30:0x1f)
    [ 1.374258] ata9.00: configured for UDMA/33
    [ 1.383354] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 1.386828] ata9.01: configured for UDMA/66
    [ 1.397081] ata1.00: ATA-6: HDS722525VLSA80, V36OA6MA, max UDMA/100
    [ 1.397084] ata1.00: 488397168 sectors, multi 16: LBA48
    [ 1.417086] ata1.00: configured for UDMA/100
    [ 1.417191] scsi 0:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5
    [ 1.420013] ata7: SATA link down (SStatus 0 SControl 300)
    [ 1.420027] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.736680] ata2: SATA link down (SStatus 0 SControl 310)
    [ 1.743343] usb 2-3: new low-speed USB device number 2 using ohci_hcd
    [ 2.056681] ata3: SATA link down (SStatus 0 SControl 310)
    [ 2.220006] usb 2-4: new full-speed USB device number 3 using ohci_hcd
    [ 2.376680] ata4: SATA link down (SStatus 0 SControl 310)
    [ 2.419383] hub 2-4:1.0: USB hub found
    [ 2.422367] hub 2-4:1.0: 2 ports detected
    [ 2.690007] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.713340] usb 2-10: new low-speed USB device number 4 using ohci_hcd
    [ 3.003340] ata8: SATA link down (SStatus 0 SControl 300)
    [ 3.003821] scsi 8:0:0:0: CD-ROM SONY DVD-ROM DDU1613 9YS2 PQ: 0 ANSI: 5
    [ 3.004807] scsi 8:0:1:0: CD-ROM SONY DVD RW DW-D22A BYS2 PQ: 0 ANSI: 5
    [ 3.192270] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 3.192313] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.192316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.192335] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.203925] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input0
    [ 3.204011] generic-usb 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:02.0-3/input0
    [ 3.204121] usbcore: registered new interface driver usbhid
    [ 3.204123] usbhid: USB HID core driver
    [ 3.206210] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
    [ 3.206215] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.206408] sr 8:0:0:0: Attached scsi CD-ROM sr0
    [ 3.207374] sda: sda1 sda2 sda3 sda4
    [ 3.207725] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.209438] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 3.209644] sr 8:0:1:0: Attached scsi CD-ROM sr1
    [ 3.219118] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input1
    [ 3.219720] logitech 0003:046D:C50C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-10/input0
    [ 3.228377] logitech 0003:046D:C50C.0003: fixing up Logitech keyboard report descriptor
    [ 3.231342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.1/input/input2
    [ 3.232510] logitech 0003:046D:C50C.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-10/input1
    [ 3.668390] usb 2-4.1: new low-speed USB device number 5 using ohci_hcd
    [ 3.790466] input: Logitech Desktop USB stand as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input3
    [ 3.790664] generic-usb 0003:046D:ABD0.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [Logitech Desktop USB stand] on usb-0000:00:02.0-4.1/input0
    [ 4.738194] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.853738] udevd[230]: starting version 182
    [ 6.424070] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.424074] ACPI: Thermal Zone [THRM] (40 C)
    [ 6.424756] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 6.424762] ACPI: Power Button [PWRB]
    [ 6.424829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.424833] ACPI: Power Button [PWRF]
    [ 6.531468] ACPI: Fan [FAN] (on)
    [ 6.557938] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 59659kHz
    [ 6.563497] IT8712 SuperIO detected.
    [ 6.563716] parport_pc 00:09: reported by Plug and Play ACPI
    [ 6.563763] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 6.567244] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.607796] ppdev: user-space parallel port driver
    [ 6.624664] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    [ 6.676743] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [ 6.677042] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [ 6.677091] skge: 1.14 addr 0xd4004000 irq 17 chip Yukon-Lite rev 7
    [ 6.677584] skge 0000:05:0c.0: eth0: addr 00:11:d8:37:b2:f9
    [ 6.699836] Floppy drive(s): fd0 is 1.44M
    [ 6.716478] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [ 6.716637] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
    [ 6.716644] forcedeth 0000:00:0a.0: setting latency timer to 64
    [ 6.717736] FDC 0 is a post-1991 82077
    [ 6.749918] Linux agpgart interface v0.103
    [ 7.086279] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
    [ 7.086285] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
    [ 7.086290] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
    [ 7.086294] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
    [ 7.086299] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
    [ 7.086303] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
    [ 7.089653] ssb: Sonics Silicon Backplane found on PCI device 0000:05:07.0
    [ 7.126862] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.176776] firewire_core: created device fw0: GUID 0011d8000000678b, S400
    [ 7.240821] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:11:d8:37:a7:42
    [ 7.240826] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
    [ 7.241088] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
    [ 7.241114] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
    [ 7.241405] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
    [ 7.241428] snd_intel8x0 0000:00:04.0: setting latency timer to 64
    [ 7.386441] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
    [ 7.560025] intel8x0_measure_ac97_clock: measured 50564 usecs (2488 samples)
    [ 7.560029] intel8x0: clocking to 46825
    [ 7.622698] nvidia: module license 'NVIDIA' taints kernel.
    [ 7.622702] Disabling lock debugging due to kernel taint
    [ 7.654334] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    [ 7.654357] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 7.654955] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.49 Mon Apr 30 23:30:07 PDT 2012
    [ 7.657409] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 7.657999] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
    [ 9.880314] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 9.992201] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 9.993651] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 10.094819] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.171043] Adding 4096568k swap on /dev/sda2. Priority:-1 extents:1 across:4096568k
    [ 12.706681] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
    [ 12.774910] Registered led device: b43legacy-phy0::tx
    [ 12.775228] Registered led device: b43legacy-phy0::rx
    [ 12.775546] Registered led device: b43legacy-phy0::radio
    [ 12.800241] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 12.807335] skge 0000:05:0c.0: eth0: enabling interface
    [ 12.812861] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 12.818147] forcedeth 0000:00:0a.0: eth1: no link during initialization
    [ 12.818697] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 16.030022] wlan0: authenticate with bc:ae:c5:c3:4c:e3 (try 1)
    [ 16.033527] wlan0: authenticated
    [ 16.066683] wlan0: associate with bc:ae:c5:c3:4c:e3 (try 1)
    [ 16.068994] wlan0: RX AssocResp from bc:ae:c5:c3:4c:e3 (capab=0x411 status=0 aid=6)
    [ 16.068997] wlan0: associated
    [ 16.069001] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 1
    [ 16.069003] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 2
    [ 16.080313] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.157459] Intel AES-NI instructions are not detected.
    [ 16.164801] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 3
    [ 24.111561] EXT4-fs (sda3): re-mounted. Opts: commit=0
    [ 24.268251] EXT4-fs (sda4): re-mounted. Opts: commit=0
    [ 27.110004] wlan0: no IPv6 routers present
    [ 43.360438] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
    Everything.log snippet (right before freeze #1):
    May 12 12:21:01 localhost -- MARK --
    May 12 12:41:01 localhost -- MARK --
    May 12 13:01:01 localhost /USR/SBIN/CROND[4753]: (root) CMD (run-parts /etc/cron.hourly)
    May 12 13:16:28 localhost kernel: [76481.010966] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
    May 12 13:18:57 localhost kernel: [76629.990174] emerald-theme-m[4784]: segfault at 18 ip b7336935 sp bfada630 error 4 in libgtk-x11-2.0.so.0.2400.10[b728d000+454000]
    May 12 13:19:22 localhost kernel: [76655.367954] emerald-theme-m[4797]: segfault at 18 ip b7328935 sp bf8ecb20 error 4 in libgtk-x11-2.0.so.0.2400.10[b727f000+454000]
    May 12 13:19:37 localhost kernel: [76669.865753] emerald-theme-m[4806]: segfault at 18 ip b7367935 sp bf9c1c70 error 4 in libgtk-x11-2.0.so.0.2400.10[b72be000+454000]
    May 12 13:20:00 localhost kernel: [76692.879466] emerald-theme-m[4815]: segfault at 18 ip b73c0935 sp bfe15100 error 4 in libgtk-x11-2.0.so.0.2400.10[b7317000+454000]
    May 12 13:20:14 localhost kernel: [76707.084110] emerald-theme-m[4824]: segfault at 18 ip b736a935 sp bf983520 error 4 in libgtk-x11-2.0.so.0.2400.10[b72c1000+454000]
    May 12 13:20:14 localhost kernel: [76707.085552] BUG: unable to handle kernel NULL pointer dereference at 00000090
    May 12 13:20:14 localhost kernel: [76707.085558] IP: [<c01f1445>] shmem_find_get_pages_and_swap+0x65/0xf0
    May 12 13:20:14 localhost kernel: [76707.085566] *pde = 00000000
    May 12 13:20:14 localhost kernel: [76707.085570] Oops: 0000 [#1] PREEMPT SMP
    May 12 13:20:14 localhost kernel: [76707.085573] Modules linked in: fuse aes_i586 cryptd aes_generic snd_cs4236 snd_mpu401 nvidia(PO) arc4 b43legacy mac80211 cfg80211 rfkill snd_wavefront snd_intel8x0 snd_wss_lib snd_mpu401_uart snd_ac97_codec snd_rawmidi ac97_bus snd_pcm snd_opl3_lib snd_hwdep snd_page_alloc snd_timer snd_seq_device snd soundcore firewire_ohci ssb ns558 gameport agpgart firewire_core ppdev pcmcia skge mmc_core forcedeth serio_raw processor fan pcspkr i2c_nforce2 parport_pc floppy i2c_core asus_atk0110 button thermal pcmcia_core parport joydev evdev crc_itu_t k8temp ext4 crc16 jbd2 mbcache hid_logitech ff_memless sr_mod cdrom usbhid hid sd_mod pata_acpi sata_sil pata_amd ata_generic sata_nv ohci_hcd ehci_hcd libata scsi_mod usbcore usb_common
    May 12 13:20:14 localhost kernel: [76707.085618]
    May 12 13:20:14 localhost kernel: [76707.085621] Pid: 622, comm: Xorg Tainted: P O 3.3.5-1-ARCH #1 Magnell System name/A8N-SLI DELUXE
    May 12 13:20:14 localhost kernel: [76707.085626] EIP: 0060:[<c01f1445>] EFLAGS: 00013246 CPU: 0
    May 12 13:20:14 localhost kernel: [76707.085629] EIP is at shmem_find_get_pages_and_swap+0x65/0xf0
    May 12 13:20:14 localhost kernel: [76707.085632] EAX: f524387c EBX: 00000002 ECX: 00000001 EDX: 00000080
    May 12 13:20:14 localhost kernel: [76707.085634] ESI: f443fde0 EDI: f443fe28 EBP: f443fda4 ESP: f443fd74
    May 12 13:20:14 localhost kernel: [76707.085637] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    May 12 13:20:14 localhost kernel: [76707.085640] Process Xorg (pid: 622, ti=f443e000 task=f5b124c0 task.ti=f443e000)
    May 12 13:20:14 localhost kernel: [76707.085642] Stack:
    May 12 13:20:14 localhost kernel: [76707.085643] 0000003e 0000000e 00000001 dca13574 0000000e 0000003e 00000003 00000002
    May 12 13:20:14 localhost kernel: [76707.085649] 00000002 0000003e f443fde0 f443fe58 f443fe64 c01f2d98 f443fe20 f443fde0
    May 12 13:20:14 localhost kernel: [76707.085654] f443fe9c f6f2a180 00000000 dca134a0 00000000 f443fe20 00000000 00000000
    May 12 13:20:14 localhost kernel: [76707.085659] Call Trace:
    May 12 13:20:14 localhost kernel: [76707.085664] [<c01f2d98>] shmem_truncate_range+0xe8/0x4f0
    May 12 13:20:14 localhost kernel: [76707.085668] [<c01f33bc>] shmem_evict_inode+0xac/0x120
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0240e0e>] evict+0x8e/0x170
    May 12 13:20:14 localhost kernel: [76707.085669] [<c02412db>] iput+0xcb/0x1b0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c023de57>] d_kill+0xa7/0xf0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c023e461>] dput+0xc1/0x170
    May 12 13:20:14 localhost kernel: [76707.085669] [<c022b908>] fput+0x128/0x1d0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0200eab>] remove_vma+0x2b/0x60
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0201e8a>] do_munmap+0x15a/0x2c0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c02906fb>] sys_shmdt+0x9b/0x140
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0290ae3>] sys_ipc+0x223/0x280
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0152ca8>] ? sys_clock_gettime+0x48/0x70
    May 12 13:20:14 localhost kernel: [76707.085669] [<c04ae79f>] sysenter_do_call+0x12/0x28
    May 12 13:20:14 localhost kernel: [76707.085669] Code: 24 e8 70 d7 0e 00 85 c0 89 45 e8 0f 84 8e 00 00 00 8b 7d 08 31 db c7 45 ec 00 00 00 00 90 8b 07 8b 10 85 d2 74 3d f6 c2 03 75 5e <8b> 4a 10 89 5d d8 85 c9 74 61 8d 59 01 89 c8 89 5d f0 3e 0f b1
    May 12 13:20:14 localhost kernel: [76707.085669] EIP: [<c01f1445>] shmem_find_get_pages_and_swap+0x65/0xf0 SS:ESP 0068:f443fd74
    May 12 13:20:14 localhost kernel: [76707.085669] CR2: 0000000000000090
    May 12 13:20:14 localhost kernel: [76707.085769] ---[ end trace 2165add98098eec7 ]---
    May 12 13:20:34 localhost kernel: [76726.967091] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:34 localhost kernel: [76727.311089] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:35 localhost kernel: [76727.543078] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:46 localhost kernel: [76738.927100] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:46 localhost kernel: [76739.191099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:46 localhost kernel: [76739.399099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:47 localhost kernel: [76739.631099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:47 localhost kernel: [76739.847099] SysRq : HMay 12 13:22:02 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    May 12 13:22:02 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    May 12 13:22:02 localhost kernel: [ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    May 12 13:22:02 localhost syslog-ng[443]: syslog-ng starting up; version='3.3.5'
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    May 12 13:22:02 localhost kernel: [ 0.000000] DMI 2.3 present.
    May 12 13:22:02 localhost kernel: [ 0.000000] DMI: Magnell System name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE ACPI BIOS Revision 1002 11/26/2004
    Everything.log #2 (before freeze #2)
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmManager: ending phase EXIT
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): Unreffing manager
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmManager: disposing manager
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Unreffing object: 0xa09dc18
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Unreffing object: 0xa09dc90
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
    May 25 14:32:20 localhost gdm-simple-slave[625]: WARNING: Child process 733 was already dead.
    May 25 18:32:22 localhost rtkit-daemon[797]: Successfully made thread 905 of process 905 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
    May 25 18:32:22 localhost rtkit-daemon[797]: Supervising 4 threads of 2 processes of 2 users.
    May 25 14:32:22 lo

    My thought process was followed similar lines. 
    I have kept track of what has been going when freezes occur and there does not seem to be any pattern to running programs at the time of the crashes.   
    I have let memtest (from the arch installation cd) run for over 10 hours and it does not detect any memory problems.
    I have considered hard drive problems as well.  I ran Steve Gibson's SpinRite software on the hard disk on every level it has including dynastat.  SpinRite can not detect a single problem with the surface of the disk or the way data is read from it. 
    As far as temp goes it does not feel overly hot when the system freezes but I suppose that it is possible.  I am not sure how to set up monitoring for that.  I guess I could find some kind of gui or command line tool that runs in a loop and outputs temp info to a file that I could review after a crash.  I'll try that but my gut says that it is going to be something else. 
    There are seg faults and other messages in the logs and command output that I have attached above that look suspicious to me but unfortunately I don't know enough to make use of them.  Google does not seem to be shedding any light on the situation for me either.  Is there anything in there that should be sticking out at me?
    Thanks for taking the time to read my post and for replying.  Also, thanks in advance to anyone who takes the time to post a follow up.  I appreciate the help.

  • [Solved] Catalyst + Minecraft: system freeze.

    Hi everyone,
    I bought a new graphics card: the ATI HD 7750 (7700 Series, Cape Verde) and installed catalyst-total from the [catalyst] repo, because the 3D performance with xf86-video-ati-git was incredible poor. I wasn't even able to scroll in chromium with this.
    Now with proprietary fglrx everything performs buttery smooth, except I get severe troubles running 3D games.
    The only one I'd miss very much is Minecraft, but also there I always encounter a system freeze after 5 seconds. Only S-Abf + B can help me get out of there, I cannot switch to tty1-6 to fix this issue.
    Here's my Xorg.0.log
    [ 15.054]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 15.054] X Protocol Version 11, Revision 0
    [ 15.054] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 15.054] Current Operating System: Linux hubert 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
    [ 15.054] Kernel command line: locale=de_DE.UTF-8 lang=de cryptdevice=/dev/sda2:vgroup root=/dev/mapper/vgroup-root nomodeset ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 15.054] Build Date: 27 August 2012 08:04:39AM
    [ 15.054]
    [ 15.054] Current version of pixman: 0.26.2
    [ 15.054] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 15.054] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.054] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 11:22:33 2012
    [ 15.056] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.056] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.058] (==) ServerLayout "aticonfig Layout"
    [ 15.058] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 15.058] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 15.060] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 15.060] (==) Automatically adding devices
    [ 15.060] (==) Automatically enabling devices
    [ 15.062] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.063] Entry deleted from font path.
    [ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.065] Entry deleted from font path.
    [ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.065] Entry deleted from font path.
    [ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.065] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 15.065] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.065] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 15.065] (II) Loader magic: 0x7c8b00
    [ 15.065] (II) Module ABI versions:
    [ 15.065] X.Org ANSI C Emulation: 0.4
    [ 15.065] X.Org Video Driver: 12.1
    [ 15.065] X.Org XInput driver : 16.0
    [ 15.065] X.Org Server Extension : 6.0
    [ 15.067] (--) PCI:*(0:1:0:0) 1002:683f:174b:e213 rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [ 15.067] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.067] (II) "extmod" will be loaded by default.
    [ 15.067] (II) "dbe" will be loaded by default.
    [ 15.067] (II) "glx" will be loaded by default.
    [ 15.067] (II) "record" will be loaded by default.
    [ 15.067] (II) "dri" will be loaded by default.
    [ 15.067] (II) "dri2" will be loaded by default.
    [ 15.067] (II) LoadModule: "extmod"
    [ 15.073] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.076] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.076] compiled for 1.12.4, module version = 1.0.0
    [ 15.076] Module class: X.Org Server Extension
    [ 15.076] ABI class: X.Org Server Extension, version 6.0
    [ 15.076] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.076] (II) Loading extension XFree86-VidModeExtension
    [ 15.076] (II) Loading extension XFree86-DGA
    [ 15.076] (II) Loading extension DPMS
    [ 15.076] (II) Loading extension XVideo
    [ 15.076] (II) Loading extension XVideo-MotionCompensation
    [ 15.076] (II) Loading extension X-Resource
    [ 15.076] (II) LoadModule: "dbe"
    [ 15.076] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.078] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.078] compiled for 1.12.4, module version = 1.0.0
    [ 15.078] Module class: X.Org Server Extension
    [ 15.078] ABI class: X.Org Server Extension, version 6.0
    [ 15.078] (II) Loading extension DOUBLE-BUFFER
    [ 15.078] (II) LoadModule: "glx"
    [ 15.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 15.088] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 15.088] compiled for 6.9.0, module version = 1.0.0
    [ 15.088] (II) Loading extension GLX
    [ 15.088] (II) LoadModule: "record"
    [ 15.088] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 15.090] (II) Module record: vendor="X.Org Foundation"
    [ 15.090] compiled for 1.12.4, module version = 1.13.0
    [ 15.090] Module class: X.Org Server Extension
    [ 15.090] ABI class: X.Org Server Extension, version 6.0
    [ 15.090] (II) Loading extension RECORD
    [ 15.090] (II) LoadModule: "dri"
    [ 15.090] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 15.095] (II) Module dri: vendor="X.Org Foundation"
    [ 15.095] compiled for 1.12.4, module version = 1.0.0
    [ 15.095] ABI class: X.Org Server Extension, version 6.0
    [ 15.095] (II) Loading extension XFree86-DRI
    [ 15.095] (II) LoadModule: "dri2"
    [ 15.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 15.097] (II) Module dri2: vendor="X.Org Foundation"
    [ 15.097] compiled for 1.12.4, module version = 1.2.0
    [ 15.097] ABI class: X.Org Server Extension, version 6.0
    [ 15.097] (II) Loading extension DRI2
    [ 15.097] (II) LoadModule: "fglrx"
    [ 15.101] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 15.229] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 15.229] compiled for 1.4.99.906, module version = 8.98.2
    [ 15.229] Module class: X.Org Video Driver
    [ 15.230] (II) Loading sub module "fglrxdrm"
    [ 15.230] (II) LoadModule: "fglrxdrm"
    [ 15.230] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 15.234] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 15.234] compiled for 1.4.99.906, module version = 8.98.2
    [ 15.234] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
    [ 15.234] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
    [ 15.234] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
    [ 15.234] (++) using VT number 7
    [ 15.236] (WW) Falling back to old probe method for fglrx
    [ 15.269] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 15.276] (--) Chipset Supported AMD Graphics Processor (0x683F) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 15.282] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 15.283] (II) AMD Video driver is signed
    [ 15.283] (II) fglrx(0): pEnt->device->identifier=0xb0c260
    [ 15.283] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    [ 15.284] (II) Loading sub module "vgahw"
    [ 15.284] (II) LoadModule: "vgahw"
    [ 15.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 15.286] (II) Module vgahw: vendor="X.Org Foundation"
    [ 15.286] compiled for 1.12.4, module version = 0.1.0
    [ 15.286] ABI class: X.Org Video Driver, version 12.1
    [ 15.286] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 15.286] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 15.286] (==) fglrx(0): Default visual is TrueColor
    [ 15.286] (**) fglrx(0): Option "DPMS" "true"
    [ 15.286] (==) fglrx(0): RGB weight 888
    [ 15.286] (II) fglrx(0): Using 8 bits per RGB
    [ 15.287] (==) fglrx(0): Buffer Tiling is ON
    [ 15.289] (II) Loading sub module "fglrxdrm"
    [ 15.289] (II) LoadModule: "fglrxdrm"
    [ 15.290] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 15.290] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 15.290] compiled for 1.4.99.906, module version = 8.98.2
    [ 15.293] ukiDynamicMajor: found major device number 250
    [ 15.293] ukiDynamicMajor: found major device number 250
    [ 15.293] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 15.293] ukiOpenDevice: node name is /dev/ati/card0
    [ 15.293] ukiOpenDevice: open result is 11, (OK)
    [ 15.293] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 15.293] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 15.294] (**) fglrx(0): NoAccel = NO
    [ 15.294] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 15.294] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series " (Chipset = 0x683f)
    [ 15.294] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe213)
    [ 15.294] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 15.294] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    [ 15.294] (--) fglrx(0): MMIO registers at 0xfeac0000
    [ 15.294] (--) fglrx(0): I/O port at 0x0000d000
    [ 15.294] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 15.323] (II) fglrx(0): AC Adapter is used
    [ 15.346] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 15.462] (II) Loading sub module "vbe"
    [ 15.462] (II) LoadModule: "vbe"
    [ 15.462] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 15.464] (II) Module vbe: vendor="X.Org Foundation"
    [ 15.464] compiled for 1.12.4, module version = 1.1.0
    [ 15.464] ABI class: X.Org Video Driver, version 12.1
    [ 15.467] (II) fglrx(0): VESA BIOS detected
    [ 15.467] (II) fglrx(0): VESA VBE Version 3.0
    [ 15.467] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 15.467] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 15.467] (II) fglrx(0): VESA VBE OEM Software Rev: 15.14
    [ 15.467] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 15.467] (II) fglrx(0): VESA VBE OEM Product: VERDE
    [ 15.467] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 15.475] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 15.475] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
    [ 15.475] (II) fglrx(0): PCIE card detected
    [ 15.475] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 15.475] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 15.479] (II) fglrx(0): Using adapter: 1:0.0.
    [ 15.489] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
    [ 15.496] (II) fglrx(0): Interrupt handler installed at IRQ 44.
    [ 15.496] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 15.496] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 15.496] (==) fglrx(0): Center Mode is disabled
    [ 15.496] (II) Loading sub module "fb"
    [ 15.496] (II) LoadModule: "fb"
    [ 15.496] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 15.501] (II) Module fb: vendor="X.Org Foundation"
    [ 15.501] compiled for 1.12.4, module version = 1.0.0
    [ 15.501] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 15.501] (II) Loading sub module "ddc"
    [ 15.501] (II) LoadModule: "ddc"
    [ 15.501] (II) Module "ddc" already built-in
    [ 15.652] (II) fglrx(0): Finished Initialize PPLIB!
    [ 15.658] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 15.658] (II) fglrx(0): Output DFP2 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP3 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP4 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP5 has no monitor section
    [ 15.658] (II) fglrx(0): Output DFP6 has no monitor section
    [ 15.658] (II) fglrx(0): Output CRT1 has no monitor section
    [ 15.658] (II) Loading sub module "ddc"
    [ 15.658] (II) LoadModule: "ddc"
    [ 15.658] (II) Module "ddc" already built-in
    [ 15.658] (II) fglrx(0): Connected Display0: DFP6
    [ 15.658] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 15.658] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
    [ 15.658] (II) fglrx(0): Year: 2010 Week: 16
    [ 15.658] (II) fglrx(0): EDID Version: 1.3
    [ 15.658] (II) fglrx(0): Digital Display Input
    [ 15.658] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
    [ 15.658] (II) fglrx(0): Gamma: 2.20
    [ 15.658] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    [ 15.658] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 15.659] (II) fglrx(0): First detailed timing is preferred mode
    [ 15.659] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 15.659] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 15.659] (II) fglrx(0): Supported established timings:
    [ 15.659] (II) fglrx(0): 720x400@70Hz
    [ 15.659] (II) fglrx(0): 640x480@60Hz
    [ 15.659] (II) fglrx(0): 800x600@60Hz
    [ 15.659] (II) fglrx(0): 1024x768@60Hz
    [ 15.659] (II) fglrx(0): Manufacturer's mask: 0
    [ 15.659] (II) fglrx(0): Supported standard timings:
    [ 15.659] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 15.659] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 15.659] (II) fglrx(0): Supported detailed timing:
    [ 15.659] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
    [ 15.659] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 15.659] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 15.659] (II) fglrx(0): Serial No: 98458040
    [ 15.659] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
    [ 15.659] (II) fglrx(0): Monitor name: S2202W
    [ 15.659] (II) fglrx(0): EDID (in hex):
    [ 15.659] (II) fglrx(0): 00ffffffffffff0015c3751901010101
    [ 15.659] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
    [ 15.659] (II) fglrx(0): 0f5054a1080081808140010101010101
    [ 15.659] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
    [ 15.659] (II) fglrx(0): 3600da291100001a000000ff00393834
    [ 15.659] (II) fglrx(0): 35383034300a20202020000000fd003b
    [ 15.659] (II) fglrx(0): 3d1f410c000a202020202020000000fc
    [ 15.659] (II) fglrx(0): 005332323032570a202020202020001f
    [ 15.659] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 15.660] (II) fglrx(0): EDID for output DFP1
    [ 15.660] (II) fglrx(0): EDID for output DFP2
    [ 15.660] (II) fglrx(0): EDID for output DFP3
    [ 15.660] (II) fglrx(0): EDID for output DFP4
    [ 15.660] (II) fglrx(0): EDID for output DFP5
    [ 15.660] (II) fglrx(0): EDID for output DFP6
    [ 15.660] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
    [ 15.660] (II) fglrx(0): Year: 2010 Week: 16
    [ 15.660] (II) fglrx(0): EDID Version: 1.3
    [ 15.660] (II) fglrx(0): Digital Display Input
    [ 15.660] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
    [ 15.660] (II) fglrx(0): Gamma: 2.20
    [ 15.660] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    [ 15.660] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 15.660] (II) fglrx(0): First detailed timing is preferred mode
    [ 15.660] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 15.660] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 15.660] (II) fglrx(0): Supported established timings:
    [ 15.660] (II) fglrx(0): 720x400@70Hz
    [ 15.660] (II) fglrx(0): 640x480@60Hz
    [ 15.660] (II) fglrx(0): 800x600@60Hz
    [ 15.660] (II) fglrx(0): 1024x768@60Hz
    [ 15.660] (II) fglrx(0): Manufacturer's mask: 0
    [ 15.660] (II) fglrx(0): Supported standard timings:
    [ 15.660] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 15.660] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 15.660] (II) fglrx(0): Supported detailed timing:
    [ 15.660] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
    [ 15.660] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 15.660] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 15.660] (II) fglrx(0): Serial No: 98458040
    [ 15.660] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
    [ 15.660] (II) fglrx(0): Monitor name: S2202W
    [ 15.660] (II) fglrx(0): EDID (in hex):
    [ 15.660] (II) fglrx(0): 00ffffffffffff0015c3751901010101
    [ 15.660] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
    [ 15.660] (II) fglrx(0): 0f5054a1080081808140010101010101
    [ 15.660] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
    [ 15.660] (II) fglrx(0): 3600da291100001a000000ff00393834
    [ 15.660] (II) fglrx(0): 35383034300a20202020000000fd003b
    [ 15.660] (II) fglrx(0): 3d1f410c000a202020202020000000fc
    [ 15.660] (II) fglrx(0): 005332323032570a202020202020001f
    [ 15.660] (II) fglrx(0): Printing probed modes for output DFP6
    [ 15.660] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 15.660] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 15.660] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 15.660] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 15.660] (II) fglrx(0): EDID for output CRT1
    [ 15.660] (II) fglrx(0): Output DFP1 disconnected
    [ 15.660] (II) fglrx(0): Output DFP2 disconnected
    [ 15.660] (II) fglrx(0): Output DFP3 disconnected
    [ 15.660] (II) fglrx(0): Output DFP4 disconnected
    [ 15.660] (II) fglrx(0): Output DFP5 disconnected
    [ 15.660] (II) fglrx(0): Output DFP6 connected
    [ 15.660] (II) fglrx(0): Output CRT1 disconnected
    [ 15.660] (II) fglrx(0): Using exact sizes for initial modes
    [ 15.660] (II) fglrx(0): Output DFP6 using initial mode 1680x1050
    [ 15.661] (II) fglrx(0): DPI set to (96, 96)
    [ 15.661] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 15.661] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
    [ 15.661] (==) fglrx(0): PseudoColor visuals disabled
    [ 15.661] (II) Loading sub module "ramdac"
    [ 15.661] (II) LoadModule: "ramdac"
    [ 15.661] (II) Module "ramdac" already built-in
    [ 15.661] (==) fglrx(0): NoDRI = NO
    [ 15.661] (==) fglrx(0): Capabilities: 0x00000000
    [ 15.661] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 15.661] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 15.661] (==) fglrx(0): UseFastTLS=0
    [ 15.661] (--) Depth 24 pixmap format is 32 bpp
    [ 15.661] (II) Loading extension ATIFGLRXDRI
    [ 15.661] (II) fglrx(0): doing swlDriScreenInit
    [ 15.661] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 15.661] ukiDynamicMajor: found major device number 250
    [ 15.661] ukiDynamicMajor: found major device number 250
    [ 15.661] ukiDynamicMajor: found major device number 250
    [ 15.661] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 15.661] ukiOpenDevice: node name is /dev/ati/card0
    [ 15.661] ukiOpenDevice: open result is 12, (OK)
    [ 15.661] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 15.661] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 15.661] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 15.661] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 15.661] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 15.661] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f509aba4000
    [ 15.661] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 15.661] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 15.661] (II) fglrx(0): swlDriScreenInit done
    [ 15.661] (II) fglrx(0): Kernel Module Version Information:
    [ 15.661] (II) fglrx(0): Name: fglrx
    [ 15.661] (II) fglrx(0): Version: 8.98.2
    [ 15.661] (II) fglrx(0): Date: Jul 27 2012
    [ 15.661] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 15.661] (II) fglrx(0): Kernel Module version matches driver.
    [ 15.661] (II) fglrx(0): Kernel Module Build Time Information:
    [ 15.661] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
    [ 15.661] (II) fglrx(0): Build-Kernel MODVERSIONS: no
    [ 15.661] (II) fglrx(0): Build-Kernel __SMP__: no
    [ 15.661] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 15.662] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 15.684] (II) fglrx(0): DRI initialization successfull
    [ 15.688] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01008000
    [ 15.698] (==) fglrx(0): Backing store disabled
    [ 15.698] (II) Loading extension FGLRXEXTENSION
    [ 15.698] (**) fglrx(0): DPMS enabled
    [ 15.698] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 15.698] (**) fglrx(0): Textured Video is enabled.
    [ 15.698] (II) LoadModule: "glesx"
    [ 15.698] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 15.750] (II) Module glesx: vendor="X.Org Foundation"
    [ 15.751] compiled for 1.4.99.906, module version = 1.0.0
    [ 15.751] (II) Loading extension GLESX
    [ 15.751] (II) fglrx(0): GLESX enableFlags = 592
    [ 15.753] (II) fglrx(0): GLESX is enabled
    [ 15.753] (II) LoadModule: "amdxmm"
    [ 15.753] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 15.758] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 15.758] compiled for 1.4.99.906, module version = 2.0.0
    [ 15.773] (II) Loading extension AMDXVOPL
    [ 15.773] (II) Loading extension AMDXVBA
    [ 15.778] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 15.784] (II) fglrx(0): Enable composite support successfully
    [ 15.784] (WW) fglrx(0): Option "VendorName" is not used
    [ 15.784] (WW) fglrx(0): Option "ModelName" is not used
    [ 15.784] (II) fglrx(0): X context handle = 0x1
    [ 15.784] (II) fglrx(0): [DRI] installation complete
    [ 15.785] (==) fglrx(0): Silken mouse enabled
    [ 15.785] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 15.786] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [ 15.909] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b9e0000 width=0xa00 height=0x1900
    [ 15.909] (--) RandR disabled
    [ 15.909] (II) Initializing built-in extension Generic Event Extension
    [ 15.909] (II) Initializing built-in extension SHAPE
    [ 15.909] (II) Initializing built-in extension MIT-SHM
    [ 15.909] (II) Initializing built-in extension XInputExtension
    [ 15.909] (II) Initializing built-in extension XTEST
    [ 15.909] (II) Initializing built-in extension BIG-REQUESTS
    [ 15.909] (II) Initializing built-in extension SYNC
    [ 15.909] (II) Initializing built-in extension XKEYBOARD
    [ 15.909] (II) Initializing built-in extension XC-MISC
    [ 15.909] (II) Initializing built-in extension SECURITY
    [ 15.909] (II) Initializing built-in extension XINERAMA
    [ 15.909] (II) Initializing built-in extension XFIXES
    [ 15.909] (II) Initializing built-in extension RENDER
    [ 15.909] (II) Initializing built-in extension RANDR
    [ 15.909] (II) Initializing built-in extension COMPOSITE
    [ 15.909] (II) Initializing built-in extension DAMAGE
    [ 15.911] ukiDynamicMajor: found major device number 250
    [ 15.911] ukiDynamicMajor: found major device number 250
    [ 15.911] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 15.911] ukiOpenDevice: node name is /dev/ati/card0
    [ 15.911] ukiOpenDevice: open result is 13, (OK)
    [ 15.911] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 15.911] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 16.449] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 16.547] (II) fglrx(0): Enable the clock gating!
    [ 16.547] (II) fglrx(0): Setting screen physical size to 444 x 277
    [ 16.715] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 16.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.715] (II) LoadModule: "evdev"
    [ 16.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.719] (II) Module evdev: vendor="X.Org Foundation"
    [ 16.719] compiled for 1.12.3.901, module version = 2.7.3
    [ 16.719] Module class: X.Org XInput Driver
    [ 16.719] ABI class: X.Org XInput driver, version 16.0
    [ 16.719] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.719] (**) Power Button: always reports core events
    [ 16.720] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 16.720] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.720] (--) evdev: Power Button: Found keys
    [ 16.720] (II) evdev: Power Button: Configuring as keyboard
    [ 16.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 16.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 16.720] (**) Option "xkb_rules" "evdev"
    [ 16.720] (**) Option "xkb_model" "evdev"
    [ 16.720] (**) Option "xkb_layout" "us"
    [ 16.772] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 16.772] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.772] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.772] (**) Power Button: always reports core events
    [ 16.772] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 16.772] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.772] (--) evdev: Power Button: Found keys
    [ 16.772] (II) evdev: Power Button: Configuring as keyboard
    [ 16.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 16.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 16.772] (**) Option "xkb_rules" "evdev"
    [ 16.772] (**) Option "xkb_model" "evdev"
    [ 16.772] (**) Option "xkb_layout" "us"
    [ 16.773] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
    [ 16.773] (II) No input driver specified, ignoring this device.
    [ 16.773] (II) This device may have been added with another device file.
    [ 16.774] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
    [ 16.774] (II) No input driver specified, ignoring this device.
    [ 16.774] (II) This device may have been added with another device file.
    [ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
    [ 16.775] (II) No input driver specified, ignoring this device.
    [ 16.775] (II) This device may have been added with another device file.
    [ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
    [ 16.775] (II) No input driver specified, ignoring this device.
    [ 16.775] (II) This device may have been added with another device file.
    [ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
    [ 16.776] (II) No input driver specified, ignoring this device.
    [ 16.776] (II) This device may have been added with another device file.
    [ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
    [ 16.776] (II) No input driver specified, ignoring this device.
    [ 16.776] (II) This device may have been added with another device file.
    [ 16.776] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0)
    [ 16.776] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.776] (II) Using input driver 'evdev' for ' USB Keyboard'
    [ 16.776] (**) USB Keyboard: always reports core events
    [ 16.776] (**) evdev: USB Keyboard: Device: "/dev/input/event0"
    [ 16.776] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
    [ 16.776] (--) evdev: USB Keyboard: Found keys
    [ 16.776] (II) evdev: USB Keyboard: Configuring as keyboard
    [ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input0/event0"
    [ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8)
    [ 16.777] (**) Option "xkb_rules" "evdev"
    [ 16.777] (**) Option "xkb_model" "evdev"
    [ 16.777] (**) Option "xkb_layout" "us"
    [ 16.777] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
    [ 16.777] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 16.777] (II) Using input driver 'evdev' for ' USB Keyboard'
    [ 16.777] (**) USB Keyboard: always reports core events
    [ 16.777] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
    [ 16.777] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
    [ 16.777] (--) evdev: USB Keyboard: Found keys
    [ 16.777] (II) evdev: USB Keyboard: Configuring as keyboard
    [ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input1/event1"
    [ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9)
    [ 16.777] (**) Option "xkb_rules" "evdev"
    [ 16.777] (**) Option "xkb_model" "evdev"
    [ 16.777] (**) Option "xkb_layout" "us"
    [ 16.777] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
    [ 16.777] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 16.777] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 16.777] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 16.777] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2/event2"
    [ 16.778] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
    [ 16.778] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 16.778] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 16.778] (II) No input driver specified, ignoring this device.
    [ 16.778] (II) This device may have been added with another device file.
    [ 16.778] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event20)
    [ 16.778] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 16.778] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 16.778] (**) UVC Camera (046d:09a4): always reports core events
    [ 16.778] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event20"
    [ 16.778] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 16.778] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 16.778] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input20/event20"
    [ 16.778] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 11)
    [ 16.778] (**) Option "xkb_rules" "evdev"
    [ 16.778] (**) Option "xkb_model" "evdev"
    [ 16.778] (**) Option "xkb_layout" "us"
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event10)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event12)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event13)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.779] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
    [ 16.779] (II) No input driver specified, ignoring this device.
    [ 16.779] (II) This device may have been added with another device file.
    [ 16.780] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
    [ 16.780] (II) No input driver specified, ignoring this device.
    [ 16.780] (II) This device may have been added with another device file.
    [ 16.780] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
    [ 16.780] (II) No input driver specified, ignoring this device.
    [ 16.780] (II) This device may have been added with another device file.
    [ 16.780] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 16.780] (II) No input driver specified, ignoring this device.
    [ 16.780] (II) This device may have been added with another device file.
    [ 16.782] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 16.786] (II) fglrx(0): EDID vendor "ENC", prod id 6517
    [ 16.786] (II) fglrx(0): Using EDID range info for horizontal sync
    [ 16.786] (II) fglrx(0): Using EDID range info for vertical refresh
    [ 16.786] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 16.786] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
    [ 16.786] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 18.696] (II) fglrx(0): EDID vendor "ENC", prod id 6517
    [ 18.696] (II) fglrx(0): Using hsync ranges from config file
    [ 18.696] (II) fglrx(0): Using vrefresh ranges from config file
    [ 18.696] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 18.696] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
    [ 18.696] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 18.696] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 19.844] (II) fglrx(0): EDID vendor "ENC", prod id 6517
    [ 19.844] (II) fglrx(0): Using hsync ranges from config file
    [ 19.844] (II) fglrx(0): Using vrefresh ranges from config file
    [ 19.844] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 19.844] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
    [ 19.844] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 19.844] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    I can't see anything suspicious, hopefully someone of you knows better.
    At last my xorg.conf :
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Help and hints how to continue from here would be highly appreciated.
    EDIT: By the way, I tried lots of things from the wiki. https://wiki.archlinux.org/index.php/Catalyst.
    But there was one point I could't figure out how to implement:
    The radeonfb framebuffer drivers have been known in the past to cause problems of this nature. If your kernel has radeonfb support compiled in, you may want to try a different kernel and see if this helps.
    How can I disable radeonfb?
    EDIT2: Well, almost 2 years later the open source driver is good enough to handle Minecraft and others very easily. Closed.
    Last edited by Duxon (2014-07-10 21:31:02)

    I read the open source drivers for the Southern Island Cards have been improved, but aren't ready for 3d accelerated use yet.
    http://thread.gmane.org/gmane.comp.vide … evel/45138
    Therefore users of the 7700 series have to stick to catalyst and I still have no idea what the cause of the freeze is. Can anyone help?

  • The number pad on my wirelss keyboard has stopped working...help!

    Hi All,
    New to macs, I have a new interl-based iMac with a wireless keyboard and mouse. Yesterday the number pad stopped working. The CD eject and sound buttons still work, but the numbers themselves do not - in fact when I use them, the whole machine freezes and I can not do anything. I was playing around in the system preferences yesterday - did I click something I should not have? Or is the keyboard faulty and in need of going back to the apple store for replacing?
    I have updated the machine fully, including the latest keyboard update, but the same resulting freezing occurs when I press a number on the pad.
    Any suggestions very much appreciated.

    Sorted it - I had looked, but not found any answer through the discussions already posted. But I just found this: http://discussions.apple.com/thread.jspa?messageID=3131735&#3131735 and it has sorted it!

  • 10.8.4 and extended keyboard number pad issues

    To anyone that has heard of this before. I've checked about every discussion here and I don't know that this issue has been resolved. I recently upgraded to 10.4.8 as most here have done. The odd and annoying thing thats happened now is that my apple wireless keyboard's number pad no longer works; The number 5 key seams to have become related to a left click on the mouse wherever the curser is on the screen, but no other keys work. This problem has also crippled any web browser I use such as Safari or Firefox; meaning that if I attempt to use the number pad in a login field, the mouse can no longer select or move open windows.
    My one remedy to all of this has been to open the Force Quit Applications menu and all is well with the mouse again. One last point I can make is that by creating a new user account, all my keyboard and mouse problems go away, and everything acts as it should. I just don't want to have to back up everything and reinstall the system. So my mac faithful friends, please help.
    2GHz iMac G5   Mac OS X (10.4.8)   2 GB DDR SDRAM

    I found the answer!!!!!
    I was looking in universal access under the mouse settings and noticed something called mouse keys. Some how I turned that option on and it turned the number pad into a way of moving the curser multiple directions with the ability to select items by pressing the #5 key. I hope this may help others, I've been stuck with this one for a few days.

  • Keyboard number pad not recognized through bootcamp windows 7

    Running windows 7 through bootcamp, the number pad on my keyboard does not respond.

    I had the same thing as you (that my BT mouse & keyboard were working but then after a while they started to act up -mouse freezing on&off, keys sticking-).
    In my case the 'before' and 'after' was actually running the setup on the Bootcamp Utility disk that contains all the Bootcamp drivers. There must be a rogue driver on there that messed up my system. I ended up doing a reinstall and only installing the bluetooth drivers (that are also on the same Utlity disk, but in the $WinPEDriver$ folder. This at least worked for me.
    However, by doing so I did not get the handy Bootcamp utility in the lower left corner of Windows that allows me to conveniently reboot and switch from Win8 to MacOS. I am trying to figure out if I can install that utility separately without all the drivers being automatically installed as well

  • Number Pad locked?

    My number pad is not responding (0-9) although all =/*-+ keys work. I assume it's locked. I'm embarrassed I have to ask how to fix this.

    Make sure that you haven't acctivated mouse keys. Go to System Preferences/Universal Access/Mouse and make sure that mouse keys is off.

  • Number pad not responding

    The number pad of my Apple Keyboard on my mac mini G4 and Panther stopped working a couple days ago. It failed to respond after switching USB port, Disconnecting every other device, and buying a new keyboard didn't help either.
    Tried connecting the mini with an IBM PC keyboard, but the number pad did not respond either not did its Num Lock light. Please advice on further actions.
    Thank you!

    3968
    Welcome 5x24 to Discussions!
    Did you make sure also, about Mouse Keys?
    System Preferences > Universal Access > Mouse
    (disable the "hitting Option key five times" option too?)

  • System freezes due to hard disk problems only on Linux (not windows)

    Intro/context:
    Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
    I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
    tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
    What i've done so far:
    The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
    I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
    Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
    I found no firmware update for this hard drive.
    So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
    Info:
    Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
    Some logs i've recollected all this time:
    journalctl -xfa --system
    abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
    abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
    abr 21 13:51:24 echoes kernel: ata1: hard resetting link
    abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 13:51:24 echoes kernel: ata1: EH complete
    abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
    abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
    abr 21 14:02:01 echoes kernel: ata1: hard resetting link
    abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 14:02:01 echoes kernel: ata1: EH complete
    abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
    abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
    res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
    abr 21 14:02:01 echoes kernel: ata1: hard resetting link
    abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 14:02:01 echoes kernel: ata1: EH complete
    abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
    abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
    abr 21 14:02:01 echoes kernel: ata1: hard resetting link
    abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 14:02:01 echoes kernel: ata1: EH complete
    abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
    dmesg
    [55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
    [55661.023034] ata1.00: failed command: READ FPDMA QUEUED
    [55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [55661.023042] ata1.00: status: { DRDY }
    [55661.023046] ata1: hard resetting link
    [55666.358537] ata1: link is slow to respond, please be patient (ready=0)
    [55671.053813] ata1: COMRESET failed (errno=-16)
    [55671.053819] ata1: hard resetting link
    [55676.389438] ata1: link is slow to respond, please be patient (ready=0)
    [55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [55681.320305] ata1.00: configured for UDMA/100
    [55681.320319] ata1.00: device reported invalid CHS sector 0
    [55681.320349] ata1: EH complete
    [55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
    [55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
    dmesg
    [102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
    [102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
    [102884.890333] systemd[1]: systemd-journald.service failed.
    [102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
    [102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
    [104179.117369] ata1.00: failed command: READ FPDMA QUEUED
    [104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [104179.117377] ata1.00: status: { DRDY }
    [104179.117381] ata1: hard resetting link
    [104184.453382] ata1: link is slow to respond, please be patient (ready=0)
    [104189.149114] ata1: COMRESET failed (errno=-16)
    [104189.149121] ata1: hard resetting link
    [104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [104189.952982] ata1.00: configured for UDMA/100
    [104189.952989] ata1.00: device reported invalid CHS sector 0
    [104189.953004] ata1: EH complete
    [104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [104508.223798] ata1.00: failed command: SMART
    [104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [104508.223806] ata1.00: status: { DRDY }
    [104508.223810] ata1: hard resetting link
    [104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [104510.698126] ata1.00: configured for UDMA/100
    [104510.698157] ata1: EH complete
    One of the latest and worse
    journalctl -xfa --system
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
    res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
    abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
    abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
    abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
    abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
    abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
    abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
    abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
    abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
    abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
    abr 22 12:57:11 echoes kernel: ata1: EH complete
    abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
    abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
    abr 22 12:57:11 echoes kernel: ata1: EH complete
    Current smart status:
    smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
    Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
    === START OF INFORMATION SECTION ===
    Model Family: Toshiba 2.5" HDD MQ01ABD...
    Device Model: TOSHIBA MQ01ABD100
    Serial Number: Y44MT611T
    LU WWN Device Id: 5 000039 5e1a80e85
    Firmware Version: AX1P5E
    User Capacity: 1,000,204,886,016 bytes [1.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 5400 rpm
    Form Factor: 2.5 inches
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Sun May 3 16:42:06 2015 ART
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 120) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 234) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
    5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
    7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
    10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
    193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
    194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
    222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
    226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
    240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Vendor (0x50) Completed without error 00% 611 -
    # 2 Short offline Completed without error 00% 611 -
    # 3 Short offline Completed without error 00% 597 -
    # 4 Vendor (0x50) Completed without error 00% 583 -
    # 5 Short offline Completed without error 00% 583 -
    # 6 Vendor (0x50) Completed without error 00% 575 -
    # 7 Short offline Completed without error 00% 575 -
    # 8 Short offline Completed without error 00% 547 -
    # 9 Extended offline Completed without error 00% 529 -
    #10 Short offline Completed without error 00% 355 -
    #11 Short offline Completed without error 00% 355 -
    #12 Extended offline Aborted by host 70% 355 -
    #13 Short offline Completed without error 00% 319 -
    #14 Vendor (0x50) Completed without error 00% 13 -
    #15 Short offline Completed without error 00% 13 -
    #16 Short offline Completed without error 00% 12 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
    Last edited by jesu (2015-05-03 19:42:53)

    Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
    Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
    $ lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 931,5G 0 disk
    ├─sda1 8:1 0 1000M 0 part
    ├─sda2 8:2 0 260M 0 part /boot
    ├─sda3 8:3 0 207,7G 0 part
    ├─sda4 8:4 0 25G 0 part
    ├─sda5 8:5 0 14,8G 0 part
    ├─sda6 8:6 0 80,5G 0 part /
    ├─sda8 8:8 0 599G 0 part /home
    └─sda9 8:9 0 2G 0 part [SWAP]
    So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
    Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
    Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
    dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
    [ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
    [ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
    [ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 653.821735] ata1.00: status: { DRDY }
    [ 653.821739] ata1: hard resetting link
    [ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
    [ 663.851604] ata1: COMRESET failed (errno=-16)
    [ 663.851610] ata1: hard resetting link
    [ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
    [ 673.881456] ata1: COMRESET failed (errno=-16)
    [ 673.881462] ata1: hard resetting link
    [ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
    [ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 703.012578] ata1.00: configured for UDMA/100
    [ 703.012584] ata1.00: device reported invalid CHS sector 0
    [ 703.012599] ata1: EH complete
    [ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
    [ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
    [ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
    [ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
    [ 742.443506] Buffer I/O error on device sda8, logical block 9323208
    [ 742.443508] Buffer I/O error on device sda8, logical block 9323209
    [ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
    [ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
    [ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
    [ 742.443524] Buffer I/O error on device sda8, logical block 9323216
    [ 742.443526] Buffer I/O error on device sda8, logical block 9323217
    [ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
    [ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
    [ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
    [ 742.443540] Buffer I/O error on device sda8, logical block 9323226
    [ 742.443542] Buffer I/O error on device sda8, logical block 9323227
    [ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
    [ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
    [ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
    [ 742.443555] Buffer I/O error on device sda8, logical block 9323234
    [ 742.443557] Buffer I/O error on device sda8, logical block 9323235
    [ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
    [ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
    [ 756.188116] systemd[1]: systemd-journald.service failed.
    [ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
    [ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
    [ 756.189143] systemd[1]: Listening on Journal Audit Socket.
    [ 756.189801] systemd[1]: Starting Journal Service...
    [ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
    [ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 758.503041] systemd[1]: Started Journal Service.
    [ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
    [ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867747] ata1.00: status: { DRDY }
    [ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867763] ata1.00: status: { DRDY }
    [ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867778] ata1.00: status: { DRDY }
    [ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867793] ata1.00: status: { DRDY }
    [ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867807] ata1.00: status: { DRDY }
    [ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867821] ata1.00: status: { DRDY }
    [ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867835] ata1.00: status: { DRDY }
    [ 974.867841] ata1: hard resetting link
    [ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
    [ 984.900902] ata1: COMRESET failed (errno=-16)
    [ 984.900908] ata1: hard resetting link
    [ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
    [ 994.930829] ata1: COMRESET failed (errno=-16)
    [ 994.930836] ata1: hard resetting link
    [ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 997.014012] ata1.00: configured for UDMA/100
    [ 997.014020] ata1.00: device reported invalid CHS sector 0
    [ 997.014023] ata1.00: device reported invalid CHS sector 0
    [ 997.014025] ata1.00: device reported invalid CHS sector 0
    [ 997.014026] ata1.00: device reported invalid CHS sector 0
    [ 997.014028] ata1.00: device reported invalid CHS sector 0
    [ 997.014030] ata1.00: device reported invalid CHS sector 0
    [ 997.014031] ata1.00: device reported invalid CHS sector 0
    [ 997.014065] ata1: EH complete
    There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
    root and home partitions are both ext4.

  • [SOLVED]Random system freezes

    Hello,
    My Dell Studio 1558 runs ArchLinux with XFCE. Everything is fine except two problems: Random system freezes and slow wlan download speed. I think that those problems might be related.
    Since some updates ago my Laptop will just randomly freeze. Unfortunately I cannot remember exactly when it started. The freezes will randomly appear without any regularity or possibility to reproduce. Sometimes it freezes immediately after booting, sometimes after some hours. Heating should be no problem as it also freezes when the Laptop is cold (what a joke )
    Sometimes it will freeze several times in a row, sometimes it won't freeze a whole day. It seems that it only freezes if there is Wireless LAN connection available. (I use wicd if that is of any importance.). It feels like the highest freeze rate is while downloading packages for system updates...
    lspci tells about the wireless chip:
    04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    uname -a
    Linux mydell 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011 x86_64 Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz GenuineIntel GNU/Linux
    So, according to the wiki page I use the broadcom-wl driver from AUR. I also tried the DKMS one which, of course, changed nothing. My modules array concerning broadcom looks like
    MODULES=(!b43 !ssb !lib80211 !brcm80211 lib80211_crypt_tkip wl)
    I ran memtest over several hours to make sure it's no memory problem. No errors in 5 passes. It has an ATI Chip which is powered by catalyst right now... Could be the source of the problem but I guess I'd have to test that further.
    Additionally I suffer slooooow download speed over wireless LAN since some periond (can't remember the exact starting point too...). It's not related to my AP, happens in other networks too. I tried several servers too. Max download speed: 148 kb/s :S
    I suspect that the freezes and the slow download speed are releated. Maybe a driver issue? I have no clue. I was unlucky to find error reports in the logs after the freezes. Besides, I have no real idea what to search for in the logs. I placed a desklet on my desktop now, to see the exact time and seconds when the freeze appears. I hope I'll be lucky.
    Can someone help me or give me some ideas what to do?
    Edit:
    There was another kernel upate and at least the low speed is gone... strange. Hope the same is for the freezes :S
    Edit 2:
    Downgrading pm-utils to 1.3.0 did the trick for me. No freezes anymore.
    Last edited by McFlow (2011-05-07 15:26:54)

    So, the freezes are still there. I also tried the open source ATI driver. My laptop will still freeze randomly. The highest freeze rate was during operations with pacman/clyde. I think this might point to either WLAN or HDD.
    I placed a desklet clock on my desktop and I could finally see the exact time when my laptop froze! But I cannot find anything interesting in the logfiles.
    This should be the last lines that were written before the freeze occurec in everything.log.
    Apr 22 16:49:46 localhost rtkit-daemon[3587]: Successfully called chroot.
    Apr 22 16:49:46 localhost rtkit-daemon[3587]: Successfully dropped privileges.
    Apr 22 16:49:46 localhost rtkit-daemon[3587]: Successfully limited resources.
    Apr 22 16:49:46 localhost rtkit-daemon[3587]: Running.
    Apr 22 16:49:46 localhost rtkit-daemon[3587]: Canary thread running.
    Apr 22 16:49:46 localhost rtkit-daemon[3587]: Watchdog thread running.
    Apr 22 16:49:47 localhost rtkit-daemon[3587]: Successfully made thread 3582 of process 3582 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Apr 22 16:49:47 localhost rtkit-daemon[3587]: Supervising 1 threads of 1 processes of 1 users.
    Apr 22 18:49:47 localhost kernel: [   42.385322] eth1: no IPv6 routers present
    Apr 22 18:49:53 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:53 localhost logger: ACPI group/action undefined: processor / CPU0
    Last lines from messages.log
    Apr 22 18:49:34 localhost logger: ACPI action undefined: ADP1
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:34 localhost kernel: [   28.860026] r8169 0000:09:00.0: eth0: link down
    Apr 22 18:49:34 localhost kernel: [   28.860452] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Apr 22 18:49:37 localhost kernel: [   31.674805] r8169 0000:09:00.0: eth0: link down
    Apr 22 18:49:37 localhost kernel: [   31.674822] r8169 0000:09:00.0: eth0: link down
    Apr 22 18:49:37 localhost kernel: [   31.675249] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Apr 22 18:49:39 localhost polkitd[3456]: started daemon version 0.99 using authority implementation `local' version `0.99'
    Apr 22 18:49:44 localhost kernel: [   39.143241] fuse init (API version 7.16)
    Apr 22 16:49:47 localhost rtkit-daemon[3587]: Successfully made thread 3582 of process 3582 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Apr 22 18:49:53 localhost logger: ACPI group/action undefined: processor / CPU0
    Apr 22 18:49:53 localhost logger: ACPI group/action undefined: processor / CPU0
    My laptop sometimes hangs at boot with this screen. I cannot take some usful information from it. But it seems, that it's also related to networking stuff? But I am not sure if that's the cause for my problem.
    I am lost. I have no real idea what to do. I think of using some other distribution in order to see if the freezes will occur there too. I hope this is "just" a driver issue...
    Last edited by McFlow (2011-04-24 17:48:27)

  • How to solve this "Prefix number: entry missing for system EC5 client 800"

    Hi,
       I am workflow learner, I am having theoretical knowledge on it.
    Now, I started to practice practically in my IDES server.
    I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
      My error message details.....
    Prefix number: entry missing for system EC5 client 800
    Message no. 5W023
    Diagnosis
    Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
    System response
    If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
    Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
    Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
    Thanks and Regards,
    Surender Batlanki.
    Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

    HI Surender and  Other SAP Work flow gurus
    Surender, u said, that you got the solution.
    As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
    in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
    I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
    Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
    Please gurus help me.
    Regard
    Guru

  • Macbook Pro 2.6ghz i7 2013 system freeze when using Premiere/AME CC 2014

    I have a Macbook Pro i7 2.6ghz form late 2013 and I have been experiencing some serious problems with my system freezing while using Premiere Pro and whilst rendering from AME.
    I am running the latest version of CC (8.1) on OSX 10.9.5.
    GFX card: NVIDIA GeForce GT 750M 2048 MB
    RAM: 16 GB 1600 MHz DDR3
    I have CUDA enabled, I need the performance boost so rendering previews of the CPU is not much of a option for me.
    I have experienced this problem since I started running Premiere on my laptop (3 months ago). If I am doing any GPU hungry processes within Premiere or AME the system will freeze, when it freezes nothing will respond and the screen stays frozen, I have to do a manual shut down.
    I went as far as replacing the whole laptop with Apple as they put it down to a faulty GFX card, the new one has the same problem which leads me to think that the problem is with how Premiere and AME work with the new Macbook Pro's.
    These crashes happen up to three times a day if I'm doing a full day of editing and I have to make sure I don't push the system to hard to avoid it, the crashes don't tend to happen when I am editing 5D footage but they are quite frequent when editing 4k GH4 footage. I am working off multiple hard drives with valuable data which are put at risk when the system crashes. I normally work on a 6 core Mac Pro but next week I'll be pushing my laptop pretty hard with a full week of editing and I'd love to avoid these crashes.
    If more info and specs are needed to identify the problem, I'll be happy to provide them.
    Cheers, Moja.
    ps.
    My system just crashed twice today, once while writing this message, I had a project open in Premiere but I wasn't even editing, its currently 30 degrees in Melbourne, one of the hottest days of the year yet, which leads me to believe that the heat is contributing to the GFX card or CPU overloading.

    mojareeves1 wrote:
    I forgot to add that I have also updated to the latest nvidia card driver.
    My music seems to keep playing when the crash occurs which suggests the hard drive and other components are still running fine, its just the GFX card that is crashing.
    The GFX card may be a red herring if it still crashes in software mode and with the internal card.  The fact that you have music playing, however, may be a clue.  Programs that can access your audio hardware (like Soundflower) at the same time as Pr have been known to conflict and cause crashes.  Turn off any background audio processes.  Check your system audio settings, as well as Pr's audio and audio hardware settings. If you can, change the source of Pr's Desktop Audio in Preferences>Audio Hardware.  Try changing the ASIO settings.
    The next (and most painful) step would be to work your way meticulously through this document:
    Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
    The "Re-create Adobe application preferences" step often helps a lot.
    Cheers,
    Jeff

Maybe you are looking for

  • How can you shuffle songs in a playlist in itunes 11?

    You used to be able to create a playlist, shuffle it, then synch it to your ipod.  This was done easily with a shuffle button in the library.  In 11 that button is no longer there.  How can you do this now?

  • Chinese character display problem

    Hi I can't display normal chinese character in a portlet or even on a "button" in a portal server 4.0 sp1, is there any config file I should modified or any suggestion? Thanks a lots

  • Agents on same port ?

    Hello All, It is possible to have two Agents running on the same port ? Thanks a lot, glains

  • Generate and read serial numbers...

    Hi all I'm trying to produce a system where we lock a projector's usage down to an individual. I'm intending to use the individual's email address, combined with their hard disk serial number and encoded to produce a serial number which can be quickl

  • Songbird doesn't launch

    Hi, my songbird installation refuses to start: /opt/Songbird/songbird: line 169: /opt/Songbird/./songbird-bin: No such file or directory That is really strange, because ls -l shows me: [sebastian@SL500 Songbird]$ ls -l /opt/Songbird/songbird-bin -rwx