Number range 01 for object BANF is nearly exhausted.
Hi ! When we do total planning run in the background we got the message "Number range 01 for object BANF is nearly exhausted.". Our system is configured to create a new purchase requisition for every requirement. I can found that we have reached 98% of our PR number range and the warning message (through SNRO) is set at 2%. As a temporary solution, before I assisgn a new number range to PR, I reduced the percantage for warning message to 1% so that we can get few more days before the number range is changed. But, we continue to get the same error and no purchase requisition is created. Kindly help and suggest.
regards,
Satya
this is probably caused by the buffering. Buffering of numbers is made to increase performance. the Program reads the number range just once to get 10 numbers (and the percentage for the warning message as well, otherwise it would not make sense to use buffers if SAP has to access the number range anytime to check if it is nearly exhausted )
Similar Messages
-
Number range for object BANF does not exist
Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP listHello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh -
Excise Number Range for Object J_1IEXCLOC
Dear All ,
I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
Regards,
Swapnil Vaidya>
swapnil vaidya wrote:
> Dear All ,
>
> I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
>
> Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
>
> Regards,
>
> Swapnil Vaidya
It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
Regards,
Aroop
PS: Your question is more relevant for SD than MM. -
Error: Number range for object RESB does not exist
Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number
range or interval has been maintained in Customizing of MRP or if t
number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term plannin
MDTB MRP list
Procedure
Check the number ranges in Customizing. If you do not have the necessa
authorization, please get in touch with your systems administration.Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object MRES/DREQ
No. From Number To Number Curr Number Ext
01 0000000001 8999999999 380 blank
02 9000000000 9500000000 blank checked
RB 9500000001 9999999999 blank checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM -
Number range for object MDTB does not exist - Message no. 61501
Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
ShankarHi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK -
Alphanumeric number range for object QMERKRUECK
Hi all
I have raised a question on number range object QMERKRUECK few days back.
Internal number assignment for object QMERKRUECK (numbers are in critical area)
With reference to the same please let me clear, if it is possible to create alpha numeric number range for the same object.
I tried in SNRO but system does not allow for this.Next is , if any userexits are there to achieve this.
I know, this issue is hardly seen in any implementation but if anybody has gone through this and got a proper solution, please share your experience.
Regards
D MohantyHello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh -
Number range for Object (Organizational unit, Job, Position)
Hi all,
How to maintain number range for Organizational unit or Job or Position by Company Code or PA, EG, ...?
Thanks,
QuangHi,
For organizational objects maintain number ranges via OONR.
e.g. In order to maintain number range for C - Job object in plan version 01 add the following line to OONR:
01C IN EX
Then select this line and hit "Number range maintenance"
There create the interval you want.
(EX 60000000 69999999)
For PA, EG there is no number range maintained.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Jan 14, 2010 8:08 AM -
Number range for object AUFTRAG
Hello,
we have in number range group Ztest but fot this group there is number range number missing.
Problem is when i click on ztest group and go to Interval maintain it does not allow me to put the new number range.
I dont want to deleted the exsisting Ztest group and redifne it.
Regards,Hi Yusuf,
You have posted this under SAP Community Network Forums » SAP NetWeaver » SAP NetWeaver Platform .
Please post it under ABAP General. You will get more answers there.
Also, please have a look at Note 52390 - Transport of number ranges with group.
Regards
Prasenjit -
Creation of Unique Number Ranges for Organizational Objects
Hi Gurus,
As per our client's requirements, We need to create unique number ranges for Organizational Objects such as O,S,P to distinguish based on the Object ID. Could you please help me out to create the same.
And also to create unique number ranges for Personnel Development Objects such as QK & Q.
Thanks in Advance
Regards
Vinoth Kumar.RHi,
To maintain object specific number ranges, go to customising node Personnel management --> Org. management --> Basic settings --> Number range manitenance --> Maintain Number ranges
Here there will already be a default entry as $$$$.
To create different range for object say O you can use the following options:
Create entry as $$O - number range applicable to all Org units across all plan versions.
Create entry as 01O - number range applicable to all Org units under plan version "01"
Then under Interval maintenance create the desired number ranges under IN for internal or EX for external (check the external tick box for external number ranges)
In the similar manner you can create the number ranges for objects C, S , Q & QK.
Hope this is helpful.
Regards,
Shreyasi. -
Change in number range for Job Family
Hi,
We have a requirement where we need to change the existing number range for object type Job Family.
The number range begins from 500* series. Now this needs to be changed to 90000000 number range.
Now the question is what would be the impact if we delimit the objects with earlier JF number range and
create the job families as part of the job catalogue with 90000000 number range.Hello,
Only difference/impact is you will get new number ranges only.
regards -
Number range R4 for object BANF nearly exhausted
Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM -
Different Number range for different objects
HI Gurus
Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
Your early Advise will be appreciated.
Thanks
ChandraHi Chandra,
SM31 -> T77IV : 01S -> Number Range Maintenance.
(or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
For the subgroups
01C (plan variant 01, Object type C) Job
01O (plan variant 01, Object type O) Org unit
01S (plan variant 01, Object type S) Position
Define the following number ranges respectively.
(EX 60000000 69999999)
(EX 70000000 79999999)
(EX 80000000 89999999)
Regards,
Dilek -
Number range for rental object
rental object type rs and ps use the same number range ?Can I distribute the diffierent number range for the different type?
Dear Pan,
PS/RS/RU are called RO in RE-FX and use the same number range, however you can use BAdi to assign the required number to PS or RS.
RECACUST--> Master Data --> Usage View --> Rental Object--> Implement Enhancements (BAdI) --> Number Assignment, Validation, Substitution.
Kind regards,
Kishore -
How to create number range for custom object
Hi all,
I want to create number range for custom object or custom tables
Thanks
HemalathaHi,
Thanks, I am able to create a number range for custom object through SNRO tcode.
Thanks
Hemalatha -
Set Up number range for OM Objects
Hi All,
I have set up Ext number range for Org Unit & Position.
example: Org Unit 50000000 - 599999999 and i have uploaded data till 50000999.
so it should be update current number as 50000999.
but in my scenario its not updating current number still is '0'
Please help me.
regardsHi Waseem
I am agree with your reply as I am doing the same thng. Currently I am using External Number Range as I am going to upload data and later will change into Internal.
but my question is in Number Range Maintanace in Current Number should be update automatically or not.
Example Org Unit from 500000000 - 59999999 and we uploaded data till 50000900
so in Current it should show 50000900
NO From Number To Number Current Number EXT
EX 500000000 59999999 0
but in my case it is showing '0' in current number
so Please confirm me whether it should update automatically, if yes pls tell me how
regards,
Maybe you are looking for
-
Today is the day the preloading will work! Help...
I've tried and tried to find different ways to make the preloading work correctly but there is always something that doesn't seem to work with each way. Could someone dumb it down for me and help me understand how to make this work. I've read everyth
-
Maintaining length of originally recorded clips
I was pretty good with iMovie 6 and my miniDV camcorder, but now am working with a Canon HF11 HD camera (flash memory) and iMovie 7.1.4 and it is like starting over again. Sorry to ask what is probably a very basic question, but thanks in advance for
-
Restoring iPhoto and iTubes from Carbonite backup
My iMac crashed when upgrading to Mountain Lion - no biggie in my mind as I have Carbonite and all my data was backed up to the cloud...... my data might be there but not in a manner that will easily restore into iTunes or iPhoto! Carbonite customer
-
Extending the quiz template in Flash 8
Hi, I'm working on a project in Flash 8 where I am making a quiz. However, the quiz needs to have more features than the templates, and I haven't learnt enough about Flash to code it myself. Here are the things I need to do: 1. Set a time limit so th
-
Putting my java application on cd
Hi, im quite new to this. Me and my group have developed a software using java, and I want to be able to put my application on the cd so that if i were to give to some one, he would take the cd, and install the program on his computer like any other