Number Range BU_PARTNER & CRM_SERVIC

Hi,
We have newly Installed the Solman 7 EHP1. I have configured Standard Service Desk & CHARM.
But when I created first support message its number is 8000000074 next number is 8000000075. After this next ticket number is 8000000080, 8000000082.
There is no continus numbers.
Even in Business Partner number also I am not getting the sequence. Randomly system is assigning numbers.
What coud be the reson.
objects BU_PARTNER & CRM_SERVIC
Regards
PK

Hi PK,
I see two reasons for this not so randomly assignements :
1. If you create a support message, a number is reserved within the number range you define, but if you don't save the message, the number will be lost.
2. there a buffering system for reserving numbers in the application server this buffer can be the reason why there is a gap in ticket numbers (Tx SNRO).
Hope it helps.
Regards,
Stéphane.

Similar Messages

Wrong number range in ECC Message creation in "Create Support message " tab

Dear All,
While creating the support message in any R3 server (ECC,BW etc.) system by clicking
help->create support message option in main menu tab.
The message number sequence changes from existing to new saequence.
The initial sequence is 9999011940 but the current sequence generated
by system is 1549. We had updated our R3 system with SAP_APPL component
stack to 17. This changed sequence is happening after patch upgrade.
Thanks in advance.
Regds
Ravi Kant Arya
+91 9818880902

Hi Ravi,
Did you also patch your SOLMAN system ?
I believe this is controlled by number range object CRM_SERVIC in your solution manager. Check OSS note 903528 (particularily the section around the resetting of the number range object)
Regards.
Ruchit.

How to change number range in solution manager

Hi all,
Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
how/where can i change the sequence of the support messages(number ranges).
Thanks & Regards
Nick Loy

Hi Prakar,
Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
System is not allowing me to chagne the existing one.
now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
01 0000000001 0000999999 780
02 9999000000 9999999999 0 External
I want to change the message sequence starting from 9999000001 which is in extenal number range.
And one more thing, where can i find the number range which is being used for particular transaction?
can you help me how to change?
Thanks & regards
Nick Loy

Error exporting NUMBER RANGE DEFINITION

Hello and HAPPY NEW YEAR,
I have made a Number Range Definition object but I cannot export it through the transport system, this what I can see in the transport system:
S17K900461 Autonumbers for DPM Demand file 04.01.2007 2:49
5 S17 Company Test System
4 ADO export 04.01.2007 22:50:47 Cancelled (12)
 Export 04.01.2007 23:20:40 Not yet executed
Export application-defined objects
Transport request___: S17K900461
System______________: S17
tp path : tp
Version and Release: 252.08.34 40B
R3OB NROB ZISPDMNUM were exported
Program terminated. See long text (job: RDDDIC0L, no.: 22495801)
 See job log
Time... 22:50:47 Run time... 00:00:00
Export application-defined objects
End date and time___: 20070104225047
Ended with return code: ===> 12 <===
Also in the log file in unix you can see the error:
START EXPORT OF S17 X 20070104100830 s17adm athens
START tp_getprot S17 20070104100830 s17adm athens
ERROR S17K900433 S17 X 0012 20070104100921 EKEKAKOS s17adm athens
STOP tp_getprot S17 20070104100931 s17adm athens
STOP EXPORT OF S17 X 20070104100931 s17adm athens
ERROR: stopping on error 12 during EXPORT OF SELFDEFINED OBJECTS
Also all the backround jobs of RDDDIC0L,RDDIMPDP of all users (DDIC and me) in all clients are terminated without any log.
Can someone help me on this serious problem?
Thanks in advance

Hi,
for 1) there is a solution for sure. What you are looking for is "early number assignment"
Customizing -> ... -> Change Request Management -> "Define Transaction Types"
Double click your transaction type and uncheck "Early No. Assgt."
For 2), never tried alpha numeric but it should work. You need to define your own number ranges and assign them to your transaction type. Re-assign to numeric ones after testing is done.
Number Range object is CRM_SERVIC
Regards

Number Ranges in Txn. CRMD_ORDER

Dear All,
While creating an order in Txn. CRMD_ORDER, we need to define our custom logic for number ranges.
Please suggest on the same.
Regards,
Ramki.

Hi,
Following Logic you can use for number ranges
1. Find out Standalone CRM Transaction & create Internal Number Range for that which will remain in CRM only.
2. Find out CRM transactions which are replicating to ECC .For those transactions create INTERNAL Number range & Note down the interval limits of the number ranges. Same Interval you have to create in ECC as EXTERNAL
For all sales related transaction Use object CRM_SALES
For all service related transaction Use object CRM_SERVIC
Best Regards,
Rajendra Sonawane

Contact person number range assignment

Hi all,
I have Created contact person number range using T Code : VPN1.
where do we assign this number range.
can any one tell me the "assignment process" menupath or
T code.
Thanks in advance.
Regards,
Shaik

Isn't the account group and contact person a different object?
Tcode: SNRO
Account group: DEBITOR
Contact person: BU_PARTNER
You can create the same numberrange in different objects.
Check http://help.sap.com/saphelp_crmscen70/helpdata/en/60/85b5d333f4174b8e982c1c15db35f3/content.htm

Custom number range

Hi All,
When ever i create a service order,i want the system to give the number with the year and serial number.
i.e lets say i am creating a service order in the year 2009 or 2010,then the number of the order should be
92009001 , 92010001.
9 should be unique to all service orders.
Please let me know how do i achive this requirement.
thanks
Sam

Hi Sam
Try this:
Tcode: SNRO
Object: CRM_SERVIC
There is a checkbox for "To-year flag" which has the following help text:
Flag, whether number range object is to-year relevant
ID determining whether the number range intervals are distinguished according to To-fiscals.
Hopefully this flag might give you an option to select the validity of your number range. Also you'll need a 10 digit number range since your format 92009001 will only allow you 999 service orders in one year.
Hope this helps
Rupesh

Excise invoice and domestic invoice sharing same number range

Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakraborty

Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

CRM ISA R/3 Edition on AP 7.0 Pricing Routine Number range error

Hi Experts,
For our R/3 ISA Secenerio I have developed a Pricing Prepare Routine (PRP). I have uploaded this routine into AP 7.0 ( which runs my IPC 5.0). Now when I try to register my PRP routine I'm not able to do so because of Number range not defined for Application V Scenerio A and Routine Type PRP.
My question are:
1) For a PRP type Routine( Multiple Implementation) is it important to assign a
routine number? ***( according to pricinguserexit manual dummy routine no
has to be assigned)******
2) If yes then how can i assign Number range for this combination.
NOTE: AP 7.0 has SP 7 ( So it fullfills requirment for Special scenerio)
I have never recieved a reply for my query from this forum... hope someone helps this time. :)
Regards,
Dipender Singh

go to http://www.configuration-workgroup.com/ and find technical doc about IPC 5.0 that i presented at Marco Island in 2006.

How to assign numbers in external number range?

Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AM

With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

Number range purchase requisitions at storage location level

How can I define a number range for purchase requisitions at storage location level? I have one plant with several storage locations and I want a number range for purchase requisitions per storage location.

what is the background to this request?
I guess that the requestor can easily identify their own requisitions among many.
I dont think that this is necessary with SAP, do not put to much importance in numbers, there are many other options to meet the users requirements.

Billing doc external number range

Hi Guys,
As per my knowledge billing doc uses only Internal number range but when i check table: TVFK i can see No. range external maintained (XX) same maintained my company where shall i config this please give me idea and steps.
Regards
JACK

Hi Jack
In VN01, number ranges for all will be maintained wherein you can see on the right side a tab "Ext". If you tick in this box, assign to your billing types in VOFA, then whenever you do billing, external numbers will be generated.
Reward if this helps you.
Thanks
G. Lakshmipathi

Number Range BU_PARTNER & CRM_SERVIC

Similar Messages

Maybe you are looking for