Number range for Maintenance Order (IW31) - Any exit

Hi All,
I need to go for internal number overwite for Maintenance Order (IW31)for object AUFTRAG .
I am going to maintain ztable which contain order type and  NRRANGENR.So,based on the ordertype i have to populate  NRRANGENR in the exit.
Can you please tell me any exit or badi or through enhancement spot we can apply number range for maintenance order.
Thanks .
With Regards,
Ambrose

Hi,
Do you need an exit ?
You could create number range groups each with a specific number range. Then assign each order type to a particular group depending on which number range you want it linked to. If necessary have a different group for each order type.
Configuration can be done in transaction SNRO for object AUFTRAG.
-Paul
Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum (for PM/CS specific topics).

Similar Messages

  • Number Range for Maintenance Order Type

    Dear All,
    Please help me in regarding for Number range  Change in Maintenance Order Type.
    I have different types of maintenance order...such as PM01,PM02, PM03, PM04, PM05, PM06, PM07, PM08.
    and i have to assign number range different for all the maintenance order type. kindly help how can i assign the same separately.
    also in case of Notification types also.
    Early response is highly appreciated.
    Thanks
    Sushant

    Greetings Sushant,
    Firstly, maintain all the Order Types you want in SPRO.
    To maintain the number ranges, you will need to go to t-code OION. Then select "Maintain Groups (F6)" and create a group with a number range for each of the Order Types that you require.  Each will be a separate interval. Then place the cursor on the unassigned Order Type and select "Assign Element Group (F7)" Repeat for each Order Type.
    Notification number ranges are maintained in t-code IW20

  • Alpha Numeric number Ranges for Sales order Acording to sales office wise.

    Hi Experts,
             I have a Issue for genrating sales order numbers With Alpha Numeric Number Ranges for sales office wise Internaly . How can we get this is there any Userexits or badi for this . If Any one Come across this issue plz guide me.
       The Alpha characters should not change that will be sales office region code. only the Numeric numbers should change .
    Ex;   Abc-123000  to Abc-200000
    Regards,
    Ravi.

    This alpha-numeric format is not possible directly with SNRO settings.
    You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
    http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
    any more inputs from experts are welcome..
    Hi,
    1. goto include MV45AFZZ and to user exit Save_document This form is called before COMMITand double click on FORM USEREXIT_SAVE_DOCUMENT.
    2.it will show the program MV45AF0B_BELEG_SICHERN from were this user exit is called, selcet the program and click on Display.
    3. you can use the enhancement point enhancement-point beleg_sichern_01 spots es_sapmv45a. just below the PERFORM USEREXIT_SAVE_DOCUMENT to call the badi method on_costing_component.
    regards.
    santhosh reddy
    Message was edited by:
            Santhosh Reddy
    Message was edited by:
            Santhosh Reddy

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • External Alphanumeric Number Range for Internal Orders

    Hello,
    I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
    How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
    Any help will be appreciated.
    Thanks.

    how many do you need?
    Just one, that covers all?
    a0000000 - zzzzzzzz

  • Number ranges for purchase order in SUS- why?

    Dear Gurus,
    In SPRO settings, I have seen the option for defining the number range for purchase order in supplier self service system. similarly, there is an option for defining the number range for purchase order response.
    Why do we need to define the number range for purchase order and its response in SUS system? In SUS system, the purchasing documents from SRM and MM system create corresponding Sales Order and its follow-on document. So, we need to define the number range for sales order not purchase order.
    In spro documents, it says you need to define the number range only if you create purchase order locally in SUS.
    What does it mean?
    regards,
    Ranjan

    Hi Ranjan,
    Unfortunately in SUS, Sales orders are referred to as Purchase orders only. Hence any PO with a number say 450000000 that comes into SUS will have a corresponding number in SUS as 19000000.
    Sam has already explained the PO response part.
    Regards,
    Nikhil

  • Number range for different order types

    hi
    pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
    thanks and regards

    Dear ,
    Goto CO82 ,
    1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
    2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
    Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
    3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
    4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
    5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
    Revery back if u need any help
    Regards
    JH

  • Plantwise separate number range for Production order

    Hello SAP Expert,
      I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
       Please give way to do this.
    Thanks in advance.
    Regards,
    Yogesh.

    Hi,
    As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
    Regards,
    Dhaval

  • Number range for Production order

    Dear All SAP PP Gurus,
    I am new to SAP PP and want to learn about number ranges for production order.
    Can anyone tell me step by step procedure for creating & Assigning
    number range.
    Thanks in advance.
    Regards.

    Hi MIHIR,
    I just chkd the blog spot of MR Siva.
    It is very much self expalnatory.
    Siva ,pls update more documents in ur blog,it is very much helpful
    THNX all

  • Number Range for Transfer Order

    Hi,
    When I create transfer order with reference to outbound delivery, an error message says "Maintain number range 01 for transfer order". I could see the number range 01 maintained in T- code SDPI. But I would like to know how we maintain number ranges for transfer orders and why this error message has come?
    Thanks,
    Betty

    Hi
    In-img-logistics execution-shipping -pickinglean ware house management--define control paramaters and no ranges for lean warehouse management
    1.Here you will define the control parameters for lean warehouse ( no ranges too)
    2.Define no ranges
    3. Assign no ranges
    Please check have you maintained entries for your warehouse here if it is lean
    In img----logistics execution-warehouse management-master data--define no ranges
    T code OMLW if it is central warehouse
    Regards
    Raja

  • Number Range for production order / Planned order

    Number Range for production order / Planned order depends upon what?
    Plant, order type, mrp controller??

    Dear,
    Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
    Planned order  :- Plant specific OPPQ or OMI2.  Number ranges for Manual creation - OMI3
    Hope clear to you.
    Regards,
    R.Brahmankar

  • User Exit for Maintenance Order(IW31)

    Dear All
    While Creating Maintenance Order , (IW31) ,,,   It is taking the cost center from the Equipment  Master  , But  my client doesn't want this . I need a user exit for this .
    How to solve this ?
    I have tried with the exits find inSDN , bcoz cost center filed is not in the exporting parameter of the function module.
    Kind Regards
    Karthikeyan.P

    hi karthick ,
    yes it cost center is picked from eqpt master record and it is use for creation of a default settlement rule in IW31 ... if u dont want that then just dont maintain cost center in eqpt master record and if ur requirement is to have default settlement rule for order type then user [ IWO10027 ] User exit: Generate user-defined settlement rule ...
    regrds
    pushpa

  • Multiple number range for planned order

    Hi,
    I want maintain different number range for MRP related planned order and manual creation planned orders. I have checked OPPQ and OMI2 transaction but i could not get any clue to create different number range for same plant. Let me know is how we can create.
    Regards / US

    Hi Uma,
    number range is dependent on plant alone and I don't think there is an user exit or badi to change number range at planned order creation.
    I guess the alternative is an enhancement or using some other field to determine what planned orders are manual.
    regards,
    Edgar

  • Different number ranges for same order type

    Hi PP Guru's ,
    Can anyone send me the user exit for the differnet number range creation for the same order type.
    Same order type is used in two different Plants. So our client want to track the production order plantwise.
    Thanx in advance.
    Regards,
    Nagraj

    Hi Nagaraj,
    The number range is defined at order type level ( i.e. client level)
    So if you want to use different number range for different plant,  then use different order type for different plants.
    Thanks and regards
    Murugesan

  • Number Ranges for Service Order

    Hi All,
    I want to create no. range for service order.
    Generated no. should contain plant code as well.
    eg VSC00AA001
    here V is hardcoded
       SC00 is plant code &
      AA001 is no. generated from no. range.
    Pls. tel me how to proceed...
    bye,
    Pranjali

    This alpha-numeric format is not possible directly with SNRO settings.
    You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
    Regds
    Manohar

Maybe you are looking for

  • Outlook for mac, message HTTP error resource not found 18596

    outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!! Help appreciated!!!!!!!!

  • FOREACH scenario : usage of Receiver or Interface variable

    Hi fellow ccBPMers I have scenario with flat files that must be read and split up into individual files. First file is a Header Flat File containing 4 Header records A xxxxxxxxxxxx B xxxxxxxxxxxx C xxxxxxxxxxxx D xxxxxxxxxxxx Second file is a Detail

  • "Find Form" calendar is not working after migration

    Hi, We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-401

  • How set variable in Terminal (once)

    In a Termina lsession, I want to create a new variable, MLROOT, and assign it the value of a path: /Applications/Mathematica.app/SystemFiles/Links/MathLink/DeveloperKit/CompilerAd ditions I've tried the following,and just get a "not a valid identifie

  • Restoring old Bookmarks - after structural changes

    Hi all, Is there any way of reflecting/restoring the 'old' bookmarks with the new elements? We have thousends of defined bookmarks and scared that they may all have to be recreated to see the new fields after few additions and deletions to the web re