Number range for material documents

Hi SAP Gurus,
Can anyone please advise if we can reset number range for material documents once it reached to last number for existing number range ?
Thanks & Regards,
Manoj

Hi,
If material numbering reached to last number for existing number range, you can create Number Range Text Group and assign to your material type in following path
IMG -> Logistic ->General -> Material Master ->Basic Settings ->Material Type ->Define Number Range for each Material Type
OR
T.code:MMNR
Lets example you have now:
Number Range Text Group:01
From Number:     1
To Number     :19999999
Now you can create Now One Number Range Text Group
Number Range Text Group:02
From Number:20000000
To Number     :29999999
Now assign Number Range Text Group to your material type in MMNR , {{by clicking group in menu, select maintaion->group->insert
Number Range Text Group:02
From Number:20000000
To Number     :29999999
and save}}.
Regards,
Biju K

Similar Messages

OMX4 - FBN1 - Number range for Material document and FI document

47 - is for FI document number range in Material ledger FBN1. OMX4 gives number range for Material document. My question is how big the number range must be? Since thousands of Materials involved, I couldn't imagin this?
Anybody knows, how to determine the size of no. ranges in Material Ledger configuration? SAP simply says, check no. ranges whether it meets the requirement....
I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
Cheers,
Ashok

What is the number range you are using? Year Dependent or Independent?
When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

How to setup number range for Material Documents created by goods movement

Hi Experts,
Good day!
Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
Thanks. Have a wonderful day!
Rockz

Hi,
Tcode - OMBT
Regards,
Vivek

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

External number range for GR document

Hello,
1. Is it technically possible to create external number range for GR document (material document) - Note, PO is also having ext number range
2. Is it adviseable to create ext num range for material docs?
Thanks
Regards

hi,
1. it is possible to create external number ranges for GR document.
in spro config settings: use transaction OMBT and in that enter a number range and check that external number range check box.
2. it is not advisable to have external number range for material docs --> because for every movement of the material end user has to giva an entry for material document.
hope this may help you,
regards,
srinivas

Number range of material document

hello guys...
can anybody say that where we have to assingn the number range of material documents
regards
vamshi

Thanx Rambhupal Reddy
but still i am getting this error after pressing the green flag in VF02 , that
" For object RF_BELEG VAMC,number range internal 01 does not exist FBN1"
After clicking the error...i am getting
Diagnosis
The database table NRIV has the delivery class 'c' i.e., the SAPdefault settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transation code:FBN1
regards
vamshi

Define a number range for settlement documents

Hello,
We are getting below error while doing T-code AIBU asset settlement.
Define a number range for settlement documents
Message no. KD 522
Diagnosis
No number range for settlement documents defined in controlling area ACA2.
The settlement document is a document type in its own right, which is used for cancelling settlements and repeating month-end closes.
Procedure
Define a number range for settlement documents. Choose Maintain number ranges for settlement documents.
Thanks,
Ratnam

Hi......
Try to use the following T.code : SNUM,
1. Group -> Maintain and Group -> Insert
2. Give your number range a description.
3. Specify one interval for the number range. If you use up this range, you can add more intervals.
4. Select one or more of the controlling areas listed in the block "Not assigned".
5. Place the cursor on the number range to which you want to assign the selected controlling areas.
6. Use Assign element group to assign the controlling area(s) to the appropriate number range and save your entries.
Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
Dependent tables are not transported or converted. Note that the appropriate application table is also transported for number range objects used for group maintenance.
And use :OKG6
I hope you will get some idea.
Regards
vamsi

External Number Range for Billing Documents

Hi Friends,
Can any pls tell me how to create external number ranges for billing documents. We are trying to Map the Invoice nos from POS system to create and match the billing nos in both the systems. Pls help on how can I do this.
Thanks
Raj

Check this thread
[Re: Customize Billing Number Format|Re: Customize Billing Number Format]
thanks
G. Lakshmipathi

External number range for billing document (Invoices)

Hi guys,
I have a requirement from one of client to implement external number range for billing documents.
I can only see a provision for internal number range in customising for Billing document type.
Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
Thanks, Felix

Hi Felix
I think the similar requirement is in Venezuela also.
So pl. check the SAP Note 849438 . As per the note :-
The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
3. If you are implementing the note in release 4.6C, please create the following function modules:
o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
4. Implement the source code corrections as shown below.
The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
Regards
Amitesh

External number range for Sales Document

hi,
I have a requirement to generate external number range for sales document. I tried this user exit (MV45AFZZ) to generate external number.
FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
Endform.
between these form and enform i written my logic and passing to US_RANGE_INTERN. But can one suggest where to write to generate external number range.
Can any one help me out.
Thanks and regards,
Vijay.

Hi
Here you can assign a different number range for your sales order.
The number range is linked to the order type (field VBAK-AUART), this link is done in customizing.
It usually uses this routine if it can't assign the range in customzing because (for example) for different sales area it need have different number ranges for the same order type.
So you should create an external range by trx SNRO and then assign the number before entering in the main screen of va01 or saving the document.
When you need to assign the number depends on how you want to manage your range.
If you assign the number in entering you has to make sure to not assign the same number document to severals order to be created in the same time by several useers.
Max

How to determine number range for billing document based on company code ..

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...plz help me!!

Hi Amit,
1. Define different Billing Document number ranges in SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
e.g.
NO. From number To Number    Current number Ext
A1   0930000000    0930999999
A2   0940000000    0940999999
A3   0950000000    0950999999
2. Define a Ztable ZNUMB_RANGE as follows
Comp. Code | Tax departure country | Billing Doc Type | Number Range
100                IN                               F2                      A1
200                IN                               F2                      A2
200                US                              F2                     A3
3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
If found pass this number range value to us_range_intern.
us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
Let me know if you are clear.
Thanks,
Mandar

Year wise Number Ranges for Sales Documents

Hi,
Can any body tell me how to reset number ranges of SD Documents when fiscal year chane.
Thanks

Hi Kapildev,
   In standard functionality this function is not there you need to look forward for user exit.
   Check this:
   User exits in the program MV45AFZZ
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment
depending on the required fields. For example, if you want to define the number range
depending on the sales organization (VKORG) or on the selling company (VKBUR), use
this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
Thanks,
Swamy H P

"Alphanumeric" number ranges for material matser

Hi all,
What are the sequence of steps needed to create "Alphanumeric" number ranges for material matser. Can anyone explain me the steps.
Thanks

Hi,
To add to what Sridhar has said ....we have got 2 number ranges only...
either internal or extenal.....
Better idea is to have internal only untill or unless it is at all required so.
It all depends on material type....
In internal it is more easy to maintain the ranges....but in case of extenal....lot more precaution is required.
Award if any thing answer you query .
Thanks
Dipak

Number range for billing document..its urgent!!

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...

Hi,
Look at object RV_BELEG in t.code snro. It is the number range object for SD Documents. Click on Number Ranges and then Intervals to view the different number ranges and associated intervals.
Now look at t.code 0vlk, which is Define Delivery Type. If you double-click on a delivery type BV it goes to more detail. See the field: "NR int. assgt.". This is the number range for delivery type BV.
This number range will be used in any company code or tax departure country that this delivery type is used in.
Regards,
Shamma

Change Number Range of Material Document

Hi Guru,
We have a requirement to change material document number range that depend on movement type.
I have check in SPRO and read some document for material document number range.
I understand that this is a standard SAP.
- GR from PO or Order         Number Rage will be 5000000000 to 5099999999 and Fiscal Year
- GR Other, GI, Transfer      Number Rage will be 4900000000 to 4900000000 and Fiscal Year
My question is Can we change this number range?
I guess that we have to implement BADI or User-Exit to determine new number rage but I don't know how to do this.
Please kindly advice or guide me.
Thank you very much.
Saiyaman

Hi,
Insted of Movemen ttype you can asign seperate number range to a transaction code follow the process as below
   First u need to create seperate document type in OMR4 or OBF4,   then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
regards,
zafar

Number range for material documents

Similar Messages

Maybe you are looking for