Number range for Org.Units, Jobs and position
Hi,
Can someone guide me on how to create number range for Org. Units from say 10000000 (My org unit series should start with 1xxxxxxx), Jobs 20000000 and Positions from 30000000. Step by step would be helpful.
Also any link to any document would be appreciated
Regards
Uday
Hi,
Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
It will take u to the next screen >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
NO From Number To Number Remarks
01 1 19999999 This is Object range
Note : do not enter anything in "Current Number" & Do not select "Ext"
I hope this will help you....
regards,
Navinkumar
Similar Messages
-
Actions for Org.Units, Jobs and Positions
Dear All,
I know how to create or copy the available actions for Org Units , Jobs and positions thro' the table T777M and run them through PP03.
Once I do it , when I want to skip some of the relationships it doesnt allow me to , the next page tab is grayed out.
I mean if we have for ex. a position reporting to a position and because he is, say CEO and I want to skip that relationship I am unable to , how to activate the skip or Next page tab ??
Regards
UdayHi,
Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
It will take u to the next screen >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
NO From Number To Number Remarks
01 1 19999999 This is Object range
Note : do not enter anything in "Current Number" & Do not select "Ext"
I hope this will help you....
regards,
Navinkumar -
No entries for org unit, job or position in T5KWB
Hi Experts,
I am running payroll for canada , i am getting this error for 2 employees for whom the org assignment been chaged recently -
now they are giving , kindly help me - i have checked this table T5KWB and it dosnet hold value maintained for org unit
50737186
KTXDM Canadian Tax Infotypes Data Management
Input
P0461
P0462
P0463
P0464
Processing
No entries for org unit, job or position in T5KWB
Search in organization structure failed
Check T5KWB for org unit 50737186 or higher-level org unit for 20101031
Thanks
JayHi Jay
Get the position of the employees for whom you are getting the error message and maintain infotype "Canada Groups for WCB" for those positions. This should solve your issue.
You may want to go through below link:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
Hope this helps
Best Regards
Reddy -
Number ranges for material document (migo) and inventory documents
Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level. -
Extrernal Number Ranges for Handling Units in COWBPACK
Dear Friends,
I need to activate external number range for handling units in COWBPACK transaction.
When I run COWBPACK, I don't get any field to enter Handling Unit Number.
Can anybody suggest the way out.
Regards,
HarshOK
-
External Number Range for Handling Unit in COWBPACK Transaction
Dear All,
I need to activate external number range for handling units in COWBPACK transaction.
i have tested but its not possible in standard SAP.
i want to know any USEREXIT or BADI or BAPI for the same, so that we can use external number range for HU in COWBPACK.
with regards
Azeez.MohdHi,
Thry this BADI
BADI_HU_MAIN
BADI_HU_SAVE
Regards
GK. -
Separate number ranges for GR against PO and GR against Production Order
All SAP Gurus,
Is it possible to have Separate number ranges (for Material Documents as well as for FI Documents) for GR against PO and for GR against Production Order?
Regards,Hello Anusha,
Basically you need to maintain the confirmation control key in the Info record or the vendor master in order get the option of doing an inbound delivery and not a rough GR. in info record in purchasing screen and also the same screen in vendor master.
The above is a permanent setting for a vendor, if you want to do it temporarily, you need to go to the confirmations tab in PO item details and change the control key in there.
I hope this is what you are looking for
regards, -
Hi,
Can i give the BP number range as external for the org units created in org model, so that i can give an external number while creating the org unit in the org model.
thanks,
Sarat.Hi Sarat,
Any Org unit created in the Org model will be created as BP and you can give the number range.
What i suggest is go to best practises in help.sap.com and select C02_BB_Configurationguide_en and this has the details how you can give the number range and grouping.
Thanks and reward points if helpful
Srini -
External number range for storage units
I have been trying to set this up without success.
1. If I set up an external number range and assign it, then the system tells me to set up an internal number range.
2. If I set up an internal number range the system does not allow manual input (external assignment from internal number range not allowed).
I have allowed internal and external assignment for the warehouse.
This is the error that I get when trying scenario 2.
"External assignment of numbers from an internal number range not allowed
Message no. L3212
Diagnosis
The external storage unit number to be issued is in an internal number range.
Procedure
Unlike other applications, external number ranges in the WM system are not explicitly defined. Instead, they are taken from the unused numbers in the internal number ranges when the "Issue type" switch in the Customizing application allows external numbers to be issued for the warehouse number."
So does this saying that external number assignment is not possible? Or is it saying that I have to use internal range even for external numbering? What is the solution?Please have a look at OSS note no. 14881.
Best regards,
Christiane Schnellenbach -
Report for Org units with no positions
Hi
I am searchign for a report through which I can find all org units whcih have no positions assgiend.
Please suggest.
Thansk
Regards
RKGSAPHI,
follow the path -
SAP Easy Acces->Human Resources->Organizational management->Info system->Organization Unit->Organization Structure
Here you have the SAP query, execute the one that ftis in your requirement.
Also check the same in the Position node. Explore the 'report Structure' node as well.
Thanks & REgards, SWapnil Mishra -
Number range for process order - Bulk and Filling.
I was trying to configure the Process order number range based on order type. In the IDES/ development system, some of the number ranges are pre-configured and already in use. Even the '+' green sign at the top is missing.
I tried with 'CORN' and then selected the order type and the Number Range General at the very bottom.
Help is appreciated and will be rewarded.
For example: The FG process order to have 1xxxxxxxxx, bulk: 2xxxxxxxxx.
Thnx!
Abhi.Number Ranges
Assigning number range
There are two types of number assignment:
Internal
When saving a data record, the SAP System assigns a sequential number that lies within the corresponding number range interval.
External
When saving a data record, either you or an external system assigns a number. You need to ensure that the number lies within the corresponding number range interval.
Example
Co82 let us say order number range maintenance
let us say you have created a new order type oen for FG and one for bulk and you want to assign a new number range
In CO82..
Menu path Group -->maintain
In maintain number range group screen,
Group --> insert
Give text and from number and to number
say text = new order say For FG
range - 1xxxxxxxxx to 1999999999999 (tick ext check box if the range is external number range-manual input)
click on +
You can see your group at the end of list
In Not assigned group your new order type will be present
Place the curser on that order type and fallow the menu path as below
Edit -->select element
Select NEW order number range group check box
edit --> assign element group.
Now the number range is assigned to the new order. Save it, You will get a pop up, just ignore it.
I hope it will help you
Same thing yoyu repeate for Bulk -
Set Up number range for OM Objects
Hi All,
I have set up Ext number range for Org Unit & Position.
example: Org Unit 50000000 - 599999999 and i have uploaded data till 50000999.
so it should be update current number as 50000999.
but in my scenario its not updating current number still is '0'
Please help me.
regardsHi Waseem
I am agree with your reply as I am doing the same thng. Currently I am using External Number Range as I am going to upload data and later will change into Internal.
but my question is in Number Range Maintanace in Current Number should be update automatically or not.
Example Org Unit from 500000000 - 59999999 and we uploaded data till 50000900
so in Current it should show 50000900
NO From Number To Number Current Number EXT
EX 500000000 59999999 0
but in my case it is showing '0' in current number
so Please confirm me whether it should update automatically, if yes pls tell me how
regards, -
Number range for Object (Organizational unit, Job, Position)
Hi all,
How to maintain number range for Organizational unit or Job or Position by Company Code or PA, EG, ...?
Thanks,
QuangHi,
For organizational objects maintain number ranges via OONR.
e.g. In order to maintain number range for C - Job object in plan version 01 add the following line to OONR:
01C IN EX
Then select this line and hit "Number range maintenance"
There create the interval you want.
(EX 60000000 69999999)
For PA, EG there is no number range maintained.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Jan 14, 2010 8:08 AM -
Change in number range for Job Family
Hi,
We have a requirement where we need to change the existing number range for object type Job Family.
The number range begins from 500* series. Now this needs to be changed to 90000000 number range.
Now the question is what would be the impact if we delimit the objects with earlier JF number range and
create the job families as part of the job catalogue with 90000000 number range.Hello,
Only difference/impact is you will get new number ranges only.
regards -
How to update BP number of an Org. unit in Org. Model?
Hi,
In Org. Model we have organization units which has BP. They are list together in couple. Can I update BP number of an org. unit in Org. Model? I want change it to another BP. Is that possible?
Best regards,
LongHi Long,
For each organizational unit created in the organizational model a business partner is generated automatically. This number range that will be used for creating a org unit can be defined.
If you are looking forward for creating a Org. unit with a specific number range, please following the below mentioned steps:
Step 1: Defining Number Range for Org Business Partners
Goto transaction BUCF or SAP CRM IMG Menu: SPRO-> Cross-Application Components ->SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings -> Define Number Ranges
Choose Change Intervals
Choose Insert Intervals
Assign an interval you need and provide values for the field No., From number, To number, and flag 'X' in EXT. if external number range is required.
save your entries.
Step 2: Defining Groupings for Org Business Partners
Goto SAP CRM IMG Menu: SPRO ->Cross-Application Components -> SAP Business Partner -> Business Partner ->Basic Settings -> Number Ranges and Groupings -> Define Groupings and Assign Number Ranges
Choose New Entries
Enter Correspoding values in field
Grouping: for ex. Z4
Short Name: for ex Org BP
Description: Give some description
Number Range: Provide the number range defined in the previous step
save your entries
Step 3: Set up integration
Activate the integration of organizational units and business partners and assign the number range defined in the preceding sections.
Go to IMG: SPRO ->Customer Relationship Management -> Master Data -> Business Partner ->Integration Business Partner Organization Management -> Set Up Integration with Organizational Management
Enter the following values for the existing combination of Group and Sem.abbr.:
HRALX-HRAC - X
HRALX-OBPON - ON
HRALX-ONUMB - 2
HRALX-OSUBG - Enter your Number Range defined in the previous steps here.
save your entries.
Step 4: Execute Report for Changeover Classification
Execute the report CRM_MKTBP_ZCACL_UPDATE_30 in transaction SE 38.
I hope this will help you
regards
Srikantan
Maybe you are looking for
-
I am trying to install the cs5 upgrade on my new laptop, however, I cannot locate my cs4 program to install first. Am I out of luck?
-
Aggregate function for a report that has sets
My report combines similar analysis into sets. I need to apply aggregate function such as Max() to the resulting columns. I tried but Analytics doesn't like that. Can someone tell me if this is supported or not? If not, what would be a workaround?
-
Hi, My following statement does not return anything. Can someone help me to find my mistake pl? l_level is a varchar2(2) variable. It holds value '3'. SELECT value FROM tab_value WHERE TRIM(pcode) = DECODE(TRIM(l_level), '1', '031', TRIM(l_level), '2
-
How to change the color of JTextField
how can i change the color of JTextField
-
Computer Gone Haywire- Please Help
So, I just got a macbook aluminum 2 weeks ago. 2.4 Hz, 4G RAM. This is my first apple product. I switched from a PC/windows laptop because I believed that apple makes a better product and has less problems than a PC. During the last 2 weeks I unexpec