Number range for production order is running out! Please help..

Hi,
Our number range for the production order is running out, can anyone please guide me how to extend or create a new number range?
I try to go to CO82, there is no where for me to add a new range. Also, I can't extend continuosly the number range cause the next number already assigned to another order type.
What can I do?
Kindly please help. Thank you.

Hi,
All i would suggest before fixing on the number of digits, look at your past pattern. Estimate the number of orders which you plan to create for a given order type, based on that select the number of digits.
Now if you wish to increase from 7 to 8, its fine, it will not be an issue, once you define the number range, system will throw a message if it overlaps, so you can be rest assured about that. Assign the new number range to the order type & standard SAP will take care of the rest. However if you have any custom reports / developments, just ensure that there is no hard coding to read only 7 digits. Apart from that it should work fine.
Hope the above resolves the issue.
Regards,
Vivek
Added
Please do not amend the existing number range or do any modifications to the same, it will lead to inconsistencies. So create a new range & assign the same to the order types
Edited by: Vivek on Mar 13, 2009 10:43 AM

Similar Messages

Plantwise separate number range for Production order

Hello SAP Expert,
I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
Please give way to do this.
Thanks in advance.
Regards,
Yogesh.

Hi,
As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
Regards,
Dhaval

Number range for Production order

Dear All SAP PP Gurus,
I am new to SAP PP and want to learn about number ranges for production order.
Can anyone tell me step by step procedure for creating & Assigning
number range.
Thanks in advance.
Regards.

Hi MIHIR,
I just chkd the blog spot of MR Siva.
It is very much self expalnatory.
Siva ,pls update more documents in ur blog,it is very much helpful
THNX all

Number Range for production order / Planned order

Number Range for production order / Planned order depends upon what?
Plant, order type, mrp controller??

Dear,
Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
Planned order :- Plant specific OPPQ or OMI2. Number ranges for Manual creation - OMI3
Hope clear to you.
Regards,
R.Brahmankar

External Number range for Production Order with additional logic

Hi gurus,
My requirement is -
I have two products - for my Local and Export
I have made two Order type for local and Export - say LOCL and EXPO
My LOCL order no will start with L and EXPO with E
I can do this with external number range set for each order type..
Now my question is -
My client wants Production Order in this fashion -
L20111------
L is local, 2011 is year, 1 is jan (1 to 9 - Jan to Sept, A - Oct, B- Nov, C - Dec) followed by a serial number
How can we address this in SAP?
Any clues?
Thanks for your suggestion in advance.
Regards,
Srinivas

Hai,
You need to use User exit for this. kindly contact your ABAP team.

Number range for different order types

hi
pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
thanks and regards

Dear ,
Goto CO82 ,
1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
Revery back if u need any help
Regards
JH

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

External Alphanumeric Number Range for Internal Orders

Hello,
I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
Any help will be appreciated.
Thanks.

how many do you need?
Just one, that covers all?
a0000000 - zzzzzzzz

Number ranges for purchase order in SUS- why?

Dear Gurus,
In SPRO settings, I have seen the option for defining the number range for purchase order in supplier self service system. similarly, there is an option for defining the number range for purchase order response.
Why do we need to define the number range for purchase order and its response in SUS system? In SUS system, the purchasing documents from SRM and MM system create corresponding Sales Order and its follow-on document. So, we need to define the number range for sales order not purchase order.
In spro documents, it says you need to define the number range only if you create purchase order locally in SUS.
What does it mean?
regards,
Ranjan

Hi Ranjan,
Unfortunately in SUS, Sales orders are referred to as Purchase orders only. Hence any PO with a number say 450000000 that comes into SUS will have a corresponding number in SUS as 19000000.
Sam has already explained the PO response part.
Regards,
Nikhil

Number Range for Transfer Order

Hi,
When I create transfer order with reference to outbound delivery, an error message says "Maintain number range 01 for transfer order". I could see the number range 01 maintained in T- code SDPI. But I would like to know how we maintain number ranges for transfer orders and why this error message has come?
Thanks,
Betty

Hi
In-img-logistics execution-shipping -pickinglean ware house management--define control paramaters and no ranges for lean warehouse management
1.Here you will define the control parameters for lean warehouse ( no ranges too)
2.Define no ranges
3. Assign no ranges
Please check have you maintained entries for your warehouse here if it is lean
In img----logistics execution-warehouse management-master data--define no ranges
T code OMLW if it is central warehouse
Regards
Raja

Number range for Maintenance Order (IW31) - Any exit

Hi All,
I need to go for internal number overwite for Maintenance Order (IW31)for object AUFTRAG .
I am going to maintain ztable which contain order type and NRRANGENR.So,based on the ordertype i have to populate NRRANGENR in the exit.
Can you please tell me any exit or badi or through enhancement spot we can apply number range for maintenance order.
Thanks .
With Regards,
Ambrose

Hi,
Do you need an exit ?
You could create number range groups each with a specific number range. Then assign each order type to a particular group depending on which number range you want it linked to. If necessary have a different group for each order type.
Configuration can be done in transaction SNRO for object AUFTRAG.
-Paul
Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum (for PM/CS specific topics).

Different number ranges for same order type

Hi PP Guru's ,
Can anyone send me the user exit for the differnet number range creation for the same order type.
Same order type is used in two different Plants. So our client want to track the production order plantwise.
Thanx in advance.
Regards,
Nagraj

Hi Nagaraj,
The number range is defined at order type level ( i.e. client level)
So if you want to use different number range for different plant, then use different order type for different plants.
Thanks and regards
Murugesan

Number ranges for PM orders

Hello everyone
I have a question regarding number ranges, our PM orders are assigned to a number 5000000 - 5999999 and left with few more oders to run out, the next number range 6000000 - 6999999 and all other 7 digit number ranges are taken.
what do you think is the best way to get around this one?
I believe there is no way I can extend the current number range - if its possibe please let me know
Do I have to create a new 8 digit number range? if yes is there anyway I can make PM orders automatically pick it after the current one is exhusted?? Now that order types have been assigned to the current group/range how do I test the new one??
Regards
Sly

Arun
If I put a any number before my last number, it is going to increment into the already taken range. i.e if I put 5 before 5999999 to make it 55999999, the next number after 5999999 will be 6000000 which is already takeng, it would not skip from 5999999 to 56000000. isnt it??
if Im wrong please explain in details and how the logic works.
many thanks
Sly

Multiple number range for planned order

Hi,
I want maintain different number range for MRP related planned order and manual creation planned orders. I have checked OPPQ and OMI2 transaction but i could not get any clue to create different number range for same plant. Let me know is how we can create.
Regards / US

Hi Uma,
number range is dependent on plant alone and I don't think there is an user exit or badi to change number range at planned order creation.
I guess the alternative is an enhancement or using some other field to determine what planned orders are manual.
regards,
Edgar

Number Ranges for Service Order

Hi All,
I want to create no. range for service order.
Generated no. should contain plant code as well.
eg VSC00AA001
here V is hardcoded
SC00 is plant code &
AA001 is no. generated from no. range.
Pls. tel me how to proceed...
bye,
Pranjali

This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
Regds
Manohar

Number range for production order is running out! Please help..

Similar Messages

Maybe you are looking for