Number range for service master record

Hi..
i have an issue in number ranges for service master record.
when i create a service master record system is generating number ramdomly, its not in series..
where do i make the settings so that i will get service master number ranges in series...
Regards
Sarfraz

Hi,
Follow the path:
SPRO ->Material Management -> External Service Management -> Service master -> Define Number Range
In menu ->Group-> maination->Aagian Group-> Insert
Now Enter
Number Range Group Text     01( example)
From Number      80000000
To Number     89999999
& save.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Apr 4, 2008 8:45 AM

Similar Messages

Create number range for Service Entry Sheet (SES)

I would like it is possible to configure the number range for Service Entry Sheet (SES) or it is fixed in the system? Besides, for my current configuration, the number only appear when SES is done but no reversal number if I reversed the SES, is this a correct setting? Or is there any way I can set the number for reversal document?

Hello,
Check below SAP link.
http://help.sap.com/saphelp_40b/helpdata/fr/77/e12c7dd435d1118b3f0060b03ca329/content.htm
Hope it will help. Revert back if anyfurther question/s.
Regards,
Anup

Number Ranges for Purchasing Info Record

Dear Guru's
Number range interval for Purchase info record can be created and assign to group and there are two group for Stock and Non Stock materials.
Now my query is how the system pick the number range ??? Since we don't have any assignment like PR,PO
My requirement is we have 3 company code - I need to have different number ranges for purchase Info record for each company . Guide me to achieve ...
Thanks in advance
Regards
Anand

SAP has provided only Two standard document Types for Pur. Info Records.
IL for Stock Material ( with matl No.)
IN For material Group (w/o MMR).
By default, if you enter Matl No. in the initial screen, system automatically picks the doc. type IL and the no. range assigned to it.
If you're not entered matl. no. in the initial screen, and proceed the Transaction further, system picks the doc. type IN and prompts you to enter Matl Group.
In the second case, the system picks up the no. range as per assignment.
Here in your case, you want create a new no. range and assign to your IL/ IN.
For this, you go to the transaction Define No. Ranges in Inforecord, from menu bar, choose Group-> maintain. Here you maintain your new no. range with a name. Now your new group is created with your required no. range.
Then select your new group ( Check box), select, IL, and click assign button and save.. Your IL is assigned to your new group and system picks the new No. Range when you are creating a Inforecord with Mat No. Similarly, you can change No. range for IN also.
or one more option you have.
In the first screen of No. Ranges Transaction, select change intervals tab button, you'll be goto intervals screen. There, from Menu bar, choose Interval-> change current No. Then you reset your current no. to Zero, save it. The again choose Change Interval, then in that screen, change the Interval with your new no. range.
Here in the second case, u need not maintain new groups. Just changing the Interval for the existing group.
You can adopt any one of these options.

External number range for material master

Dear sap guru i want to create external number range for msterial master but i am facing problem .i used T.code MMNR but i am not able to tick external number small squar window . can anybody help me and tell me step by step
regards
rohit

Hi
In tcde MMNR select groups in the application tool bar a pencil like icon click that
Then go to group in the top menu bar
In that if you choose insert
Then a dialogue box will open
In that give text and
there will be two lines
First is for internal no range
second is for external no range with the check box ticked in grey
In that you have to choose the second one and give only the range interval
External tick is already there ready made in the system
If you are sure that your settings are correct in MMNR
IMG-L.G-MATERIAL MASTER-BASIC SETTINGS-MATERIAL TYPE---DEFINE ATTRIBUTES OF MATERIAL TYPES
in this choose your material type and click on its details
in the general data tab there is a external no assignmentw/o check a check box is there
Pls tick that and try to do your process by giving external no
Regards
raja
Edited by: ramanathan raja on Dec 4, 2008 2:27 PM

Different material document number range for Services

Hi,
I want to make different material document number range for services.
I have created ZE document type from WE .
But if I see group in OMBT , i am not able to assign ZE there. How to do this?
Regards
Kedar

Hello,
No ! I am not able to see ZE there.
Kedar

External number range for service items?

I want to create Purchase order with services using BAPI. Is it possible to set external number range for the extrow / introw, so that if I need to change a service line item, I will be able to find out which service item needs to be changed.

It depends on whether you have a service master or not.
1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
Makes sense?
A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
Regards,
Ravi
Message was edited by: Ravikumar Allampallam

Number Ranges for Service Order

Hi All,
I want to create no. range for service order.
Generated no. should contain plant code as well.
eg VSC00AA001
here V is hardcoded
SC00 is plant code &
AA001 is no. generated from no. range.
Pls. tel me how to proceed...
bye,
Pranjali

This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
Regds
Manohar

Number range for Technical Master Data in CRM

Dear CRM experts,
I am just wondering, do we need to maintain number range for both the product type "Material" and also "IS-U Premises" (Object: ISU_TMPVST) for Technical Master Data (Connection Object and Point of Delivery) in CRM??? That will be 2 sets of number range, am i correct?
Would appreciate your reply and points will be rewarded. Thanks!!

Hi Kevin,
Thanks a lot for reply.
Our requirement and priority is to avoid redundancy of data. Due to this, we wanted to replicate minimum data to CRM system from ISU.
I went through some of the notes on market place where it is mentioned that replication of technical master data is not mandatory. We have ISU and CRM RFC connection already established, still I'm not able to view ISU technical
master objects in CRM.
Having said that, I wanted to know, if we do not replicate the technical master data (Connection Object, Premise and Device data) to CRM, can we still carry out the ISU functionalities through webclient interface? Or, am I missing any further configuration settings, to make use of technical master data in WebClient screen.
Please advise.
Regards,
MV

External Number Range for Customer Master

Hi,
If we give External Number Range for a Customer Account Group in SPRO, Can we let the System to generate the Customer Number(Internal)? Or always we should provide a Number for the customer?
Thanks,
Sekhar.J

Hi,
System will not consider two Number Range Assignment, simultaneously.
Here are few links:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9b191455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/53/c9864aca3711d2b494006094b9114a/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/ea/cffb3aebc63b61e10000000a11402f/frameset.htm
Best Regards,
Amit

Number range for service desk

hello,
i have some questions regarding number ranges:
which are the default number ranges groups?
what number range should i use for service desk?
thx

Hi Galan,
I'd post the answer but the forum nanny is saying I have posted forbidden words and phrases. Even though it was just a frew quick sentences.
Forum Admins, can we get this thing removed? It's annoying and bever tells you what is flagged.
Jason

The external number range for Equipment master

Dear Experts,
My client has requirement to use KKS code as Equipment number as they want to create Notification and Maintenance order using the KKS code.
For example 10H, 10BEB, 20BHB04, 10LBG10AA001, 10HLA13AA001A, 10ETG10AN001-E etc.
All these KKS codes has different character length hence it's not fit in any number range.
can anyone suggest the external number range that I can use for above requirement?
Thanks.

Parag,
I have checked again. It is working correctly. Remember that the following setting the check box below the column A should be empty. This allows Alphanumeric characters in the numbers.
SPRO Path to above setting
My Equipment category of External Numbers is 'A'.
KJogeswaraRao

Service Master Record

Hi everyone
I want to create a Template for Service Master Record number range (Activity number)
E.G. - XX.YY.ZZZZ.
I know that for material master it can be done by using a special template
can someone help me with this issue
if there is any FM that can check that only Service Master Record in this template will be accepted

Hi Aviad Barchad,
T-code- ACNR.
click on Groups. and insert new group with you are Number range either external or Internal number ranges .
Now add the service category elements to the group
Example:
Create Activity 01 Group.
Thanks & Regards
Venkat.

Mass Change for Service master

Dear Experts,
I've tried to do Mass change for service master.. in transaction MASS, i couldnot able to find the object for service master there..
Is there any possiblity to do mass change for Service Master
thanks

Hi,
I have tried ur scenario. Mass change for service master was possible using the TCode: MASS. But if u go to the Tcode:MASS, system asks object type. object type for service is not available in the match code/input help(F4).
At any time, if u want to know the object type for any transaction , goto the Tcode: SW02.(path: SAP Easy access: SAP Menu->tools-> ABAP work bench->overview->business object overview( SW02).
click on materials mgmt.-> external services mgmt.-> service master ( in the tree list).
Object type for service master: BUS1005
this business object is useful for list display for service master records(get list), read detail data for a service master record, create& change service, display object, check existance of object.
object type for attributes in service master: IFSAP
reference table: ASMD
goto SW02, to find object type for any transaction.
i think this information is very useful to u.
reward me according to ur uasge of this information.

Creation of Service Master Record (Furniture and Fixture Maintenance)

Hi,
I want to create a Service Master for "Furniture and Fixture Maintenance".
What should I keep in mind while creating a Service Master Record.
Would like to know the about the following fields which seems to be useful:
Activity Number:
Base Unit of Measure:
Material Service Group:
Division:
Valuation Class
Service Type
Is there any other fields which I should keep in mind.
Regards,

Thanks Murgun for the reply.
Sorry for late response from my side.
1. What is use of Service Category. Do we need to use the default or we need to configure as per our requirement.
2. while creating Service Order, we need to enter Single Short Text in Item & Multiple Short Texts in Item Details. What is the actual use of providing Multiple Short Texts in Item Details.
3. Can we use the Service Master in both in Item Short Text & Item Details Short Texts.
Regards,

Number Ranges for the Serial Number Profiles

Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.

Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

Number range for service master record

Similar Messages

Maybe you are looking for