Number range for trans./event type WA in year 2014 does not exist
Dear,
Member As I am unable to post goods receipt through MB1C.
Error coming-Number range for trans./event type WA in year 2014 does not exist Message no. M7562.
I have gone through below thread, but still not resolving.
In OMBT initial screen, clicked on Group button with pencil figure.
There, selected Material documents for goods movements and inventory diffs.
WA WH WI WL WQ WR WS WZ.
There, I have put 2014 and simply copy the number range 4900000000 - 4999999999 with current number as 0.
I have gone through the previous thread but not yet got solution.
Thanks & regards,
Supriyo
Welcome to the forum. As a new member, I would like to inform you that there are certain rules and regulations applicable to this
forum which you can find to your right screen where it has also been indicated that posting basic / repeated query is not allowed. Please search in this forum or Google it with the same text, so that you will find many threads discussed on the same topic. Take the inputs from there and update still if you are not able to resolve. Meanwhile, this thread would be locked.
G. Lakshmipathi
Similar Messages
-
Dear Sap experts,
Please advise me that at the time of release service entry sheet then error come like 562 number range for trans/event type we in year 2012 does not exist....
Please advise me that what is the transaction codes.
Thanks
Mohit
Edited by: Csaba Szommer on Oct 18, 2011 2:28 PMHi,
Go through the below link.
http://help.sap.com/saphelp_40b/helpdata/en/6d/e12c7dd435d1118b3f0060b03ca329/frameset.htm
Regards
Ram -
No range for trans/event type WA in year 2011 does not exist
Hi, All Gurus
while posting goods in MB1C,getting error 'No range for trans/event type WA in year 2011 does not exist'
while doing PGI,getting error 'No range for trans/event type WL does not exist'.I'm getting trained in IDES system.
Plz help me..
From
MVRHello,
And welcome to SAP SDN
System asking Number range for trans./event type WA for year 2011, as it not maintain in the system.
Now 1st set u201CWAu201D document type for material document & then u201CWAu201D document type for accounting document
Set for WA document type for material document
Use TCode: OMBT
In the Menu Click Group - maintain - again click Group-insert - Number Range Group Text (new material document)
& then enter
Year_From Number __ To Number.
2011_100000000____ 199999999
And now
Double click "WA"
and select check box of your "Number Range Group text of new material document
"and click Element/Group in the Application Bar ( you can see WA is assigned to Number Range Group text ) and Save.
Now use t.code: OMBA
Click u201CGoods Receipt Document Typeu201D
Next screen assign u201CWAu201D document type to t.code MB1C and save.
Set for WA document type for accounting document
Again Use t.code: OMBA
Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
Now in next screen, click u201Cinsert intervalu201D
& then enter
Number range number__Year____From Number____To Number.
10__________________2011____200000000____ 299999999
And save.
Now again use t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWAu201D and you will have new screen and enter Number range u201C10u201D and save.
Similarly for WL
In t.code: OMBA check under automatic movements doc type for TCode VL01, VL01N, VL01NO, VL02,,VL02N,,VL03N, VL07, VL08, VL09, VL32, VL32N,,VL33N, VLMOVE, etc
Now, Set for WL document type for accounting document
Again Use t.code: OMBA
Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
Now in next screen, click u201Cinsert intervalu201D
& then enter
Number range number__Year____From Number____To Number.
20__________________2011____200000000____ 299999999
And save.
Now again use t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWLu201D and you will have new screen and enter Number range u201C10u201D and save.
If you still face the any issue. Do revert back
Thanks & Regards
JP
NOTE KINDLY SEARCH FOR THE ERROR< BEFORE POSTING QUERY ON SDN -
"Number range for trans./event type WV in year 2014 does not exist"
while doing PGI i am getting error as "Number range for trans./event type WV in year 2014 does not exist"
Thanks,
RohitWelcome to the forum. As a new member, I would like to inform you that there are certain rules and regulations applicable to this
forum which you can find to your right screen where it has also been indicated that posting basic / repeated query is not allowed. Please search in this forum or Google it with the same text, so that you will find many threads discussed on the same topic. Take the inputs from there and update still if you are not able to resolve. Meanwhile, this thread would be locked.
G. Lakshmipathi -
Number range for trans./event type WA in year 2011 does not exist.
hi experts while stock posting iam facing this problem kindly guide me
Hi akreddi,
Please search the forum you will find the answers before posting the thread
Number range for trans./event type WE in year 2011 does not exist
no range for trans/event type WA in year 2011 does not exist
Regards
Pradeep -
MIGO -Number range for trans./event type WE in year 2012 does not exist
Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022 Material documents
u2022 Reservations?
Thanks in Advance
RajeshHi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!! -
Number range for trans./event type WA in year 2010 does not exist
Dear Sir,
when i used t-code mb1c to initiate the stock, it occured this error message 'Number range for trans./event type WA in year 2010 does not exist'. i've used t-codes(OBMT,FBN1,OBH2), but it still doesn't work. can you tell me how to solve this problem, please? thanks! the detail error messages as below:
Number range for trans./event type WA in year 2010 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2010 for the transaction/event type WA.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
Material documents
Reservations?Follow the below instruction as specified in note 370236.
Maintain the number range intervals in Transaction OMBT or in Transaction SNUM. For every interval of the previous year, there should exist an interval with a year specification that is larger than or equal to the current year.Then assign the interval to a number range group.
The attached analysis report 'ZNRIVCHECK' carries out the following check:
If the year and the document type are entered, the report checks whether an interval exists for the document type and for the year.
If the year is entered or the year and the number range object are entered, the program checks whether the intervals of the previous years exist for all of the year-dependent objects in the specified year.Check whether intervals are needed for all entries of the results list and whether the interval was assigned to the number range groups.
thanks
G. Lakshmipathi -
Number range for trans./event type WE in year 2011 does not exist
hi gurus
when am trying to post GR it showing me the following error 'Number range for trans./event type WE in year 2011 does not exist' please help me.Hi,
Go to OBA7 and select the transaction event type WL and maintain number range for the year 2011.
Please check and revert.
Thanks
Hrishi -
Number range for trans./event type WE in year 2008 does not exist ?
Hi,
When I post goods receipt ( MIGO) I got the error :
Number range for trans./event type WE in year 2008 does not exist
When I modify with OMBT ==>
1999 0002000000 0002999999 0
2008 8000000000 9999999999 8000000000
But I still get the same error , So Could you please help me this ?
ThanksHi
With the present settings, you can post the docuemnt in the year 1999 witout any error. But, if your requirement is to post to the current period then you have to maintain the company code for materials for this period.
To maintain the company code, go to transaction MMPV and enter the company code as 0001, posting period as 05 and year 1993. Once the transaction is complete, again enter for 06/1993. You need to execute the transaction month wise from 05/1993 to 06/2008.
Alternatively, you can create an LSMW for the same and maintain the company code.
Finally check whether the period 06/2008 is appearing in OMSY transation.
Regards,
Sunil.K -
Number range for trans./event type WA in year 2006 does not exist
hi
while posting stock in MB1C screen the following error has been faced by me, i hope a answer from any one of u.
thankyou
venuprasadHi Venu,
In the sytem there is no number range assignment for event type WA (Goods issues)in the year 2006. In SPRO -- Materials Management -- Inventory Management -- Number ranges for material documents -- Number ranges for Goods Issues/transfer posting -- For WA insert year 2006 and assign the number range for the year 2006.
Number ranges for material documents will be maintained year wise.
Hope this clarifies. If you have any issue. Post it back.
Thanks,
Viswanath -
Number range for trans./event type WA in year 2011 does't exist
In SD integration,
am going to MB1C after maitaining companay code , plant , sloc. system asking "Number range for trans./event type WA in year 2011 does't exist"
kindly help me
Edited by: akreddi on Dec 6, 2011 6:02 AMDear akreddi,
Please check the forum before posting the issues.
You will find the details on how to maintain number range for material documents by searching the forum.
If you do not get a solution, then post the issue.
Always try to follow the forum rules.
Thanks & Regards,
Hegal K Charles -
Number range for trans./event type WA in your 2011 does not exist
Hi,
I am getting this error while creating stock
number range for trans./event type WA in your 2011 does not exist... already checked with tcode OMBT, OMBA, and also serach column there also nobody has given proper details.. can anyone help me for thisAre you practicing on IDES server?
Anyways, the Number Ranges for your FI document WA is missing for Year 2011.
Follow this:
IMG - Financial Accounting (New) -Financial Accounting Global Settings (New) - Document - Document Types - Define Document Types for Entry View
Here check the Document Type WA, note the number Range assigned.
Now go to
IMG - Financial Accounting (New) -Financial Accounting Global Settings (New) - Document - Document Types - Document Number Ranges - Documents in Entry View - Define Document Number Ranges for Entry View
Here create Number Range for Year 2011 for your Company Code.
Then assign the Number Range Key to to the WA Document Type Above.
You can also Copy the Existing Number in Document Type to Year 2011 in Copy to Fiscal Year IMG link.
Also request you to close your previous threads (questions) on time.
Hope this helps,
Thanks,
Jignesh Mehta -
Number range for trans./event type
Hi,
While doing goods receipt using T code MB31, I am getting a following error
" Number range for trans./event type WF in year 2010 does not exist"
I have checked and assigned all the number range but still the problem exists and I am unable to do the GR.
Please let me know what should I do to resolve this.
Regards,
PavanHi,
By using t code OMBT check in Group whether you have assigned number range for year 2010
Number Range Object Material document
Grouping..........
Phys. inventory documents
IB ID IN IZ WV
Material documents for goods movements and inventory diffs.
WA WH WI WL WQ WR WS WZ
Material documents for goods receipts
WE WF WO WW
Inventory sampling procedure number
SI
Regards,
Sanjay -
No. Range for Tarns/Event Type
Dear Sirs,
While posting the material using MB1C -
Message displayed
Number range for trans./event type WA in year 2008 does not exist ?
Have checked the fiscal year variant and posting periods.
I would appreciate for the earliest help.
Regards,
Anil Kumar.BHi Anil,
Go through the transaction MMPV m, I hope it will solve your issue.
Regards,
Murali. -
No. Range for trans./event type WE in the year 2009 does not exist..
No. Range for trans./event type WE in the year 2009 does not exist...message.No.7562.....
this error came when i try to post good receipt thro' PO...
help me..
thanks in advance...
Edited by: venkateshnov14 on Nov 12, 2009 12:01 PMHi,
Set number ranges for WE in following path for Accounting document & Material document
SPRO --> materials management --> Inventory management and physical inventory --> Number range assignment -->
under this path you can maintain number ranges for accounting documents and material documents.
1. Accounting documents (OMBA)
2. Material documents (OMBT)
Regards,
Biju K
Maybe you are looking for
-
Mac keeps crashing and I see this report,can anybody help me?
Interval Since Last Panic Report: 643482 sec Panics Since Last Report: 1 Anonymous UUID: 580B87A0-8FAA-4070-8C97-FF1261C02818 Tue Jun 14 13:53:47 2011 panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x0017f403, type 14=pag
-
How to have RAC accept Forms and Reports connection to non specific node?
Hi all, I have posted this in the Forms forum w/ no result, hoping someone here can help; Oracle Forms and Reports services, not the entire app server. Version 10.1.2.0.2, one server Oracle database, RAC Version 11.1.0.6.0, 3 nodes Instance=RMSTEST N
-
Good Morning I have noticed on my billing emails over the last few days that I have been charged twice for the same app? Any suggestions? Cheers
-
Custom BitmapButton class remains invisible!!!
I 've created a class BitmapButton: package com.myscripts{ import flash.display.Sprite; import flash.events.Event; import flash.events.MouseEvent; import flash.display.Graphics; import flash.display.Bitmap; import flash.displa
-
Apple 17 Studio Display on Dual 2.7 G OS 10.4 G5
What do I need to connect my two Apple 17" (ADC)Studio Displays on my Dual 2.7 G OS 10.4 G5? Just buy two Apple DVI to ADC adapters ($99)? Any caveats? Thanks.