Number Range for Warranty Claims

Dear Experts,
I am trying to work out with SAP warranty claim processing, I dont have any idea of warranty claim processing provided in SAP, I have gone through the SAP library and Best Practices, and trying to go through.
But I strucked up @ the initial stage itself. I have assigned my username through the T Code WTY_UPROF, then trying to create a warranty claim through T Code WTY.
I have mentioned the warranty claim type as precediting then clicked on create warranty claim. system is giving a message : "For object WTY_CLAIM , number range interval does not exist".
Then I tried entering an external number WTY1 then clicked on create, this time system giving another message " Number WTY1 lies outside number range validity area"
When I go through the help of the system message it is as follows:
*"For object WTY_CLAIM, number range interval does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:"*
System is not even giving the T code for proceeding further.
I have checked in SPRO for warranty claims number range, but couldn't find it out.
Please help me in this regard.
Where should I make the settings?? And What all other settings to be done for Warranty Claim Processing, creating, processing and Completing.
Please give me in detail information if possible.
If anybody has the document also please forward it to me
Thanks in advance,
Regards,
B. Praveen.

Dear Keshav,
Thanks, I found that and went to Number Ranges, but system still giving error message to maintain the number range.
"System error during group maintenance".
When I click on help of the error message it is as follows
System error during group maintenance
Message no. NR899
Diagnosis
The system has identified an inconsistency in the tables for number range maintenance.
System Response
Program termination.
Procedure
In most cases, you can overcome this by executing the report RSSNR0T1 (Consistency check and repair of number range intervals). This report lists the inconsistencies and eliminates them (with F11 = "Confirm").
Why this message is coming?? and what is the solution for that?? Is there any config missing for that??
Please help me out.
Thanks and Regards,

Similar Messages

Define Number Range for Reference Number

Hi all,
I am trying to maintain Different Number ranges for Loans in ESS.
Once i maintain Define Number Range for Reference Number in Loans ESS and trying to raise a new loan from ESS is till see that the ref number is still displayed 0 while raising the New Loan.
No From Number To Number
10
I maintained range for number range number 10.
Pls suggest me on this.
The above scenario works for claims but not for Loans
Regards
Vijay

Solved my self...!

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

Excise invoice number range for Depot

Hi All,
Pls guide me to assgin excise invoice number range for Depot.
My client asking me to assgin domestic and export excise number range for Depot.
pls clarrify:
What are the purposes of the number range objects J_1IEXCLOC and J_1IEXCINV? In which conditions
1. either of the two, or 2. both the objects should be used?
Thanks,
Muru..

Dear Murugan
Please search in forum you can have ready made answers available.
System will always assigns one number for excise(where user can use Official document number) also an internal number for statistical purpose.(internal number for excise)
You can see all these numbers in tables J_1IEXCHDR/J_1IEXCDTL.
Just enter one excise Invoice number in the above tables & compare these with the objects J_1IEXCLOC/J_1IEXCINV...you will get more clarity
Hope this helps.
Phanikumar

Sales /Outgoing Excise Invoice number Range for J1IIN

Dear Gurus,
We are doing STO from excisable plant 1000 to plant 1100. We created a PO with document type UB ( STO) and created delivery with reference to PO and created billing document ( delivery challan). Against billing document number we created sales excise invoice in J1IIN for financial year starting from 1st April 2010. In J1I9 we have maintained number range for 2010 financial year in object J_1IEXCLOC for respective series group s1.Still when the outgoing excise created, the system continued last financial years number range. In entire flow from PO till MIGO and billing document and creation of excise invoice the input date is 6th of April i.e. current financial year. This is our first sales outgoing excise invoice creation in new financial year for which number range is maintained properly.
My question is why system took last financial years number range even though the date in all the documents is falling in new financial year.
Will appreciate the answer.
Thanx in advance
Regards
Nilesh

RESOLVED

Excise Number Range for Object J_1IEXCLOC

Dear All ,
I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
Regards,
Swapnil Vaidya

>
swapnil vaidya wrote:
> Dear All ,
>
> I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
>
> Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
>
> Regards,
>
> Swapnil Vaidya
It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
Regards,
Aroop
PS: Your question is more relevant for SD than MM.

Excise number range for 2009

Dear All,
I work for Indian client...
I have maintained Number ranges for excise invoice as follows...
NO-YEAR-FROM NUMBER-TO NUMBER-CURRENT NUMBER
01---200800000000010000004999--64
I want the Number to be continued for 2009 also.
For eg, if the last number in 2008 is 64.Then next invoice in 2009 should be 65.
Now my doubt is, For 2009, what should i do ?
Will system cosider the same range for 2009 or Should i maintain no range for 2009 ?
Regadrs

Hi
System will not consider the same number range for 2009. You have to maintain this for 2009 too.
If you want to continue the same number range then you have to maintain it as below. This is only required only if you want the number to be continued in the 2009. Else you can set the status as 0 instead of 64.
01---200900000000010000004999--64
Also the number range from 1 to 64 for will not be reflected in year 2009. It will be reflected in year 2008.
Regards
MBS

SAME NUMBER RANGES FOR DOMESTIC AND EXPORT INVOICE

Dear All,
We have maintained Two objects separately for Exports and Domastic sales invoices which is inturn giving two different number ranges.
But our client needs same number to be continued for both.
For eg: 000001 . 000002 and 000003 is the number range for domastic invoices for Export invoice 00004 should come. now as we have maintained different objects Export invoice is starting from 00001.
Our client does'nt want to maintain separate number ranges for Exports and Domastic, same number range should be there for both which should follow continues numbers.
Please suggest me on this at the earliest.
Regards,
Jay

Dear Jay
Assuming that you are asking about Excise Invoice number ranges, please do maintain Numbers for the Object: J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Same Number Range for OTHR and DLFC

Hi All,
I want to know whether we can mantain different number range for OTHR and DLFC transaction Type for same Series Group.
i.e for Returns Vendor Delivery Excise Invoice(MM side-OTHR) and Outgoing Excise Invoice(Sales Side-DLFC).
Pls guide me..
With Regards
Azeez.Mohd

even when you sell SFG / Trading goods -( HAWA / HALB) , then also you have to update RG1, though they are not FG materials.
Material type in terms of excise, but not in terms of SAP.
eg:
When customer returns the goods, you can process it in 2 ways-
either by creatign Excise JV - J1IH
or by following MM route, nothing but by creating Incoming excise Invoice wrt:inbound delivery-LR in Tcode:J1IEX-
where in excise tab, material type will be defaulted as "F-RG1", but it has to be changed to "Raw Material".
similarly, Vendor returns also treat as the same,
for your info, adjustment of excise duty for vendor returns will be routed through excise JV in J1IS & mov type:122 -ret to vendor is activated for RG1.

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Number range for Goods receipt against Purchase order

Hi All,
Please help me with the transaction code of creating new number range to receive goods for the new year.
Message is Number range for trans./event type WE in year 2010 does not exist
SAPXPT

OMBT click on the groups button, select the
Material documents for goods movements and inventory diffs.
WA WE WF WH WI WL WO WQ WR WS WV WW WZ
And then select the maintain icon, you need to maintain the number range
for the year 2010.
ands OMBA for accounting finance doc number range
hope this helps

Number Range for Warranty Claims

Similar Messages

Maybe you are looking for