Number range in Solution Manager 3.2

Hi ,
we are using solution Manager 3.2 with oracle 9i and Bi 7.0 (development)
While we raise Solution Manager Ticket from BW Development system,it is
not mainatainig the proper sequence number(number range).Rest all other systems are maintaining it properly.Recently we have upgraded the Support Pack for that BW Development system.its seems like issue is happening after the SP upgrade.
Please guide us to resolve this issue
thanks in advance
George Varghese

Hello George,
The best possible thing for you now ( assuming that everything was working absolutely fine before the upgrade and that you now continue to have no issues with raising tickets in other satellite systems ) would be to find out the side effects of the SP applied..... or may be look for notes resembling your problem.....
SAP Marketplace is one the one you must look upto.....In the meanwhile just raise an OSS for the same..
Inspire ppl by rewarding..
Regards,
Anand.....

Similar Messages

How to change number range in solution manager

Hi all,
Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
how/where can i change the sequence of the support messages(number ranges).
Thanks & Regards
Nick Loy

Hi Prakar,
Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
System is not allowing me to chagne the existing one.
now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
01 0000000001 0000999999 780
02 9999000000 9999999999 0 External
I want to change the message sequence starting from 9999000001 which is in extenal number range.
And one more thing, where can i find the number range which is being used for particular transaction?
can you help me how to change?
Thanks & regards
Nick Loy

Number Ranges in Waste Management

Hello EHS Experts,
I´m struggling with number ranges in Waste Management. Our client has the requirement to split number ranges for the different business partners in Waste: generator, disposer, transporter... but there doesn´t seem to be a way to assign different ranges to the different roles.
Do you know a way? Or the only possibility is to assign the same number range to all of them??
Thanks a lot!
Irene

Hi Vikram,
Thanks for your answer.
As far as I know Waste Generation / Disposal... refers to the combination of Waste Generator (or corresponding Business partner) and Waste Material, which you define when you assign the materials that are generated in one Production Site (Generator), materials that can be disposed by one disposer...
This is not what I´m looking for... what I need it to segregate Generator from Disposer, and from Transporter... the actual partners...
Thank a lot anyway
Irene

Number ranges in Loans management

Is there any function module available to find the number ranges in Loans management?
thanks and Regards,
Giri

best option is Search in SPRO
or else
FN-1 No.range: FVVD_RANL (Loan number)
regards
Prabhu

Number Range in Import Manager

Hi,
Can I create a field which is automatically incremented with a specified number range and which is not unique??
Regards,
RK

Hi Roman,
The problem with AutoId is its unique. But, I am looking to populate a field which is not unique automatically.
Regards,
RK

SAP HR - RP_PLAN alphanumeriacal number range in SNRO

Hi guys!!
I have an issue regarding number range in Organizational Management for SAP HR.
We have internal and external intervals and that's ok however, it's required to maintain external alphanumerical number range for positions, jobs and organizational unit.
I saw in the RP_PLAN details that element is SUBGR - NUM8.
Could I change this one to something like CHAR10?
Let me know about solutions and risks assigned to this issue, please,
best regards,
Sandra

Hi Sandra,
No you cannot change the domain to CHAR10 for technical reasons. So you will have to use 8 digit number for PD objects.
Kind Regards
Christine

EPSolman: Portal to Solution Manager

I am trying to integrate the Request Support" iView for Solution manager.
I have given the iview parameters as iven by note 658665
R/3 Installation Number of the Solution Manager
Portal DBMS short
Portal DBMS release Target R/3 Solution Manager version
the connection for MMC_SOLOMAN connector also works fine.
When i try to submit a query, it gives me the below error
Errors sending data from the portal to the SAP Solution Manager
Exception caught at onSendButtonClicked: null
can anyone help
Regards
Jayesh

Dear All
Please let me know if any one has treid integrating EP with Solution manager. (Request/ Iview )
Regards
Jayesh

NUMBER RANGES loans

Is there any function module available to find the number ranges in Loans management?
thanks and Regards,
Giri

Solved my self...!

Get number range by gtin

Is there any function to get number range by gtin number?
I know the webservice "GET_NUMBER_RANGE_IN" but it wants EPC number not GTIN or materialID*
how can i access Number Range for an device controller?
Thanks..

Hello Tuncer,
                  As you have rightfully pointed out the Web Service getNumberRange needs an EPC tag id.
Question 1:
So to suit your requirement there is a RFC Enabled Function module ie BAPI called
BAPI_AIISRV_GET_NUMBER_RANGE which generates a number range based on the actual objects
ie GTIN
    SSCC
    GRAI
    GIAI
    DoD
So since it is RFC enabled this BAPI can also be made as a Web service and used.
Question 2:
Why do you need to access the number range for a device controller on the first place itself. Number ranges can be managed at SAP AII level but i dont think so it is possible at the device controller level.
It will be the device controller which will be accessing the service from SAP AII to generate the number range. SAP AII does not have the capability to generate number ranges and block number ranges specific to a device controller. However i think this capability can be ABAP coded and developed.
Please revert if you have any other questions.
Thnks and Regards
Yogesh Bhatia
Edited by: Yogesh Bhatia on Feb 13, 2009 8:40 AM

Organizational Management- Maintain Number Ranges

Hi All
In menu path :
Personnel Management -> Organizational Management -> Basic Settings -> Maintain Number Ranges -> Maintain Number Ranges
I have maintained the number ranges as mentioned below
Job(C) 10000 to 20000,
Position (S) 20001 to 30000,
Org Unit (O) 30001 to 40000 .
After maintaining i have saved in a Transport Request .
Now am importing it in to the Quality . In Quality i am getting only the Objects Job , Position , Org Unit but the number ranges
maintained above is not imported .
Kindly let me know what is the problem .
Pls send me the solution how to transport the number Ranges .
I would appreciate for an earliest response .
Thanks in Advance

Hi,
Please check below SAP wiki link which will guide you and show different settings that may be required to accomplish along with issues you may face.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
Thanks,
Ameet

No number range found for 01 RP_REINR SP11--Travel Manager

Hi
While creating Travel request in in Travel manager i got this error messages"No number range found fo 01 RP_REINR SP!!-Travel Manager..Plse advice me how to resolve this..
Thanks&best regds
Shaila

In adition to task from Shailaja .. Consider this:
Please note that while defining your number ranges, the number must be two Digits i.e ( 01,02,03) , it must NOT be single digit i.e (1,2,3)..
I'd had the same issue, but with the two digits number it has been solved.
Regards,
Rodolfo

Mismatch in system number on Solution manager and SMP

Hi All,
I found System Id is different in Solution manager and Service Market Place. But where as System number is same in Satellite system and Solution manager. Because system is not same we are unable to send he solution to SAP. Please suggest how to make system id same on SMP and both satellite system and solution manager.
Regard's
Sai

HI,
Some what similar to thread .. How to change the system no | SCN

Batch management number ranges

Hi guru's
My client is using internal number ranges for my raw material
but now they want to enter external number at the time of Goods reciept
and also I want to make it mandatory for external number ranges.
that mean system is proposing me internal number ranges now
and user is updating external number ranges.
My issue is system should not propose me any internal number ranges
I want to update my external number ranges only
could any body help me to solve this issue?
which user exit i have to try or is there any other option?
Nilesh

Dear,
Set Up Customer Exits for External Batch Number AssignmentAs part of the external batch number assignment, the following two function module exits are available in the SAP enhancement SAPLV1ZE for checking a new batch number that has been entered.
EXIT_SAPLV01Z_003. Using this exit, you can replace the proposed number range object BATCH_CLT and/or external interval 02 with a number range object and/or external interval you have defined yourself.
You also have the option of suppressing the batch number check, for example, based on the material or plant.
EXIT_SAPLV01Z_004. Using this exit, you can define your own checking rule.
In this you write a code, if the plnat is so and so , then take this external number range, if youn want internal number range then use the following
You can use SAP enhancement SAPLV01Z for internal batch number assignment. This enhancement contains two function module exits that you can use to define number ranges or templates for batch numbers:
Goto OMCZ, Inactive internal no assignment for the batches.
Now in OMAD- Maintain no ranges for object- BATCH_CLT
Maintain external no range for that.
Please rfer this also,
http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
Regards,
R.Brahmankar

Conflict Issue in Number range and need solution

Hi
I am facing a issue in SAP Number range conflict. The case is like that
There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
We have fatch a conslodate list of all object in excel sheet.
OBJECT SUBOBJECT RANGE_NR YEAR LEVEL
Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
Number range are conflicting based on
1. Differences between number range intervals
2. Differences between number ranges levels
3. Differences between number ranges types (internal/external)
4. Number range overlaps are marked
pls just guide me approch for resolution menthods.
Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
Pls advice
regards
raj

Hi
I am facing a issue in SAP Number range conflict. The case is like that
There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
We have fatch a conslodate list of all object in excel sheet.
OBJECT SUBOBJECT RANGE_NR YEAR LEVEL
Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
Number range are conflicting based on
1. Differences between number range intervals
2. Differences between number ranges levels
3. Differences between number ranges types (internal/external)
4. Number range overlaps are marked
pls just guide me approch for resolution menthods.
Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
Pls advice
regards
vicky

Org. Management Number Ranges

Hi Experts,
When I creating new position number by using FM RH_OBJECT_CREATE in the program , I am getting the number range error.
We have define a new plan version for creating this new postions.
Is number range linked to plan version.
Regards,
IFF

Hi,
Whether number range is linked to plan version can be configured:
Chenk switch Number assignment for all plan versions: T77S0 ->Group:NUMRG Sem. abbr:COMP
If you set the switch 'NUMGR COMP' to 'X', you can assign numbers across different plan versions.
If you decide not to work with number assignment valid for all plan versions, you must create individual number intervals per plan version (and possibly also per object type). If you decide to use plan version- independent number assignment, you create number intervals that are valid for all plan versions. In this case, there is no danger of parallel number intervals occurring i.e. the same number interval for one object in one plan version and for a different object in another plan version.
In the standard SAP R/3 system, number assignment is not valid for all plan versions.
You can define number range in view T77IV.
Hope helps,
Chen Jian
Edited by: Jian Chen on Sep 14, 2009 9:33 PM

Number range in Solution Manager 3.2

Similar Messages

Maybe you are looking for