Number range in tcode OMH8

Hi all,
Please tell me that which number range we use to maintain in tcode OMH8. It says that its for service specification but what is this service specification exactly? I dont know what is service specification. Is it in service master or where?
Please respond.
Best Regards,
AI.

hi al,
Use transaction ML10 to create service specification.
Service specification can be also be created in the form of Purchase requisition. The document must contain the set of service specification listing the necessary services in detail. The details of service specifications can be maintained at item detail level wher u can enter description, qty, price and other details. We can summarize both service with master records and without master records in service specifications.
We can have a maximum of 4 hierarchy levels at outline levels.
Regards,
Nani.

Similar Messages

  • Service Entry Sheet & Accounting number range

    Dear Experts,
    While I'm trying to Release a Service Entry Sheet this error appear :
    +Error analysis+
        +Short text of error message:+
        +Document number ENR 5000000000 2010 was already assigned+
        +Long text of error message:+
         +Diagnosis+
             +Document number 5000000000 in company code ENR and fiscal year 2010+
             +has already been assigned.+
         +System Response+
             +Termination of processing.+
         +Procedure+
             +Check document number range 50 in company code ENR and fiscal year+
             +2010 and correct the number range status if necessary.+
        +Technical information about the message:+
        +Message class....... "F5"+
        +Number.............. 152+
        +Variable 1.......... "ENR"+
        +Variable 2.......... 5000000000+
        +Variable 3.......... 2010+
        +Variable 4.......... 50+
    I think t is related to the FI document that should be created from the Service Entry Sheet and the number range assigned for it
    Please Advice
    Best Regards

    Yes, it seems you are right. Check the current number ranges using TCode FBN1 to know the current status for number range number 50 for your company code. Material documents are not company code specific.
    To know the status of the document in the table, check table BKPF and read the table for your company code, year 2010 and document number 5000000000 to 5000001000 and check how many entries are already there. Change the status of the number range in FBN1 to a number higher than the max in the range (This may be done by FI consultant).
    Regards,
    Aroop

  • Number range creation for new service order type

    Hi,
    Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
    Thanks and Regards

    HI,
    You just define number range in tcode VN01, but remember that number ranges are not transportable.
    Once you define number ranges in development, do the same in quality & production client.
    Then attach number ranges in document type & transport this config to quality & production
    Please see that before transportating, the number ranges must have been created in quality & production thru VN01.
    Hope this helps you
    Regards
    Dhananjay

  • Number Range Issue-WIP

    Hi
    we are  doing WIP for production order executing tcode KO88, when
    executing this tcode msg says "Define Number range for
    settlement documents?, we created number range using tcode
    KO8N(Maintain number ranges for settlement documents) from
    number :0000000001 To Number 0001000000 current number: 0,after
    we completed number range creation, we tired to execute same tcode
    KO88 to run WIP but still we are getting same message "Define
    Number range for settlement documents". any patch to be applied here?, pls help
    thanks and regards,

    Hi Mr.Arthur Duman,
    <b>Plz check with T code SNUM - Number Range for Settlement Documents CO objects.</b>
    or else check with this menu path
    SPRO- Logistics Execution - Direct store Delivery back end-Route Accounting-Basic Functions-Number ranges-Maintain Number ranges for Settlement documents.
    If helpful reward points.
    Thanks & Regards
    Mangal

  • MIGO -Number range for trans./event type WE in year 2012 does not exist

    Hi  to all
    i got one erro while  going do MIGO , error is  
    Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is  WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
    Error Details :
    Number range for trans./event type WE in yar 2012 does not exist
    Message no. M7562
    Diagnosis
    The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
    Procedure
    Contact your system administrator.
    If you are authorized to do so, do you want to check the number ranges for the
    u2022     Material documents
    u2022     Reservations?
    Thanks in Advance
    Rajesh

    Hi Tej,
    Even I am getting the same error
    "number range for trans./event type WE in year 2014 does not exist"
    I have maintained the below number range in tcode OMBT,
    Am I missing anything?? Please help!!

  • Subject: Number Range interval deleted automatically

    Hi
    At the time of Accounting Document Posting system is giving error message for maintaining number ranges interval for the corresponding Number Ranges (For example: 50, 51, 49, 19) for the fiscal year 2010. But Number range interval has already been maintained in the Tcode FBN1 for the fiscal year 2010.
    After maintaining Number range interval again for the corresponding number range in Tcode FBN1, when we are trying to post accounting document system is again giving one error message that document number (5000000000) is already been used. When we are looking into Tcode FBN1 the current number status is 0.
    So to resolve this problem  we have to provide the Number range status into FBN1 manually (suppose if 10 doc are already existing in the system for number range 50 then we have enter the number range 5000000010 manually in FBN1).
    After Number range status setting in FBN1 System is allowing to post the Accounting Document.
    Along with this one more issue is appearing related to MM posting period. 
    The current posting period in the system is 08/2010 and the initial period in the system is 08/2007. System is automatically going back to the initial posting period 08/2007. After opening the Posting Period with Tcode MMPV we can post the document only.
    Both Issues are appearing repeatedly.
    Plese help
    Thanks..
    BRSR

    Dear If you have already maintained number range for particular period then again for same period and series system should not allow to maintain but as you said above it is allowed so i feel it was not done correctly first time and the given series number could have already been used so when changed the current number in status it's working fine.
    For  MM posting period issue please check transactions MMRV,OMSY,OMWD with your MM consultant
    Cheers
    KK
    Edited by: kiran kumar on Oct 19, 2010 8:32 PM

  • Business partner number range - Current number set to 0

    I need to initialize business partner number range.
    TCode: BUCF
    0009000000 -0013999000  Current number 9000029
    How can I set Current number to 0.
    I have deleted business partners via BUPA_DEL. I need this to be set to 0 so that can bring in legacy data in the desired number range.
    Any help is greatly appreciated! Thanks

    From transaction BUCF, if you select "Status" tab it allows you to change current number.
    Hope this helps!!!

  • Copy, delete, check personnel subarea and Number ranges

    Hi All,
    I am creating a new personnel subarea using copy the personnel subarea in enterprise structure definition.
    (Copy, delete, check personnel subarea)
    While doing this I am getting prompt about number ranges over writing issue.
    It seems that number ranges in production system may get affected due to this transport.
    So I am planning to note all the available number ranges in production system before transport and reset similar as earlier after the transport directly in production
    OR
    set number ranges in development similar in production then to transport to production.
    Please comment on the above approach.
    I am planning to check on the following number ranges only
    Tcodes u2013OONR ( for OM)  and PA04 (for PA)
    Can you suggest in case if any other number ranges to be taken care?
    Regards
    Thomas

    Hello,
    Do you have another option for the copy  : Copy (without reference) ?

  • Number range generation

    Hi All,
    I want to use number range generation (tcode: SNRO) for generating numbers for my custom database primary key purpose.
    Can anybody give me clear idea about number generation.
    Please help its urgent. .........
    Thanks in advance.

    Hi,
    by using SNRO you will have 3 options coming to u.
    By the 1st option, u can create the new interval range from sya 0... 99999 etc..
    Using second option, u can change the existing number range, incase the existing one gets exhausted by usage.
    By the trhird option, you can delete the existing number range..
    It's upto u you can decicde any number range.. One more point to notice is that you can have External & Internal number rnage assignment.. E.g., in case of MM Module, generally, the PO, RFQS, etc.. are generated by it own (i.e., the no is assigned to it once you save the new PO, RFQ etc...) Or otherwise, incase u assign external number range, the new avaialable number will be taken from the interval and will be provided to the newly created document (E.g., MAterial, PO, RFQ , etc..)
    I hope i am clear.
    Please provide atmost points.
    thanks
    rams

  • Number range object   :    J_1IINTPR2 and  J_1IEXCLOC

    Hi ,
      I want to know in which step of SD process the no. from the number range of Object
               J_1IINTPR2   :  Dispatch serial number
                J_1IEXCLOC : Local excise invoice number range,   is assign 
    means  as when we create  the SO the no. is  assign from the SO no. range  so similarly when at which steps the no. is assign from the above two objects.
       regards,
        zafar

    If the process involves local despatch from a manufacturing plant, then you need to maintain number range in TCode SNUM for the above two objects.  Of course, you need to have Excise Group and Series Group to generate an excise invoice.
    thanks
    G. Lakshmipathi

  • Cash Journal - Number Range

    Hi Team ,
    Has anyone managed to reset the last number of the CJ number range in Tcode FBCJC1 ?
    Thanks
    Kartik

    Hi Guys ,
    I know we can change the number range thru that Tcode, however the question is after the last number is changed to Zero....when we try to execute a transaction in FBCJ , the posting doesnt happen. When we try a few times , it still doesnt post but the numbers are taken up.
    Now ever after no transaction is posted,,,,depending on the number of times you have tried to post.....the last number would have changed.
    Has anybody experienced such behaviour ?
    Or is it that we shouldnt be resetting the number range at all ?
    Thanks
    Kartik

  • How to find next number range for project definition in tcode CJ20N

    Hai Experts,
          Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
    Note: I searched in forum before posting, but couldn't find the solution.
    Thanks
    Regards,
    Prabu S.

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • Tcode MD02 - PurchReq number range

    Dear Experts,
    I try to make sure whether it is eventually isn't possible to create a purchase requisition using Tcode MD02 (MRP run) using a defined number range (Tcode OMH7).
    As known a reservation exists and afterawards during the MRP run a purchase requisition is created.
    Using the enhancement MEREQ001(EXIT_SAPLMEREQ_009), M06B0003 (EXIT_SAPMM06B_001) and M06B0004 (EXIT_SAPLEBNE_001) I can only manage the number range for several Tcodes like ME51, ME51N, etc. ...
    Does anybody know whether it's possible to hang on my logic for the Tcode MD02 eventually MD51.
    Please advice
    Thanks
    PS: Please don't concern the Tcode OPTT which is only preordained for networks at all.

    Hi,
    Hmm ... the exit seems to be designated only for purchase orders as I see. There is no feature to link it to purchase requisition number range ... OR?
    Thanks

  • Me_process_po_cust badi for generating internal number range in me21n tcode

    Hi all,
    I have requirement while creating purchase order my client want to generate internal number range based on company code,document type and plant.here, we are making one custom table to hold compny code,plant,doc.type and Number range number.I am using me_process_po_cust badi for the same.I got the po header and item data from this badi.my problem is how i can pass this number range number in me21n to respective fields.
    Regards,
    Sleela Patil

    Hi,
    Thank u both of you..I tried that exit.following is the code I have written for that exit.
    TABLES: T001K,NRIV,EKKO,ZVS_MM_RANGE.
    DATA: WA_TAB TYPE ZVS_MM_RANGE,
          WERKS LIKE T001W-WERKS.
    GET PARAMETER ID 'WRK' FIELD WERKS.
    SELECT SINGLE * FROM T001K
                    WHERE BUKRS EQ NEKKO-BUKRS.
    IF SY-SUBRC EQ 0.
      SELECT SINGLE * FROM ZVS_MM_RANGE
                      INTO WA_TAB
                      WHERE BUKRS EQ NEKKO-BUKRS
                      AND WERKS EQ WERKS    "T001K-BWKEY
                      AND BSART EQ NEKKO-BSART.
      IF SY-SUBRC EQ 0.
        MOVE: NEKKO-EBELN TO NUMBER,
              WA_TAB-NRRANGENR TO RANGE.
      ELSE.
        MESSAGE 'Please maintain Number range in table zvs_mm_range' TYPE 'E'.
      ENDIF.
    ENDIF.
    Here, I am getting data as I needed but problem is client having multiple plant for single company code.I am not able to capture plant in this exit.as, it is in item level.so,later on tried to do it using me_process_po_cust badi.
    Now my problem is that how to pass this number range number in me23n tansaction.
    Regards,
    Sheela Patil

  • Number ranges for material document (migo) and inventory  documents

    Hi Gurus,
    We need a different number ranges for goods receipt documents  and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
    If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it  is the single transaction code used by different companies and how to give different number ranges.
    Regards,
    Sri........

    Hi,
    I think number ranges of inventory documents are on client level not on company code wise . because even though  your creating new document and assigned different number ranges for the documents but  these while assigning  ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level  not at company code level.

Maybe you are looking for