Number range interval for characteristic 0CSTELMNTYP is missing

All,
   I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP.  The transport moved fine to my Q environment, but not to prod,  The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
Dave

Hi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar

Similar Messages

  • Re : Maintain number range interval "" for quants

    Hi
        While doing the transfer order i am getting the following error.
    " Maintain number range interval "" for quants "
    How to solve this.
    Thanks
    Anto

    dear sir
    go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
    Regards
    jrp

  • Getting number range interval for document type

    Hi All,
    My requirement is to display number range interval for any docnument type in SD.
    I will elaborate my req. clearly.
    We can see document type of SD in TVAK table. If we give document type for ex. ZOR the we will see number range internal assignment (NUMKI). The complete number range we can search through transaction VN01 through NUMKI value. But I didnt get any table to relate NUMKI or Sales document type and internal number range.
    Please help me in searching database table to relate Document type or NUMKI and internal number range.
    Regards,
    Suresh.

    Relation is as below:
    TVAK --> AUART = "Sales Document Type"
    NRIV --> OBJECT = "RV_BELEG" and
             NRRANGENR = TVAK-NUMKI
    Alternatively you can use FM: NUMBER_GET_INFO with the Number Range Number and Object to extract Intervals.
    Regards
    Eswar

  • Maintain number range interval "" for inventory document --help!

    Dear all,
       I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code  LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

    1.Did u go into Number ranges for WM?
    Yes
    2.Did u click on assignment & number ranges not on Number range intervals
    Yes
    3.Di du cahnge it to 02 for all?.
    Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
    4.Did u select NR intervals? and give the number range?
    Yes
    5.Did u transport the intervals?
    No, as I am working on DEV practice client. Dont need to transport.
    6.Did assign the number rabges to ur Warehouse?
    I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
    I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

  • Maintain number range interval for master data upload for existing employee

    Hi  Experts,
    1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
    2) I have the senario where i have to upload master data for new employees.
    Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
    << Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
    Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

    >
    s c patil wrote:
    > 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an  Internal number range. & then default that Internal number range.
    >
    > Pls reply ASAP
    Yes Mr. Patil...
    For existing employees
    you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
    For new employees
    While configuration you can create another number range as internal  for new hiring. and use NUMKR feature as well.
    Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
    Best Regards,
    Anand Singh

  • ODS Activation Failure due to Number range object for characteristic ZTXLEV

    Hi
    I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
    can anyone help me
    thanks
    KINDLY SEND MAIL TO [email protected]
    srinivas

    HI,
    check this
    Error calling number range object 0MATERIAL for dimension D4 ( )

  • Transport Error like Number Range Inteval  for 0PRODID is missing

    Hello
    Iam transporting an infoobject  to Quality and got an error like Number range interval for 0PRODID is missing.
    But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
    can you pls let me know what to do.

    Hello prasanna
    Check with your Infoobject 0PRODID in Quality has got the Number range available.
    If not first generate the Number range or go with the RSRV run the test with Master and do the transport

  • Error-For object GL_LOCAL GBU1, number range interval  does not exist

    Hello experts
    I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015.  I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
    Please see the attached screenshots.
    Thank you.

    Hi Rahul
    Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed.  So, I just executed tcode GB02 and went straight to Interval --> transport.
    Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

  • Table for document type Number Range interval

    Hi,
    I want to know the number range interval for document type in the production system but I do not have authorisation for SPRO in the prd system.
    Kindly let me know the table name to check this number range interval for the document type.
    Table T003 stores only the number range and not the interval.
    Thanks
    Suresh

    Hi,
    The table which has document types is T003 but the number ranges are stored in a Structure IRDP. The number ranges are maintained directly in the production system.
    regards,
    radhika
    Edited by: kolipara radhika on Aug 25, 2008 6:01 AM

  • Subject: Number Range interval deleted automatically

    Hi
    At the time of Accounting Document Posting system is giving error message for maintaining number ranges interval for the corresponding Number Ranges (For example: 50, 51, 49, 19) for the fiscal year 2010. But Number range interval has already been maintained in the Tcode FBN1 for the fiscal year 2010.
    After maintaining Number range interval again for the corresponding number range in Tcode FBN1, when we are trying to post accounting document system is again giving one error message that document number (5000000000) is already been used. When we are looking into Tcode FBN1 the current number status is 0.
    So to resolve this problem  we have to provide the Number range status into FBN1 manually (suppose if 10 doc are already existing in the system for number range 50 then we have enter the number range 5000000010 manually in FBN1).
    After Number range status setting in FBN1 System is allowing to post the Accounting Document.
    Along with this one more issue is appearing related to MM posting period. 
    The current posting period in the system is 08/2010 and the initial period in the system is 08/2007. System is automatically going back to the initial posting period 08/2007. After opening the Posting Period with Tcode MMPV we can post the document only.
    Both Issues are appearing repeatedly.
    Plese help
    Thanks..
    BRSR

    Dear If you have already maintained number range for particular period then again for same period and series system should not allow to maintain but as you said above it is allowed so i feel it was not done correctly first time and the given series number could have already been used so when changed the current number in status it's working fine.
    For  MM posting period issue please check transactions MMRV,OMSY,OMWD with your MM consultant
    Cheers
    KK
    Edited by: kiran kumar on Oct 19, 2010 8:32 PM

  • Change / Create number range interval

    Hi All,
    I have an issue with number ranges.
    I am working on a global roleout and and have an issue where in DEV client my PM orders are assigned to number range 5000000 - 5999999 but from QAS to PRD this number range has been used for something else. Infact all available number ranges are taken!!!!!! Poor management I know.
    How do I or can I create a new number range interval for example 20000000 - 29999999. If I can do this I can the reasigne the PM orders to this new range.
    Thanks in advance
    Stuart

    hi
    what you can do is either change the internal number range ,for example if the existing no range is from 500-1000 then you can change the ending number range say from 1000 to 9999 and assign to the particular order type
    or create an new number range for the order type and assign to the respective order
    regards
    thyagarajan

  • Item Number : Number Range Interval

    How can I configure Number Range Interval for Item Numbers with leading zeroes?
    Thanks.

    Hi Bhavesh
    Use the tcode OMSL and there u can check the check box  "Leading Zero"
    Hope it wud have answered ur question
    Reward if useful
    Aasif

  • Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

    Hi,
    When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
    +For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
        +Message no. NR751+
    +Diagnosis+
        +The database table NRIV has the delivery class 'C', i.e. the SAP default+
        +settings are only in client 000.+
    +Procedure+
        +Create the missing number range interval in customizing.+
        +Transaction code: FBN1+
    When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
    Sanjay

    Hi,
    You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
    Steps:
    Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
    Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
    Hopefully it works for You............
    Dipti

  • An error in cash jounal:For object CAJO_DOC2 AAA, number range interval 01

    hi
    whan i am doing an entry in cash journal(in cas receipts) and post when a massege coms here "For object CAJO_DOC2 AAA, number range interval 01 does not exist"
    can anybody help me and solve it.
    thanks

    HI,
    First Method
    Go to TCODE "SNRO"
    Give the Object as "CAJO_DOC2"
    Click on the "Number Ranges"
    Give the Company code
    Click on the Change Intervals.
    Mainatain number range 01 and save.
    Second method
    use path Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Define Number Range Intervals for Cash Journal Documents
    Or Tcode FBCJC1 to maintain number range intervals.
    An assumption to the above solution is that you have assigned the FI document type with which these documents should get posted with in the following path an dthe number range for that document type is alreday defined.
    Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Set Up Cash Journal
    With adopting one of the above solutions you will be able to post the transactions.
    Reward points.
    Sarma

  • Maintain number range interval 01 for posting change notices

    Hi,
    I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
    WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
    Thanks & Regards
    Atharva

    Maintain number range for posting change in tcode  OMLW

Maybe you are looking for