Number range interval not found for object ISH_NLEI in executing NP38

Dear ALL,
In executing Transaction NP38 when we save the surgical procedure codes the system
generates an error message "number range interval not found " . The object referred here
ISH_NLEI number range has already been defined in spro Define technical number range.
Please assist what should be done here to resolve the problem.
Regards
Ramit

Hi, check if it maintained in tcode snro for this object

Similar Messages

  • Funds mngt - Number range 01 not found for object BULI_DOCNR

    Hi all
    need some urgent help to crack an error am getting while creating a budget in funds management.
    the error am getting is
    "Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
    I have maintained the number range in
    Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
    But am still getting the error....
    will really appreciate some help on this
    thanks in advance

    The number range object refers to  "FM budgeting line item number "
    Are you using Former budgeting or BCS ?
    Try t-code- ok11 and ok91 under former budgeting.
    Thanks
    Siva

  • Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

    Hi Gurus,
    When I try to capture deemed export license from J1ILIC01 I get this error
    The number range is not maintained for Object/Year: J_1ILIC/
    I tried to maintain number ranges in SNRO & SNUM  there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

    Hi
    Just check if you have maintained number range for the correct year as shown in error.
    Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

  • The number range is not maintained for Object/Year: J_1ILIC/

    Hello,
    I am facing the problem as
    After Created the No range object j_1ilic for excise bond, for capturing the CT3 form in J1ILIC01 and maintain the required fields in J1ILIC01, following error is occuring
    "The number range is not maintained for Object/Year: J_1ILIC/"
    Kindly advice on the same
    Thanx in advance
    Shailesh

    Hi,
    You will have maintain the Number range for the Lisence for the object J_1ILIC through SNRO.
    Regards,
    Murali

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

    Hi All,
    My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
    Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
    Message NO k5011.
    As this is more ralaing to the costing sheet, this refers to controlling module.
    We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the  6.0 verion.
    Can anybody suggest the reason for the above error.
    Thanks & Regards
    Shankar

    HI,
    whats the message class, message number?
    BR Christian

  • Error in allocating Excise inv no Interval not found No object J_1IEXCLOC

    Hi, When I try to execute J1IV, I am getting the below error:
    Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
    Message no. 8I336
    All number ranges are maintained for the above object. Please let me know, whether anyone encountered the same situation and how to resolve the same.
    Regards
    Suresh

    Hi,
    Please check in SNRO as you allocated no range for J_1IEXCLOC  object for your series group & check for J_1IARE3 object also for same series group.
    regards

  • Some external number range are not valid for equipment creation

    Hi All,
    What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
    Waiting for your valuable inputs..
    Thanks
    Surya

    Hi
    As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
    Regards,
    Rakesh

  • For object RF_BELEG 2020, number range interval 50 does not exist FBN1

    Hi Guru's
    While posting GR i am getting this error
    For object RF_BELEG 2020, number range interval 50 does not exist FBN1
    kindly guide me to slove this error. Thanks in advance
    Regards
    Anandh

    Hi Piyush Mishra
      I have entered the number range intervals in FBN1. Still the error is existing.
      Number range interval 50 means ?? Any specific range of 50 we should give ???
    regards
    anandh

  • For object RF_BELEG LT, number range interval 50 does not exist FBN1

    dear all
    system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)

    Hey Manish,
    You can use these t-codes.It can be solved with all together number ranges.
    1- OBH2
    In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
    2- OBH1
    In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
    Wish you all the best.
    Onur

  • For object XABBELEGNR , number range interval  does not exist OMJ6

    Dear all
            I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval  does not exist OMJ6.
    Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
    regards
    M.Chandra mohan

    hi
    u just go to tcode omc1.
    activate gr/gi slip for plant
    then create number range group code and assign it to plant ,storage location and movenent type combination.
    Then u can create the intervals thru OMJ6.
    Hope it helps
    rewrad if useful
    Rohit

  • Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

    Hi,
    When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
    +For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
        +Message no. NR751+
    +Diagnosis+
        +The database table NRIV has the delivery class 'C', i.e. the SAP default+
        +settings are only in client 000.+
    +Procedure+
        +Create the missing number range interval in customizing.+
        +Transaction code: FBN1+
    When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
    Sanjay

    Hi,
    You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
    Steps:
    Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
    Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
    Hopefully it works for You............
    Dipti

  • Number range object HRTR_PDOC : Interval not found

    Hi,
    I am doing Travel Mgt testing i got two problems
    1. Travel Policy is not taking when entering the expences
    2. when posting the doc to FI the error "Number range object HRTR_PDOC : Interval not found" is coming
    Pls suggest
    thanks in advance
    chandu

    Hi,
    Check table NRIV
    Regards,
    Manoj.

  • For object RV_BELEG , number range interval  does not exit

    I am receiving this error when trying to generate billing document type L2 for a newly created company code.
    Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
    Any thouhgts ?
    -Mark

    Please check if the error is
    "For object RV_BELEG , number range interval does not exit"
    "For object RV_BELEG , number range interval <b>10</b> does not exit"
    10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
    Also Check
    If you are using
    Include program : RV60AFZZ
    Routine: USEREXIT_NUMBER_RANGE
    If so then for each plant you have assign a number range for each billing type (L2- here).
    Thanks,
    Ashish

  • For object RF_BELEG OK03, number range interval 33 does not exist

    Hi. After new year I opened financial and material periods (01/2008). When I want to make some movement in MB1B - the communicate occurs:
    For object RF_BELEG OK03, number range interval 33 does not exist
    Could You give me some tip what should I do now?

    go to j1i9  or  snro
    enter uour object name
    assign here
    no range 33

Maybe you are looking for

  • Forbid partial delivery of item, but allow partial delivery of sales order

    HI, have someone faced situation when it is required to allow partial delivery for sales order with restriction that item in sales order should be delivered fully. For example: SO has following items: Item1     MAT1     10 un Item2     MAT2     10 un

  • Function for PM Order Creation on 4.6C

    I would like to create a PM Order through BAPI or another standard function. But I couldn't find any in our R/3 version (4.6c). Anybody can help me? Thanks in advance.

  • Using the Host command

    Hi, I'm running windows 2000 O/S on my desktop to connect to an IBM AIX server to run Forms6. If you call the host command from within forms, does it go to the my desktop (client) or to AIX (server). Also, if I need a username and password to log ont

  • Alerts, Notify and e-mail using UWL from BPM tasks

    Hello experts, Can we activate UWL alerts and notifications for bpm human tasks ? For example, when a task needs to be completed and the user doesn't not make any thing, can we send an UWL Alert or message that appears to a supervisor role? Regards!

  • Deleted iphoto

    OK so here's how this went my wife happened to see two iphoto icons and put one in the trash I emptyed the trash and all her photograpghy event's and pics are gone. I called Apple they recomended Datarescue 3 and getting an external hard drive so i d