Number range intervel 50 does not exit fbn1

Hi,
I am getting these Error while using MIGO Transaction in Quality server.plz tell me how can i Solve these problem.
for object rf_beleg gvk,number range intervel 50 does not exit fbn1

Dear
Maintain the number range for invoice documents in FBn1 t.code for 50 for the fiscal year 2009
prodecure add in new intervels,
Ex:
No year   from number             to number
50  2009  1000001                   1999999
Regards
venu gopal

Similar Messages

  • For object RV_BELEG , number range interval  does not exit

    I am receiving this error when trying to generate billing document type L2 for a newly created company code.
    Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
    Any thouhgts ?
    -Mark

    Please check if the error is
    "For object RV_BELEG , number range interval does not exit"
    "For object RV_BELEG , number range interval <b>10</b> does not exit"
    10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
    Also Check
    If you are using
    Include program : RV60AFZZ
    Routine: USEREXIT_NUMBER_RANGE
    If so then for each plant you have assign a number range for each billing type (L2- here).
    Thanks,
    Ashish

  • For object XABBELEGNR , number range interval  does not exist OMJ6

    Dear all
            I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval  does not exist OMJ6.
    Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
    regards
    M.Chandra mohan

    hi
    u just go to tcode omc1.
    activate gr/gi slip for plant
    then create number range group code and assign it to plant ,storage location and movenent type combination.
    Then u can create the intervals thru OMJ6.
    Hope it helps
    rewrad if useful
    Rohit

  • Object ROUTING_N number range 01 does not exist

    My students all have this error, "Object ROUTING_N number range 01 does not exist", when they create and save routings. I tried to configure it using transaction code OP8B and OP62 as someone else suggested here. However, it still doesn't work. Anyone can help? Thanks a lot!

    It didn't work, either.

  • For Object RV_BELEG, number range SD does not exist

    Dear Gurus,
    I have created a sales order VA01 with 1 material, and when I try to print the invoice, I have the following message of error:
    'For Object RV_BELEG, number range SD does not exist'
    I have checked my output types, they have been rightly assigned to the invoice forms.
    OK, so If I have to assign number ranges to sales documents, how can I do that? Do I have to talk to FI guys to?
    Please help.
    Regards
    Christian

    Thats SD numbeer range that is missing. Each invoice has two numbers one in SD and one in FI.
    Just go to SNRO type RV_BELEG and maintain it (the name of the number range you have in your billing document type setup in spro)
    Piotr.

  • NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

    Hi ,
    I am getting a message at production order release i.e.' NUMBER RANGE OBJECT DOES NOT EXIST' in CO01 for one order type whereas i am not getting for other.
    I maintained the order type in SNRO so order is getting created.

    Hi
    Maintain the N Range  in T code SNRO  for No Range Object AUFTRAG and also in t code CO82 assign the no range maintained in SNRO to the corresponding Order type by maintaining in GROUP in CO82
    Plz check and revert
    Regards
    Anupam Sharma

  • Number range 01 does not exist

    Hi Gurus;
    I am trying to create a Interest rate instrument with Product type 55G and Transaction type 200. Though the number range is defined in : SPRO  CFM  Basic Functions  SAP Business Partner for Financial Services  General Settings  Business Partner  Basic Settings  Number range and grouping  Define Number Ranges has No. Range as 01 but whenever I am trying to create this instrument for a particular co. code it is throwing an error as "Number range 01 does not exist". Has anybody got any idea for what to do?
    Regards;
    Sumanta

    Your error message is related to treasury transaction number and not about business partner number range.  Please check the following path and maintain number range:
    FSCM-TRM-Transaction manager-Money Market-Transaction Management-Transaction types-Define number ranges
    Transaction Code : TAC1.
    If this will not solve your error please try to have a look at the detailed error message and get back to the forum.
    thanks,
    Kumar

  • Number range "PO" does not exists *****Classic

    Hi Friends,
    We are in SRM 5.5 and classic mode is on and we require backend PO to be created. We have replicated all data from backend and trying to create a PO (ECDP Direct Material) and when we click the create button in 'Process Pur Order' it does not allow to create a PO and gives error "No range PO does not exist". The same error is thrown while we convert an accepted Bid into a PO from Bidding engine. We have made the following settings.
    Classic mode is on.
    internal No Range "PO" created in SRM under shopping cart and follow on document.
    Defined trnsc type ECDP and assigned this no range PO to it. It is Active.
    Defined External no range "PO" in ECC B/E client with matching range. (Marked external)
    Defined Doc Type ECDP in ECC and assigned this no range to it.
    In SRM under "Define Number Ranges per Backend System for Follow-on Documents" Maintained Log Sys as ECC Backend client and "PO" in PO number range.
    Also all relavent attributes are maintained including BSA.
    Is there any sttings which are missing how can we locate the problem. Any help in this would be highly appreciated.
    Also post this are there any special tips for PO Creation and transfer from Bidding Engine in Classic Mode? where can I find the links?
    Answers will be surely rewarded. Thanks
    Hussain

    Hi Guys,
    appologies to reply late. Actually the resolution is taken from the SDN itself with little changes.
    What we resolved is to fool the system by passing an ACC with a dummy cost centre.
    use ECC BADI u2018BBP_BADI_EXTREQ_OUTu2019 to assign a standard ACC but with a dummy cost centre.
    the SRM process for direct material is hardcoded hence this converts the direct procurement into indirect. The SRM SHC will contain the cost assignment tab.
    Now when you process this document and generate a PO the document type should be ECPO and then it will pick up the number range defined under "Shopping Cart and follow-on documents".
    **For a Direct Material system is hardcoded to look for a local number range irrespective of your scenario.
    Now while creating a PO from SRM use BADI BBP_CREATE_BE_PO_NEW  to check if the dummy cost centre exists then remove the CC and the ACC before creating the backend PO. The ECC PO will be that of direct material type.
    Thanks
    Hussain

  • 0FISCPER : number range object does not exist

    Hi,
        We have got this error while trying to repair the infoobject :0FISCPER in RSD1.I have tried doing the repair but it did not work.I tried to create a new no range by snro but i was not able to do that.
         Can some pl help

    Hi
    Use RSRV  for this purpose
    There is a tab of master data in that u find lot many test even u can pull all elementary tests tab to the right side and perform all the tests or even u can pull one among the all tests ie number range interval to the right side enter your infooobject name and execute it and then press correct errors
    thanks
    puneet

  • Error-For object GL_LOCAL GBU1, number range interval  does not exist

    Hello experts
    I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015.  I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
    Please see the attached screenshots.
    Thank you.

    Hi Rahul
    Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed.  So, I just executed tcode GB02 and went straight to Interval --> transport.
    Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

  • Delete number range which is not initial

    Dear All,
    Request to kindly do let us know how can we delete a number range which does not have status initial.
    regards,
    mahesh.

    Hi,
    When you go to No Range screen for e.g. MMNR,
    here click on Change Status button and make current number as zero and then save
    Then come back and click Change Interval and delete

  • RF_BELEG GMR, number range interval 51 does not exist FBN1 Message no. NR75

    HI ALL
    IAM GETTING  THIS MESSAGE WHILE POSTING MIGO
    For object RF_BELEG GMR, number range interval 51 does not exist FBN1
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code: FBN1
    Regards,
    parameshwar

    Hi,
    check following link
    [problems in goods receive t.code MIGO;
    Regards
    Kailas Ugale

  • For object RF_BELEG 2020, number range interval 50 does not exist FBN1

    Hi Guru's
    While posting GR i am getting this error
    For object RF_BELEG 2020, number range interval 50 does not exist FBN1
    kindly guide me to slove this error. Thanks in advance
    Regards
    Anandh

    Hi Piyush Mishra
      I have entered the number range intervals in FBN1. Still the error is existing.
      Number range interval 50 means ?? Any specific range of 50 we should give ???
    regards
    anandh

  • For object RF_BELEG LT, number range interval 50 does not exist FBN1

    dear all
    system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)

    Hey Manish,
    You can use these t-codes.It can be solved with all together number ranges.
    1- OBH2
    In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
    2- OBH1
    In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
    Wish you all the best.
    Onur

  • For object rf_beleg 3000 number range inerval 50 does not exist FBN1

    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    in ob52 i see the following for my cc 3000
            from period1   year    to period   year     from period 2   year  to period year
    3000+        1         2003       12        2007         13                2007   16  2007
    3000A        1        2003        12       2007
    3000D        1        2003         12      2007
    3000K        1        2003         12      2007
    3000S         1       2003         12      2007
    when i try to post a goods movement for a po i get the following error
    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    is something wrong in this table???????
    any help would be great
    thank you in advance

    Hi
    This is not connected with Posting periods but with  document number ranges.
    Create document Number range interval 50 for year 2007 using T.code FBN1.
    This should solve ur problem
    Regards
    Aravind
    Assign points if useful

Maybe you are looking for