Number range is not enabling save icon

HI all,
vn01 tcode, my functional team is changing the intervals and once it completed if they click on back button then
it is not asking us to save but the changes has been updated without saving and if we delete intervals and tries
to click back button then it is asking to save.
Any note needs to apply then let me know.
BR,
Kutty

Hi,
Make sure you have sufficient authorization to have the Save Icon enabled.
Else, you may try changing the number range from SNRO by selecting the required object.
Also check the followiing, if it helps.
http://help.sap.com/saphelp_nw04/helpdata/en/1f/8311204bc511d189750000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/aa/dbc9b4b56143bb8f2ae909d7d040fa/content.htm
http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
Regards,
Varun

Similar Messages

  • Number range interval not found for object ISH_NLEI in executing NP38

    Dear ALL,
    In executing Transaction NP38 when we save the surgical procedure codes the system
    generates an error message "number range interval not found " . The object referred here
    ISH_NLEI number range has already been defined in spro Define technical number range.
    Please assist what should be done here to resolve the problem.
    Regards
    Ramit

    Hi, check if it maintained in tcode snro for this object

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • Funds mngt - Number range 01 not found for object BULI_DOCNR

    Hi all
    need some urgent help to crack an error am getting while creating a budget in funds management.
    the error am getting is
    "Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
    I have maintained the number range in
    Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
    But am still getting the error....
    will really appreciate some help on this
    thanks in advance

    The number range object refers to  "FM budgeting line item number "
    Are you using Former budgeting or BCS ?
    Try t-code- ok11 and ok91 under former budgeting.
    Thanks
    Siva

  • For object RF_BELEG number range does not exist

    Hi,
    while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
    " Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
    what could be the reason for this error? can anyone help me to fix this error.
    i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
    can anyone help me out

    Try Extending the same in VN01 , and assigning it to your relevant document
    Cheers

  • SAP CRM Error: A number range is not assigned to account group

    Hi Experts,
    We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
    We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
    Request you quick response.
    Thanks,
    Chaudh.

    HI Chaudh,
    I am facing similiar issue. When i am creating BP in CRM WebUI, I am getting an error message: "Error in Transporting Number Range".
    Could you please share your findings, how you solved your issue?
    Dave

  • BDOC Error: A number range is not assigned to account group Sold-to party

    Hi Experts,
    We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
    We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
    Request you quick response.
    Thanks,
    Chaudh.

    Hi Chaudh,
    Please find the exact solution here.
    http://wiki.sdn.sap.com/wiki/display/CRM/IssuesduringBusinessPartnerreplicationbetweenCRMandERP
    Cheers,
    Josh

  • Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

    Hi Gurus,
    When I try to capture deemed export license from J1ILIC01 I get this error
    The number range is not maintained for Object/Year: J_1ILIC/
    I tried to maintain number ranges in SNRO & SNUM  there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

    Hi
    Just check if you have maintained number range for the correct year as shown in error.
    Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

  • The number range is not maintained for Object/Year: J_1ILIC/

    Hello,
    I am facing the problem as
    After Created the No range object j_1ilic for excise bond, for capturing the CT3 form in J1ILIC01 and maintain the required fields in J1ILIC01, following error is occuring
    "The number range is not maintained for Object/Year: J_1ILIC/"
    Kindly advice on the same
    Thanx in advance
    Shailesh

    Hi,
    You will have maintain the Number range for the Lisence for the object J_1ILIC through SNRO.
    Regards,
    Murali

  • Number range does not exist error message while releasing billing document

    Hi,
    We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval  does not exist FBN1".  Note : System does not specify which number range is missing...
    There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
    Regards,
    Sakthy

    Hi,
    I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
    I hope this will make sense.
    Panneer

  • Status of number range has not updated

    HI GURUS!
    I read a lot of similar questions as mine. But I didn't find the correct answer for my problem.
    The issue is: after I uploaded the Vendor master with LSMW, the status of the number range is still 0!
    So I have to change it manually. What should be the problem? Is it possible that problem is in the NUMBER_GET_NEXT fm?
    Thanks in advance,
    Gábor

    Hi!
    The number range for vendors is internal! If I change the status after migration, in the XK01 transaction the system gives the correct next number. But how can it possible that the status has not updated after uploading?
    Best regards,
    Gábor

  • Number range does not exist error while creating shopping cart

    Hi,
    I am working in SRM 5.0 classic scenario..while creating a shopping cart it gives error as number range 01 does not exist.(while clicking shop button).
    Thanks&Regards,
    Aravind.

    Hi,
    Please maintain SC number range and transaction type assignment in SRM SPRO.
    --> cross application -> number range
    Kind regards,
    Yann

  • PR number range Exit not working

    Hi all ,
    We are using Exit for assigning the number range to the PRs   using  M06B0004  and  M06B0003  but its not picking the exit .
    We are using the same  exits for getting the number range for other roll outs (Plant numbers )and its working fine .
    I cant debug it as it doesn't stop there even if I put a hard break-point  .
    Thanks in advance,

    Hi Naval,
    Please try user exit MEREQ001 with function module EXIT_SAPLMEREQ_009.
    Hope it works for you...
    Best regrads,
    Heydarul

  • Some external number range are not valid for equipment creation

    Hi All,
    What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
    Waiting for your valuable inputs..
    Thanks
    Surya

    Hi
    As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
    Regards,
    Rakesh

  • Number range objects not maintained properly...??

    Am doing a Purchase Requisition for asset material. While saving the PR document am getting error like
    I have went to SNRO and checked asset number range object ANLAGENNR , there intervals are maintained. i couldn't go further with the issue, Can anyone help me with the solution please?
    Regards,
    Naveen

    Hi,
    Please
    1. Go to transaction code J1I9
    2. Give object name as BANF.
    3. Click on Number Ranges.
    4. Click on Intervals
    5. Maintain Intervals
    6. Save
    Hope, your problem has been resolved else revert.
    Regards,
    Tejas

Maybe you are looking for

  • How to find out the name of a table?

    Hi How can I find out the name of a table which doesn't have a record history? Regards Rahman

  • How do i get the audio mixer window back

    I have reinstalled the program 3 times and I still can't get the audio window back, I moved it over out of the way while making a video and it won't come bak into the frame. Pretty poor program design in my opinion, the volume controls should stay in

  • Sparse VS Dense and neglecting Period Dimension

    Hi All, I am working on a classic planning application, in which i have 3 custom dimensions apart from six standard dimension. As the application grows and we start developing business rule we feel the need for optimization of our application hence a

  • Premiere sends EDL with 'invalid timecode format string'

    Following the suggestions in this thread, I am attempting to send an EDL of a Premiere sequence to Speedgrade. When I attempt to import the EDL into Speedgrade I get this error message: ERROR In point timecode is invalid. Invalid timecode format stri

  • Static in tracks from a new artist

    artist: Margot & The Nuclear So and So's album: The Dust of Retreat A number of tracks from this album have static in them -- like they were encoded poorly. I have tried them on: - my ibook - through my airport - on my ipod - burned to an audio cd it