Number Range Maintain Problem

Hi to ALL PP Gurus
I am new to this site
My issue is inFBN1 i was try to matin nuber range for goods recipt i.e. for 50 siries
like from 5000000000 to 5099999999 but system show "define number range without overlap"
how to main tain numbers
and how to reward point for reply, how to close Thread
Regards
DEV

Dev
1)The OVER LAP Means some of the numbers between your Number Ranges Specified was already declared in that FBN1, so you have to start and end with Numbers not assigned in the Number Range
For Eg if you are in Ides means that Number ranges has already available for the year 9999 in FBN1 Transaction , that's why it is througing error.
2) Rewarding Point
You can see in the left side of the reply of thread points like 6 , 4 and 2 with respect to completely solved the problem, ...etc, you have to just click that Bullet is enough for rewarding
3) Closing of thread
In the top area of your thread you can find ANSWERD , if you click, that thread will closed

Similar Messages

MIRO document Number range buffering problem

Dear all,
My MIRO document number is not following the sequence. if my first 5 numbers come in a sequence, then the next 5 numbers are not coming in between. Instead, the next 5 numbers are coming. It might be due to number range buffering problem. How to find the number range object for MIRO document number range?
How to solve this?
Please suggest.
I will award full points.
Thanks & Regards,
AR

Hii,
You can search the Number Range object in T-Code: SNRO
The Number Range object for Invoice document is RE_BELEG
Go the Change Mode of the Number Range Object in SNRO, remove the No of Numbers of Buffers (by default it will be 10).
This will resolve your issue.
Regards,
Kumar

Number range maintaining..

Hi all,
i am facing a problem in my sap while doing the IW 25, IW55 codes. while executing the code itself the error message coming like" Number range not maintained for the notification type m3. kindly help me to correct this issue....
Regs,
Siva-V

Hi Sivakumar,
Maintain the number ranges for "M3" notification type in the "IW20" Tcode as shown below
Click on groups
Select the PM notifications and click on "Maintain" as shown below
Click save
Then run the T code "IW55" to create notification
As above shown we can create the notification without number range error
Thanks,
Anil.G

SNRO - Creation of Number range object problem

Hi Experts,
i wanted to create a number range object thru SNRO.
The creation was successful in DEV system.
when i tried to create the same number range object in QA server, i am getting the following error
"Changes to Repository or cross-client Customizing are not permitted - Choose 'Display object' or 'Cancel'."
this is a Znumber range used to generate sequential numbers using FM NUMBER_GET_NEXT
What could be the problem. how to over come this?
Is it the missing authorizations? if so what could be the authorization object (SU53 shows nothing)
Appreciate any help in this regard.
Thanks
Simha

Hi All,
I am confused with the conflicting answers for my problem. But anyways i could transport the number range object and could create a number range interval in QAS.
Thanks a lot for all your valuable inputs.
But i am still not out of this so called misconception - Are number range objects to be transported to QA or to be created afresh in QA/PRD?
Earlier some one told to be created but now i see they can be transported.
I was not ready to edit the options in SCC4 for the client to enable object creation.
Thanks again,
Simha

Number range transport problem in Internal orders

Hi,
I created new internal order type in KOT2_OPA t. code and at the time of saving it is asking number range. so i assigned one number range interval to the order type and saved the application in development server and noted down the request number. i released the request to the Testing and Quality server. in that it is not showing the number range in quality server. What i have to do. Does i have to do any configuration for the moving of number ranges to testing from development. please guide me deeply it is very urgent for me.

Hi,
Number range objects can be saved in workbench requests & transported manually.
Thanks
Kishore

Reg. Number range table problem

Dear Friends
During request move from development to Production unfortunately Tabel NRIV is moved and all the number ranges is collapsed but data is exist, I want to restore the same as old. Please help me. And is there any tcode to see all the last document number for the year 2011.
Please help me
Thanks
Rajakumar.K

You can find last number from report(for example purchase order - ME2N) which will be current number,
Go to SNRO,for example purchase order, enter object - 'EINKBELEG',Click status(pencil icon),
enter last number which is current number for internal number range(Also refer internal number range assigned to document types).
Repeat above step for objects carefully one by one.

GR number range maintain

Dear All,
I have 2 company code and I want to create 2 number range interval
for 1st 5000000000 to 5999999999
and 2nd 600000000 to 6999999999
Shall I have two create two GR doct type like we1, we2...........or
How can I do it?
Thanks in advance
Shuvankar

hi,
If you want GR material document number range then its dependent on the Transaction type or being more precise Transaction event key...and Year....
Now these keys are internally defined....
So which ever number range you wanna assign can be done via above two parameters...but at a time you can have one only for the given transaction and year....
If you want accounting doc number range, then it depends on the document type, co,.code and fiscal year....and for this you can have two different number ranges...
Hope it solves your query....
Regards
Priyanka.P

Number range skip problem during material creation

Hi MM expert,
When we are creating material, its number is skipping by interval of 10.
kindly tell the solution.
Regards,
Santosh

Hi,
Please check which number range assigned to the Materiial type you are creating at sprologistics generalmaterial masterbasic settings-material type .and for the number range at the transaction code MMNR .
Regards,

Number Range Related Problem

Hi,
The user is trying to insert an interval through SNRO, object is Equip_nr.
But the' Insert Interval ' option is disabled.
This user has S_num with * for both the fields. Even I am getting nothing in trace.
So can someone please tell me, what else I have to check?
I'm not sure, whether Personalization( SU01 ) will make any difference, or not. If yes, then can you please tell me that particular setting?
Thanks a lot.
Regards,
Sachhidanand Rankhambe

Hi,
your problem is not related to authorizations. Actually, it's not a problem at all. Every object can either have one or two intervals. In case of EQUIP_NR there are already two intervals - internal and external. So you can not add any additional interval to this object.
Cheers

Organizational Management- Maintain Number Ranges

Hi All
In menu path :
Personnel Management -> Organizational Management -> Basic Settings -> Maintain Number Ranges -> Maintain Number Ranges
I have maintained the number ranges as mentioned below
Job(C) 10000 to 20000,
Position (S) 20001 to 30000,
Org Unit (O) 30001 to 40000 .
After maintaining i have saved in a Transport Request .
Now am importing it in to the Quality . In Quality i am getting only the Objects Job , Position , Org Unit but the number ranges
maintained above is not imported .
Kindly let me know what is the problem .
Pls send me the solution how to transport the number Ranges .
I would appreciate for an earliest response .
Thanks in Advance

Hi,
Please check below SAP wiki link which will guide you and show different settings that may be required to accomplish along with issues you may face.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
Thanks,
Ameet

Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

2 external number range for vendor

Hello,
I am facing a problem when I try to replicate vendor from R/3.
I have 2 external vendor number ranges maintained in SRM, But only the last created external number range is taken into account when i replicate vendors from R/3.
Please could you tell me how can I maintain 2 external number ranges in SRM?
This is very urgent, I need to replicate vendors from R/3.
SRM 4.0 Extended Classic scenario.
Regards,
Shaiek

Hi Lina
You will have to combine all number ranges in R/3 and create one number range in SRM, if you want to retain the R/3 numbers.
e.g. If your R/3 number ranges are
100000 - 200000
600000 - 699999
In SRM, you need 100000-699999 as the external number range.
At any point of time, you can make only one no. range as default in SRM.
Best regards
Ramki

Wrong Depot Excise Invoice Number Ranges

Hi,
We have created the new number ranges for the year 2010 for Object - J_1IDEPINV(series group S11)
But when the Depot excise invoice is created by using J1IJ with reference to delivery, the number ranges are picked from old series of 2009.
The Delivery is dated 29 March 2010, the excise invoice is created on 2nd April 2010.
The number ranges are maintained on 1st April 2010.
Regards,
Jagadish

Please check Object - J_1IDEPINV in SNUM ,J1I9,SNRO
whether To-year flag is set or not , check must be. and number range interval no is 01
For your info- even in the compnay code setting in LG-- Tax ongoods movment-
here First Month :4April----if these setting are there surelly you will get new number range maintain in 2010
likes points please

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Clear Vendor Down Payment F-54, Number range

Hi Experts
I tried to clear the vendor down payment using the T-Code; F-54, It is displaying a error message as "Number Range 17 is Missing for the year 2010"
Message no. F5150
Diagnosis
The document type you specified has been allocated to a number range in fiscal year "2010" that has not been created.
- Should we need to create a New Number range for this document type.
- Is this a New requirement in ECC 6.0?
- Is this linked to the New GL feature?
Please share your views.
With Regards
Siva

Hi,
The document type you are using is referring to number range maintained with the id 17. You need to go to FBN1 transaction code and maintain a number range for id 17 for the year 2010.
Normally the accounting document number ranges are maintained year specific so that every new fiscal year will restart at 1 and not continue from last year.
As corrected by Ramnuja, you need to maintain number ranges for entry view and general ledger view (new GL feature).
For you the number range 17 has not been maintianed for 2010 and you need to maintain it.
hope this helps.
thanks and regards,
anit
Edited by: Anit Mangat on Nov 23, 2010 4:56 PM

Number Range Maintain Problem

Similar Messages

Maybe you are looking for