Number range missing during f-32

hii
while i m doing f-32 for customer clearing then system showing error msg...
"In company code 1000, the number range 80 is missing for the year 2009"
how we will set number range?
Thanks & Regards
Rekha shrama

hi
Go to T.Code FBN1 enter C.Code 1000 and select chagne option. add number ranges for 80 with applicable range.
reg
S. Habib Pasha

Similar Messages

Number Range Missing

Strange behavior is there in the system concerning the Number range as some Invoice Numbers are missing from the system for example after 111121..it is 111122..and then 111123, 24, 25 is missing then 26 is there and then 27 is missing and then 112228 is there, Buffer Management is not maintained for the SD Object RV_BELEG and no archiving also
Any Suggestions where to look into for this.
Regards,
N

Hi
Goto VOFA for your billing document type and fetch number range assigned to that.
Goto SE11>Table TVFK>pass your number range fetched in above step as NUMKI and see which else document has assigned to it.
Pass same number to table TVAK to check whether sales order document has assigned to this number range.

Number range missing in Miro

While performing incoming invoice manually, I am getting an error "In Company code ___, the number 51 is missing for the year 2008". I have tried to assign number through FBN1 but to no help.
Any suggestion??

Hi
goto FBN1 and enter the company code and press the intervals icon with pencil.
in the "maintain number range intervals:"
enter the 51 as no and year as 2008 and from as 510000000 and to as 51999999999 just check the no ranges for the prevoious the range assigned to 51
u can assign the same no range to 51.
hope u r in IDES
regards

Number range missing for characteristic 0AF_SEAN after importing request

Hii friends,
I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
Then error which i m getting is ,
Number range interval for characteristic 0AF_SEAN is missing
Error when activating InfoObject 0MATERIAL
Characteristic 0MATERIAL: Error when generating master data routines
Error when resetting InfoObject 0MATERIAL to the active version
I am waiting for ur positive reply.
Thanks & Regds,
Kavan Shah

hi Kavan,
try
transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
Error calling number range object 0MATERIAL for dimension D4 ( )
or check oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Transporting DataSources
hope this helps.

Reg: Billing Document Number Range Missing

Dear all,
in the system some billing documents are missing, when i try it to display it is showing no billing documents exsists.
if it is deleted, it should have shown cancellation docs atleast.
also no auto-archiving is active in the system.
pl help to trace those missing numbers.
Thanx

Hi,
Please check the OSS notes 24279 - Missing billing document numbers in VBRK and reasoning for the issue in Note 19050 - Gaps in document number sequence for billing docmts.
They might be of help to resolve your issue. The below thread also addresses similar issue.
http://scn.sap.com/thread/3257408
Thanks,

Miro number range

hi MM
i am sd consultant
i am doing incoming invoice in MIRO
but as i enter the T Code
i get a error Number range missing can i knw whr
what is tcode tp create a number range for MIRO
Regards
Vinit

HI,
Path is SPRO - MM - Invoice Verification - incoming Invoice - Number Assignment - Maintain Number Assignments for Accounting Documents
Tcode is OMR4 - this is parent transaction code which contain the below functionality
TCode MRM4 - to define the number range
TCode OBF4 - to assign the number range to the document type, RE and RN, Double click to assign the number range.
In the next step you define the document type for MIRO.
Thanks & Regards,
Kiran

CC01 how can i choice a specific number range ?

Dear
In trx. OS53 i have defined two different internal number range object for change master record.
When I create a new change master how can I choice a specific number range ?
Thanks.

Hello,
If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
object used is AENNR and where in you can assign a common number range group and it will be used for creating change
numbers of both these types.It's not as like the production order type where you can link a different number ange for each
order type.
In the standard SAP to set of number range (one internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal number range,where during CC01 without any value for the field change number you can proceed.When creating through CC31 you can make use of external number range by giving the change number as the input and you save the data.
Hope the information is useful
Regards

Copy plant without number range objects

Hi
I created new plant by copying from existing one.
I choose option not to transport Number Ranges. I got the message new plant was created without 6 number range objects.
After transporting customizing into test system I got errors due to incorrect number ranges (ie. during PO creation).
What number ranges I need to set up manually now in test and than in Prod so everytning is on right track?
thanks for hints.

HI,
SEND US THE ERROR MESSAGE WHAT YOU ARE GETTING?
BUT FOR INFO FOLLOW THIS,
TRANSACTION CODE:SNRO
Object :EINKBELEG
HERE ABOVE THERE IS ICON NUMBER RANGE SELECT THAT AND GO TO CHANGE INTERVALAND INSERT THE INTERVAL .
I HOPE THIS WILL HELP YOU

ECM-number range and authorization contorl doubt

Hello Team,
I have below scenario and need help on the same.
1) I need to differentiate change master and ECR with number range can this be done?
2) For Team A - need to give only ECR and change master active status control. For Team B- Only change master but in inactive status control How to achieve this?
3) I have created profiles with status profiles under enge change mang section , but how to make this field mandatory in CC31 or CC01 screen? I browsed and got info like should be activated etc...but i was not able to activate the profiles which were created in Engg. change management section.
Regards,
satish

Dear Satish,
1.If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
object used is AENNR and where in you can assign a common number range group and it will be used for creating change
numbers of both these types.It's not as like the production order type where you can link a different number ange for each
order type.
2.Try whether this option will work out for meeting your requirement.In the standard SAP 2 set of number range (one
internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal
number range,where during CC01 without any value for the field change number you can proceed.When creating through
CC31 you can make use of external number range by giving the change number as the input and you save the data.
check and revert back.
Regards
Mangalraj.S

Number range object missing NRIV and cant activate IOBJ during import

Hi,
We have a number object RS_OBJNUMG in BW used for many infoobjects. However object doesnt exists in table NRIV and import for infoobjects are failing with error:
Interval 01 of number range RS_OBJNUMG is missing
message R7453
I thought that as when infoobjects are created they get automatically assigned to number range....
Can somebody help?
thanks

hi,
check if the similar problem
Error calling number range object 0MATERIAL for dimension D4 ( )
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> choose the infoobjects>> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
hope this helps

Error during MIRO fpr number range .

Dear All ,
                                         Pl see the error below during Posting MIRO -->
In company code 1000, the number range 51 is missing for the year 2009
Message no. F5150
Diagnosis
The document type you specified has been allocated to a number range in fiscal year "2009" that has not been created.
Procedure
Check the configuration of the number range for the specified document type. Create this number range if it does not already exist or allocate a valid number range for the document type.
Note
Enter '9999' as the year if you want to use number ranges that are not dependent on a particular fiscal year. If you do this, the number range you allocate is then valid for the current and all following years.
If you want to use number ranges that are dependent on a fiscal year, you should create these manually for the years you require using the Copy by fiscal year function.
i m trying to maintain the same in FBN1 but an info displays as " Enter intevals without overlap "
Rgds ,
sap11

Hai
Thats what i am saying change the before using inerval range
Ex : 51 2009   1    9999999999999
         Here u can reduce the above number range like 99999 then you will get free intervals
        Check it once............
Regards
Madhu I

Missing orders in Number Range

Hi Friends,
We are facing an issue in our production systems where once in a while we find some orders missing in the number range provided. We have a custom report which tells us whenever a particular number on a sales document number range is skipped. Usually when this report identifies a missing order we will be able to find some error information from ST22 or SM13 logs and from that we identify the user who was trying to create this order and we contact them to re-enter the order. In most cases they are unaware that there has been an error since they get a success message when they save orders. But in some cases no information is available in these transactions and we are unable to identify who was creating this missing order and Business team fears that we are missing some legitimate orders which the customer thinks was created. I read thorugh lot of messages in the SDN forums and lot of similar issues were due to number range buffering but we do not have number range buffering set in our systems for sales documents. Have any of you faced this issue before and do you have a suggestion to prevent this?
Regards,
Praveen

Hi Praveen,
I remember that the module pool drwas a numer from the number range before the order is actually saved. If the creation process is cancelled, the number has been used.
You could try to check that by setting a break-point at function module NUMBER_GET_NEXT and then manually create an order, play around with the different tabs and views, create and delete items and check when the number is drawn.
If it is drawn as it should be in update task, you may find update fails in the update monitor and the users responsible should have received an express mail.
Regards,
Clemens

Missing PRCTR from Number Range Table

Hi There,
I need to find out all the the available profit centre which not created yet ie no profit centre available in CEPC from the number range table NRIV.
I tried the FM number_get_next but nothing happened.
Details given below:
In the NRIV table I have got say following details :
Object          From Number     To Number    etc     etc
Y_PC          0000000001     0000000100
Y_PC          0000000101     0000000150
Y_PC          0000000160     0000000200
Profit Centre Created Available in CEPC say
In the no range 1 to 100
     0000000001
                0000000002
                0000000003 (Not created)
     0000000004
                5 ,6 & 7 missing
     0000000008
In the no range 101 to 150
     0000000101
                0000000102
     0000000103
                0000000104 (Not created)
     0000000105
                6,7....upto 149...(Not created)
     0000000150
Similarly in other ranges few nos missing
My requirement is to read the NRIV table take all from number and to number into an internal table and for those nos find the missing nos from the CEPC table .
Appreciate your help.
Regards.
Sunanda

Resolved by myself !!
Cheers.

Missing numbers in Number Range

Hi all,
I have a requirement like this. When I do a standard process I need to generate batches depending on the cuts in the cable. I'm doing this using Number Range. After I get the batches I may save the document or may not save it. Suppose my first document generated batches 100,101,103,104. At the end if I dont save and exit for the next document the batches are coming as 105,106 ans so on. However since I didnt save earlier I need from 100. How can I do this?
Thanks&Regards,
Manjula.S

I don't think so. You have to understand that number ranges take care of concurrency. Hence you can have more application servers, more users running same program and SAP guarantees that you will get each number once. So generally implementing number range with possibility of returning number is really tricky thing and you have to be careful about concurrency. As I said, common approach how to avoid wasting numbers from number range is to use temporary numbers and during saving process replace these numbers by real numbers from number range.
Good luck

MB51- Missing sequent Doument number range.

Dear All,
Here when I execute transaction MB51,I am un able to get all MIGO (GR) Document in sequential, even though I have maintain input fields for MB51 only posting date from- to, but when I see MIGO documents in MB51few documents are missing. Where can we see those missing documents and why in between number ranges are missing?
Example :
MB51 number range(MIGO) showing like this 500000645 to 500000660 then, 500000667, 68,69, then 75. now i want to see missing number, where can i see and why it's happening like this.
Kindly advice me to get more things on this issue...
Thanks
Madhusudhan.B

For Eg..
Go to SNRo. choose overview.. YOu ll get a list. choose for eg AUFTRAg..THis is for production orders..
Double click .. you ll see No.Of numbers in the Buffer..It ll be set as 5 ,10 or 20..
If its 20 ,then 20 numbers will be thr in the bufer for assigning to the orders..
PLs check if its maintained...
At the time of server crash or something,This buffer would ve been reset...
That may be ur problem..
Please reset the value in the buffer as 10 or 20 and proceed ur GRs etc...

Number range missing during f-32

Similar Messages

Maybe you are looking for