Number Range Missing

Strange behavior is there in the system concerning the Number range as some Invoice Numbers are missing from the system for example after 111121..it is 111122..and then 111123, 24, 25 is missing then 26 is there and then 27 is missing and then 112228 is there, Buffer Management is not maintained for the SD Object RV_BELEG  and no archiving also
Any Suggestions where to look into for this.
Regards,
N

Hi
Goto VOFA for your billing document type and fetch number range assigned to that.
Goto SE11>Table TVFK>pass your number range fetched in above step as NUMKI and see which else document has assigned to it.
Pass same number to table TVAK to check whether sales order document has assigned to this number range.

Similar Messages

  • Number range missing during f-32

    hii
    while i m doing f-32 for customer clearing then system showing error msg...
    "In company code 1000, the number range 80 is missing for the year 2009"
    how  we will set number range?
    Thanks & Regards
    Rekha shrama

    hi
    Go to T.Code FBN1 enter C.Code 1000 and select chagne option.  add number ranges for 80 with applicable range.
    reg
    S. Habib Pasha

  • Number range missing in Miro

    While performing incoming invoice manually, I am getting an error  "In Company code ___, the number 51 is missing for the year 2008". I have tried to assign number through FBN1 but to no help.
    Any suggestion??

    Hi
    goto FBN1 and enter the company code and press the intervals icon with pencil.
    in the "maintain number range intervals:"
    enter the 51 as no and year as 2008 and from as 510000000 and to as 51999999999 just check the no ranges for the prevoious the range assigned to 51
    u can assign the same no range to 51.
    hope u r in IDES
    regards

  • Number range missing for characteristic 0AF_SEAN after importing request

    Hii friends,
    I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
    Then error which i m getting is ,
    Number range interval for characteristic 0AF_SEAN is missing
    Error when activating InfoObject 0MATERIAL
    Characteristic 0MATERIAL: Error when generating master data routines
    Error when resetting InfoObject 0MATERIAL to the active version
    I am waiting for ur positive reply.
    Thanks & Regds,
    Kavan Shah

    hi Kavan,
    try
    transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
    Error calling number range object 0MATERIAL for dimension D4 ( )
    or check oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07
    Transporting DataSources
    hope this helps.

  • Reg: Billing Document Number Range Missing

    Dear all,
    in the system some billing documents are missing, when i try it to display it is showing no billing documents exsists.
    if it is deleted, it  should have shown cancellation docs atleast.
    also no auto-archiving is active in the system.
    pl help to trace those missing numbers.
    Thanx

    Hi,
    Please check the OSS notes 24279 - Missing billing document numbers in VBRK and reasoning for the issue in Note 19050 - Gaps in document number sequence for billing docmts.
    They might be of help to resolve your issue. The below thread also addresses similar issue.
    http://scn.sap.com/thread/3257408
    Thanks,

  • Miro number range

    hi MM
    i am sd consultant
    i am doing incoming invoice in MIRO
    but as i enter the T Code
    i get a error Number range missing can i knw whr
    what is tcode tp create a number range for MIRO
    Regards
    Vinit

    HI,
    Path is SPRO - MM - Invoice Verification - incoming Invoice - Number Assignment - Maintain Number Assignments for Accounting Documents
    Tcode is OMR4 - this is parent transaction code which contain the below functionality
    TCode MRM4 - to define the number range
    TCode OBF4 - to assign the number range to the document type, RE and RN, Double click to assign the number range.
    In the next step you define the document type for MIRO.
    Thanks & Regards,
    Kiran

  • Missing orders in Number Range

    Hi Friends,
    We are facing an issue in our production systems where once in a while we find some orders missing in the number range provided. We have a custom report which tells us whenever a particular number on a sales document number range is skipped. Usually when this report identifies a missing order we will be able to find some error information from ST22 or SM13 logs and from that we identify the user who was trying to create this order and we contact them to re-enter the order. In most cases they are unaware that there has been an error since they get a success message when they save orders. But in some cases no information is available in these transactions and we are unable to identify who was creating this missing order and Business team fears that we are missing some legitimate orders which the customer thinks was created. I read thorugh lot of messages in the SDN forums and lot of similar issues were due to number range buffering but we do not have number range buffering set in our systems for sales documents. Have any of you faced this issue before and do you have a suggestion to prevent this?
    Regards,
    Praveen

    Hi Praveen,
    I remember that the module pool drwas a numer from the number range before the order is actually saved. If the creation process is cancelled, the number has been used.
    You could try to check that by setting a break-point at function module NUMBER_GET_NEXT and then manually create an order, play around with the different tabs and views, create and delete items and check when the number is drawn.
    If it is drawn as it should be in update task, you may find update fails in the update monitor and the users responsible should have received an express mail.
    Regards,
    Clemens

  • Number range object missing NRIV and cant activate IOBJ during import

    Hi,
      We have a number object RS_OBJNUMG in BW used for many infoobjects.  However object doesnt exists in table NRIV and import for infoobjects are failing with error:
    Interval 01 of number range RS_OBJNUMG is missing
    message R7453
    I thought that as when infoobjects are created they get automatically assigned to number range....
    Can somebody help?
    thanks

    hi,
    check if the similar problem
    Error calling number range object 0MATERIAL for dimension D4 ( )
    try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> choose the infoobjects>> execute. press button 'correct error' if any error exists.
    also try >> all combined tests >> master data >> check master data for characteristics.
    hope this helps

  • Missing PRCTR from Number Range Table

    Hi There,
    I need to find out all the the available profit centre which not created yet ie no profit centre  available in CEPC from the number range table NRIV.
    I tried the FM number_get_next but nothing happened.
    Details given below:
    In the NRIV table I have got say following details :
    Object          From Number     To Number    etc     etc
    Y_PC          0000000001     0000000100
    Y_PC          0000000101     0000000150
    Y_PC          0000000160     0000000200
    Profit Centre Created Available in CEPC say
    In the no range 1 to 100
         0000000001
                    0000000002
                    0000000003 (Not created)
         0000000004
                    5 ,6 & 7 missing
         0000000008
    In the no range 101 to 150
         0000000101
                    0000000102
         0000000103
                    0000000104 (Not created)
         0000000105
                    6,7....upto 149...(Not created)
         0000000150
    Similarly in other ranges few nos missing
    My requirement is to read the NRIV table take all  from number and to number into an internal table  and for those nos find the  missing nos from the CEPC table .
    Appreciate your help.
    Regards.
    Sunanda

    Resolved by myself !!
    Cheers.

  • MB51- Missing sequent Doument number range.

    Dear All,
    Here when I execute transaction MB51,I am un able to get all MIGO (GR) Document in sequential, even though I have maintain input fields for  MB51 only posting date from- to, but when I see MIGO documents in MB51few documents are missing. Where can we see those missing documents and why in between number ranges are missing?
    Example :
    MB51 number range(MIGO) showing like this 500000645 to 500000660 then, 500000667, 68,69, then 75. now i want to see missing number, where can i see and why it's happening like this.
    Kindly advice me to get more things on this issue...
    Thanks
    Madhusudhan.B

    For Eg..
    Go to SNRo. choose overview.. YOu ll get  a list. choose for eg AUFTRAg..THis is for production orders..
    Double click .. you ll see No.Of numbers in the Buffer..It ll be set as 5 ,10 or 20..
    If its 20 ,then 20 numbers will be thr in the bufer for assigning to the orders..
    PLs check if its maintained...
    At the time of server crash or something,This buffer would ve been reset...
    That may be ur problem..
    Please reset the value in the buffer as 10 or 20 and proceed ur GRs etc...

  • ITSM: Cancelled Change Documents - Number range goes missing

    Hi Experts, We create RFCs, Urgent, Normal, Admin changes. however when we "create change record/change doc" a number is assigned to the record/doc. Sometimes we cancel and come out of the Creation process and then again restart our process. This time the number assigned to the previous record is lost and then a new number is assigned to the new record. This way a lot of the numbers goes missing in the sequence when you do a full search of all records/docs. Is there a way to get over this issue? please advise.

    Hi,
    try with after unchecking  the "early numbering assignment" option in your ztransaction types.
    follow here Configuring & Reducing Gaps in Number Range for IT Service Management
    Thanks
    Jansi

  • T.code F-01, error message  F5150: the number range ...  is missing

    Hi All,
    creating by F-01 a 'sample document', SAP gives me the message F5150: "... the number range ...  is missing ..."
    But in OBA7 and FBN1 I can't find the missing range.
    Is there a different customizing step to create a range for sample document?
    Thanks
    Gandalf

    Refer this link.
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/96/8b434c43ce11d189ee0000e81ddfac/frameset.htm
    You can basically use the sample document as a reference while posting an accounting document.  Use T Codes FBR1/FBR2.

  • Transport Error like Number Range Inteval  for 0PRODID is missing

    Hello
    Iam transporting an infoobject  to Quality and got an error like Number range interval for 0PRODID is missing.
    But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
    can you pls let me know what to do.

    Hello prasanna
    Check with your Infoobject 0PRODID in Quality has got the Number range available.
    If not first generate the Number range or go with the RSRV run the test with Master and do the transport

  • Number range interval for characteristic 0CSTELMNTYP is missing

    All,
       I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP.  The transport moved fine to my Q environment, but not to prod,  The error was as above and
    Number range interval for characteristic 0CSTELMNTYP is missing
    Message no. BRAIN049
    Diagnosis
    The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
    Procedure
    Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
    I don't understand this - what do I need to do?
    Thanks.
    Dave

    Hi Kedar,
    I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
    For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
    When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
    Thanks for you help in Advance.
    Sudhakar

  • Missing Vendor Number Range

    Dear Expert,
    By mistake while uploading FI Vendor master to system we had given the Vendor Number in the template.
    The vendor number range is maintained as internal.
    All the vendor was updated and it is showing also.
    But when in system we try to create new vendor it is showing account already exists.
    We checked the number range the current Number is still zero.
    Is there any program or any method that we can bring this current status sync with existing vendor master we had uploaded into the system.

    Hi,
    check T-code XKN1, tick "status", update the current number to the needed one.
    Best regards, Christian

Maybe you are looking for

  • Reporting

    Hi every1, Please explain about these points... •     Created Update rules and Transfer routines/User Exits to harmonize the data for Global reporting. •     Extensively used Restricted Key Figures, Variables, Conditions, Exceptions and Calculated Ke

  • Prepare end user trainning document

    i have configured LSO and now my client want me to prepare end user training documents, please provide your inputs and guide me on how to prepare them , and some good tips on how to conduct the training

  • Mapping sensor data to process flows

    Hi, I´ve implemented a sensor-action that uses a JMS-queue to report its data. I´ve specified a few sensors in the process I´m calling as well as all processes called by that first one. This is ment to monitor the process workflow resulting in a grap

  • Can you  say internally what happens?

    String s1 = new String("ABCDEF"); String s2 = new String("ABCDEF"); if(s1==s2){ s.o.pln("true") }else s.o.pln("false") } here it gives false String a="xxxxx"; String b="xxxxx"; if(s1==s2){ s.o.pln("true") }else s.o.pln("false") } here it gives true

  • I cannot use editor. Sign In ID error

    When i try to open the editor for the trial it is trying to connect to the internet. and it tells me im not connected or to change my clock. How do i bypass this log in.