Number range not reflected in production

Hello SAP greats
While I am posting excise duty in j1ij it is taking the number range for the year 2008 and not the new one i have maintained in j1i9(j_1irg23d), please note that only a single plant is taking this previous number range.
note: everything is working well in development and testing servers.
Edited by: prad_bh on Apr 6, 2009 2:14 PM

Hi,
First of all it should be J1IG and not J1IJ for the system to select the j_1irg23d object. Since you don't have any posting date selection screen system will consider the material document posting date and the material document posting date must be previous period. So the problem exist. Check for the material document posting date.
Regards
Srinivas.P

Similar Messages

Order number range not define

Hi Experts,
when i create a production order system generate error massage " NUMBER RANGE NOT DEFINE ".
I have maintained OPJH (Number range also) and i have maintained CO82.
and order type also assign to number range group .
when i create production order in particular plant(1100) with same order type(PP01) then generate a error massage but when I create production order in other plant(2100,3100,4100) with same order type (PP01) then not a problem.
OPJH, OPJK, OPU3, OPL8 also maintained in this plant(1100) for this order type
Please suggest me
Thanks in advance............................

Please do the following
1. Double check in CO82-> Change number groups -> Double click the Production order type (PP01) change the number range & save.
2. As you specified its working well for the other plants 2100,3100,4100. Please check in OPL8 whether the plant 1100 is assigned to the specific order type or not. But CO82 is not plant specific its global change of number ranges for all the plants.
3. Finally if you are trying this with in development system, check with the basis whether the transport reqeust will take time to update.
Check and revert back.
Regards,
Sundhu

Release rejected - Number Range not found.

Hi,
Iam creating a Rework Order RW01 order type.settings are almost same as PP01.
When I try to release the order it shows Release rejected and check log .
In the log I find below message thrown.
" You must enter the batch for material XYZ
*Message no. CO691"
However when I the enter the batch manually add try to release it again it shows Release rejected and check log .
In the log I find below message thrown.
" Number range not defined
Message no. 26023
Diagnosis
You have enter number range for the document type, but this number range is not defined for the number range object "document".
Procedure
Check in Customizing (Document management -> Control data -> Number ranges) which number ranges are defined.
If you want to enter a number range that has not been defined for the document type, contact your system manager. It may be necessary to create a new number range."
I have done the number range for order type RW01 in CO82 as well .
Is there anything I miss in Order Type configuration or Batch Management.
In PP01 order type my Batch updates when I release my order , Same setting is for RW01 as well.
Production Scheduling profile is also same for both.
Regards
Bhgl

Dear,
Please check the number range in CO82 or OPJH for your order type RW01.
Also check the component has determine the batch.
In the release control is set to user to decide (TCO11-FRBATCH = '1') or release despite of missing parts (TCO11-FRBATCH = '2') in Transaction OPJK
For all these components it is stored in the material master that a batch determination should be executed before or during the release (KZECH = '1' manually, KZECH = '3' automatically) and no batches have yet been assigned to these components before the order is saved.
Regards,
R.Brahmankar

Number range not defined

Dear Sir,
When i creating production order in CO01 error is coming number range not defined.
Guide me where we defined number range for production order.i have maintained in co82
but the issue is not solved.

Go to OPJH
select your order type
And select the number range in Order type
select you order type and assign in Number range group
and then create a new order
Or Go to Co82
select Group
Your order type is in Not assigned
select your order and assign to group

I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know how els

I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know how else to find the serial number. Please help!

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Installed successfully, but can't update. Error "Serial Number is not for qualifying product"

I installed Adobe Creative Suite Production Premium (CS5) on a new PC (Windows 8.1). Installation was successful. I uninstalled it on old PC and de-activated it. My problem is that I can't Update. Without Updates, I can't read newer Canon photos (so I can't use Bridge or PhotoShop). In doing the install the first time, I put in an incorrect Adobe product number (I think from Elements 8.0, which I purchased years ago). I have re-installed twice using the correct serial number, but same result: I can't Update the programs and get a "Serial Number is not for qualifying product" error.. Please help. Dave

update manually, http://www.adobe.com/downloads/updates/

I own a copy of CS5.5 that I have on my PC. I have switched to a new iMac and during activation it says my serial number is not for the product I'm trying to activate

I own a copy of CS5.5 that I have on my PC. I have switched to a new iMac and during activation it says that my serial number is not for the product I'm trying to activate. I have tried live chat a couple times but it says that chat is not available.

Jb4short you can verify your registered serial number under your account at http://www.adobe.com/. You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you have a volume license serial number then you need to download the volume license installation files from https://licensing.adobe.com/.

Number range not foung when doing profit center distribution

hi
iam getting error message profit center number range not found when doing distribution in profit centers. can any one help me with this.
thanks
monica

issue is solved
thanks

Maitenance Plan - Number range not defined

I am trying to create a maintenance plan from a brand new system. When going to IP31 I get the error, number range not defined. So I went to SPRO and transported the number ranges. It still would not create a maintenace plan and got the same error. Am I supposed to assign the categories to the Maitenance plans number ranges? If so, how do I do this?
Your help is appreciated.

Hi,
There are two relevant number ranges - One for maintenance plan and the other for maintenance item. Customizing as follows:
-Plant Maintenance and Customer Service
-Maintenance Plans, Work Centers, Task Lists and PRTs
-Maintenance Plans
> >Define Number Ranges for Maintenance Plans
> >Define Number Ranges for Maintenance Items
Alternatively use transaction IP20 and IP21.
In the case of maintenance plan number range you must assign each category to a particular number range. Use the icon 'change groups' to do this.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

Production Order Number Range - Not Continuous

Hi Team,
I have assigned the internal number range for my order type in CO82. When the system assigns the internal number (my production order is 10 digit number) to my production order, the number is getting assigned continuously. For example, if the last created production order number is 2481000001 , i am expecting the next number as 2481000002. But system is creating some number like 2481000023. In-between many numbers are missed. Why?
Production Order Number Range Assigned: From: 2481000000, To:2481999999 (Internal Number range)
Thanks

Hi Caetano,
As described in the note 62077, i can do the following setting.
1. Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
2. If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
Case 1:
If i activate the option "No Buffering" for object "auftrag", will it have any negative impact like performance of the system?
Should i need to activate the option "No Buffering" for object "auftrag" before creating the production order?
Case 2:
I do not want to deactivate the buffering. But i will set the 'No. of numbers in buffer'as ONE (1). I think with this settings, the numbers will be always continuous. Will it have any system performance impact?
Thanks

Create number range and assign new product id

hi,
can anyone tell me the steps to create the number range and assign it to the product id..
and replace existing product id to the new one through program or.. is there any standard program is available to change the product id
thanks
dinesh

Hi Dinesh,
Agree with Arden, I think there is no number range feature for product IDs. You can have your own number range object and intervals with custom solution on UI to create product IDs sequentially.
I am not sure but have a look at the TCode: COMC_MATERIALID_ALL which may be doing what you need.
You cannot change the product ID once created I think.
You can change the category assignment of the products through the report : COM_PRODUCT_RECATEGORISATION
Check enhancement spot : CRM_PRODIL_EXIT which has got some methods for CREATE and MODIFY Products.
Hope this will be useful.
Regards,
Naresh

Document number range not creating in Ecc 6.0

Hi
I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
Urgent please help.

Hi Sidhu,
It could be the limit of the authorization.
So try to check whether you have an authorizatin to change the interval or not.
Hope it helps.

MR11 Number range not found.

Hi Guys,
When I am executing MR11 , I am getting the error message that
For object RE_BLEG the Number Range 04 does not exist.
Why does it occur and can anyone tell me where I can adjust this.
Thanks
Srikanth

Did you mean RE_BELEG? If go to tcode SNUM. Type in RE_BELEG as the object add, then go to number ranges, then go to change nuimber ranges. Add 04 and the number range you want for these postings.

Changes to HTML template not reflected in production

Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
Shruti

Hi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine

Number range not created in SNRO for new created Z-Infoobject

hello all,
I created a Z Infoobject of a SAP delivered infoobject, basically I went to RSD1 used template 0COSTCENTER and creater a Z object of same to add few more objects as attr and test something.
Now I am trying to run the FM "RSD_IOBJ_GET" to get the number range, which I am able to do succesfully by using the ZINFOOBJECt name and object version "A" and I_BYPASs_BUFFER = "X". i get the number range, go to tcode SNRO and input BIM and the number range i got from previous FM but it says the number range does not exist?
My question is when is the number range created? I am trying to improve load time by doing the number range buffering.
Please let me know, thanks in advance for replies.
Thanks

Hi ,
When you use this FM "RSD_IOBJ_GET" , the number range object will be in table "E_S_VIOBJ". Double click on this and look at the number in column "NUMBRANR". Add the "BIM" in front of that number to get the required number range. Then go to tcode SNRO. In the field -"OBJECT", provide this number range object (for eg . BIM0076070). Then click on display or maintain. This will give you the Number range object for the master data infoobject and also the details if it is bufferred or not. You can follow up accordingly then.
Hope you followed the same process to get the number range object.
Also, have a look on the below link to get details :
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a6e3ff-f000-2d10-b59d-8ef35e248f83?quicklink=index&overridelayout=true"
Regards,
Sarika

Number range not reflected in production

Similar Messages

Maybe you are looking for