NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

Hi ,
I am getting a message at production order release i.e.' NUMBER RANGE OBJECT DOES NOT EXIST' in CO01 for one order type whereas i am not getting for other.
I maintained the order type in SNRO so order is getting created.

Hi
Maintain the N Range in T code SNRO for No Range Object AUFTRAG and also in t code CO82 assign the no range maintained in SNRO to the corresponding Order type by maintaining in GROUP in CO82
Plz check and revert
Regards
Anupam Sharma

Similar Messages

0FISCPER : number range object does not exist

Hi,
We have got this error while trying to repair the infoobject :0FISCPER in RSD1.I have tried doing the repair but it did not work.I tried to create a new no range by snro but i was not able to do that.
Can some pl help

Hi
Use RSRV for this purpose
There is a tab of master data in that u find lot many test even u can pull all elementary tests tab to the right side and perform all the tests or even u can pull one among the all tests ie number range interval to the right side enter your infooobject name and execute it and then press correct errors
thanks
puneet

For object XABBELEGNR , number range interval does not exist OMJ6

Dear all
I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval does not exist OMJ6.
Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
regards
M.Chandra mohan

hi
u just go to tcode omc1.
activate gr/gi slip for plant
then create number range group code and assign it to plant ,storage location and movenent type combination.
Then u can create the intervals thru OMJ6.
Hope it helps
rewrad if useful
Rohit

Object ROUTING_N number range 01 does not exist

My students all have this error, "Object ROUTING_N number range 01 does not exist", when they create and save routings. I tried to configure it using transaction code OP8B and OP62 as someone else suggested here. However, it still doesn't work. Anyone can help? Thanks a lot!

It didn't work, either.

For Object RV_BELEG, number range SD does not exist

Dear Gurus,
I have created a sales order VA01 with 1 material, and when I try to print the invoice, I have the following message of error:
'For Object RV_BELEG, number range SD does not exist'
I have checked my output types, they have been rightly assigned to the invoice forms.
OK, so If I have to assign number ranges to sales documents, how can I do that? Do I have to talk to FI guys to?
Please help.
Regards
Christian

Thats SD numbeer range that is missing. Each invoice has two numbers one in SD and one in FI.
Just go to SNRO type RV_BELEG and maintain it (the name of the number range you have in your billing document type setup in spro)
Piotr.

Number range 01 does not exist

Hi Gurus;
I am trying to create a Interest rate instrument with Product type 55G and Transaction type 200. Though the number range is defined in : SPRO  CFM  Basic Functions  SAP Business Partner for Financial Services  General Settings  Business Partner  Basic Settings  Number range and grouping  Define Number Ranges has No. Range as 01 but whenever I am trying to create this instrument for a particular co. code it is throwing an error as "Number range 01 does not exist". Has anybody got any idea for what to do?
Regards;
Sumanta

Your error message is related to treasury transaction number and not about business partner number range. Please check the following path and maintain number range:
FSCM-TRM-Transaction manager-Money Market-Transaction Management-Transaction types-Define number ranges
Transaction Code : TAC1.
If this will not solve your error please try to have a look at the detailed error message and get back to the forum.
thanks,
Kumar

Number range "PO" does not exists *****Classic

Hi Friends,
We are in SRM 5.5 and classic mode is on and we require backend PO to be created. We have replicated all data from backend and trying to create a PO (ECDP Direct Material) and when we click the create button in 'Process Pur Order' it does not allow to create a PO and gives error "No range PO does not exist". The same error is thrown while we convert an accepted Bid into a PO from Bidding engine. We have made the following settings.
Classic mode is on.
internal No Range "PO" created in SRM under shopping cart and follow on document.
Defined trnsc type ECDP and assigned this no range PO to it. It is Active.
Defined External no range "PO" in ECC B/E client with matching range. (Marked external)
Defined Doc Type ECDP in ECC and assigned this no range to it.
In SRM under "Define Number Ranges per Backend System for Follow-on Documents" Maintained Log Sys as ECC Backend client and "PO" in PO number range.
Also all relavent attributes are maintained including BSA.
Is there any sttings which are missing how can we locate the problem. Any help in this would be highly appreciated.
Also post this are there any special tips for PO Creation and transfer from Bidding Engine in Classic Mode? where can I find the links?
Answers will be surely rewarded. Thanks
Hussain

Hi Guys,
appologies to reply late. Actually the resolution is taken from the SDN itself with little changes.
What we resolved is to fool the system by passing an ACC with a dummy cost centre.
use ECC BADI u2018BBP_BADI_EXTREQ_OUTu2019 to assign a standard ACC but with a dummy cost centre.
the SRM process for direct material is hardcoded hence this converts the direct procurement into indirect. The SRM SHC will contain the cost assignment tab.
Now when you process this document and generate a PO the document type should be ECPO and then it will pick up the number range defined under "Shopping Cart and follow-on documents".
**For a Direct Material system is hardcoded to look for a local number range irrespective of your scenario.
Now while creating a PO from SRM use BADI BBP_CREATE_BE_PO_NEW to check if the dummy cost centre exists then remove the CC and the ACC before creating the backend PO. The ECC PO will be that of direct material type.
Thanks
Hussain

Error-For object GL_LOCAL GBU1, number range interval does not exist

Hello experts
I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015. I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
Please see the attached screenshots.
Thank you.

Hi Rahul
Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed. So, I just executed tcode GB02 and went straight to Interval --> transport.
Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

Object does not existis in applicant number

Hi,
While ubdating the infotype 0024 to the applicant. i m getting the error object does not exists in applicant number.
Pls let me know how to solve this issue.
Thanks and Regards,
Revathi.

Hi,
Thorugh PB10 i have created applicatn number 12.
Then PB30 i have to mantaintain 0024 infotype.
In this i m getting that error.
I cheked the tables.
This applicant numbers are not sitting in the table.
0001 is also unable to maintain. for the t705k i m getting the error
i Checked this table it is ok.
Pls let me know how to solve this issue.
Thanks and Regards,
Revathi.
Edited by: Revathi on May 9, 2008 9:49 AM
Edited by: Revathi on May 12, 2008 7:17 AM

For object RV_BELEG , number range interval does not exit

I am receiving this error when trying to generate billing document type L2 for a newly created company code.
Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
Any thouhgts ?
-Mark

Please check if the error is
"For object RV_BELEG , number range interval does not exit"
"For object RV_BELEG , number range interval <b>10</b> does not exit"
10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
Also Check
If you are using
Include program : RV60AFZZ
Routine: USEREXIT_NUMBER_RANGE
If so then for each plant you have assign a number range for each billing type (L2- here).
Thanks,
Ashish

Object does not exist : MESSAGE OL 826 - Production issue

R/3 release 4.6C
Transaction: FB03
Custom WF: Triggering events: FIPP-CREATE and FIPP-COMPLETED
When we try to post a document (journal) the workflow gets triggered and reaches the approver. The approver approves it and then it gets posted.
Here in this case, after the approval the workflow running into error with u201Cmessage OL 826 Object does not existu201D
When I click on the message I get this information
Object does not exist   :   Message no. OL 826
Diagnosis :   You tried to create an instance of the object type EMPLOYEET with the
                    key 1234520080603. No instance of this kind exists.
                PERNR u2013 12345
     Date      - 03.06.2008
I checked this using the FM P_EMPLOYEE_CHECKEXISTENCE and it is working fine there. This FM is used in EMPLOYEET object for existence check.
Initially I thought the problem was with document and the buffer but after checking u201Cdiagnosisu201D message, it confirms me that this is related to Employee.
This is happening only to one employee and all other have NO issues.
I have checked with HR team and they reckon everything is fine from their side.
Since this is in Prod I am unable to debug and test.
I was looking into the previous forums to find the solution but couldnu2019t find RIGHT one. Could you please suggest any solution for this ?
Your help greatly appreciated.
Sreethan
Edited by: SAP User on Jun 12, 2008 12:13 PM

Dear Mike/Martin,
        Could you please explain a bit about the authorization problem?
        PERNR    A, B, C, and D do the posting the docs through FB01 and PERNR X usually do the approvals. the problem is happening onlyl with PERNR A ... if the approver has the auth problem then it could be same issue with other... please correct me if I am wrong.
    As Martin suggested I have contacted HR team but they say .... they dont see anything different or changes for this EMP. The personal record is coming from the EVENT FIPP-CREATE or COMPLETED so there is no manual interaction.
Just guessing: if this is the problem for all the employees then what could be the reason ? guessing that in random it is happening to this emp. He has posted 6 docs....all of them have the same issue. I checked last 3 months records and I did see Couple of workflows in last 3 months with the same error.... so just thinking if this is the problem with all emp happens onlly ramdomly.
Thoughts ??
Thanks & Regards,
Sreethan

ORA-12545: Connect failed because target host or object does not exist

Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
Robert

Hi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun

"ORA-21700: object does not exist or is marked for delete" select from ADT

Posted this in OLAP section as well, but since this is Object technology, I thought I would repeat it here. Sorry about the duplication.
BTW, I'm using Oracle9i 9.2.0.4.1.
I'm trying to create a script that can automate the process of generating abstract data types for use in an OLAP_TABLE function. I'm following the examples in the documentation. Everything runs great the FIRST time I run my script, but when I drop my types and re-create them, when I run the next SELECT statement against the OLAP_TABLE function, I get:
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
My script drops the ADTs before creating, but somehow they are not REALLY being dropped.
SET ECHO ON
SET SERVEROUT ON
DROP TYPE ts_table_6;
DROP TYPE ts_row6;
CREATE TYPE ts_row6 AS OBJECT(
CONJ2002 VARCHAR2(400),
CONJ2002_DATA number(16),
PERIOD VARCHAR2(10),
PERIOD_NAME VARCHAR2(20));
CREATE TYPE ts_table_6 AS TABLE OF ts_row6;
SELECT CONJ2002, period, period_name, conj2002_data FROM TABLE(OLAP_TABLE(
'REFVLMTA DURATION QUERY',
'ts_table_6',
'limit CONJ2002 to first 3',
'MEASURE CONJ2002_DATA from CONJ2002.DATA
DIMENSION CONJ2002 from CONJ2002
DIMENSION PERIOD from PERIOD WITH
ATTRIBUTE PERIOD_NAME from period.name'));
Again, it works the first time, but not the second time. I need to bump up the ADT names to ts_row7 and ts_table_7. SQL Plus says the types are being dropped.
Any ideas?
Dan Vlamis [email protected]

Hi Dan
What append if you do a connect between the DROP and the CREATE statements?
Chris

Get ORA-12545: Connect failed because target host or object does not exist

Hi all,
My database is in RAC on a RHEL 5 and oracle 10.2.0.4 release, when i connect from client at the first time it's connected and after exit and connect again it gives the error ORA-12545: Connect failed because target host or object does not exist. and trying to tnsping i can reach the server and connect again it's connected and after disconnect and reconnect it gives the same error.
Here is my tnsnames from windows client:
CDRMGRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.116)(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.117)(PORT = 1522))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cdrmg)
In this tnsnames , i'm using the virtual ip address.
Thanks for your help
Lucienot

hi,
check the ping trace.. for how long the connection establish..
check whether its breaking ,.
regards,
Deepak

BUS2080 "OBJECT DOES NOT EXIST" error message....

Hi Gurus,
I am trying to create a workflow for Service Process Notification in SWDD using BO BUS2080 . The Work Flow is activated without any errors but when i enter the instance number it comes as "OBJECT DOES NOT EXIST".
I created a subtype for BUS2080 ,delegated the object and i am using the parent object in my work flow.Please help me out in executing my Work Flow.
Thanks,
Syed.

Please check first in SWO1 whether the object instance exist or not. I hope you are giving the right key fields. First test with correct key fields thru SWO1.
<b>Reward points if useful</b>

NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

Similar Messages

Maybe you are looking for