Number Range Object For following object is not maintained for year 2008,

Hello Together,
Now the 2008 year has begun.....All the number range object in Excise related process ( CIN ) has to be changed.
I would like to know whether i need to change the only Year in SNRO or i have add new year in that setting.
Below is the example :-
Ranges   Year      From Number       TO Number   Current Number
01           2007     001000000            99999999     10001013
If i change only year i,e. insted of 2007 i will change 2008....what will be impact?
Please guide
Thanks in advance
Shailesh

go to J1I9-select the object--here maintain a new year for the same number range:
Ranges Year From Number TO Number Current Number
01 2007 001000000 99999999 10001013
01 2008 001000000 99999999
give enter---save.
regards,
indranil

Similar Messages

  • The number range is not maintained for Object/Year: J_1ILIC/

    Hello,
    I am facing the problem as
    After Created the No range object j_1ilic for excise bond, for capturing the CT3 form in J1ILIC01 and maintain the required fields in J1ILIC01, following error is occuring
    "The number range is not maintained for Object/Year: J_1ILIC/"
    Kindly advice on the same
    Thanx in advance
    Shailesh

    Hi,
    You will have maintain the Number range for the Lisence for the object J_1ILIC through SNRO.
    Regards,
    Murali

  • Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

    Hi Gurus,
    When I try to capture deemed export license from J1ILIC01 I get this error
    The number range is not maintained for Object/Year: J_1ILIC/
    I tried to maintain number ranges in SNRO & SNUM  there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

    Hi
    Just check if you have maintained number range for the correct year as shown in error.
    Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • Object type not maintained for message type

    Hi,
    I am working on chnage pointers for Vendor classification data. when I execute the program RBDMIDOC (BD21) I get the error Object type LIFNR not maintained for Message type.
    If anyone has worked on change pointers, please guide me in solving this error.
    Thanks
    Hari

    Hi
    Which msg type u r using there.
    Regads,
    Prasad.

  • Number range for trans./event type WE in year 2008 does not exist ?

    Hi,
    When I post goods receipt ( MIGO) I got the error :
    Number range for trans./event type WE in year 2008 does not exist
    When I modify with OMBT  ==>
    1999     0002000000     0002999999     0
    2008     8000000000     9999999999     8000000000
    But I still get the same error , So Could you please help me this ?
    Thanks

    Hi
    With the present settings, you can post the docuemnt in the year 1999 witout any error. But, if your requirement is to post to the current period then you have to maintain the company code for materials for this period.
    To maintain the company code, go to transaction MMPV and enter the company code as 0001, posting period as 05 and year 1993. Once the transaction is complete, again enter for 06/1993. You need to execute the transaction month wise from 05/1993 to 06/2008.
    Alternatively, you can create an LSMW for the same and maintain the company code.
    Finally check whether the period 06/2008 is appearing in OMSY transation.
    Regards,
    Sunil.K

  • T-Code J1INCERT:Acknowledgement number is not maintained for the quarter

    Hi Gurus
    While executing the T-Code J1INCERT, the system throws the following error:
    Acknowledgement number is not maintained for the quarter
    Message no. J1IN016
    But we have maintained the Acknowledgement number in Table: J_1IEWT_ACKN,
    Please throw some lights on it.

    Hi....
    You have to update to this table : J_1IEWT_ACKN_NUM or J_1IEWT_ACKN_N at quater level (Q1,Q2,Q3) ,after that you have maintain the number ranges  based on the Object name : J_1ICERT,J_1ICHLNNO, in SNRO t.code
    I hope will get solution...
    Regards
    vamsi

  • Number group not maintained for CO code OIAL section IBT194CMUM and busines

    Hi
    while executing J1INCHLN following error is coming
    "Number group not maintained for CO code OIAL section IBT194CMUM and business place 194C"
    can any one explain.  i have maintained all number range groups and intervelss

    Hello
       Go to SM30 and check the below table whether number range information maintained or not.
    if not maintain then maintain and transport from here.
    J_1IEWTNUM            INTERNAL NO RANGE FOR CHALLANS- EWT INDIA
    J_1IEWTNUMGR     Number Groups For Internal Challan Numbers- EWT India.
    J_1IEWTNUMGR_1     Number Groups For Internal Challan Numbers-EWT India:SECCO
    J_1IEWTNUMGR_N     Number Groups For Internal Challan Numbers-EWT India:SECCO
    Still problem continues revert back,
    Regards,
    Sankar
    Edited by: durga sankar on Feb 9, 2009 11:35 AM

  • Number group not maintained for CO code 1000 section IEQ1000 and business p

    Hi SAP gurus,
    while i am trying to create the remittance challan in the easy access screen with the tt.code J1INCHLN an error message is coming like "Number group not maintained for CO code 1000 section IEQ1000 and business place 194C". Can anybody suggest me how to solve this. Points will be assigned
    Regards
    Curtis

    Hi,
    Check the following information once again...
    Use the following path:
    SAP Customizing Implementation Guide >> Financial Accounting>> Financial Accounting Global Settings >> Withholding Tax >> Extended Withholding Tax >> Postings>> India >> Remittance Challans >>
    Maintain Number Groups
    Assign Number Ranges to Number Groups
    Maintain Number Ranges
    1.Maintain number groups
    co.code Sec.code official w.h.tax key no.group
    1000 1000 194c 01
    2.Assign Number Ranges to Number Groups
    Number group Int nr
    EX: 01 01
    3.Maintain Number Ranges
    click on change intervals
    enter the relevant company code
    ex:
    Year From number to number current number EXT ...
    2008 1000000 1999999
    Check with previious no.ranges, if this is the first time use the new number range or existing number range
    It will resolve ur issue.
    all the best

  • Number group not maintained for WITH HOLDING TAX challan

    Dera frends can you help in solving the problem.
    I have configured WHT it is posting well in vendor a/c and posting in tax account too. but while executing remittence challan System giving message " number group not maintained for CO code xyz section IEQEWT! and business places 194c.
    where company code - XYZ
    official withholding tax code - 194c
    business place EWT1.

    Hi
    Pls follow the path
    IMG>Financial Accounting (New)>Withholding Tax>Extended Withholding Tax>Postings>Certificate Numbering for Withholding Tax
    Pls assign points if the information is useful to you
    Regards
    Sanil Bhandari

  • Number group not maintain for company code

    Hi goodmorning,
    I am doing withholding tax. after completion of configuration setting i execute remittance challana at that time system showing  NUMBER GROUP NOT MAINTAIN FOR COMPANYCODE 1001 SECTION IBT100I 194I AND BUSINESS PLACE.
    company code 1001,
    Section code 194i,
    Business place 100i
    But  i maintain number group , number range and assign nuber ranges to number grop
    please give reply
    regards
    suresh

    pls number range and group assign in sap stadared group.

  • WHT - Number Group not maintained for co code 1000 S.code IEQ 5400

    WHT experts
    I got the error when I create Remittance challan (J1INCHLN) that
    Number group not maintained for co code 1000 section code IEQ 5400 and Business place 194H
    I have defined Number group for Challan though I got above error
    This is in Prdn system. So pl give me solution asap.

    Hi,
    Assign number number ranges to section code and business place wise and attach business place and section code. go to sm30 and specify manually
    J_1IEWTNUMGR_1     Number Groups For Internal Challan Numbers-EWT India:SECCO
    J_1IEWTNUMGR_N     Number Groups For Internal Challan Numbers-EWT India:SECCO
    J_1IEWT_CERTNO     Number Ranges for Withholding Tax Certificates
    go ahead with this path Spro-sap img-financial accounting-fa global settings-withholding tax-extended withholding tax-basic settings-south korea-define section codes.
    hope this is clear, if yes assign points any problem revert me back
    Regards,
    Sankar

  • Number group not maintained for CO code AM01 section IEQMGND --??

    Hi All,
    While i am doing T.code J1INCHLN the following error is coming
    Number group not maintained for CO code AM01 section IEQMGND and business place 194C
    Message no. 8I704
    were to give Number group for my WHT??
    Good day!!
    Regards,

    hi
    maintain the entry in SM30 for J_1IEWTNUMGR_1
    same as u maintained in remittance challan number group
    This hidden transaction in ECC 6
    for eg
    Company Code :  Section Code : WHT Code: Number Group
    N001                      N001              194J         01
    Thanks
    SAPUSER5

  • Number group not maintained for CO code 1100 section IBTCBDNNGPR

    Hi Friends,
    While doing TDS challan i am facing the error loke "Number group not maintained for CO code 1100 section IBTCBDNNGPR and business place 194C". But for other section code like INDR and section 194C the same error is not showing.
    I checked the config for challan number range, there i didn't maintain any combination of section code and section but i maintained the number group and the no range for the group.
    Still i am facing the error.
    Please advice me.
    Regards
    Mrutyunjaya

    hi,
    Check table J_1IEWTNUMGR_1, if you had not maintained anything , Maintain the same in SM30.
    Thanks and regards
    Praveen.J
    Edited by: Aspire FICO on May 18, 2010 10:45 PM

  • Number group not maintained for CO code 1424 section IEQ1424 and business p

    while create remittance challan....  this error accured Number group not maintained for CO code 1424 section IEQ1424 and business place 194C...     using T- code: J1INCHLN

    Hi,
    Number Group and Number range not maintained for the  Business Place /Off. w/Tax Key in T.code J1INUM or In this Path  : SPRO Financial Accounting (New)-Withholding Tax-Withholding Tax-Posting-Posting-Remittance Challans-Remittance Challans -Excute and Maintain the Number Group and also for the Number Group ,Manain the Number Range in J1INO T.code 
    Once you do the above customization, the Mentioned Error will be cleared.
    Thanks
    Goutam

  • Acknowledgement number is not maintained for the quarter

    Dear All,
    At the time of TDS certification using T code -- J1INCERT
    we are facing error massage *Acknowledgement number is not maintained for the quarter*
    Message no. J1IN016
    please help me to resolve.
    Thanks
    juhis

    Dear All,
    Thanks
    I have maintain same as those maintain in answer but still we are facing same error
    I want one clear fictions about the number range we have multiple section code how we maintain number range currently we have maintain just like exam---
    J_1IEWT_ACKN_N,J_1IEWT_ACKN
    Client  Company Code      Fiscal Year    Section Code     Period      Ackn Number
    000              000                 2011                 13                  Q1             001
    000              000                 2011                 13                 Q2              001
    000              000                 2011                 13                 Q3              001
    000              000                 2011                 13                 Q4              001
    Same as for current fiscal year
    000              000                 2012                 13                  Q1             001
    000              000                 2012                 13                 Q2              001
    000              000                 2012                 13                 Q3              001
    000              000                 2012                 13                 Q4              001
    Same as for Next fiscal year
    000              000                 2013                 13                  Q1             001
    000              000                 2013                 13                 Q2              001
    000              000                 2013                 13                 Q3              001
    000              000                 2013                 13                 Q4              001
    Just like all the Section code (around 25) we have maintain but we give the same number range it correct or we have deferent number range for Q1,Q2,Q3,Q4
    Please suggest me
    Thanks & Regards,
    juhi

Maybe you are looking for

  • Justifying a text in a textbox

    I've got a ridiculous problem, but there's no way to find the way. The think is that I can't justify the text in a textbox of a book. I found a similar post in that forum that solves the problem. There is said that I've to select the textbox and not

  • How to get and save the incoming filename in to db in biztalk.

    Hi, I need to save the incoming file name in to a table in biztalk. Below are the steps which are needed 1) Need to get the incoming file in orchestration 2) Map the incoming file in to field from source to destination schema(db) - such that file nam

  • Airport Extreem/Airport Utility Issue

    I have a an Airport Extreem SS#6F6513DGTTF which has never been updated. I purchased this back in about 2007. When I had Airport Utility 5.6.1 I set up the Airport Extreem in my home. However, once I upgraded my OS the Airport Utility has never been

  • Device drive of lab view fpga 2013 for Spartan 3E FPGA

    Hi NI I has get labview 2013 but I need  FPGA device drive of Spartan 3E can NI release it for us !!!!!!!!!!!! best regards hi ?Q>

  • Language problem..while issuing output

    Hi, When I click on the print preview buttion while issuing output for a invoice, I get the following error..Invoice is in Japanese <b>"Language environment settings for language J cannot be made at this time"</b> Any help on this is highly appreciat