Number range object issueing the numbers randomly

Hi All,
We have created a number range object and used in a program,but it is issuing the values randomly if it is issues 8 yest ,today is issuing 7 .
do any any idea on this issue?
Regards
Channa

Hi,
Please check the number range configuration.
[Number Range Example:|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=50004015]
Shiva

Similar Messages

Number range object issue

I have created a new number range object in SAP and transported the same to quality system.
But only the name has gone but the number range has not been reflects in the Quality system
why?

Hi,
Activate the number range object and execute the report 'RV80HGEN ' in SE38.
Thanks & Regards,
Rajani MV.

Mass Number range buffering issue

Hi ,
We are facing issue with the buffering of mass number range allocated to document type of cheque lot. While executing transaction FP25 system is giving error "No free number range is found for document type xx". We have checked the object FKK_BELEG in SNRO there "No Buffering" is defined and also in number ranges its showing enough numbers to be used. Mapping in the system for mass processing is like that :-
DT From To Status
X2 0XX00000000 - 00XXXXXXXXXXXX - XXXXXXXXX693
Also while in initial postings system always take alternate numbers for posting.
Any suggestion to resolve this will be highly appreciated.
Thanks and Regards
Kumar

Hi Ashwani,
Please refer to the following thread which discusses the same issue-
FKK_BELEG number range object buffering
The solution to the buffering issue would be configure the mass number ranges.
Hope it helps...
Thanks,
Amlan

Problem of number range object

hi experts,
the user use PA40 to record events and create an employee, the user wants the system to warn if the total number of employee beyond limits.
so i found an exit 'PBAS0001' and implements it, if the total number beyonds limits, and popup to warn user and exit. But the number of employee is got from the number range object. when the program runs to the PBAS0001, the number range object has already add one, and next time when employee created, the employee number wouldn't be continuous.
if the employee number must be continuous, so how to solve this problem? or is there other exit fm runs before the number range object adds? i found an exit named HRBAS00_STRUAUTH runs befor the range object but the necessary parameter is not all ready.
hunger for your advices, and thanks a lot.

hi,
please describe in a more detailed way ....
when you start the transaction the numer is for examle 2000 you save the employee. And now you start your transaction again which number is shown now ?
regards

No SID Number Range Object Found

Hi, Just curious.. I created an infoobject and I found that there is no number range object BIM*** for the sid. When I do an RSRV I get the below listed message:
Any ideas what this means?
Characteristic ZSOUTLET2 does not get its SIDs by using a number range object
Message no. RSRV276
Diagnosis
Characteristic ZSOUTLET2 has another SID award mechanism by using a number range object. Therefore, this test is not meaningful for ZSOUTLET2.

If the InfoObject is of type DATS, TIMS or NUMC (with length < 9) no need for number range object, because the characteristic values are equal to the SIDs --> SIDs are retrieved by using the characteristic values.
Hope this helps.
DN

Sequential numbers in non-buffered number range object

I need some help pointing in the right direction to analyze and prevent a problem with a NON-BUFFERED custom number range object.
This process works well. Once or twice however, sequences have been created with an apparent delay and are out of order. I don't know why, or where to look to diagnose the timing, etc. It's very difficult to recreate.
We have a custom number range object; ZFSEQ in SNRO that is responsible for assigning a sequential number to a series of flat files produced by number of different interfaces. Those interfaces all use the FM 'NUMBER_GET_NEXT' and then they build a file name with that sequence number. That object is not buffered.
During heavy volume of updates (where lots of these sequences are being called and created by different interfaces, the table NRIV is locked and released by each interface. During this time of heavy updates, we have an infrequent problem that has occurred where a standard sales order create created a sequence number that is greater than the sequence number generated by the delivery create. (The delivery was created a couple of minutes later than the order, yet the order created a flat file sequence number greater than that of the delivery.
I hypothesize that the flat file call for the order (using the FM 'NUMBER_GET_NEXT') was somehow delayed(because of heavy lock/usage of NRIV). The actual order document and delivery document were created normally. I also am thinking that buffering on the object would prevent this. I cannot at this time implement buffering on the object, but we are working towards that.
The order create originates from our e-commerce system through a webserive, and in SAP, flows like this:
Main webservice RFC:     Z_ORDER_CREATE
          Call Z_create_order_bgd IN BACKGROUND TASK
                                  Call BAPI_SALESORDER_CREATEFROMDAT2 )
                                   MV45AFZZ--> userexit_save_document.
                                        call Z_FUNCTION_TO_GET_SEQUENCE
                                                  CALL FM 'NUMBER_GET_NEXT'    <---- order create sequential file created
          commit work.
The delivery sequential file is created in
     MV50AFZ1 (the Delivery User Exit)
Where can I look to conclusively see what happened to delay our sales order sequence? What could be done to prevent it?
Thanks
Jeremy H.

Just want to post the answer that we found to this issue and close it, though more comments are always welcome!
We are going to move forward with buffering the Z object for the range as studies have shown and all other consulting input seems to be that buffering will solve this problem.

Number Range object skipping numbers SAP

Hi All,
Number Range object skipping numbers SAP "EINKBELEG" . While creating Purchase order with transaction code me21n, the purchase order is skipping odd numbers. I have checked the transaction code "SNRO" there is no buferring set on the object.
Please help

Are multiple users creating Purchase Orders at the same time?
If yes then this is possible. Because Number Range (unique Number) is assigned to Purchase Order at the start of the Transaction (ME21N).
Thus if multiple users are creating Purchase Orders at the same time & some of these users may have not saved the Purchase Order after partially creating it... This may lead to particular Number Range to be skipped as the following number is already assigned to some other Purchase Order.
Hope this helps,
Thanks,
Jignesh Mehta

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
      vl_char(6) type c,
      vl_qty type INRI-QUANTITY,
      vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
    NR_RANGE_NR                   = '01'
    OBJECT                        = 'ZRG0000001'
   QUANTITY                       = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
IMPORTING
   NUMBER                        = vl_num
   QUANTITY                      = vl_qty
   RETURNCODE                    = vl_rc
EXCEPTIONS
   INTERVAL_NOT_FOUND            = 1
   NUMBER_RANGE_NOT_INTERN       = 2
   OBJECT_NOT_FOUND              = 3
   QUANTITY_IS_0                 = 4
   QUANTITY_IS_NOT_1             = 5
   INTERVAL_OVERFLOW             = 6
   BUFFER_OVERFLOW               = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

Interval 01 was not created for number range object HRTEM_REFN

Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!

Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha

Document number range object

Hi
Please tell document number range object . T-code :FBN1
PLEASE URGENT
Thanks
Krishna

Hello
A number range must be assigned to each document type in the SAP System. Via the document types, you distinguish the postings according to the different business transactions, for example customer payment, vendor credit memo, and so on. To store documents separately according to document types, you must assign a separate number range to each document type, for example to invoices or to credit memos.
In the following activities:
You define your document number ranges.
You can determine which intervals of document number ranges are to be copied from one company code into another.
You can determine which intervals of document number ranges are to be copied from one fiscal year into another.
Define Document Number Ranges
In this IMG activity you create number ranges for documents. For each number range you specify (among other things):
a number interval from which document numbers are selected
the type of number assignment (internal or external)
You assign one or more document types to each number range. The number range becomes effective via the document type specified in document entry and posting.
You can use one number range for several document types. This means you can differentiate documents by document type but combine them again for filing the original documents, provided you store your original documents under the EDP document number.
Note
The type of number assignment is of special importance. For each document type you should check whether a separate number range must be used and which type of number assignment is most appropriate.
One example of a case where external number assignment would be suitable is when you transfer documents into your SAP system from a non-SAP system. The numbers must be unique. The number range is not displayed with external numbers. You must therefore ensure that you do not skip any numbers when entering numbers manually (for organizational reasons).
You should use internal number assignment if the original documents do not have a unique document number. This is the case, for example, with vendor invoices.
Number ranges for documents are company code-dependent. You must therefore create your number ranges for each company code in which the document type is used, namely with the same number range key.
The number intervals must not overlap. If you use year-dependent number ranges, you can specify the same interval with the same key several times for different to- fiscal years (the limit up to which a number range is still valid). If you want to define number ranges which are independent of the to-fiscal year, enter 9999 in the to- fiscal year field.
Caution
For sample documents, use a number range with key X2, for recurring entry documents with key X1. These keys may not be used for other number ranges.
Recommendation
Store your original documents (paper documents) under the EDP number of the SAP System. You should write the EDP document number on the original document. In this way, the original document for a business transaction can be found at any time.
Activities
1. Determine how document filing is to be carried out in your company codes.
2. Define your number ranges accordingly.
3. Make sure that the number ranges are assigned to the corresponding document types.
Copy to Company Code
In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
Intervals which are copied
To fiscal year(s) (validity limit up until which the number range is valid)
Company code from which you copy (source company code)
Company code(s) into which you copy (target company code(s))
Activities
Make all necessary specifications for copying the number ranges.
Note
The number ranges are only copied into a target company code if no number ranges exist there within the selected "To fiscal year" interval.
Notes on transporting
The documentation for the step "Define document number ranges" describes how to transport document number ranges.
Copy to Fiscal Year
In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code. To do this, you have to define the following information:
Company code(s) within which you copy
Number range number(s) which are copied
Fiscal year from which you copy (source fiscal year)
Fiscal year into which you copy (target fiscal year)
Activities
Make all necessary specifications for copying the fiscal years.
Note
The number ranges are only copied per company code into the target fiscal year if no intervals exist there for this fiscal year.
Reg
*assign points if useful

Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise

Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.

check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM

SNRO - Creation of Number range object problem

Hi Experts,
i wanted to create a number range object thru SNRO.
The creation was successful in DEV system.
when i tried to create the same number range object in QA server, i am getting the following error
"Changes to Repository or cross-client Customizing are not permitted - Choose 'Display object' or 'Cancel'."
this is a Znumber range used to generate sequential numbers using FM NUMBER_GET_NEXT
What could be the problem. how to over come this?
Is it the missing authorizations? if so what could be the authorization object (SU53 shows nothing)
Appreciate any help in this regard.
Thanks
Simha

Hi All,
I am confused with the conflicting answers for my problem. But anyways i could transport the number range object and could create a number range interval in QAS.
Thanks a lot for all your valuable inputs.
But i am still not out of this so called misconception - Are number range objects to be transported to QA or to be created afresh in QA/PRD?
Earlier some one told to be created but now i see they can be transported.
I was not ready to edit the options in SCC4 for the client to enable object creation.
Thanks again,
Simha

No authorization for number range object type BTI and activity SHOW

Hi All,
When I try to execute
SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
on the next web window when I select the object type BTI , it comes up with the error
Number range table not maintained for object BTI in customizing
No authorization for number range object type BTI and activity SHOW
I am using AIN 5.1 . Is this an authorization issue ?. If so which all roles I should give to the user? IF you have any idea about this please share some tips.

Hi Sahad,
Only few number range object types are available in the standard system:
Follow the link for help .
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
Follow the for setting up the others.
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm

Error in Number range object - URGENT

I changed one attribute(let say X) of a characteristic(A) from dis to nav and transported to QA. The transport failed saying that the intervals for the number range object for X does not exist.
In DEV RSRV check on X, A shows no errors
any suggestions how can I fix this prob

try attribute change run first if dont work try this
you can increase the number range buffering size... go to se37 use functional module rsd_cube_get and then click on the test/execute(f8) button, then put in your cube name , then for i_obj put in a and then for i_bypass put in x press the execute button. the click on the blue icon next to E_T_DIME. you se your dimensions there. you now need to increase the buffer size for the dimensions that are receiving high volumes of records. so on the same screen not the dimention tht you want to increase the size of, scroll to the right hand side extreme and note down the NOBJECT number starts with BID. then go to transaction SNRO, put in the number you noted down and click on the change icon.
Now in the edit tab on top drop down set up buffering and select main memory.
now under "No. of numbers in buffer type in 500
save and click yes to continue
setting the number range too low will not help in load performance significantly, whereas setting it too high will consume a lot of memory on the application server, which will effect other applications.monitor the memory usage during data loading to find an appropriate number.
hope this helps

Number range object interval - Production Orders

Dear All,
In number range object AUFTRAG, no. of numbers in buffer mentioned as 20,
To my knowledge, because there is buffer defined as 20, system may skip some numbers in production order number range amounting to 20.
But today I have observed that, in the system numbers skipped is not 20 but less than 20, i.e 17.
Can anyone tell me why is this happened?
Regards,
Pavan

hello
pls check as per below
SPRO Production-Shop Floor Control-Operations-Confirmation---
>>>> then you can check in the follwing in the
Define Confirmation Parameters
Confirmation Parameters for Collective Confirmation/Fast Entry
Define Time for Confirmation Processes
Define Paralleling Type for Confirmation Processes
Define Reasons for Variances
Define Field Selection for Confirmation
Define List Layout
Check if required information available in the
rgds
Brijesh

Number range object issueing the numbers randomly

Similar Messages

Maybe you are looking for