Number range objects not maintained properly...??

Am doing a Purchase Requisition for asset material. While saving the PR document am getting error like
I have went to SNRO and checked asset number range object ANLAGENNR , there intervals are maintained. i couldn't go further with the issue, Can anyone help me with the solution please?
Regards,
Naveen

Hi,
Please
1. Go to transaction code J1I9
2. Give object name as BANF.
3. Click on Number Ranges.
4. Click on Intervals
5. Maintain Intervals
6. Save
Hope, your problem has been resolved else revert.
Regards,
Tejas

Similar Messages

  • Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

    Hi Gurus,
    When I try to capture deemed export license from J1ILIC01 I get this error
    The number range is not maintained for Object/Year: J_1ILIC/
    I tried to maintain number ranges in SNRO & SNUM  there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

    Hi
    Just check if you have maintained number range for the correct year as shown in error.
    Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

  • The number range is not maintained for Object/Year: J_1ILIC/

    Hello,
    I am facing the problem as
    After Created the No range object j_1ilic for excise bond, for capturing the CT3 form in J1ILIC01 and maintain the required fields in J1ILIC01, following error is occuring
    "The number range is not maintained for Object/Year: J_1ILIC/"
    Kindly advice on the same
    Thanx in advance
    Shailesh

    Hi,
    You will have maintain the Number range for the Lisence for the object J_1ILIC through SNRO.
    Regards,
    Murali

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • No authorization for number range object type BTI and activity SHOW

    Hi All,
    When I try to execute
    SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
    on the next web window when I select the object type BTI , it comes up with the error
    Number range table not maintained for object BTI in customizing  
      No authorization for number range object type BTI and activity SHOW  
    I am using AIN 5.1 .  Is this an authorization issue ?. If so which all roles I should give to the user?  IF you have any idea about this please share some tips.

    Hi Sahad,
    Only few number range object types are available in the standard system:
    Follow the link for help .
    http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
    Follow the for setting up the others.
    http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm

  • Transporting error!  While transporting Number Range Object

    Hi All,
    Thanks in Advance.
    I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
    Number Range Object Transported successfully for one box. But It is not getting transport into other box.
    Could you please help,  to solve this problem.
    is there any configuration?
    <b><u>Error Log Detail.</u></b>
    ADO import (12) Cancelled
    Log generation messages ....................................... (000-999)
    Log generation messages ....................................... (000-999)
    Ended with return code: ===> 12 <===
    Deleted from buffer ( Ended with errors )
    I don't know, how to resolve this error.
    Thanks Again!
    Regards
    Anand

    Hi,
    Please refer to the SAP note : 132020
    Symptom
    With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
    In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
    ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
    ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
    Additional key words
    Cause and prerequisites
    The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
    Solution
    One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
    Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
    Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
    Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
    If a check shows that the data file is corrupt, transfer the data file again.
    Award points iff it helps.
    Regards,
    GSR.

  • Number Range Object For following object is not maintained for year 2008,

    Hello Together,
    Now the 2008 year has begun.....All the number range object in Excise related process ( CIN ) has to be changed.
    I would like to know whether i need to change the only Year in SNRO or i have add new year in that setting.
    Below is the example :-
    Ranges   Year      From Number       TO Number   Current Number
    01           2007     001000000            99999999     10001013
    If i change only year i,e. insted of 2007 i will change 2008....what will be impact?
    Please guide
    Thanks in advance
    Shailesh

    go to J1I9-select the object--here maintain a new year for the same number range:
    Ranges Year From Number TO Number Current Number
    01 2007 001000000 99999999 10001013
    01 2008 001000000 99999999
    give enter---save.
    regards,
    indranil

  • Interval 01 was not created for number range object HRTEM_REFN

    Dear expert!
    Now, I'm getting some issues in Training and event management module.
    - The first, I created business event
    - Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
    But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
    Help me, please!
    Best regards, Huy!

    Go to the customization as below
    Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
    and maintain number ranges as 01 Internal
    Hope ur problem will solve
    with regards
    partha

  • Funds mngt - Number range 01 not found for object BULI_DOCNR

    Hi all
    need some urgent help to crack an error am getting while creating a budget in funds management.
    the error am getting is
    "Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
    I have maintained the number range in
    Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
    But am still getting the error....
    will really appreciate some help on this
    thanks in advance

    The number range object refers to  "FM budgeting line item number "
    Are you using Former budgeting or BCS ?
    Try t-code- ok11 and ok91 under former budgeting.
    Thanks
    Siva

  • Number range interval not found for object ISH_NLEI in executing NP38

    Dear ALL,
    In executing Transaction NP38 when we save the surgical procedure codes the system
    generates an error message "number range interval not found " . The object referred here
    ISH_NLEI number range has already been defined in spro Define technical number range.
    Please assist what should be done here to resolve the problem.
    Regards
    Ramit

    Hi, check if it maintained in tcode snro for this object

  • Maintain number range object

    Hello Friends,
    When I am doing a Goods Receipt, system is giving the message " Maintain number range object for object J_1IRG23A1, year 2008, excise group 50". What to do for this. Please tell me.
    Regards,
    nr

    Hai
    Thank you very much, it is working , I have saved GR, but now when I go to GR display option, it is saying "document 5..... does not exist in calender year 2008", but if I go to MB03 it is displaying the document, after MB03, if I go to MIGO display, it will display the document. Why it is not displaying for the first time ?
    Thanks
    nr

  • Number Range Object maintained programatically

    Hi,
    I have custom number range object. I need to maintain this by programatically and NOT using transaction code SNRO. (ie create new instance, maintain Maximum number , delete instance etc)
    Anybody having a piece of code or info on this ?
    Your help will be appreciated.
    Thanks
    Sa_R

    hi Sa_R,
    u can try using the "ABAP Debugger",
    this transaction use the program "SAPMSNUM", go to SE80 and Display the Program, it's using the Function to show / edit the range's.
         CALL FUNCTION 'NUMBER_RANGE_UPDATE_INIT'
              EXPORTING
                 OBJECT           = OBJECT
              EXCEPTIONS
                 OBJECT_NOT_FOUND = 1.
         IF SY-SUBRC NE 0.
            MESSAGE A010 WITH OBJECT.
    maybe it can help u.
    Regards
    Allan Cristian

  • NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

    Hi ,
    I am getting a message at production order release i.e.' NUMBER RANGE OBJECT DOES NOT EXIST' in CO01 for one order type whereas i am not getting for other.
    I maintained the order type in SNRO so order is getting created.

    Hi
    Maintain the N Range  in T code SNRO  for No Range Object AUFTRAG and also in t code CO82 assign the no range maintained in SNRO to the corresponding Order type by maintaining in GROUP in CO82
    Plz check and revert
    Regards
    Anupam Sharma

  • Maintain number range object for excise grp

    Hi Gurus,
    During stock transfer, while doing Goods receipt I am getting the below error
    "Maintain number range object for object J_1IRG23D, year 2010, excise group"
    Could anyone please tell me the trans code for maintaining no range for excise group...
    Thanks,
    Raja

    Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
    Regards,
    Nagesh
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

  • Number range object HRTR_PDOC : Interval not found

    Hi,
    I am doing Travel Mgt testing i got two problems
    1. Travel Policy is not taking when entering the expences
    2. when posting the doc to FI the error "Number range object HRTR_PDOC : Interval not found" is coming
    Pls suggest
    thanks in advance
    chandu

    Hi,
    Check table NRIV
    Regards,
    Manoj.

Maybe you are looking for

  • Goods issue directly without Goods Receipt(MIGO).

    Please let me know the standard process of issue directly to user in emergency, without preparation of MIGO, but the transactions can be done postfscto.

  • Need help about refurbished MacBook Pro 15" 2012 vs 2013

    Hello All, I'm planning to buy a refurbished MacBook Pro since I'm tight with budget. This would be my first mac machine ever. So I was hoping if someone can shed some opinion on which one should I go for. But first, I will be using the MacBook for b

  • Component resizing problem in Vbox

    Hi.. I am facing a peculiar problem.. I have a vbox which contains 5 components, each of which has a line graph and a legend.. But all of them need not be visible at a time.. It depends on the number of parameters returned from a webservice call... s

  • Problem exporting HUGE ship drawings to any graphics format.

    I work at a law firm which deals with very large drawings (some of which are 4 feet wide, by about 16 to 20 feet long).  Sometimes we receive PDF's of these drawings, but their sheer size makes them unmanageable to print.  One option is to export the

  • Need help with Workflow Issue: One notification sending out non-stop email.

    Hi, We've created a custom PO Approval Workflow based on standard PO Approval Workflow and we've had this for a while now. Last week, we encountered an issue where the notification keeps on sending email to the Suppliers and Buyers. We found out that