Number range problem for change request in CHARM
Hi guys,
Currently i am working on CHARM implementation and i have a doubt when i create a customised change request(ZDCR) a number is getting generated (e.g 8000000791) before saving the document.but when i come out of the CR without saving and try to create a new CR it is taking the next number. i.e 8000000792
Now i dont want the number to be skipped to the next number if it is not saved, kindly give your valuable inputs.
Regards
Raju
Dear Fr,
In SPRO
Select the transaction type which you have created now
go to change mode
search for the box WITH TITLE TRANSACTION NUMBERING
now deselect early no assignment.
whenver you press the save button only then
you wil have a new no generated.
PLEASE REWARD POINTS
Similar Messages
-
Number range missing for characteristic 0AF_SEAN after importing request
Hii friends,
I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
Then error which i m getting is ,
Number range interval for characteristic 0AF_SEAN is missing
Error when activating InfoObject 0MATERIAL
Characteristic 0MATERIAL: Error when generating master data routines
Error when resetting InfoObject 0MATERIAL to the active version
I am waiting for ur positive reply.
Thanks & Regds,
Kavan Shahhi Kavan,
try
transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
Error calling number range object 0MATERIAL for dimension D4 ( )
or check oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Transporting DataSources
hope this helps. -
Facing problem in Number Range Allocation for Objects in OM
Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
TharakHi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu. -
Dear All,
Previously Document number range(FBN1) for Invoice was External, then i have changed to Internal number, now the problem is that in Counter it shows 1800000126 but system is showing document number 1800000136. Pls help on this & when i am changing from Internal to External system is showing error as "Lower limit can only be changed during Initial Entry".
Pls pls help on this.Dear ranjith,
If you want to change number ranges from external to internal no ranges,
from T-code FBN1 you can for the changes first go to ,<change status button> and make you counter no as 0 and save the intervals,
and come to change intervals button and change the no ranges according to ur requirement.
Assign points.
SU -
Billing Number Range problem ( accounting document not generated)
Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y suggest as U R G E N T.
Regards,
Danny.Dear,
Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
Regards,
Sandip Shaktavat -
Mass deletion of document number ranges intervals for several company codes
Dear experts,
We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
Thanks in advance for your help.
Best Regards,
StevenHi
I am also not aware of such T.code to delete number ranges for a company code.
Alternatively, you can go to FBN1 in change intervals mode.
From the Menu Select all and Press Shift + F2 (Delete interval).
Ofcourse, this have to be done individually for each co. code.
Regards -
Setup new excise inv.number range bec.of change in excise yr this April
Hello,
May I ask for your advice about number range management for excise invoices in India? They are now starting the new excise year this April, and goes with it should be a change (new) in the number range maintained for excise invoices. Should it be done in transaction J1I9? If yes, would you know how to do it? Thanks in advance for your help.
Regards,
PeterHello,
Thank you very much for your reply. What if currently we have the ff:
No Year From number To Number
01 2008 xxxxxx xxxxxx
Is the ff set up correct?
No Year From number To Number
01 (same?) 2009 yyyyyy yyyyyy
Thanks for validating.
Regards,
Peter -
Hi,
i have a problem when a try to send long texts to a smartform. when i fill in the long texts in change request, the program won't make a notification, only a log. i would like to have the long texts in the smartform. could anybody help me with that? or is there a standard smartform for change request?
regards HenkK usually denotes it is a definition (header). Generally when the transports are released it creates files at the server level. For each request there could be 2 or more files created. K9xxxxx.D11 is the header file, R9xxxxx is the data file, sometimes D9xxxxx is also created for data.
Hope it helps.
-Cheers -
Digital signauture for Change Request Mgmt
hi all;
I am trying to incorporate the 'Digital Signature' function in ChaRM. The setup for digital signature or documention was simple. I am trying to incorporate the same for Change Mgmt. I did some basic configuration for Charm in ECR ( hoping it leads to the same)
1. Defined the authorization group
2. defined the signature strategy
3. defined the singnature network
where i am stuck is defining the sigunature network for objectss.Not sure of the right objbect value for change request object.
Any help/documentation/ideas/suggestions are appreciated.
Thanks
ajayHi
Can you give some details about "what you found"
it will be helpful to form......
thanks -
I have number range issue for fi posting.
hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client....... 750
User..... ECCIABAP
Transaction.. FB01
Update key... C83B07DE4DADF13CB4950017A4AB8015
Generated.... 02.03.2009, 20:37:23
Completed.... 02.03.2009, 20:37:23
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC -
Number range object for CS order
Hi,
I have created CS order type and am trying to assign to the corresponding notification type, the system throws error as " number range object AUFTRAG does not exist. But i checked in SNRO the same object is available. What and where i need to do in the spro for making this assignment.
regards,
Ram.Check with following Tcode and check under respective groups, by clicking on Group button.
IW20 - Number range for Message
OION - Order Number Range
If you still not found the correct number range, then you are requested to look in to Plant Maintenance and Customer Service in SPRO.
Hope this can assist you
Thanks & Regards
JP -
ODS Activation Failure due to Number range object for characteristic ZTXLEV
Hi
I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
can anyone help me
thanks
KINDLY SEND MAIL TO [email protected]
srinivasHI,
check this
Error calling number range object 0MATERIAL for dimension D4 ( ) -
Maintain number range interval "" for inventory document --help!
Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport. -
Number range interval for characteristic 0CSTELMNTYP is missing
All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
DaveHi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar -
Number range 01 for object BANF is nearly exhausted.
Hi ! When we do total planning run in the background we got the message "Number range 01 for object BANF is nearly exhausted.". Our system is configured to create a new purchase requisition for every requirement. I can found that we have reached 98% of our PR number range and the warning message (through SNRO) is set at 2%. As a temporary solution, before I assisgn a new number range to PR, I reduced the percantage for warning message to 1% so that we can get few more days before the number range is changed. But, we continue to get the same error and no purchase requisition is created. Kindly help and suggest.
regards,
Satyathis is probably caused by the buffering. Buffering of numbers is made to increase performance. the Program reads the number range just once to get 10 numbers (and the percentage for the warning message as well, otherwise it would not make sense to use buffers if SAP has to access the number range anytime to check if it is nearly exhausted )
Maybe you are looking for
-
Hi.... good evening.. today iam going to explain about this object. this is a new object which was assigned for me before two days. created a report that displays open purchase order for a given plant or delivery period what is the selection screen f
-
... for the past few months i have noticed that emails in my inbox Yahoo mail account older than a few weeks keep disappearing. i cannot find them in my Yahoo account or iPhone app BUT i can see them on my Mac Mail version of email. Emails that i hav
-
Hard drive backup - then network backup
I created a full backup of my macbookpro to a connected firewire drive (150g). I then hooked this same hard drive up to another leopard computer (imac). The macbookpro sees the drive and is willing to back-up to it.... but it wants another 150g; as i
-
How do you treat each item created by an itemRenderer as an individual item?
I have a list that is populated by an itemRenderer. The itemRenderer creates a horizontal list of icons. I want to treat each icon generated by the itemRenderer separately so that I can make changes according to the icon that is selected. How do I do
-
Bridge thumbnails, PSCS3
I just converted 2 NEF files to compressed DNG with raw embedded. At first, the thumbnails never came up, only DNG icons with the correct filename. I purged the folder cache and was able to see a thumbnail for one of the files. Regardless of what I d