Number range R4 for object BANF nearly exhausted

Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM

>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM

Similar Messages

  • Number range 01 for object BANF is nearly exhausted.

    Hi ! When we do total planning run in the background we got the message "Number range 01 for object BANF is nearly exhausted.". Our system is configured to create a new purchase requisition for every requirement. I can found that we have reached 98% of our PR number range and the warning message (through SNRO) is set at 2%. As a temporary solution, before I assisgn a new number range to PR, I reduced the percantage for warning message to 1% so that we can get few more days before the number range is changed. But, we continue to get the same error and no purchase requisition is created. Kindly help and suggest.
    regards,
    Satya

    this is probably caused by the buffering. Buffering of numbers is made to increase performance. the Program reads the number range just once to get 10 numbers (and the percentage for the warning message as well, otherwise it would not make sense to use buffers if SAP has to access the number range anytime to check if it is nearly exhausted )

  • Facing problem in Number Range Allocation for Objects in OM

    Hello Friends,
    I have couple of questions in setting number range for Objects OM :
    1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
    2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
    3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external  num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
    4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
    Regards
    Tharak

    Hi,
    For 1). Yes you can set number ranges for all plan versions.
    2. You can devide like this.
    IN - 00000001 to 49999999 
    EX - 50000000 to 99999999  - EXT.
    3. In my view it is applicable to all Objects.
    4. Don't know.
    Reward me if helps.
    Thanks,
    vasu.

  • Number range  for object BANF does not exist

    Hi Guru's
    I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below  despite changing the numbering range on the affectred documents. Please help.
    Number range  for object BANF does not exist
    Message no. 61501
    Diagnosis
    The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
    Below is a list of MRP elements that are affected:
    Number range object MRP element
    PLAF planned order (operative oder simulative)
    EBAN purchase requisition
    RESB dependent requirements
    MDSM simulative dependent reqmts (long-term planning)
    MDTB MRP list

    Hello,
    You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
    E.g for NB doc type number range number is 20
    and in OMH7 number range number 20  has interval from- 2000000000 to 2099999999
    same way
    for RV doc type number range number is 21
    and in OMH7 number range number 21  has interval from- 2100000000 to 2199999999
    Regards,
    Shailesh

  • PO create error u2018Number range ZB for object not definedu2019

    Dear all
             I have a error in ME21N to create PO,When I click save button,then occurs a error u2018Number range ZB for object not definedu2019.
    I define a PO types:u2019Z506u2019 and assigned to the Number Range u20185Hu2019.The u20185Hu2019 is from 5070000001 to 5079999999 not ext.
    The u2018ZBu2019 number range is defined PR,not PO.So I donu2019t know where does define wrong?
    Please help me!
    Thanks
    Sun

    Hi
    Please check if you have Defined the Number ranges for Document type ZNB  in
    SPRO-> Materials Management-> Purchasing-> Purchase Requisition-> Define Number Ranges
    The reason the error is Coming like that is, in the Customizing of PO Doucment types in
    SPRO-> Materials Management-> Purchasing-> Purchase Order-> Define Document Types-> Link purchase requisition - document type
    here you have maintained the Link for the PR & The PO.
    Thanks & Regards
    Kishore

  • J1i5 gives number assignment error for object  j_1irg1

    Hi Friends,
    while executng j1i5 for update of RG1 register , system gives error "Number  not assigned for object j_1irg1" whearas it is already maintained for the specified excise group(30 in my case & doc year 2008) via snro. Friends, Pl let me know where else I need to do any settings required for this.
    Thanks & Best Regards,
    Atul K

    Dear Atul,
    Check with:
    T. Code: SNUM
    Object: J_1IRG1
    Excise Group: 30
    Maintain the Number Range for the Financial Year.
    Best Regards,
    Amit
    Note: Alternatively, check the same with:
    T. Code: J1I9

  • External Number Range setting for Equipment Not working

    As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
    but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
    Equipment category does not allow alphanumeric equipment number
    Can some one help whether anyother settings are needed.
    (It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
    Regards
    Jogeswara Rao

    Hi Jogeswara Rao,
    Check you other post for reply
    Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

  • Getting number range interval for document type

    Hi All,
    My requirement is to display number range interval for any docnument type in SD.
    I will elaborate my req. clearly.
    We can see document type of SD in TVAK table. If we give document type for ex. ZOR the we will see number range internal assignment (NUMKI). The complete number range we can search through transaction VN01 through NUMKI value. But I didnt get any table to relate NUMKI or Sales document type and internal number range.
    Please help me in searching database table to relate Document type or NUMKI and internal number range.
    Regards,
    Suresh.

    Relation is as below:
    TVAK --> AUART = "Sales Document Type"
    NRIV --> OBJECT = "RV_BELEG" and
             NRRANGENR = TVAK-NUMKI
    Alternatively you can use FM: NUMBER_GET_INFO with the Number Range Number and Object to extract Intervals.
    Regards
    Eswar

  • Number range interval for characteristic 0CSTELMNTYP is missing

    All,
       I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP.  The transport moved fine to my Q environment, but not to prod,  The error was as above and
    Number range interval for characteristic 0CSTELMNTYP is missing
    Message no. BRAIN049
    Diagnosis
    The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
    Procedure
    Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
    I don't understand this - what do I need to do?
    Thanks.
    Dave

    Hi Kedar,
    I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
    For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
    When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
    Thanks for you help in Advance.
    Sudhakar

  • Number range missing for characteristic 0AF_SEAN after importing request

    Hii friends,
    I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
    Then error which i m getting is ,
    Number range interval for characteristic 0AF_SEAN is missing
    Error when activating InfoObject 0MATERIAL
    Characteristic 0MATERIAL: Error when generating master data routines
    Error when resetting InfoObject 0MATERIAL to the active version
    I am waiting for ur positive reply.
    Thanks & Regds,
    Kavan Shah

    hi Kavan,
    try
    transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
    Error calling number range object 0MATERIAL for dimension D4 ( )
    or check oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07
    Transporting DataSources
    hope this helps.

  • Mass deletion of document number ranges intervals for several company codes

    Dear experts,
    We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
    Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
    Thanks in advance for your help.
    Best Regards,
    Steven

    Hi
    I am also not aware of such T.code to delete number ranges for a company code.
    Alternatively, you can go to FBN1 in change intervals mode.
    From the Menu Select all and Press Shift + F2 (Delete interval).
    Ofcourse, this have to be done individually for each co. code.
    Regards

  • Re : Maintain number range interval "" for quants

    Hi
        While doing the transfer order i am getting the following error.
    " Maintain number range interval "" for quants "
    How to solve this.
    Thanks
    Anto

    dear sir
    go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
    Regards
    jrp

  • Number range buffering for dimension tables (DIM IDs) and InfoObjects (SIDs

    Hi BW Experts,
    How to check whether this number range buffering for dimension tables (DIM IDs) and InfoObjects (SIDs) is Active or not ??
    can you please provide me this technical information where to go and check in the system ?
    Thanks in Advance.

    The Early Watch report lists these because of the large number of rows in the MD/Dim tables.  Keep in mind though, that Number Range buffering will really only help if you continue to generate a large volume of new SIDs or Dim IDs with ongoing loads, e.g.
    If your transactions being loaded to a cube result in several thousand new rows being added a Dim table, then it makes sense to turn on Number Range buffering for that Dim ID.  But if the transaction volume is only cause a few hundred DIM IDs to be added, buffering will not really get you anything.

  • PO Number range diffrent for diffrent comp code(backend system is same)

    Hi Experts,
    I have a requirement that
    Define PO number range (Diffrent) for diffrent company code
    In our SRM system we have three company codes and currently we have only one "number range"
    now our requirement is to define diffrent no range for individual comp code
    I can difine diffrent no range, but when i am going to define those no range in "Number Range Number for Purchase Orders in Backend System"
    System is not allowing
    Any idea
    Thx
    Jai

    Thanks Padhi:)
    Great Job...I have tested it in development and is working fine..but not sure how effectvely it will work in production system
    as many people talking about some Badi and coding.etc even sap also saying that
    "Unfortunately, I cannot give you a more positive answer about ECS"
    Any comments will be appreciated
    Rgds,
    Jai

  • I have number range issue for fi posting.

    hi gurus,
    i have number range issue for fi posting (fb01,fb50).
    problem in updating table glpca due to duplication of record.
    INSERT GLPCA FROM TABLE T_GLPCA .
    With Regards,
    Shakthi Raj N.

    error msg  after generating document no and it is not getting updated in data base
    error msg
    "Express document "Update was terminated" received from author "ecciabap""
    Client.......   750
    User.....   ECCIABAP
    Transaction..   FB01
    Update key...   C83B07DE4DADF13CB4950017A4AB8015
    Generated....   02.03.2009, 20:37:23
    Completed....   02.03.2009, 20:37:23
    Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

Maybe you are looking for