Number Range (SNRO)

Dear All
I want to create Number rage object in SNRO
can u anybody writedown there steps A to Z
i want creatr range like 'H001', 'H002', 'H003'.....

HI,
Check this link.
http://help.sap.com/saphelp_46c/helpdata/EN/2a/fa0331493111d182b70000e829fbfe/content.htm
Suggest you to Search in SDN with key - <b>SNRO</b>
Will get few more useful related Posts.
Reward points if this Helps.
Manish

Similar Messages

How to use SNRO to create daily number range?

Dear all,
I would like to know how to use SNRO to create a daily number range.
We would like to have the following sequence. The first 8 digits are date and the last 2 digits are number sequence. Each day, the last 2 digits will start from 01 again. i.e. <8-digits date><2-digit sequence>
For example, today is 22 May 2006,
2006052201
2006052202
2006052203
Tomorrow will have sequence like this:
2006052301
2006052302
2006052303
Thanks!

Thomas,
I don't there is a automated way of doing as the dates do NOT follow a numbering sequence. What you can do is to create a number range for getting the last two digits every day and manually concatenate the date with the serial number.
However, as you have to reset the counter every day that might be a issue.
Regards,
Ravi

SNRO - Creation of Number range object problem

Hi Experts,
i wanted to create a number range object thru SNRO.
The creation was successful in DEV system.
when i tried to create the same number range object in QA server, i am getting the following error
"Changes to Repository or cross-client Customizing are not permitted - Choose 'Display object' or 'Cancel'."
this is a Znumber range used to generate sequential numbers using FM NUMBER_GET_NEXT
What could be the problem. how to over come this?
Is it the missing authorizations? if so what could be the authorization object (SU53 shows nothing)
Appreciate any help in this regard.
Thanks
Simha

Hi All,
I am confused with the conflicting answers for my problem. But anyways i could transport the number range object and could create a number range interval in QAS.
Thanks a lot for all your valuable inputs.
But i am still not out of this so called misconception - Are number range objects to be transported to QA or to be created afresh in QA/PRD?
Earlier some one told to be created but now i see they can be transported.
I was not ready to edit the options in SCC4 for the client to enable object creation.
Thanks again,
Simha

Number range not created in SNRO for new created Z-Infoobject

hello all,
I created a Z Infoobject of a SAP delivered infoobject, basically I went to RSD1 used template 0COSTCENTER and creater a Z object of same to add few more objects as attr and test something.
Now I am trying to run the FM "RSD_IOBJ_GET" to get the number range, which I am able to do succesfully by using the ZINFOOBJECt name and object version "A" and I_BYPASs_BUFFER = "X". i get the number range, go to tcode SNRO and input BIM and the number range i got from previous FM but it says the number range does not exist?
My question is when is the number range created? I am trying to improve load time by doing the number range buffering.
Please let me know, thanks in advance for replies.
Thanks

Hi ,
When you use this FM "RSD_IOBJ_GET" , the number range object will be in table "E_S_VIOBJ". Double click on this and look at the number in column "NUMBRANR". Add the "BIM" in front of that number to get the required number range. Then go to tcode SNRO. In the field -"OBJECT", provide this number range object (for eg . BIM0076070). Then click on display or maintain. This will give you the Number range object for the master data infoobject and also the details if it is bufferred or not. You can follow up accordingly then.
Hope you followed the same process to get the number range object.
Also, have a look on the below link to get details :
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a6e3ff-f000-2d10-b59d-8ef35e248f83?quicklink=index&overridelayout=true"
Regards,
Sarika

Number Range Buffering - SNRO

Hi Gurus,
             Can any one Plzz tell me why do v go for Number Range Buffering?
It's use?? And the procedure to do it? I searched it in forum but didn't got what I needed.
Cheers,
Sultan.

hi,
Tip on Number Range Buffering :
When you load large quantities of data in an InfoCube, the number range buffer should be increased for the dimensions that are likely to have a high number of data sets.
To do this, proceed as follows. Use function module RSD_CUBE_GET to find the object name of the dimension that is likely to have a high number of data sets.
Function module settings:
I_INFOCUBE = 'Infocube name'
I_OBJVERS = 'A'
I_BYPASS_BUFFER = 'X'
The numbers for the dimensions are then contained in table 'E_T_DIME', column 'NUMBRANR'. If you enter 'BID' before this number, you get the relevant number range (for example BID0000053).
You can use Transaction SNRO (-> ABAP/4 Workbench -> Development --> Other tools --> Number ranges) to display all number ranges for the dimensions used in BW if you enter BID*. You can use the object name that was determined beforehand to find the required number range.
By double-clicking this line, you get to the number range maintenance. Choose Edit -> Set-up buffering -> Main memory, to define the 'No. of numbers in buffer'.
Set this value to 500, for example. The size depends on the expected data quantity in the initial and in future (delta) uploads.
!! Never buffer the number range for the package dimension !!
Also heres the content of the note : 857998
The number range buffering for DIMid's and SID's
a) the DIM table increases by a large number of data records for each request
b) the size of the DIM table levels out but at the beginning you expected or observed a significant increase
c) there are many accesses to the NRIV table with reference to the number range object of the dimension table
d) the InfoCube or the dimension table is deleted regularly and, therefore, the DIM table increases significantly in each period.
The number range object for the SIDs of an InfoObject should be buffered if
e) you regularly add many new data records to the SID table
f) you know before the initial load that there is a lot of master data to be loaded for this InfoObject
g) you delete the master data periodically and you always load many new records (this should be an exception).
How do you find number range objects of the dimensions and SIDs whose number range should be buffered?
h) You know in advance that the dimension table or the SID table will increase significantly per request.
i) You observe accesses to the NRIV table and you can determine the number range object directly in the current SQL statement.
j) A high number range level may indicate that there is a significant increase for these two BW objects (valid only for BID* and BIM* objects)
                       SE16 'NRIV'
-> OBJECT = 'BID' or OBJECT = 'BIM'
                       displays all number range objects with number level (NRLEVEL).
                       Export this output to an Excel document and sort NRLEVEL in descending order. Most candidates usually have a high number range level.
                       You can determine the corresponding dimension tables by using the table RSDDIMELOC. You can find the InfoObject for SIDs using the table RSDCHABASLOC (the field NUMBRANR contains the last seven digits of the number range object). The procedure is even more effective if you read the table NRIV periodically and you determine the changes using NRLEVEL.
k) Another indicator is if a dimension table or an SID table significantly increases on a regular basis.
                       How many instances should be buffered?
In the past, a value between 100 and 500 has proved to be efficient. If there is still a high load for these number range objects on the table NRIV, you can increase the value.
Caution:
- Never buffer the number range object of the package dimension table of a data target.
- In addition, never buffer the number range object of the request ID (RSDCHABASLOC-CHABASNM = 0REQUID), generally BIM9999998.
- Ensure that not all dialog processes are occupied permanently
hope this helps
Regards

Number ranges in SNRO

Hi!
I've created a number range with SNRO. How ever I don't know, how to handle this?
I've found an fm, called NUMBER_GET_NEXT.
Is it only reading the next number?
Or is it set it to the next automatically and I have to use only this one fm?
I have a question with buffering also: because I planned to use this number range at some important document types I don't want any gaps in the numbering.
Unfortunately the check box, for the buffering cannot be changed, because it is disabled, and checked by default. What will happen if I enter 0 to the buffered numbers?
Thank you
Tamá

Hi Tamas,
so far everything sounds very good, NUMBER_GET_NEXT ist the correct FM,
you created your number range within SNRO.
But you have to watch that you switch off buffering at the number range object.
Go to the menue EDIT -> SET UP BUFFERING -> NO BUFFERING.
Now the number range object will not buffer numbers and you'll not have any gaps
in your numbers.
Kind Regards
Henner
<b>Award if helpful</b>

SNRO Change Profile Number range

HI,
We need to change the default number range of profiles (automatic assignment in Profile generator) as due to a mishap i the past any new number already exists in our production system. System BW3.0b on 4.6 basis . We already assigned new numbers in trx SNRO, but this has no effect, do we need to restart sytem for this change to take effect or is there any other thing we could have missed, does anyone have a document how to do this?

Soma
we went to SNRO selected object Prof_varis than to button change , clicked away "Dailog box make urgent repairs etc" then to button number ranges.Then cerated number ranges :
No from number        to number        curent number
1   300000               500000               300001
2   600000               700000               600001
3   000001                299999               299999
Lats two only created after the first failures.
Then save. Fist time the sytem asked for a transport. Next times we got dialog box about no automatic transport and clicked that away.
if we now go to the profile generator and creat new role in authorisation tab we click on create profile the automatic generated number = T-DD210229 and we want thsi to be abv bove 300000.
Why is this not working??
Any help is much appreciated.

Resetting number ranges through SNRO

Client Copy: Each time a client copy is made, material movement postings cannot be processed until several number ranges are reset and the user gets the message Express document update was terminated. These number ranges can be reset thru SNRO. But identifying what objects need to be reset also difficult. I dont know how to identify what objects need to be reset the number ranges for the problem. This problem occurs each time a client copy is made (The user faces). Does anyone know what each object in that table? Where can I find the descriptions of each object? How do I know what objects need to be reset?
Thanks,
Sobhan

> The number ranges are also replaced. My basis admin
> told me that table NRIV is copied. He says if there
> is a update during the backup (in the production),
> these updates won't be in the backup. He copies this
> backup into test system. I am not even clear on this
> point.
>
> Thanks,
> Sobhan.
Here is the explanation. You take a backup of your production system at a point of time X. At this time, NRIV table has a value of 12345 for document X. Now you refresh your test system with this backup. So your NRIV table in test system will show that the next number available for document X is 12345. Now you create a new document X in test system. It should get the number 12345 allocated to it.
I don't see why it is dumping in your case, unless they are applying different backups to test system in phases like taking a backup of say number ranges at one time and applying that first to test system. In that case, your test system will have the next number at 12345. Meanwhile documents are being created in production and the next available one in production may be 12349. Now basis takes a backup of the documents without the taking the new NRIV backup and apply that to test system. Now in your test system you have documents 12345, 12346, 12347, 12348 while the number range says the next available number is 12345. That is where the dump happens.
Check with your basis if they are doing it this way. If they take one backup for all and apply it, then there should be any problem.

SAP HR - RP_PLAN alphanumeriacal number range in SNRO

Hi guys!!
I have an issue regarding number range in Organizational Management for SAP HR.
We have internal and external intervals and that's ok however, it's required to maintain external alphanumerical number range for positions, jobs and organizational unit.
I saw in the RP_PLAN details that element is SUBGR - NUM8.
Could I change this one to something like CHAR10?
Let me know about solutions and risks assigned to this issue, please,
best regards,
Sandra

Hi Sandra,
No you cannot change the domain to CHAR10 for technical reasons. So you will have to use 8 digit number for PD objects.
Kind Regards
Christine

SNRO: Number Range Intervals

Is it possible to use this functionality, I suppose with FM GET_NET_NUMBERS, with a number range that would have a character in its second position?
Thanks.

No.
The function module uses the table DFPM_NUMB's CURRENT_NUMBER field (Data type N) to add a number. So You cannot have a number generated with characters and numerals.
You will have to manually generate the number and concatenate a character to it.
Regards,
Subramanian

Excise invoice and domestic invoice sharing same number range

Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakraborty

Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty

Excise invoice number ranges

Hi
I want to define number ranges for particular sales document type. Am aware we can do it through Tcode SNRO. But pls guide me step wise what field to selct from drop down .
/BEV1/EMLG     Empties Update Sequence Number
/BEV3/CHAB     Number Range for Settlement Runs
/BEV3/CHBK     Number Range for Purchase Control Results
/BEV3/CHBU     Number Range for Posting Document
/BEV3/CHEG     Number Range for Supplementary Documents
/BEV3/CHEV     Sequence Number of BTEs Used in Contract Handling
/BEV3/CHLE     Sequence Number of Amount when Entering External Amount
/BEV3/CHOB     Number Range for Objects in the Beverage Industry
/BEV3/CHSO     CH Assortment Number
/BEV3/CHVA     Number Ranges for Contract Statement
/BEV3/CHVD     Contract Handling Document Number
/DSD/FSR     DSD: Run Number of Final Settlement
/DSD/ME_CO     Number Range Cockpit
/DSD/ME_CP     Customizing Cockpit
/DSD/ME_KY     DSD Mobile Key
/DSD/PR_NR     Number Range for MDSD Promotion Numbers
Regards
Suvin

hi,
In SNRO , Give object type RV_BELEG. In that you maintan your number range.
swapnil

Excise invoice number range.

Dear Sirs,
For a new trading business I have assigned a new number range for commercial invoices but I am unable to create a new number range for Excise Invoices.
Please suggest how I can create a new Excise number range for this particular business & how I can interlink it with the commercial invoices.
Looking forward for your kind support.
best regards,
Rajdeep

Hi
As Ratish alraedy mentioned that Excise Invoice No. Range is maintained on the basis of Series Group, so check your series Group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Regards
Amitesh Anand

Wrong Depot Excise Invoice Number Ranges

Hi,
We have created the new number ranges for the year 2010 for Object - J_1IDEPINV(series group S11)
But when the Depot excise invoice is created by using J1IJ with reference to delivery, the number ranges are picked from old series of 2009.
The Delivery is dated 29 March 2010, the excise invoice is created on 2nd April 2010.
The number ranges are maintained on 1st April 2010.
Regards,
Jagadish

Please check Object - J_1IDEPINV in SNUM ,J1I9,SNRO
whether To-year flag is set or not , check must be. and number range interval no is 01
For your info- even in the compnay code setting in LG-- Tax ongoods movment-
here First Month :4April----if these setting are there surelly you will get new number range maintain in 2010
likes points please

Excise number Range Maintenance

How to maintain Excise number Range and in which object we have to maintain number range for domestic /export etc

Hi rohith
Go to SNRO (or) SNUM and select any of the below objects required by you and select NUMBER RANGE on top. It will ask for "Series Group". Give the respective plant's series group and click "Change intervals".
Now give some value in the field "No" followed by year and number range and save.
J_1IARE1         ARE1 Doc No object based on Series Group
J_1IARE3         ARE3 Doc No object based on Series Group
J_1IBOND        Excise Bonding: Bond number object
J_1ICERT         Withholding Tax Certificates (India)
J_1ICHLNNO     Internal number range for challans
J_1ICONPLA     Consolidated PLA serial no. generation
J_1IDEPINV      Excise Invoice Number for Depot Invoices
J_1IEXCEXP     Export excise invoice number range
J_1IEXCINV      Excise invoice number
J_1IEXCLOC     Local excise invoice numebr range
J_1IEXCTST      Excise invoice with intervals
J_1IEXINEX       Excise invoice number for export
J_1IINTNUM      Internally document number to be generated
J_1IINTPR2       Despatch serial number
J_1ILIC             Excise Bonding: License number object
J_1IPLA2          PLA part II number range object
J_1IRG1           RG1 Number range object
J_1IRG1_T        No. Range for RG1 - Excise group / Material
J_1IRG23A1      RG23A part 1 no. range object
J_1IRG23A2      RG23A part II number range object
J_1IRG23C1      RG23C part I number range object
J_1IRG23C2      RG23C part II number range object
J_1IRG23D        Folio Numbers for RG 23D
Thanks
G. Lakshmipathi

Number Range (SNRO)

Similar Messages

Maybe you are looking for