Number Range Transport (BW)

Hi Gurus,
We are transporting the BW objects from the BW Dev box to QA. Due to unavailabilty of few number range objects the transport got failed. We went to SNRO in QA to define the Number Range for RS_OBJNUMG. On again importing the same request, we got the issue resolved.
Is this a recommended way for any BW Transport (both QA and Production)?
Is it a good idea to execute the following programs in the target box (QA or Production)?
RSDG_REPAIR_NUMBER_RANGES
RSDG_OBJNUMG_CREATE_INTERVAL
The number ranges are maintained in NRIV. The number of records in this table is different in Dev Box and QA/Production box. How can we have both Dev box and QA box in sync in terms of number range objects?
This time my questions more or less revolve around- how do we maintain number range in Quality and Production?
I would appreciate all the help.

Hi check this
Program RSDG_OBJNUMG_CREATE_INTERVAL during BW Transport
Jaya

Similar Messages

Number range transport problem in Internal orders

Hi,
I created new internal order type in KOT2_OPA t. code and at the time of saving it is asking number range. so i assigned one number range interval to the order type and saved the application in development server and noted down the request number. i released the request to the Testing and Quality server. in that it is not showing the number range in quality server. What i have to do. Does i have to do any configuration for the moving of number ranges to testing from development. please guide me deeply it is very urgent for me.

Hi,
Number range objects can be saved in workbench requests & transported manually.
Thanks
Kishore

Prefix Number range: Transport number range

Hi All,
Here is the situation. there are 2 dev servers. the prefix number range in both are maintained as 901 . The workflows will be trasported to a single prod servers. Now as i understand this will create some trouble in prod coz two workflows in two system might have the same number.
Now I think maintaining different number range might help. but when transporting to prod how willl this number range will be taken into account. I mean how to make sure that 901 will be transported as 901 and same as 902 range? Do i need to maintain some config in prod system or just reserving both the number ranges 901 and 902 in prod will solve the issue? Just need some confirmation ..
Thanks in Adv !
Anuj Sethi

Exactly. The numeric ID that is assigned to your workflow template follows it through the transport system in the same way that the include for a function module follows it.
The difference between workflow templates and reports (in this matter) is that you are not allowed to define the program name of the workflow template. Instead it is composed from the prefix and the next available number in that prefix range.

Number range transport request

Hi,
pls tell me are number range intervals not transported using transport request, if yes then how are number ranges appear in prod. server.
thanks
Kavita

Hi All,
thanks for the inputs, but wish to understand the scenario completely I am practicing on IDES and i have been told tht we do not transport number range requests....my question is once we maintain number ranges on dev. server and then carry out customistion i.e. creating OM objetcs like position, job etc......which will be alloted numbers.....now when we move to prd server....then will these objetcs have the same numbers.....or first we maintain number range in prd server then import the customised OM objects
sorry to bother ....but need to understand
thanks Kavita

Number ranges transport -urgent

Hi
When we use copy company code function,as i noticed the number ranges of the
source company code will be will be copied for the target company code.
When i see the number ranges after transporting to QAS all number range status are set to zero for the target company code .when i checked the request it contains NIRV Table entries for the target company code.
Now my question is ,copy company code request contains entries in so many tables including NRIV,If i tranport this request my worry is does it overwrite the
all the PRD number ranges data or just it will updates only the Target company code data.
Thanks
Lily

Hi,
When you copy a company it copied the number ranges to the target company and put this in the transport for the new company code (not the old one).
In the situation I used this it was no problem.
Have a look in your transport and there you can see the key field with the company code for the transport.
When you are not hapy for 100% make screen prints from the numberranges in PRD before you tranport it. When it's go wrong you change it manual back.
(Do only transports dor new companies not existing companies)
Paul

Number Ranges- Transport

Hai Gurus,
Can we transport number ranges from one envt to other envt.
can any one please clarify the doubt;
If it can be transported what are the preventive measures to taken care.
Thanks in Advance
take care
sameer

Dear sameer basha
No number ranges cannot be transported from one client to another client. It should be created and assigned in the same client. For example, if you want to maintain some number ranges for sales documents, you should create in production client itself using TCode VN01.
thanks
G. Lakshmipathi

Vendor Master Number Ranges....Transportable?

Hi All,
Are Number Ranges transportable? For example if I create a new account group for the Vendor and Number rage in developement and maintain the interval for the number rage....would all of this be transported to production? Or do I have maintain the interval in the production?
Can anyone clarify?
T

Hi,
yes, we can transport all the number ranges. U try XKN1 , first u create a Request by selecting "Interval---->Transport". Now u created a request having all number ranges. Now we can import all the numer ranges by using this request.
I hope u may get some idea...

Transporting error! While transporting Number Range Object

Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
Error Log Detail.
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
Anand

Hi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR.

Transport of Number range and release proceure and split valuation

Dear Gurus,
Can we transport number ranges from PRD server to Quality Server?
Also, how will we trasport split valuation and release procedure?
Kindly suggest..

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics & values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Transport number ranges to production server of withholding tax

Hi
I have created the number ranges in the development server and saved in one request, but the number ranges are not working in Production system. How can i again transport the same request in production system.
I tried to transport it again but it is showing in grey mode.
Thanks

Number ranges are suggested to be maintained directly in the production client.
Even if you want to transport, Go to SE01 and check that your trans then port include the number range you want to transport.
Regards,
SDNer

How to transport number range group Configuration in Material Master

Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
Vivek

Hi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore

To change the Transport Request Number Range.

Hi Experts,
My customer needs a typical solution.
He wants SAP to create the Future Transport Requests starting from 10000. ( Ten thousand)
now the sequential order is 321
that is <SID><K9>00321. From now on the new transport request should start from 10000
i.e.
<SID><K9>100000
<SID><K9>100001
<SID><K9>100002
etc.
Is it possible. ?
Thanks for your help.
Best Regards,
Raghunahth L

Hi
Check the report RSWBO301 and check its documentation..
Press "I" button in the selection screen to get the documentation..
I believe this might solve your problem...
Program documentation
Short text
Number Assignment for Requests: Find Free Interval
Description
This report program searches for a free interval for numbering requests.
 If the search is successful, you can save the interval. The request
 numbers are then taken from this interval.
Requirement
For customers the number range interval includes the follwing areas:
o 900000-999999 (just numerals)
o 9A0000-9ZZZZZ for ASCII character set or
 9AAAAA-9Z9999 for EBSDIC character set.
You only need to execute this program if you have come to the end of the
 number range interval, but there are still large gaps in the range that
 you want to use up.
Example
 Why you might get into this situation:
 The customer has the R/3 System C11. The last number assigned is
 C11K900115. The customer now imports transport request C11K9ZZZZA
 from an external R/3 System C11 into the customer system C11. The
 next request created in this system will have the number C11K9ZZZZB
 Procedure
Proceed as follows:
1. Execute this program in transaction SE38.
2. Enter the interval limit, for example 5000. You can change this
 limit at any time.
3. Choose Execute.
 If you entered an interval limit of 5000, the report searches for a
 free interval with a size of 5000.
4. If the search was successful, you can save this interval. If not,
 repeat the search with a smaller interval.
Thanks,
Naren
Thanks,
Naren

Transporting Number range Intervals

Dear SRMers
System Information: ECC 6.0,
We created Z Number range objects in ECC system A and transported them to ECC System B.
The custom objects were transported, but the number range intervals did not transport to the target system. My question is do we need to transport the number range intervals for the custom objects seperately?
Points will be rewarded for answers.
Thanks in advance,
Best Regards,
Bob

Hi,
Usually best practice is to not transport number range but to recreate it in the target system.
However, technically it is possible.
Kind regards,
Yann

Transport Number range intervals

Hi,
I have created a custom number range with intervals (from & to number range values) i need to transport this to production and unit testing boxes. how to create a transport for this.
and also it is advisable to transport number ranges?
Thanks
Sa_R

Hi,
Thanks for your reply.
But my doubt is , the number range is newly created. have 250 subjects inside , User already maintained the intervals in the config box. So i need to transport this higher box. If i am transport this , whether all other number ranges get deleted? including SAP standard also?
Thanks
Sa_R

Number ranges got transported

Hi Guys,
We have done some configuration in development where we have crated some new purchase documents, contracts etc. Also we have created some number ranges. The same was transported to quality. Now for testing purpose we have created some contracts, PO's. So the number ranges got used in quality and after testing. Now I have transported the same request to production. To my surprise in production the ranges along with the current number was appearing in SNRO.
Also observed this.
IN PRODUCTION THE NUMBER EXISTING ARE (BEFORE TRANSPORTING)
61 - 4100000000 4199999999 4100000931
AFTER TRANSPORTING THE NUMBER RANGES ARE
61 4100000000 4199999999 4100000252
Now the PO are getting saved from 4100000253 but when I got to ME23N Im getting the old PO that got saved and not the currently created.
How should I resolve this
Regards
Ayyallas

number ranges are not automatically included into a transport request.
you get only a transprot request if you choose from menu Interval > Transport by intention.
Then you get a biiger pop-up with a warning text, and here you have to confirm whether you really want transport number ranges.
Only then the transport request is created and can screw up your number ranges in production .

Number Range Transport (BW)

Similar Messages

Maybe you are looking for