Number Range with interval C00001 u2013 CZZZZZ

Hi all,
I have to create number range with interval C00001 u2013 CZZZZZ.
Suggest me the steps to do the same.
Thanks,
Nidhi Sharma
Moderator message: please try yourself before asking.
locked by: Thomas Zloch on Sep 16, 2010 4:59 PM

check table NRIV and also txn SNRO.

Similar Messages

How to create number ranges with "OK60" transaction or any other.

Hello,
I need to create a new number range to asigne to a document type , using transaction OK60 ( the error says this transaction).
but I only can display with this transaction, and I would like to update.
Is there any other transaction to do this , or is there any way to do this with this transaction OK60?
Thank you very much.
Kind regards
Olga

Hi,
OK60 indeed is used for creating number ranges for FI/CO earmarked funds transactions. You should press on 'Pencil' button and create an interval. If for some reasons, you cannot do this via this transaction, try using SNRO transaction, with IRW_BELEG parameter. If this also fails, then apply to BASIS team to check your authorizations.
Regards,
Eli

External number Range with leading zeros for Handling Units

Hi Experts
    My requirement is to use the External number for the Handling Units provided by vendor.That number starts with 2digits"00"+18 for Example:00123456789123456789
I am Using HU_VEKP Object for no range and maintaining
External No Range From 00000000000900000000 to 00000000000999999999.
But When i am giving Number 00000000000900000001 its only taking
900000001.
Kindly suggest me the right way to take leading zeros.
Rewards for answer sure if it works.
rajesh

Hi Laksmipathi
                      I am maintaining the number range for External number range coz its vendor supplied HU.
           But the prefix zeros has meaning for identifying the Handling unit Functionality.In realtime IF prefix contains Say "0000" it refers to carton
If prefix contains say "0010" it refers to pallet.
           So i need to satisfy there requirement.For example If it is for material number we can maintain In OMSL by check box of leading zeros.
            But i am not able to find any setting for this Handling units.U can check this object HU_VEKP in SNRO tcode where i am maintaining Number range.
Thanks give suggestion
RajeshS

To swap internal number range with an External number range

Hi SAP Guru's,
We have a a landscape with SAP which is divided in 2 ERP's.
One being the Central server and other the Local.
The scenario is that when ever i create a maintenance order in the central server a replication should happen in the local server and the order number should be same as that of central server.
And the scenario should be Vice versa i.e whenever the order is created in a local server it should be replicated in the central.
Both the number ranges used in central and local server are different.
I am not able to find out how we can achieve the above stated scenario.
Please advice what should be my POA.
Regards,
Ankit

Hi ,
1.You have to find the Difference that Wether the order is created using Integration or Manually from the System.
2.The Standard SAP uses Function Module Number_get_next or Badi to fetch the Number and the number is assigned to Order.
Thats how the internal number ranges works .
3.Now your Scenario is to Owerite the Original number given by system by the function module or BADI .
4.Now you find that Plug in Point and Write an Implicit enhancment Point and Owerite the Original value given by System.
So then only you can Owerite the Original Value.
Let me know if you are not clear .
Regards,
Kishor

Different Production order number ranges with same order type

Dear Friends,
I am working on live project implementation.I am having four manufacturing plants.I am having one order type say PPLE, I am having two different versions say CM and CN.Now my requirement is can I maintain two different number ranges for same order types within single plant .
number ranges should be like,
Plant          Version     Number ranges
1210            CM           CM121008...
1210            CN            CN121008
1220            CM           CM121008
1220             CN           CN121008
and so on.here first two digit should be version,then plant and year followed by order number .
Regards,
Manoj Jadhav

Hi manoj,
You cant have two different number ranges for an order type in internal number range, but in external number range you can have two diffrent number ranges
for example for one order you can start with CM1210080001 and other starting from CN1210080001.
Just convince the client to have external number range
Regards,
Srini

PO Number Range With Plant

Hello All,
We need to Assign the Number Range of the PO's based on the Document Type & Plant.
This is as per the Client's Requirement.
I am using ECC 6.0 and looking in the Exit MM06E003. The Include ZXM06U17 does have the Structure EKKO but nothing is given for the Plant. Plant is at the Item Level but this Exit does not has any structure related to EKPO.
Please guide.
Thanks in Advance.
Regards,
Pankaj Agarwal

Purchase Order number ranges you can define and assign as per the document type. But, Number range assignment as per plant is not possible thru standards.
Use the Below Exits.
M06B0003 Number range and document number
M06B0004 Number range and document number
You can search in sdn for more related threads.

Number range object interval - Production Orders

Dear All,
In number range object AUFTRAG, no. of numbers in buffer mentioned as 20,
To my knowledge, because there is buffer defined as 20, system may skip some numbers in production order number range amounting to 20.
But today I have observed that, in the system numbers skipped is not 20 but less than 20, i.e 17.
Can anyone tell me why is this happened?
Regards,
Pavan

hello
pls check as per below
SPRO Production-Shop Floor Control-Operations-Confirmation---
>>>> then you can check in the follwing in the
Define Confirmation Parameters
Confirmation Parameters for Collective Confirmation/Fast Entry
Define Time for Confirmation Processes
Define Paralleling Type for Confirmation Processes
Define Reasons for Variances
Define Field Selection for Confirmation
Define List Layout
Check if required information available in the
rgds
Brijesh

Check a number range with date range.

i have table test which is having column
Start Range
End Range
Start Date
End date
how can i check start range and end range does not exists b/w existing record also with date range of this record.
end date can be blank also.

990690 wrote:
i have table test which is having column
Start Range
End Range
Start Date
End date
how can i check start range and end range does not exists b/w existing record also with date range of this record.
end date can be blank also.Your question makes absolutely no sense whatsoever. We could make guesses, but then we may be wrong in our guesses.
Please provide sufficient details for people to be able to help you. Read the FAQ: {message:id=9360002}

ECC 6.0 :Error with AFAB ( Number Range Assginment)

Dear All,
Please advise
We have upgrading from 4.7 to ECC 6.0
While running DEP AFAB, I get the following Error resulting
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2006 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Here for DEP posting we have maitianed number range as Externally and we are able to run in PRD but now after upgrade in DEV, it is giving the above Error.
regards,
sgs

Hi,
Upto version 4.7, you need to have the number range marked as 'external'.
In ECC 6.0, you need to have the version as 'internal'. You can change the number range from 'external' to 'internal' only when you change the status (current number) to zero. If it is year specific number range, any significant impact may not be there. Nevertheless, please follow the note 890976.
Cheers.
Dhananjai

Replication of account master with 2 diff number ranges to ECC.

HI All,
Wish you happy new Year....
I have a doubt in Master Data replicating from CRM to ECC.
Here is a situation where i have to create 2 number ranges with groupings in CRM for prospects and has to replicate to ECC SD. I heard that only one number range(ie Z1) can only be used to replicate to ECC and ( I.e. Z2) number range masters can not flow to ECC.so can you guys please tell me what are all the problems in replicating the master to ECC if i use 2 number ranges with groupings.
Thanks and Regards,
Arun

Hi Deepak,
Have you downloaded R/3 sales area(ie,. org + distribution Channel+division) to CRM? If you are not using standalone CRM scenario, then you have to maintain R/3 sales area in and then download it into CRM through customizing adapter object dnl_cust_s_area.
Then you have assign R/3 sales org to ur created organization in CRM and define distribution channel and division in the attribute tab of ppoma_crm.
Kindly check have u done all the above mentioned steps?
Thanks & Regards,
Anirban

Customer Master data creation with customized number range

Dear all,
Can somebody know how to create the customized number range for customers like first 2 digits represents Sales organization and next 2 digit should represent circle,next 2 distribution chaneel and last 4 digits shold be the running number.
Looking for solution..
Thanks & Regards,
Murali.

Hi,
In your case you need to define as following
Step No: 01.
01.Sales Orgination with 0001 to 0099.
02.Regions with 00 to 99.
03.Distribustion Channel with 00 to 99
Step No:02.
Define PDP with the diffrent account groups defined for diffrent Sales Org, Regions & DC's.
Step : No: 03.
As per the above configs go to TCode for Number range for accounts groups in XDN1. Say Example as
XX--- From:1010100000 to: 1010109999. Note the possiable numbers are 0000 to 9999 only.
10 is sales Org, 10 is Region & 10 is DC's.
This is one of the way to do. The other way is to develo Z table and to use the user exit / new progarme to identify the requried number range with reference to Sales Org, Regions & DC's
Hope this is fine with your requrment.
Bye & enjoy SAP.
Koganti.

Linking payroll area with number range

Dear Freinds
I am looking for a solution of linking various payroll areas (defined under a single compan code) with the number ranges (more than 1). Please give a solution as to how we can attach one particular number range with a particular payroll area.
Thans in advance
Raghavendra Jyoti

Try to find out if payroll area is an attribute in NUMKR feature

Post depreciation with external number range assignement

HI
When i am running Depreciation run AFAB, i am getting error"created doucment number range with internal assignement.
Currently the number range assigned for documents is external.
Why this error is coming... please provide solution without changing number range to internal..
Thanks and regards
Ramarao.p

HI
see the SAP document .....
Specify Document Type for Posting of Depreciation
In this processing step you determine the document type for each company code for posting depreciation.
Standard settings
SAP supplies document type AF for depreciation posting.
Requirements
You must have defined the document number ranges.
Activities
1. Check the standard document type AF. If needed, define your own document type.
2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
It must be a document type for batch input.
It must be defined with external document number assignment
So please provide the solution ...with out changing internal number range...
Thanks and regards
Ramarao.p

Vendor Number Range Problem

Hi Friends ,
          I have done all settings for Supplier Registration Process. I am able to transfer the supplier from pre selection screen and all the relevant information is coming in supplier screen, when i am clicking on SAVE button, I am getting following error messages.
1. Number not in interval 0000100001 u2013 1999999999
2. Business partner 162 already exists
In supplier screen partner number shows 162 which is in between Internal Number range assignment while at the time of SAVE system comparing with External Number Range assignment why? When I am changing partner number 162 with External Number range Number for example 100009 then only I am able to create Bidder else it is getting error. Should I have to change Number range assignment or Am I missing any steps?.
         I have assigned following entries in Tx. BUCF in SRM.
01      0000000001     0000100000     170
AB     0000100001     1999999999     0       X (Ext)
MD    9000000000      9999999999    0       X (Ext)
Entries defined in SRM Server - Technical Basic Settings - Settings for Supplier Synchronization - Define Global Settings
Vendor Number Assignment Type u2013 Assign SAP-ERP Numbers Only
Abhijeet

Dear Nitesh,
What is the exact error message that you are getting?
Regards,
Naveen.

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Number Range with interval C00001 u2013 CZZZZZ

Similar Messages

Maybe you are looking for