Number ranges are in the Inactive mode.

Hi friends,
I am getting a problem with number ranges. When I am at Number ranges screen the options display only in active mode. change intervals and enter intervals are not in the active mode. How can I set this number ranges to be active and can be used. The same problem I am facing with the document number ranges. Please anybody help me in this regard. Thank you in-advance

Hello,
It would be authorisation issue. please use TCode SU22 and find if you have authorisation for object "S_NUMBER"
Regards
Lavanya

Similar Messages

Why most of the number range are maintain year wise

Hi,
I want to know why most of the number range like Part1 and part2 57F4 Challan goods issue , GR, number range are maintain year wise.
regards,
zafar

Hi ,
There may be a lots of documents in a business . But SAP has provied limited no for documents ( upto 999999999). So if you are running your business for a long time , it may happen that the no. of documents may go beyond this no.Year wise no range allows us to use the same no . in another year . So that the combination of fiscal year and document no is sufficient to uniqly identify one document .
Regards,
Anupam

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

Creation of project, Project ID any number ranges are there?

Creation of project, Project ID any number ranges are there?

Hi Saran,
Project ID have Project Code and Description
you can use Project ID which is a unique identifier for every project as a reference example shown.
here ZCHARM is the Project ID ...you can also use numbers if required.
There is no no. range concept for Projects
Hope this clarifies
Thanks
Prakhar

How to control the number of fields in the Advanced mode in af:query

Hi,
How to control the number of fields in the Advanced mode in <af:query>?
Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
How do i control the list of fields in ADDFields button?
Any ideas?
KR

You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

Applicant Number Ranges are getting skipped

Hi,
In my client's production server while entering initial applicant data the internal number ranges are getting skipped.
For Example someone has done Initial Data Entry for the Applicant, the Applicant number generated is 40. Then in the next entry it is taking 45.
This skipping of Applicant numbers are quite erratic sometimes 5, sometimes 7, sometimes 10 etc.
Samriddhi

Just wondering if you found a solution to this. I am experiencing the same issue.

Purchase order(me21) number range depending upon the plant

Hello All,
I have to generate differant number range for purchase order depending on the plant.
I have found one User exit MM06E003 but it has only ekko as importing structure.
In whiih exit , I cam get plant (ekpo-werks ) and import it to memory id , which will be further used in
MM06E003.
Regards
Mohit

Hi Mohit,
You can try the Enhancement MM06E005. Both EKKO and EKPO structures are available in various function exits in the above Enhancement.
Also you can try using BADI ME_PROCESS_PO_CUST. This BADI is called whenever transactions ME21N/22N/23N are called.
Hope the above info will help.
Regards.
Abhisek Biswas.

Excise Number Range ARE-1 Country Wise

Hi,
I want to configure a the scenario i.e. in ARE-1 there should be number country wise number range. I had checked in the Tcode SNRO there is a object called J_1IARE1 where the number range for the excise group which is dedicated for the outbound deemed excise.
If the invoice is for japan then excise group series should pick it up for japan,if it is bangladesh,it should generate for bangladesh. Is it possible to apply it through abap? If it is kindly provide some guidelines for it.
Waiting for a positive response.
Thanks & Regards,
Yakul Bharwal
Edited by: Rickky.vn on Nov 28, 2010 8:55 AM

i suppose u ca use a user exit for it...
program name RVSAFZZ..or something like this
it has got an exit by name number_exit...
hope u understood and its clear...

Production order number range after taking the back up from production serv

Dear all,
My client did a back up activity yesterday from production server to disaster recovery server.
After completing this activity they shut down there production server to do the testing of this new server.
Production guy converted the planned order to production order and he got a number say 2000064732, but the current number in number range is 2000080139.
But same guy created order one day before in production server that time the order number in 2000080138.
After 2 hours the system (by that time he has create more than 50 orders) started assigning the number as per the current number. Ex: 2000080140,141,142u2026
As per my observation they have maintained buffer as 20. As per buffering logic system has to skip in forward direction not in reverse direction.
But in our case the system skipped in back word that nearly 16000.
So please help me to find out the reason why the system assigned those number and on what basis.
Thanks for your help
Regards
Ramesh

See SAP note 62077, your application server was shut down, the numbers that are left in the buffer (that is, that are not yet assigned) are lost. As a result, there are gaps in the number assignment.

[Solved] Where are all the different modes in gcalctool 6.6.2?

This is what I see. I don't know how to turn on the scientific mode there.
Thank you, guys. You and many other people make me love Arch forums I have to say that gnome 3.6 is very non-intuitive. Who can imagine that the menu for a small window at the corner of the 2nd monitor is on the panel of the 1st monitor?
Last edited by dxxvi (2012-12-01 04:14:01)

If you are currently running gnome 3.6, it sits in the application menu (the one you get when you click on the application icon in your top panel in gnome-shell). Else, it should be where foutrelis has shown you.
Yeah in fact they still have design issues with two-monitor configurations, there should something to prevent single monitor behaviours when you are running a dual-desktop configuration. Perhaps is there an extension for this ?
Here it is :
https://extensions.gnome.org/extension/ … or-panels/
Maybe this can help !
Last edited by omer666 (2012-12-02 16:58:10)

Number range object issueing the numbers randomly

Hi All,
We have created a number range object and used in a program,but it is issuing the values randomly if it is issues 8 yest ,today is issuing 7 .
do any any idea on this issue?
Regards
Channa

Hi,
Please check the number range configuration.
[Number Range Example:|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=50004015]
Shiva

Some external number range are not valid for equipment creation

Hi All,
What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
Waiting for your valuable inputs..
Thanks
Surya

Hi
As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
Regards,
Rakesh

Number Ranges for the Serial Number Profiles

Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.

Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

Internal number ranges for accounting documents are not updating

Dear Experts,
We are existing user of SAP 4.6 C , are facing probelm while posting accounting document , the accounting document number ranges are not getting updated.
When I post first document it got alloted first number from the interval when i post another document the system showing message Document Number XXXXXXX is already assigned to other document.
And we have checked through T.C FBN1 and checked the number ranges where first document didn't showing in the alloted number range status.
Early reply can be highly appreciated.
thanking you.
Regards,
Y.Kiran Babu.

hi Rajesh,
check if any document exists with that number in table BKPF. Also check: the number (current number) you see in FBN1 should be the highest existing document number in BKPF (inside the range).
ec

Number ranges are in the Inactive mode.

Similar Messages

Maybe you are looking for