Number Ranges for Service Order

Hi All,
I want to create no. range for service order.
Generated no. should contain plant code as well.
eg VSC00AA001
here V is hardcoded
   SC00 is plant code &
  AA001 is no. generated from no. range.
Pls. tel me how to proceed...
bye,
Pranjali

This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
Regds
Manohar

Similar Messages

  • Number ranges for purchase order in SUS- why?

    Dear Gurus,
    In SPRO settings, I have seen the option for defining the number range for purchase order in supplier self service system. similarly, there is an option for defining the number range for purchase order response.
    Why do we need to define the number range for purchase order and its response in SUS system? In SUS system, the purchasing documents from SRM and MM system create corresponding Sales Order and its follow-on document. So, we need to define the number range for sales order not purchase order.
    In spro documents, it says you need to define the number range only if you create purchase order locally in SUS.
    What does it mean?
    regards,
    Ranjan

    Hi Ranjan,
    Unfortunately in SUS, Sales orders are referred to as Purchase orders only. Hence any PO with a number say 450000000 that comes into SUS will have a corresponding number in SUS as 19000000.
    Sam has already explained the PO response part.
    Regards,
    Nikhil

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Create number range for Service Entry Sheet (SES)

    I would like it is possible to configure the number range for Service Entry Sheet (SES) or it is fixed in the system? Besides, for my current configuration, the number only appear when SES is done but no reversal number if I reversed the SES, is this a correct setting? Or is there any way I can set the number for reversal document?

    Hello,
    Check below SAP link.
    http://help.sap.com/saphelp_40b/helpdata/fr/77/e12c7dd435d1118b3f0060b03ca329/content.htm
    Hope it will help. Revert back if anyfurther question/s.
    Regards,
    Anup

  • Plantwise separate number range for Production order

    Hello SAP Expert,
      I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
       Please give way to do this.
    Thanks in advance.
    Regards,
    Yogesh.

    Hi,
    As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
    Regards,
    Dhaval

  • Number range for service master record

    Hi..
    i have an issue in number ranges for service master record.
    when i create a service master record system is generating number ramdomly, its not in series..
    where do i make the settings so that i will get service master number ranges in series...
    Regards
    Sarfraz

    Hi,
    Follow the path:
    SPRO ->Material Management -> External Service Management ->  Service master ->  Define Number Range
    In menu ->Group-> maination->Aagian Group-> Insert
    Now Enter
    Number  Range  Group Text     01( example)
    From Number      80000000
    To Number     89999999
    & save.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on Apr 4, 2008 8:45 AM

  • External Alphanumeric Number Range for Internal Orders

    Hello,
    I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
    How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
    Any help will be appreciated.
    Thanks.

    how many do you need?
    Just one, that covers all?
    a0000000 - zzzzzzzz

  • Number range for Production order

    Dear All SAP PP Gurus,
    I am new to SAP PP and want to learn about number ranges for production order.
    Can anyone tell me step by step procedure for creating & Assigning
    number range.
    Thanks in advance.
    Regards.

    Hi MIHIR,
    I just chkd the blog spot of MR Siva.
    It is very much self expalnatory.
    Siva ,pls update more documents in ur blog,it is very much helpful
    THNX all

  • Number Range for Transfer Order

    Hi,
    When I create transfer order with reference to outbound delivery, an error message says "Maintain number range 01 for transfer order". I could see the number range 01 maintained in T- code SDPI. But I would like to know how we maintain number ranges for transfer orders and why this error message has come?
    Thanks,
    Betty

    Hi
    In-img-logistics execution-shipping -pickinglean ware house management--define control paramaters and no ranges for lean warehouse management
    1.Here you will define the control parameters for lean warehouse ( no ranges too)
    2.Define no ranges
    3. Assign no ranges
    Please check have you maintained entries for your warehouse here if it is lean
    In img----logistics execution-warehouse management-master data--define no ranges
    T code OMLW if it is central warehouse
    Regards
    Raja

  • Number range for different order types

    hi
    pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
    thanks and regards

    Dear ,
    Goto CO82 ,
    1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
    2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
    Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
    3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
    4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
    5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
    Revery back if u need any help
    Regards
    JH

  • Number range for Maintenance Order (IW31) - Any exit

    Hi All,
    I need to go for internal number overwite for Maintenance Order (IW31)for object AUFTRAG .
    I am going to maintain ztable which contain order type and  NRRANGENR.So,based on the ordertype i have to populate  NRRANGENR in the exit.
    Can you please tell me any exit or badi or through enhancement spot we can apply number range for maintenance order.
    Thanks .
    With Regards,
    Ambrose

    Hi,
    Do you need an exit ?
    You could create number range groups each with a specific number range. Then assign each order type to a particular group depending on which number range you want it linked to. If necessary have a different group for each order type.
    Configuration can be done in transaction SNRO for object AUFTRAG.
    -Paul
    Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum (for PM/CS specific topics).

  • Number Range for production order / Planned order

    Number Range for production order / Planned order depends upon what?
    Plant, order type, mrp controller??

    Dear,
    Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
    Planned order  :- Plant specific OPPQ or OMI2.  Number ranges for Manual creation - OMI3
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Different material document number range for Services

    Hi,
    I want to make different material document number range for services.
    I have created ZE document type from WE .
    But if I see group in OMBT , i am not able to assign ZE there. How to do this?
    Regards
    Kedar

    Hello,
    No ! I am not able to see ZE there.
    Kedar

  • External number range for service items?

    I want to create Purchase order with services using BAPI. Is it possible to set external number range for the extrow / introw, so that if I need to change a service line item, I will be able to find out which service item needs to be changed.

    It depends on whether you have a service master or not.
    1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
    2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
    Makes sense?
    A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
    Regards,
    Ravi
    Message was edited by: Ravikumar Allampallam

  • Multiple number range for planned order

    Hi,
    I want maintain different number range for MRP related planned order and manual creation planned orders. I have checked OPPQ and OMI2 transaction but i could not get any clue to create different number range for same plant. Let me know is how we can create.
    Regards / US

    Hi Uma,
    number range is dependent on plant alone and I don't think there is an user exit or badi to change number range at planned order creation.
    I guess the alternative is an enhancement or using some other field to determine what planned orders are manual.
    regards,
    Edgar

Maybe you are looking for

  • How to use Wake on Demand?

    Hello, I am trying to use the wake on demand feature to ssh from one mac to another while the targeted one is sleeping. According to this official page http://support.apple.com/kb/HT3774 , i can do this even if i do not own a time capsule or a apple

  • Aperture project photos not showing up in iWeb

    Hi, I posted this in the iWeb board as well, but have gotten no response. I use iWeb to create a website based around my photography and a blog I update periodically. I have been using this combination for at least two years now with no problems. By

  • Detecting deadLock in Remote JVM using JCosole

    I am trying to monitor deadloack situation in my JVM using JConsole shipped with JDK1.6.I am able to do it for JVM running in my local machine.On clicking the detect deadlock button, it lists the threads, if any, that are causing the deadlock. The pr

  • How escaping  "_" in a cond_syntax

    Hallo experts, I have a dynamic query like data: c_column(3)   type c value 'row'. data: l_condition type string. data: l_help_val type string. I fill for example l_help_val with  l_help_vla = 'test_test%'. concatenate c_column 'like l_help_val'   in

  • Setting background for safari

    I just recently swtiched to Mac and discovered that a few of my sites are lining up right because they were designed for IE, etc. This site in particular is a good example: Jeffrey Lloyd Website I don't know anything about converting for Safari. Is t