Number ranges in Loans management

Is there any function module available to find the number ranges in Loans management?
thanks and Regards,
Giri

best option is Search in SPRO
or else
FN-1                 No.range: FVVD_RANL (Loan number)
regards
Prabhu

Similar Messages

  • Number Ranges in Waste Management

    Hello EHS Experts,
    I´m struggling with number ranges in Waste Management. Our client has the requirement to split number ranges for the different business partners in Waste: generator, disposer, transporter... but there doesn´t seem to be a way to assign different ranges to the different roles.
    Do you know a way? Or the only possibility is to assign the same number range to all of them??
    Thanks a lot!
    Irene

    Hi Vikram,
    Thanks for your answer.
    As far as I know Waste Generation / Disposal... refers to the combination of Waste Generator (or corresponding Business partner) and Waste Material, which you define when you assign the materials that are generated in one Production Site (Generator), materials that can be disposed by one disposer...
    This is not what I´m looking for... what I need it to segregate Generator from Disposer, and from Transporter... the actual partners...
    Thank a lot anyway
    Irene

  • Number range in Solution Manager 3.2

    Hi ,
    we are using solution Manager 3.2 with oracle 9i and Bi 7.0 (development)
    While we  raise Solution Manager Ticket from BW Development system,it is
    not mainatainig the proper sequence number(number range).Rest all other systems are maintaining it properly.Recently we have upgraded the Support Pack for that BW Development system.its seems like  issue is happening after the SP upgrade.
    Please guide us to resolve this issue
    thanks in advance
    George Varghese

    Hello George,
    The best possible thing for you now ( assuming that everything was working absolutely fine before the upgrade and that you now continue to have no issues with raising tickets in other satellite systems ) would be to find out the side effects of the SP applied..... or may be look for notes resembling your problem.....
    SAP Marketplace is one the one you must look upto.....In the meanwhile just raise an OSS for the same..
    Inspire ppl by rewarding..
    Regards,
    Anand.....

  • How to change number range in solution manager

    Hi all,
    Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
    how/where can i change the sequence of the support messages(number ranges).
    Thanks & Regards
    Nick Loy

    Hi Prakar,
    Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
    System is not allowing me to chagne the existing one.
    now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
    01     0000000001     0000999999     780
    02     9999000000     9999999999     0         External
    I want to change the message sequence starting from 9999000001 which is in extenal number range.
    And one more thing, where can i find the number range which is being used for particular transaction?
    can you help me how to change?
    Thanks & regards
    Nick Loy

  • Number Range in Import  Manager

    Hi,
    Can I create a field which is automatically incremented with a specified number range and which is not unique??
    Regards,
    RK

    Hi Roman,
    The problem with AutoId is its unique. But, I am looking to populate a field which is not unique automatically.
    Regards,
    RK

  • NUMBER RANGES loans

    Is there any function module available to find the number ranges in Loans management?
    thanks and Regards,
    Giri

    Solved my self...!

  • SAP HR - RP_PLAN alphanumeriacal number range in SNRO

    Hi guys!!
    I have an issue regarding number range in Organizational Management for SAP HR.
    We have internal and external intervals and that's ok however, it's required to maintain external alphanumerical number range for positions, jobs and organizational unit.
    I saw in the RP_PLAN details that element is SUBGR - NUM8.
    Could I change this one to something like CHAR10?
    Let me know about solutions and risks assigned to this issue, please,
    best regards,
    Sandra

    Hi Sandra,
    No you cannot change the domain to CHAR10 for technical reasons. So you will have to use 8 digit number for PD objects.
    Kind Regards
    Christine

  • Define Number Range for Reference Number

    Hi all,
    I am trying to maintain Different Number ranges for Loans in ESS.
    Once i maintain Define Number Range for Reference Number in Loans ESS and trying to raise a new loan from ESS is till see that the ref number is still displayed 0 while raising the New Loan.
    No        From Number       To Number
    10       
    I maintained range for number range number 10.
    Pls suggest me on this.
    The above scenario works for claims but not for Loans
    Regards
    Vijay

    Solved my self...!

  • Get number range by gtin

    Is there any function to get number range by gtin number?
    I know the webservice "GET_NUMBER_RANGE_IN" but it wants EPC number not GTIN or materialID*
    how can i access Number Range for an device controller?
    Thanks..

    Hello Tuncer,
                      As you have rightfully pointed out the Web Service getNumberRange needs an EPC tag id.
    Question 1:
    So to suit your requirement there is a RFC Enabled Function module ie BAPI called
    BAPI_AIISRV_GET_NUMBER_RANGE  which generates a number range based on the actual objects
    ie GTIN
        SSCC
        GRAI
        GIAI
        DoD
    So since it is RFC enabled this BAPI can also be made as a Web service and used.
    Question 2:
    Why do you need to access the number range for a device controller on the first place itself. Number ranges can be managed at SAP AII level but i dont think so it is possible at the device controller level.
    It will be the device controller which will be accessing the service from SAP AII to generate the number range. SAP AII does not have the capability to generate number ranges and block number ranges specific to a device controller. However i think this capability can be ABAP coded and developed.
    Please revert if you have any other questions.
    Thnks and Regards
    Yogesh Bhatia
    Edited by: Yogesh Bhatia on Feb 13, 2009 8:40 AM

  • No number range found for 01 RP_REINR SP11--Travel Manager

    Hi
    While creating Travel request in in Travel manager i got this error messages"No number range found fo 01 RP_REINR SP!!-Travel Manager..Plse advice me how to resolve this..
    Thanks&best regds
    Shaila

    In adition to task from Shailaja .. Consider this:
    Please note that while defining your number ranges, the number must be two Digits  i.e ( 01,02,03)  , it must NOT be single digit  i.e (1,2,3)..
    I'd had the same issue, but with the two digits number it has been solved.
    Regards,
    Rodolfo

  • Organizational Management- Maintain Number Ranges

    Hi All
    In menu path :
    Personnel Management -> Organizational Management -> Basic Settings -> Maintain Number Ranges -> Maintain Number Ranges
    I have maintained the number ranges as mentioned below
    Job(C)  10000 to 20000,
    Position (S)  20001 to 30000,
    Org Unit (O)  30001 to 40000 .
    After maintaining i have saved in a Transport Request .
    Now am importing it in to the Quality .  In Quality i am getting only the Objects Job , Position , Org  Unit but the number ranges
    maintained above is not imported .
    Kindly let me know what  is the problem .
    Pls send me the solution how to transport the number Ranges .
    I would appreciate for an earliest response .
    Thanks in Advance

    Hi,
    Please check below SAP wiki link which will guide you and show different settings that may be required to accomplish along with issues you may face.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
    Thanks,
    Ameet

  • Batch management number ranges

    Hi guru's
        My client is using internal number ranges for my raw material
    but now they want to enter external number at the time of Goods reciept
    and also I want to make it mandatory for external number ranges.
    that mean system is proposing me internal number ranges now
    and user is updating external number ranges.
    My issue is system should not propose me any internal number ranges
    I want to update my external number ranges only
    could any body help me to solve this issue?
    which user exit i have to try or is there any other  option?
    Nilesh

    Dear,
    Set Up Customer Exits for External Batch Number AssignmentAs part of the external batch number assignment, the following two function module exits are available in the SAP enhancement SAPLV1ZE for checking a new batch number that has been entered.
    EXIT_SAPLV01Z_003. Using this exit, you can replace the proposed number range object BATCH_CLT and/or external interval 02 with a number range object and/or external interval you have defined yourself.
    You also have the option of suppressing the batch number check, for example, based on the material or plant.
    EXIT_SAPLV01Z_004. Using this exit, you can define your own checking rule.
    In this you write a code, if the plnat is so and so , then take this external number range, if youn want internal number range then use the following
    You can use SAP enhancement SAPLV01Z for internal batch number assignment. This enhancement contains two function module exits that you can use to define number ranges or templates for batch numbers:
    Goto OMCZ, Inactive internal no assignment for the batches.
    Now in OMAD- Maintain no ranges for object- BATCH_CLT
    Maintain external no range for that.
    Please rfer this also,
    http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
    Regards,
    R.Brahmankar

  • Org. Management Number Ranges

    Hi Experts,
    When I creating new position number by using FM RH_OBJECT_CREATE  in the program , I am getting the number range error.
    We have define a new plan version for creating this new postions.
    Is number range linked to plan version.
    Regards,
    IFF

    Hi,
    Whether number range is  linked to plan version can be configured:
    Chenk switch Number assignment for all plan versions: T77S0 ->Group:NUMRG     Sem. abbr:COMP          
    If you set the switch 'NUMGR COMP' to 'X', you can assign numbers across different plan versions.
    If you decide not to work with number assignment valid for all plan versions, you must create individual number intervals per plan version (and possibly also per object type). If you decide to use plan version- independent number assignment, you create number intervals that are valid for all plan versions. In this case, there is no danger of parallel number intervals occurring i.e. the same number interval for one object in one plan version and for a different object in another plan version.
    In the standard SAP R/3 system, number assignment is not valid for all plan versions.
    You can define number range in view T77IV.
    Hope helps,
    Chen Jian
    Edited by: Jian Chen on Sep 14, 2009 9:33 PM

  • Batch management number range issue

    Hello Experts,
    We have one requirement like this we are following Batch unique at material level. Client requirement is like this; they require separate number range for plant and order type combination. Is it possible?
    If it is possible please specify the steps.
    Thanks and regards,
    Ganesh

    HI,
    In our case we had to differentiate the batches for different plants and we have used the first digit as alphabetic character with reference to the plant. Here we had a single number range for batch creation but the first digit of the generated batch number will be an alphabet representing the plant. This was done with the help of the enhancement SAPLV01Z and EXIT_SAPLV01Z_001.
    Hope this helps you to satisfy your requirement.
    Regards,
    Ravi Kumar C.

  • Funds Management Budget number range

    Hi,
    Hi when I update budget through tcode FMBBC system generated document number sequesntially. But in "Maintain Number Range Interval for Budget Change Documents" current status shows different numbers.
    EG. document numbers FMBBC - 10000020.
    But number range status shows current document 10000029.
    When I post 10000021 document , current status does not get updated. But when I post more documents and document generated number comes to 10000030 then current status shows 10000039.
    Suggest.

    Hi, it's range for Line items, and 'number range interval for budget entry documents'  for header

Maybe you are looking for