Number Ranges In Order Type

Hi All,
I created a order type copying an existing one  with a object class of overhead costs assigning a number range. When i transport it in to production the number range has not been assigned. After that i deleted the created order type and re created it manuall. Same problem occuring. Plz advice why this is happening and suggest me an answer.
Thanks,
Ama

No. Ranges alwas you can create in the repective clients as these are not transportable properly.
So, please go to KOT2_OPA
select your order type and double click it
Click on change intervals button and assign the number ranges.
If you want to create a new number range, please go to KONK
Click on maintain groups
inside Interval --maintain.
assign this no. range to your order type, if you want.
Rgds
Murali. N

Similar Messages

  • Number range for order type

    Hi Experts,
    Can anybody please help me,
    How to Maintain a number range for order type YB01.
    I have tried in CO82 but there is no assignment of order type YB01 to  any group.Please tell step by step.

    Hi,
    In CO82 only after creating the number ranges you need to assign it to group.Go to change group fist select the group and then click on your order type and select select element symbol and then click on element\group and then save it.
    refer this link
    http://help.sap.com/saphelp_45B/helpdata/en/35/71896486c2223ae10000009b38f984/frameset.htm
    hope it helps

  • Assignment of number range to order type

    Hi all,
    Please help me out of this. How can i assign number range to the order type?
    Regards
    Kaisar

    Co82 let us say order number range maintenance
    let us say you have created a new order type and you want to assign a new number range
    In CO82..
    Menu path  Group -->maintain
    In maintain number range group screen,
    Group --> insert
    Give text and from number and to number 
    say text = new order
    range - 100000000000 to 199999999999 (tick ext check box if the range is external number range-manual input)
    click on +
    You can see your group at the end of list
    In Not assigned group your new order type will be present
    Place the curser on that order type and fallow the menu path as below
    Edit -->select element
    Select NEW order number range group check box
    edit --> assign element group.
    Now the number range is assigned to the new order. Save it, You will get a pop up, just ignore it.
    I hope it will help you

  • Number ranges for order types

    Hi
    I want to differenciate numbering of rework order type from the standard order type.Assign different number ranges to different order type.
    Shankar

    Hi Mr.Shankar,
    Please try out this,
    <b>1.In OPJH - Define Order type,As u said you are copying from PP01 type,after copying change the name of the order type say for Eg for Rework ucan chage it as RW01 and save it.Again carryout the same step to create 2 more order types say TT02 and TT03.
    2.In OPL8 - Define Order type dependent parameters,Enter the settings for the newly created order types for RW01,TT02,TT03 and save it.
    3.In CO82,Define the number ranges for individual order types as explained by our friend ,If you want external number assignment then Include a tick mark against the check box for an order type save it.</b>
    While using CO82,after going into the exact screen,in the top goto Group-Maintain groups (or else Press F6)and in the bottom of that page you will be able to see the newly created order types (which you have created) and now you can select the types and assign the number ranges in a different way for different order types.
    I hope now the system allows you to assign number ranges as per you need.
    If useful please reward your points
    Thansk & Regards
    Karthik
    Message was edited by:
            Karthikraj
    Message was edited by:
            Karthikraj

  • Number ranges for orders,deliveries,invoice

    Dear friends,
    I defined number range for sales order doc types, delivery documents,invoices.Now where can I assign these number ranges tomy doc types?.kindly clarify my doubt.
    regards,
    seetaram

    Hi Seetharam,
    You can assign the number ranges that have been created to there respective documents, as follows.
    1. For Sales Document Type(VOV8), select the required document type, and assign the number ranges in Number system tab - U can assign both Internal and External number ranges.
    2. For Delivery Document types in 0VLK.
    3. For Billing in VOFA - IN BIlling u can assign only Internal Number ranges.
    Regards
    Vamsi Javaji
    Edited by: vamsidhar javaji on Dec 11, 2008 8:00 AM

  • How to change number range for document type ?

    Dear All
    Experts
    How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as 
    Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
    Message no. FAGL_LEDGER_CUST093
    I have defined a leading ledger in system too with these settings
    1)     Define ledger for accounting.
    2)     Defining currencies for it.
    3)     Defining ledger group for the same.
    4)     Defining accounting principles
    5)     Assignment of principles to leading ledger.  
    Are there any extra settings required for leading ledger settings?
    I have some doubts those are :-
    How document types defined at ledger level?
    How to define them at leading ledger level?  (Like my case)
    Focus on this will be appreciable.
    Regards,
    Sharvari Joshi.

    hi ,
    The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the  number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
    coming to
    1.How document types defined at ledger level?
    2.How to define them at leading ledger level? (Like my case)
    Ans 1. please try defining document types for entry view in a ledger.
    path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
    upon prompt enter the ledger and go ahead creating the number ranges for the document types.
    Hope this helps.
    Regards
    amrutha

  • Guide in configuring number range by billing type in SD

    Hi gurus,
    Hope you can assist me in configuring number ranges by billing type (e.g. F2, G2, L2, etc) in SD.  Our Accounting people find it hard to account the completeness of the transactions because we are only using one range for the RV (SD docs).  We would like to setup a separate series per billing type.
    Your immedaite assistance is highly appreciated.
    Frances

    Dear Frances,
    1st Part
    Go to, T. Code: SNRO
    Insert, Object: RV_Beleg
    and Click Tab: Number ranges (just above the Field: Object)
    On to next screen, Click Tab: Intervals (with pencil-icon)
    Here, maintain your Number ranges, that you wanna assign to your Billing Doc. Types, i.e. F2, G2, L2 etc..
    2nd Part
    Go to, T. Code: SM30
    Insert, Table/View:
    and click Tab: Maintan (down, at screen)
    On to next screen, maintain entries as:
    Sales Org + Dist. Chnl + Sales Doc. Type (i.e. Billing Doc.) + IntNR (as maintained in 1st Step)
    Best Regards,
    Amit

  • Number range for order booking in CRM

    cAN ANY ONE TELL ME WHERE WE HAVE MAITIAN NUMBER RANGE FOR ORDER BOOKING IN CRM
    tHANKS IN ADVANCE
    BJ

    Hi Bagavath,
    The number intervals can be defined for activities, opportunities, sales and service transactions UNDER THE SAME PATH.
    IMG-CRM-Transactions-Basic settings-DEFINE NUMBER RANGES
    Note:
    Within the Internet scenario, you should set internal number assignment for business transactions in the CRM system. For internal number assignment, the document number is automatically proposed by the system within a specific interval. Since the sales orders are transferred from the CRM system to the R/3 system, you should set external number assignment in the R/3 system -this means number assignment which is not proposed automatically by the system.
    The interval for internal assignment in CRM should be the same as for external number assignment in R/3. In this way, you can make sure that the sales orders have the same number in the CRM system and the R/3 system.
    Regards,
    Satish Mathala

  • Assingment of Internal Number Range to different type of Maintenance Order

    Hi..
          We are implementing SAP Plant Maintenance. We have created 10 order type. We want to assign 10 number ranges to the order types. During "Configuring of Number Range" t.code OION , when I am inserting new groups for all 10 type of order, it is not accepting by the group name. Number range which i am giving to the desired group is saved in other groups.
           Can anybody help to adopt the right process sothat I can assign the correct internal number range to different order types.
    Thanks in advance.
    Regards
    TP

    Hi Pramod,
                   Please follow the procedure mentioned below:
                  Configure number ranges.
                  1. In the menu bar go to Group & Insert
                  2. Enter the Text & the interval i.e number range.
                  3. Now add the new group using the symbol ( + )
                  4. once this is done the new group will be reflected.
                  5. Then select the element ( order type) i.e to be assigned using F2 key.
                  6. Enable the check box against the new group ( respective group)
                  7. Now in the menu bar press Element/Group tab ( or Use F5 key)
                  8. The selected element(order type) will be assigned to the particular group that you have
                      selected.
                  Hope this will help you resolve the problem.
    Thnaks & Regards
    Arun Vijay D

  • Number Range for '01' type inspection lot

    Dear QM gurus,
    Inspection lot numebr getting increment by two instead one when doing GR against purchase order, please guide.
    Thanks in advance
    Kailash Thakkar

    It is impossible in SAP standard because the inspeciton lot origin can have one number range only.
    You can check why it is impossible in configuration.
    Customizing > Quality Management > Quality Inspection > Inspection Lot Creation > Maintain Inspection Lot Origins and Assign Inspection Types
    Regards
    Luke

  • External Alphanumeric Number range for order

    Hi  ,
    My requirement is to create an external number range for one PM order type where
    first 8 places from left can be alphanumeric and next 4 places should be numeric only .
    like EQ12341H0112
    here last numeric characters(in bold)  actually will specify month and year in format MMYY (0112 means jan2012) . So I doesn't want system to accept  last four characters as 1312 or 0012  also (because month should be in range 01 to 12 only)
    How I can achieve the same.What number range i should define for external entry .
    Regards
    PM
    Edited by: PM_SAP87 on Jan 18, 2012 11:41 AM

    Hi,
    You will not be able to achieve this specific logic by just defining a number range. What you can do is define an external number range that is alphanumeric and use exit IWO10017 to format and validate user entry.
    -Paul

  • Number ranges for orders - divide an existing one/ add a new one

    Hello,
    following two problems:
    - We have an CO order number range from 4000000 to 4999999; these range is used for quality orders as well as maintainance orders (two different order types): Is there a way to divide this number range into 2 (so e.g. 4000000 - 4499999 and 4500000 - 4599999).
    - In addition we have to add a new number range for a totally new order type. Unfortunately I don't find any possibility to add one to the existing ranges (T-Code KONK/ Customizing) - where can I do this?
    Thanks a lot in advance!
    BR,
    hansi

    Hi,
    In other words, you want to maintain number ranges as:
    4000000 - 4499999 : Quality orders
    4500000 - 4599999 : Maintenance orders
    You can split the number range into two by changing the existing 'To number' from '4999999' to '4499999' and creating another number range for 4500000 - 4599999. Now, it is a question of unassigning Maitenance order type from numer range1 and assigning to new number range (4500000 - 4599999) which I don't think is possible.
    As regards, creating new number range: KONK> Maintain groups (F6) > Group > Insert (F6)..give a text to the number range group and assign the number range. Once you have created the group assign your new order type to this number range group.
    Hope this helps.

  • Number range for document types

    Hi everyone,
    I want to have anumber range  3200000000----3299999999 for my PO document type ZEOH which is a copy of NB. The number range for NB starts with 45. Now when i am inserting the 32 series & than assigning to the doc type ZEOH system is giving error " insert valid intrernal number range". Please suggest what internal number range can i use or how to use the 32 series.
    Thanks

    Dear John,
    Check if you have maintained proper entries in:
    ItmInt - Item Number Interval
    NoRgeInt - Number Range Internal
    You should be able to save without any errors.
    Also, are you able to see the number range in the F4 help for ItmInt.
    Regards,
    Naveen.

  • Assign number range to Doc type

    Hi
    I have created a  new doc type - i am not sure for which co code business has to assign it... how can i create a new number rnage without co code specification... I know i can assign new no range thru OBA7, but let me know where to create it without co code specification
    Thnx in adv

    Hi,
    If I understand you correctly, you want to create one number range for a document type that can be used by all company codes. Eg Doc Type ZA created. Number range assigned is 10000  to 20000. You want all company codes (1000, 2000, 9000 - 3 company codes in  your system )to use the same number range.
    Here is my question
    1. When a document is created (irrespective of companycode), system should pick the next document number. Eg co.code 1000 creates document number 10351, then if a document is created in co code 2000, system should pick 10352 as document number. Am I correct?
    These type of continous numbering is not possible for FI postings, but they are possible for Material documents, CO documents.
    I am thinking of a different way to get this. Create all these document number range in each company code and make them as externally assigned. Then while saving a document, based on some abap coding that you write, pick the last number used in all company codes and populate the next document number to save.
    Hope this is what you want.
    Bye
    Vijay

  • Number range userexit same type of PR but  for different Plant

    I would like to have the same type of PR but  for different Plant, I would like to have different Number range.
    The exit  MM06E003 M06B0003 Mo=06B0004  not work for ME51N.
    Any other  exits help for this

    HI
    Put this code in  EXIT_SAPLMEREQ_009
    DATA pr_header TYPE mereq_header.
    DATA pr_items  TYPE mmpur_requisition_items.
    DATA pr_item   TYPE mmpur_requisition_item.
    DATA: l_item   TYPE mereq_item.
    DATA: l_zmm_numrange    TYPE zmm_numrange.
    MOVE-CORRESPONDING eban TO l_item.
    CALL METHOD im_req_header->get_items
      RECEIVING
        re_items = pr_items.
    READ TABLE pr_items INTO pr_item INDEX 1.
    CALL METHOD pr_item-item->get_data
      RECEIVING
        re_data = l_item.
    CHECK l_item-werks = '6301'.
    CALL METHOD im_req_header->get_data
      RECEIVING
        re_data = pr_header.
    SELECT SINGLE * INTO l_zmm_numrange
       FROM zmm_numrange
       WHERE  werks EQ l_item-werks
         AND doc_type EQ 'PR'
         AND bsart EQ pr_header-bsart.
    IF sy-subrc EQ 0.
      ex_range   =  l_zmm_numrange-numki.
    ENDIF.

Maybe you are looking for