Number ranges transport -urgent

Hi
When we use copy company code function,as i noticed the number ranges of the
source company code will be will be copied for the target company code.
When i see the number ranges after transporting to QAS all number range status are set to zero for the target company code .when i checked the request it contains NIRV Table entries for the target company code.
Now my question is ,copy company code request contains entries in so many tables including NRIV,If i tranport this request my worry is does it overwrite the
all the PRD number ranges data or just it will updates only the Target company code data.
Thanks
Lily

Hi,
When you copy a company it copied the number ranges to the target company and put this in the transport for the new company code (not the old one).
In the situation I used this it was no problem.
Have a look in your transport and there you can see the key field with the company code for the transport.
When you are not hapy for 100% make screen prints from the numberranges in PRD before you tranport it. When it's go wrong you change it manual back.
(Do only transports dor new companies not existing companies)
Paul

Similar Messages

Number range transport problem in Internal orders

Hi,
I created new internal order type in KOT2_OPA t. code and at the time of saving it is asking number range. so i assigned one number range interval to the order type and saved the application in development server and noted down the request number. i released the request to the Testing and Quality server. in that it is not showing the number range in quality server. What i have to do. Does i have to do any configuration for the moving of number ranges to testing from development. please guide me deeply it is very urgent for me.

Hi,
Number range objects can be saved in workbench requests & transported manually.
Thanks
Kishore

Number range issue -urgent

Hi ,
     We are transferring master data from one system to another system. Since there would be clash of number ranges , we want to make number range as manual ( i.e. external ) for a given master data type.
Since we don't want to do it manually , is there some function module which can do this and again redo this .
Regards,
Divyanshu

hi divyanshu,
As Neil ,Patrick and Amit said it would be better if u take the resource help of a Functional consultant .
Moving   master data from one system to another system , yeah obviously there will be a clash for number ranges if not now in future it may arise .
Are u trying to reverse(master data) the procedure from Production data to Testing system or vice versa? U didnt mention that whether its a table or whatever stuff it is .
The process is we set define the number range in SNRO say I defined ZXXX . The range is 000000000000001 to 999999999999999999 unique to a system .
say I have generated 2000 numbers for a process under a ZXXX in development system , the same object now when run in Testing may be different , now in production that will vary as well this is the criteria.
so if u r trying to move the data then u need to map the appropriate number as this may be a primary key/Foreign key in the field for some tables say Ztables if u have in this scenario.
Function module Number_get_next   is used to generate the next number . Say like I had 10000002456 as my last number then when I want to see my next sequence then it has to start from 10000002457 so this fm does that.
Dont look for a Function module as of now, just check the values what u want to move , with proper fixes .
As per rules plz dont use the word Urgent .
forgot to add..
a number range usually is very critical as we maintain that number for a unique combination so if its a primary key then dont depend on do redo process by an fm .
Regards,
vijay
Message was edited by: Kan vijay

Prefix Number range: Transport number range

Hi All,
Here is the situation. there are 2 dev servers. the prefix number range in both are maintained as 901 . The workflows will be trasported to a single prod servers. Now as i understand this will create some trouble in prod coz two workflows in two system might have the same number.
Now I think maintaining different number range might help. but when transporting to prod how willl this number range will be taken into account. I mean how to make sure that 901 will be transported as 901 and same as 902 range? Do i need to maintain some config in prod system or just reserving both the number ranges 901 and 902 in prod will solve the issue? Just need some confirmation ..
Thanks in Adv !
Anuj Sethi

Exactly. The numeric ID that is assigned to your workflow template follows it through the transport system in the same way that the include for a function module follows it.
The difference between workflow templates and reports (in this matter) is that you are not allowed to define the program name of the workflow template. Instead it is composed from the prefix and the next available number in that prefix range.

Number range transport request

Hi,
pls tell me are number range intervals not transported using transport request, if yes then how are number ranges appear in prod. server.
thanks
Kavita

Hi All,
thanks for the inputs, but wish to understand the scenario completely I am practicing on IDES and i have been told tht we do not transport number range requests....my question is once we maintain number ranges on dev. server and then carry out customistion i.e. creating OM objetcs like position, job etc......which will be alloted numbers.....now when we move to prd server....then will these objetcs have the same numbers.....or first we maintain number range in prd server then import the customised OM objects
sorry to bother ....but need to understand
thanks Kavita

Error in Number range object - URGENT

I changed one attribute(let say X) of a characteristic(A) from dis to nav and transported to QA. The transport failed saying that the intervals for the number range object for X does not exist.
In DEV RSRV check on X, A shows no errors
any suggestions how can I fix this prob

try attribute change run first if dont work try this
you can increase the number range buffering size... go to se37 use functional module rsd_cube_get and then click on the test/execute(f8) button, then put in your cube name , then for i_obj put in a and then for i_bypass put in x press the execute button. the click on the blue icon next to E_T_DIME. you se your dimensions there. you now need to increase the buffer size for the dimensions that are receiving high volumes of records. so on the same screen not the dimention tht you want to increase the size of, scroll to the right hand side extreme and note down the NOBJECT number starts with BID. then go to transaction SNRO, put in the number you noted down and click on the change icon.
Now in the edit tab on top drop down set up buffering and select main memory.
now under "No. of numbers in buffer type in 500
save and click yes to continue
setting the number range too low will not help in load performance significantly, whereas setting it too high will consume a lot of memory on the application server, which will effect other applications.monitor the memory usage during data loading to find an appropriate number.
hope this helps

Number Range Transport (BW)

Hi Gurus,
We are transporting the BW objects from the BW Dev box to QA. Due to unavailabilty of few number range objects the transport got failed. We went to SNRO in QA to define the Number Range for RS_OBJNUMG. On again importing the same request, we got the issue resolved.
Is this a recommended way for any BW Transport (both QA and Production)?
Is it a good idea to execute the following programs in the target box (QA or Production)?
RSDG_REPAIR_NUMBER_RANGES
RSDG_OBJNUMG_CREATE_INTERVAL
The number ranges are maintained in NRIV. The number of records in this table is different in Dev Box and QA/Production box. How can we have both Dev box and QA box in sync in terms of number range objects?
This time my questions more or less revolve around- how do we maintain number range in Quality and Production?
I would appreciate all the help.

Hi check this
Program RSDG_OBJNUMG_CREATE_INTERVAL during BW Transport
Jaya

Number Ranges- Transport

Hai Gurus,
Can we transport number ranges from one envt to other envt.
can any one please clarify the doubt;
If it can be transported what are the preventive measures to taken care.
Thanks in Advance
take care
sameer

Dear sameer basha
No number ranges cannot be transported from one client to another client. It should be created and assigned in the same client. For example, if you want to maintain some number ranges for sales documents, you should create in production client itself using TCode VN01.
thanks
G. Lakshmipathi

Material Master Number Range - Very Urgent

Hi ,
My client is having existing material codification as below :
all material types for e.g. ROH, HALB, FERT will be starting their material code with 00 or 01 or 02 etc. sine the first two digits denotes the year , which will vary from material to material. The characters used will be from minimum 8 to maximum 14 - Alphanumeric.
for e.g. my material code will be
for ROH - 000040101F0101
for FERT - 00801000101
for HALB - 013000101C
here for all materail type first 2 digit are for year and next will be prod. code , then assy , then sub assy , if forging applicable it will be F , if casting then - C
How this can be mapped in SAP as one series for all material types, is it possible for system to identify the material type, what is advantage & disadvantage of the same.
Pl. help
Thanks & Regards,
Vikas Mayekar.

Hi
Using Standard SAP for Material number ranges may not be able to map your requiremnts.
But you can use the SAP enhancements available for the Number ranges determination & so onj...
Please use the User exit in CMOD or SMOD
You can use enhancement MGA00002 (for industry) or enhancement MGW00002 (for retail) for this.
For more information, see the documentation for the following components assigned to these enhancements:
Industry
EXIT_SAPLMG02_001
EXIT_SAPLMG02_002
Retail
EXIT_SAPLMG72_001
With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
EXIT_SAPLMG72_002
With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
EXIT_SAPLMGNK_003
Please take help of ABAPer's for implementing the same
Thanks & Regards
Kishore

Vendor Master Number Ranges....Transportable?

Hi All,
Are Number Ranges transportable? For example if I create a new account group for the Vendor and Number rage in developement and maintain the interval for the number rage....would all of this be transported to production? Or do I have maintain the interval in the production?
Can anyone clarify?
T

Hi,
yes, we can transport all the number ranges. U try XKN1 , first u create a Request by selecting "Interval---->Transport". Now u created a request having all number ranges. Now we can import all the numer ranges by using this request.
I hope u may get some idea...

How to control Held documents number ranges

Hi Gurus.,
pls tell me How to control Held documents number ranges.,
its urgent .one of my client asking separate number ranges for held documents
with regards
ramesh

Dude,
I understand you are refering Hold Document not Park document. Becoz Park document use the same number range which is used for normal document posting. However, for Hold Document Number ranges, i advice you to liaise with your Abaper for BADI/Exit/ or etc etc.....for maintaing a specific number range or validation of number given.
pls assign point if useful

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

Transporting error! While transporting Number Range Object

Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
Error Log Detail.
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
Anand

Hi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR.

Transport of Number range and release proceure and split valuation

Dear Gurus,
Can we transport number ranges from PRD server to Quality Server?
Also, how will we trasport split valuation and release procedure?
Kindly suggest..

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics & values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Transport number ranges to production server of withholding tax

Hi
I have created the number ranges in the development server and saved in one request, but the number ranges are not working in Production system. How can i again transport the same request in production system.
I tried to transport it again but it is showing in grey mode.
Thanks

Number ranges are suggested to be maintained directly in the production client.
Even if you want to transport, Go to SE01 and check that your trans then port include the number range you want to transport.
Regards,
SDNer

Number ranges transport -urgent

Similar Messages

Maybe you are looking for