Number Ranges Year Wise
Hello All,
This is with the reference to the Thread
[Number range;
My client want to maintain the number ranges year wise for Billing, Orders etc., We have suggested not to go with Year wise best practise
Is there any OSS notes which tells that number ranges can not be maintained fiscal year wise?
Regards,
Narasimha Kumar
As said in above replies,
You can achieve the same by using USEREXIT_Number_range in include;RV60AFZZ.
where create new Ztable = ZNR_Billing:
Year / Sales Organization / Distribution chanel(Optional) / NR interval.
eg: 2010 / Z100 / Z1 = ZZ
where Z100 -= Sales Org & Z1 = Dist Channel &
ZZ = Number range Interval (maintain number ranges in SNRO for ZZ- Make sure interval should not be overlap with other number ranges, but i dont think its possible.
eg:
Z1:2009--> 1000 - 9000
at the same time you cant create another number range in SNRO as Z2:1000-9000 ( numbers will overlap)
But i f you dont maintain same numbers in different years, then you can use the above Userexit, but still doesnt have any sense to use Userexit, when you dont maintain same numbers.
Similar Messages
-
Number range plant wise for delivery
hi,
how maintain number range plant wise for delivery.
can any one suggest which user exit to use.
thanks & regards,
ChetanHi
if you want to create the number ranges for plant wise delivery . you can use table maintain the data and use user exit for the trigger in delivery table
Regards
S.pavan -
Hi Experts,
I have to generate separate number range plant wise while posting the document in Migo.
Please suggest me how to do this.
Regards
MohitHi Mohit ,
first u need to check in CONFIG or try to post in MM forum.
regards
Prabhu -
Dear Sir,
We want to have miro number range plant wise, how can we achive it. Matter is very important.
Thanks in advavnce
IshuHi,
You can use user exit LMR1M003 to get the number range.
Thanks. -
Purchase order number ranges plant wise
Hi ,
Requirement is , want to have purchase order number plant wise. I know that we can have different number ranges for different document types in standard SAP. But how to achieve different number ranges for purchase order plant wise.?
Is there any user exits available for this?
regards,
abiHi,
it is possible through a BADI to get the separate number ranges for plant wise PR/PO,
but u need to maintain a customised table with number ranges and plants,
whenever the user try to save a PO/PR the syatem will pick the number range from the customised table,
that BADI is ME_PROCESS_PO_CUST,
it is very useful if any client has number of plants like 30 or 40 plants,
and it is easy track the PO from where it has raised.
rgds -
Is it possible to create Order type with different number ranges-Plant wise
Hi Experts
Client wants to get the different number ranges for the order types created in the different plants. Is there any user exit for the same.
I have assigned the order type to the different plants. And Order type is assigned to a no range. So whenever a order type is created in different plants; order types uses the same number ranges.
so with this situation one cann't know the total no. of order created within a plant.
Is there any solution for the same.
Pease give your valuable solutions.
Regards
PankajHi
Best way is to create different order types for different plants.
like we have order types OR15 ,OR20 & OR30 for different plants 1500 ,2000 & 3000 .
you can assign different number range for different order type.
this is simplest solution.
Regards
Sujit -
Business Area Wise Number Ranges
Hi All,
Can you please guide me how to maintain Business Area wise Number Ranges for Vendor and Cust Payment , FI Invoices and other Fi documents.
Regards,
JavedHello,
Number ranges cannot be maintained per business area.
Number ranges are created at company code level. Please see transaction code FBN1
You can create number ranges year dependent or year independent
You can create number ranges external or internal
You assign the number ranges to document type in OBA7
One document type can have only one document number ranges. Whereas, a single number range can be assigned to one or more than one document type.
Regards,
Ravi -
Plant wise, Delivery type wise number range
Is it possible maintain of number range plant wise and delivery type. If possible can suggest the user exit with related program.
Can some body arrange the document regarding depot excise process which inclusive of A certificate registration etc.Hi Rao,
use MV50AFZ1 user exit
FORM USEREXIT_NUMBER_RANGE
Reward points if it helpful
Regards
Govind. -
Number Ranges Intervels for Year 2006
Hi Experts,
My User want define the Number ranges For the Year 2006, When I am defineing the nuber ranges fro th Year 2006 its saying Enter the Intervels Withhout Overleep,
All ready i don the inter vels for the year 2007, Right Know I am changing only Year, remining sequence i am giving as tis,
Pls advice me on this issue,
thank you
Regards
SreeIncase of SD, we do not have the provision of maintaining number range yearwise, as in FI module.
I suppose if you are trying to maintain number range in SD in T.Code: VN01 & which is already assigned or in use, system will not allow to overlap the number range.
In FI, it is possible to maintain the same number range year after year in T.Code: FBN1 & if you are getting the said error in FBN1, then certainly you require to check where the overlap is & resolve it.
Hope the above is helpful to you.
Regards,
Rajesh Banka
Reward points if helpful. -
Billing Number Range /Sales Documents Numbering Range
HI Friends
HI Friends
I would like to control Numbering Range Year Wise Like 2008-2009 Should be Started Numberings Range From 10000000 TO 2000000 (2008-2009) , 30000000 TO 40000000 (2009-2010) Automatically. How we can control in this scenario.
Regards,
UdhayUnlike FI (RF_BELEG) and Excise (CIN), in SD (RV_BELEG) fiscal year is not part of the number range.
Your requirement is not possible as such.
During closing you can change the last number to, say 199999, so the next document fetches the number 200000. But the user can make a document in year 2009-10 with document date in 2008-09. -
Hi all
Could one tell me, Can we maintain CO document number ranges per year.Right now we have maintained no. ranges as per standard. Any suggestion why don't we use CO document no. ranges year wise.(In FI module we maintain no ranges per year.)
any help would be highly appreciable.
Thanks
Nilesh.Hi Frnd,
Controlling is fully internal Accounting system and FICO is fully integrated.
As per FI point of view there are several document types and to which the number ranges are alwz assigned.
Whereas in cotrolling there are not document types created and simply the number range are assigned.
Whever the FI will be generated, at the same time relevant CO document will also be generated and general number range for CO will be generated as per configuration.
As per the standard, CO number ranges are not year specific.
it simply the integrated with FI and other modules....
I hope u understood...
ASSIGN POINTS IF USEFUL
Regards,
JT -
Invoice verification number ranges
Hi
After processing a payment in MIR7, document number 5100519088 was assigned. When user processed the next payment 51000519063 was assigned. Can some one explain how these document numbers are being allocated, Normally the documents numbers are allocated in a sequential order..
Checked in ILV number ranges, for all document types it is taking only one number ranges i.e 51.
For creation and reversal invoice document it also taking same number ranges i.e 51
Please help me to understand why it is not taking number ranges sequence wise ( only for 6 invoice documents)
Thanks
AndappaHi,
there can be various reasons for the gaps in invoice numbering.
Please review the following notes in relation to gaps in numbers used:
62077 Info: Internal number assignment is not continuous
193020 Invoice verification: Gaps in number assignment
175047 Causes for FI document number gaps (RF_BELEG)
Main reason for numbering gaps is buffering. This is also described
in attached note 62077.
Document numbers can get lost in invoice verification if after choosing
the 'Post' function (F11 or Ctrl+S) the system generates an error
message or a termination message. In this case instruct users to pay
attention to whether the system generates terminations or error messages
after choosing post (F11 or Ctrl S). Ask them to note the message ID and
the numbers, preferably together with the time. It is worth discovering
a procedure, peculiar to your company or system configuration, that
causes the system to generate other error or termination messages after
posting (that is after number assignment). This should not normally be
the case. All this is explaind in note 193020.
Best Regards,
Arminda Jack -
Budget / Planning document number range per CO area
Hi,
I am facing the Issue for the budget and planning document number range.
We are having 3 co area's in one server. I want to seperate it out the the number range for the planning and budgeting documents specific to co area.
Please advice to do the same.
Also the same issue with Claims numbers. How to resolve this.
regards,Hi Friend,
we are also check the no. range consistency & their is no inconsitenacy. what happen in COBK that it update the co document number range in a sequence. but in NRIV table it skip hundred & take the above number range. it mean CO document number & Current Number status which differ in COBK & NRIV table. why it happen we coundnt understand?
can we maintain co document number range yearly?
Warm Regards,
Dhananjay R. -
Dear Gurus,
We have two plants in our company code and we are implementing QM for both the plants.I have regarding number ranges--> Inspection Number Ranges for Inspection Characteristics,Number Ranges for Inspection Methods,Number Ranges for Inspection Plans,Number ranges for inspection lot..etc
My query is -->Are these number ranges maintained at client or plant level.I think its client,but no sure.How can define number for different plants for the all above mentioned .
Regards RamRam,
As per SAP standard Inspection lot number range we can not maintain plant wise.
Please follow following path to get idea:
SPRO --> Quality Management --> Quality Inspection --> Inspection lot creation --> Maintain Number ranges.
Here you would see this number range are stored in inspection lot origin, they apply to the entire client. So it would be applicable to client wise not plant wise.
So if you maintain number range for "01" like From 010000000000 to 019999999999, then this number range would be applicable to all plant of client for 01 origin.
If you still want to assign number range plant wise then you can maintain custom table for number range inspection type and plant wise, but to define number range externally plant wise is not advisable.
Hope this helps.
Thanks!!! -
Warning percentage prolem in CO document number range
Hi all
I have changed the warning percentage from 5% to 20% in rk_beleg object in SNRO transaction.
According to the warning percentage i have changed the current number of a particular transaction (KP26) above 80% thro KANK transaction.
But when i am posting the CO Document the system is not issuing the warning message KC103 "CO document number range is almost exhausted"
Please thro a light to check the settings in the system.
Thanks in advance
baskaran
+91 94483 72362Hi Friend,
we are also check the no. range consistency & their is no inconsitenacy. what happen in COBK that it update the co document number range in a sequence. but in NRIV table it skip hundred & take the above number range. it mean CO document number & Current Number status which differ in COBK & NRIV table. why it happen we coundnt understand?
can we maintain co document number range yearly?
Warm Regards,
Dhananjay R.
Maybe you are looking for
-
Product hierarchy is not being maintained in the sales order material
Hi, I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In
-
Hello, I have a report with an selection screen with a few input parameters. This results in an alv grid being displayed. The users downloads the alv grid to excel. This works fine. I'd like to include the input parameters as the top row in the downl
-
Help I need to install new os x on my erase drive
I erased my macbookpro to install Mac os x and there is no restore cd that come with it but I got another and also download and it will stocked on s black screen with dash line and while connected to internet to download directly it won't go. Also in
-
Can't enable Tap-To-Click with ALPS touchpad
Hello, I installed Archlinux on my vaio and I am trying to get the ALPS touchpad to work. I've tried the xorg.conf solution but tap-to-click doesn't work. So I tried using the HAL policy. This almost works, but I have to open gsynaptics tool and enab
-
FRM-40655 SQL Error Forced Rollback
Hi, I am getting the following Error: Why this appears? FRM-40655 SQL Error Forced Rollback: clear form and re enter transaction. ORA-24324: service handle not initialized Madni