Numbered bullet list-default values

I have been using Text Expander to insert templates into Pages documents. One of these templates creates a simple numbered bullet list, with only the number one, followed by a period.
When I add text to this bullet list and press enter or return, I get each new number in sequence. However, there is a preset “Text Indent” under the “List” tab, and a preset “Left Tab” under the “Tabs” tab.
The Text Expander macro is saving the text in rich text format.
Is there a way to set default values for the “Number” bullet list in the tab value, such that I do not have these indents and tabs whenever I start a new bullet list?
Thanks

@Jerry-
Thanks much. I've been reading on styles, and it does exactly what I need.
Mucho gracias!

Similar Messages

How-To populate SELECT LIST default value from SQL Query

OK, I've done my homework, and did not find my answer in the Forum, so here it is.
I have a Page that displays fields from a SQL Query. The Page also has below that radiogroups, checkboxes, and Select Lists to allow the user to change values in the fields that are displayed at the top of the Region. I am able to pre-populate the radiogroups and checkboxes by performing a SELECT in the 'Source value or expression' of the Source area of the Page Item.
However, I am unable to do the same for the Select List fields. Their default value ends up being the first value in the LOV ('-- None --' for NULL values). Source Used: Only when current value in session state is null. Source Type: SQL Query. Also, when I first go into the Page when running it, and check the Session State values, they are all null, so I don't understand why the field is not populated by the SQL Query statement as the radiogroups and checkboxes are.
Any suggestions??? I've tried all sorts of combinations.

Thank you for the suggestion.
I had considered that, but cannot do so, because we are using Oracle Application Express more for development than for data containment.
We have all our data in an Oracle 10.g DB which is separate from the OAEX server, and the OAEX app will reference that data via VIEWs and DB LINKs. We are doing so primarily as an added data security layer, where the data is housed separate from the app, in case the Web site is ever compromised. The data that can be viewed is restricted to a subset of the actual data that is available.
Since the data is on a separate server, (I assume) we will not be able to set the source type to Database column, because (I asume) that is dependent upon the data being housed by the OAEX server.
That still leaves me with having to populate the field with a SELECT statement from the Oracle DB. This unfortuneately is almost a show-stopper for me because of down-stream processing data requirements. Have not been able to come up with contingencies yet.

Dropdown list default value in Visual Composer

Hi all ,
i have dropdown list in my Visual composer layout i have values coming like 2001 to 2014 ,everything is fine . i need to display default value in the dropdown list should be curent year like 2009when i deploy the application by default the current year should be displayed in input field.

Hi Venkatp,
To Assign the function into the dropdown inputfield DSTR(NOW(),'YYYY') and you can to display the current year
Followings links are available to display the dateformat,
http://www.sdn.sap.com.ngrs.net/irj/scn/index?rid=/library/uuid/60535002-571c-2c10-58b6-cc27faa7be4d&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/7556c6b7-0e01-0010-878b-cbf4dbe859eb&overridelayout=true
Regards,
Prabha

Static list default value.

I need to retrieve the default value of a static list Crystal report parameter. InfoView honors this setting but I haven't found the field exposed in the Java SDK. I'm using com.crystaldecisions.sdk.occa.report.data.IParameterField to access the parameter properties.
Any pointers would be most welcome.
Thanks

Hi,
In your model project, create a view criteria (on the VO which you would be using for displaying values in the LOV). In your view criteria add the attributes and set default value (say add Empno and set its value to literal 1111). Now, when creating LOV for the next view object, select the view criteria you've created in previous step (instead of using all queryable attributes).
Refer : http://docs.oracle.com/cd/E23943_01/web.1111/b31974/lists.htm#BEIBAFDD
-Arun

Select List Default Value

I have wondered about this for a while but haven't found an answer, maybe because I haven't searched for the right thing.
With a select list, is there a straightforward way to specify the first item on the list for the default value?
What is the best way to handle a case where the query providing the list of values may take a while to complete? I don't want to double the setup time by repeating the query just for the sake of finding the first item.

Yes, it is. I am never using default values but computations. Default value will be set only after page submittion and not on load. A computation will set the item session state on load. Usually, you use some kind of condition for the computations to set the value of the item to something only if the item value is NULL. One of the reasons is also that the computations are visible in the page property and default values are hidden within the item properties.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

LOV/Choice List - Default Value in Update OAF page

Hi Guru's,
Need help please, I am looking at personalization but its not working for me to default a value in Group by LOV/Choice List.
Please provide some pointers so that I can achieve this.
I have Requisition page from Buyer Work Center in Oracle US Purchasing Super user. when I pick requisition to update it. It goes to update page, in here I have a header "request".
In this request have a Group By LOV/Choice list it has initial value set to "Default", I wanted to set to "Requisition".
Is it possible by Personlization?.
OR
Is it possible by OAF page modification.
if OAF page update, can I get some information to get Page info and update value.
Thanks in Advance to all.

Hi,
You need not do this via personalization... Set the profile po%def%group%. This should take care of that.
Regards,
Praveen

Possible bug ? - Default value for select list

4.2.1
Hi, I have one page with a couple of reports. I have a time period filter on top. Its a select list with values 7 days, 3 months and 12 months. Default value is set to 3 (where return values of select list is 1,2,3 resp).
Now in page 1 which has this select list, :P1_SELECT it has a report which shows counts of number of items purchased. When the user clicks on the count(hyperlinked column), it takes the user to another page which runs the details of the items and also uses the Page 1 select. It works fine when I change the time period. However, if I dont change the time period in the select list when I first login, althought I have set the default value to 3, the interactive report on page shows no data found, because the select list default value I guess it does not recognize.
Is this a bug?
Thanks,
Sunil

ryansun wrote:
4.2.1
Hi, I have one page with a couple of reports. I have a time period filter on top. Its a select list with values 7 days, 3 months and 12 months. Default value is set to 3 (where return values of select list is 1,2,3 resp).
Now in page 1 which has this select list, :P1_SELECT it has a report which shows counts of number of items purchased. When the user clicks on the count(hyperlinked column), it takes the user to another page which runs the details of the items and also uses the Page 1 select. It works fine when I change the time period. However, if I dont change the time period in the select list when I first login, althought I have set the default value to 3, the interactive report on page shows no data found, because the select list default value I guess it does not recognize.
Is this a bug?NO.
Default values is only populated on the clien side and NOT in the session.
This has been discussed thousands of times in the forum..found this with a simple search {message:id=4440597}

Bulleted List Help. I should know how to do this but I must be missing something.

I need to create a bulleted list that does this:
1. Subject One
a. Sub subject
b. Sub Subject 2
I can create a bulleted list.. but how do I created a nested bulleted list like above so that the 2nd item in the list is indented in and starts with an a. ?
IDCS3

In CS3, something like this
Create from Bullets and Numbering, Type > List, defaults to a numbered list. For the sub set create a copy of the first and set the List type to use a., b., c etc (from the numbering style, I also set level 2)

How to remove % sign from List of Values

Hi ,
I have shared list of values thats is based on SQL query. At runtime the select list default value is showing as "%". Can someone suggest how to remove % and replace with null (blank)
Thanks
Aali

In ist of Values region, if you select display null as 'Yes', in 'null display value' area use space tab or type something like ' - Select-' to replace %. Or, choose Display null as 'No.

LOV default value from the list of choices

How Do I set the default value of an LOV to be something selected from the list of choices? It's the first item returned, if that helps.

I'm populating it with a query, and it populates fine.
select to_char(jobno)||' - '||jobdes d, jobno r
from [email protected]
where jobno != 10000
union all
select '1000000 - Non Chargeable' d, '00000' r
from dual
order by 1;
It sets up the 1000000 numbered job to be first, but it sets the default to null.
I tried setting source to be populated by SQL query, and I use this to populate it
select '1000000 - Non Chargeable' d, '00000' r
from dual;
but it doesn't work correctly, and when I submit it it tells me incorrect number.

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

How to make default value in a drop down list

Hi,
I have created a drop down list using Selection-Screen code. I have three values in it. I would like to make one of the option as a default value. How to achieve it?
I am working on module pool program. I have few screens as a part of my program. I have created print button on tool bar of one screen but that print button is appearing on the other screens too. How to avoid it?
Help would be appreciated...
Thanks
Edited by: mohammed ibrahim on Oct 10, 2008 8:43 PM

1) let drop down box be g_dd.
if g_dd is initial.
g_dd = option2.
endif.
2)
by default same pf-status is used by all the screens in the same program
if sy-dynnr = 'screen_no'. " for screens for which you do not want button to come
set pf-status 'abc' excluding 'fcode_of_button'
endif.
or
data: git_fcode type sy-ucomm with header line.
git_fcode = 'fcode_of_button'.
append git_fcode.
if sy-dynnr = 'screen_no'. " for screens for which you do not want button to come
set pf-status excluding git_fcode
endif.
Edited by: Amit Gupta on Oct 11, 2008 11:36 AM

How to show first parameter value in drop down list as a default value dynamically in ssrs report?

Hi,
in my ssrs report i have two parameters, accounts and Manager ,there is a cascading between the accounts parameter and manager parameter, as per the cascading we will get managers names based on the account we selected in the accounts parameter,
my requirement is the first name in the mangers drop down list has to get selected as default value.
please help me with this, it is an urgent requirement.
Thanks in advance,
Naveen

Hi NaveenMSBI,
According to your description, you want to use cascading parameters in the report, if the accounts are selected when you preview the report, the first manager name will be selected from drop down list as the default value. If so, there can be two scenarios:
• If manager is single-valued parameter, we can get Available Values and Default Values from the same query as below. Then when the accounts are selected, the first manager name will be selected as default value.
SELECT managerName FROM table_name WHERE accounts IN (@accounts)
• If manager is multi-valued parameter, we need to use different query for Available Values and Default Values. In this case, please refer to Patrick’s solution.
For more information about Adding Cascading Parameters, please refer to the following document:
http://technet.microsoft.com/en-us/library/aa337498(v=sql.105).aspx
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

Numbered bullet list-default values

Similar Messages

Maybe you are looking for