Numbering not continuing after table

I have a strange thing happening with a numbered list.
First, I created a style named "List number 1" and entered information as follows:
1. Step 1
2. Step 2
Between step 2 and what SHOULD be step 3, I added a table with one row and one column. When I go to number the next step, I get Step 4.
e.g.
1. Step 1
2. Step 2
Header 1
Header 2
4. Step
I made sure that the table is not style "List number 1" so I'm a little confused on why this is happening.
Any suggestions??

I'm not really sure why its happening, but I can tell you how to recreate it and how to get rid of it.
Make a paragraph style that has numbering on (I just made a new one that was identical to the Basic but changed it to a numbered list)
Make a text frame
Type a few characters then a return
Repeat step 3 a few times (I made three paragraphs in total)
Insert a table after the third paragraph return (doesn't matter how many cells), click below the table to move the cursor from the first cell in the table to after the table and hit return
Repeat step 3 a few more times
At this point, I have paragraphs 1-3, a table, and tparagraphs 4-6, with the table not being numbered.
Now, if you place the cursor after the last keystroke in the third paragraph (you may want to show Hidden Characters in the Type menu at this point) and hit the right arrow button, it will place the cursor just before the table in the 4th paragraph. If you insert a character (I used a spaceband), the table will jump down a line and a #4  with a space will appear above it. If you hit the delete key to remove the character, the table will jump back up but still be numbered 4. But, if you hit delete again (placing the table in the third paragraph, or sort of, an inline object would be in the third paragraph, but tables seem to act a little differently) then hit return, it will place the table back into the 4th paragraph, and it won't be numbered (the paragraph after the table will be numbered 4 instead of 5).
If anyone can explain why this happens, I'd be interested.

Similar Messages

  • Management Studio 2008 does not refresh after table create / alter

    hello
    Management Studio 2008 does not refresh after table create / alter, why?
    f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
    regards, jan

    Hi jm,
    I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
    or concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Why is my keynote not continuing after a slide?

    I have recently tried to paly my keynote presentation and it will not continue to play after a certain slide. I have music on the one slide that will not move onto the next, maybe this has something to do with it? Please help!

    Delete the slide, add a new slide and replace the content.

  • MDT 2012 - Will not continue after Windows 8 x86 LTI Deployment First Logon - FAILURE (Err): 429: CreateObject(Microsoft.BDD.Utility) - ActiveX component can't create object

    I've looked at all the other threads I could find in Technet that look close to this issue.
    In my BDD.log, the last entry is "FAILURE (Err): 429: CreateObject(Microsoft.BDD.Utility) - ActiveX component can't create object" right after "RUN: regsvr32.exe /s "C:\Users\ADMINI~1\AppData\Local\Temp\Tools\x64\Microsoft.BDD.Utility.dll""
    I have the following:
    C:\_SMSTaskSequence folder
    C:\MININT folder    
    LiteTouch.wsf link under the Startup Folder
    Deployment share is mapped properly
    System logs in automatically as local administrator
    Even with this, it does not automatically resume the imaging job. I do not understand why it is not continuing.
    If I launch the LiteTouch.wsf from an Admin elevated cmd window, the Task Sequence resumes like nothing was wrong.
    Any guidance is appreciated!
    EDIT1: I changed my customsetting.ini file to join a workgroup instead of the domain and it appears to be continuing without issue now. Is there something I am missing as to why it does not automatically run when it joins to a domain?

    Just wanted to provide an update.
    So, i took the suggestion of a few other blog posts and moved the object into the Computers Container in AD so it did not have any policies impacting it. After doing this, it properly cycles through the application installs and reboots in the Task Sequence
    while joined to the domain.
    Is there an sort of comprehensive list of GPO settings that break MDT? The ones I have found (legal prompt, etc.) we do not do so it has to be something else.

  • Chart does not update after table changes

    Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart.  I use named ranges
    because you can't use table nomenclature directly in the chart series definition.

    Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
    If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
    Guidelines to post a workbook on OneDrive
    Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer  Right click on the selected file and select Send to -> Compressed (zipped) folder.)
    Go to this link.  https://onedrive.live.com
    Use the same login Id and Password that you use for this forum.
    Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
    Right click the file on OneDrive and select Share.
    Do NOT fill in the form; "Select Get a Link" on the left side.
    Click the button "Create a Link"
    Click in the box where the link is created and it will highlight.
    Copy the link and paste into your reply on this forum.
    Regards, OssieMac

  • Some games to not continue after splash screen.

    I've already asked it on answers.microsoft.com but didn't get any reply. So, thought I would ask here.
    What I've tried:
    App troubleshooter
    sfc /scannow
    Answers in http://superuser.com/questions/562188/windows-8-metro-apps-wont-load
    also, I've tried some technet links but in vain.
    I've installed two games - Sonic Dash and Despicable Me 2:Minion Rush. Both of these games to not work after splash screen and they get minimized.
    I've checked the event log and found this
    Activation of app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational
    log for additional information.
    And full details here
    Faulting application name: Template.exe, version: 2.0.0.0, time stamp: 0x5492b318
    Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53086d7c
    Exception code: 0xc000027b
    Fault offset: 0x000fb152
    Faulting process id: 0x1418
    Faulting application start time: 0x01d0227a62078008
    Faulting application path: C:\Program Files\WindowsApps\SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c\Template.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
    Report Id: 9fbff746-8e6d-11e4-a383-c0cb38d6092f
    Faulting package full name: SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c
    Faulting package-relative application ID: App
    Apparently it has something to do with remote procedure call. When I open the other game, I get same errors as the above, the only thing which has changed being name of the app.
    Graphics shouldn't be a problem since these games have ALREADY run once, but not now, and I have other heavy-graphic games like Asphalt 8 Airborne which still WORKS.
    I've also tried re-installing but in vain, duh. Looking for help badly. I'd appreciate any help.

    Sorry. Those two links too didn't work. I did all that was instructed in them. However I really appreciate your effort in solving my problem.
    I checked the event log in the path which you asked me to and got this
    Activation of the app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App for the Windows.Launch contract failed with error: The remote procedure call failed..
    And a detailed view
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
    <EventID>5961</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5961</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-28T04:44:28.735933800Z" />
    <EventRecordID>71148</EventRecordID>
    <Correlation />
    <Execution ProcessID="1060" ThreadID="5520" />
    <Channel>Microsoft-Windows-TWinUI/Operational</Channel>
    <Computer>Amit</Computer>
    <Security UserID="S-1-5-21-66860032-2800664797-2745505841-1010" />
    </System>
    - <EventData>
    <Data Name="AppId">SegaNetworksInc.56538047DFC80_as33fap47kd3c!App</Data>
    <Data Name="ContractId">Windows.Launch</Data>
    <Data Name="ErrorCode">-2147023170</Data>
    </EventData>
    </Event>
    Can the error log be of some help?

  • Keyboard letters and numbers not working after (?) serious memory use (?)

    So I've been having problems with my keyboard on my MBP 15-inch, Early 2011 (OS version 10.7.5, fully updated). It stops working after I use Photoshop or InDesign (cs6) for a long period of time or when I'm surfing the web a lot. The best example where it for sure stops working when surfing the web is when I'm on tumblr and I scroll through dozen of pages on my feed. When it stops working, the only keys that continue to work is everything but the numerals and letters.
    I've taken it in, replaced the keyboard and talked to apple support and they can't figure it out. I assumed that it stops working because of all the loading images, info and memory that is in use when applcations are open but I don't know if it's because of memory.
    One thing that always occurs right before the keyboard stops working is this sound from the speakers that sounds like gears turning three times or three fast ticks. Only once has the letters and numbers start working and I don't now what I did to make it come back but I heard the three ticks play again.
    But my only solution to make it start again is restarting the computer.
    Does anybody have this problem/know the solution to make this stop?

    The only Upperfilters and Lowerfilters you were supposed to remove were the ones in 4D36E965 which is for the Optical Drive.
    The other keys, for example 4D36E966 and 4D36E967 etc.. are for other devices, such as the keyboard, mouse, and possibly other devices like sound and graphics. This is not good, because its hard to manually restore those filters without knowing what was in there before you deleted them.
    Did you backup the registry before deleting the keys?
    You could try a System Restore to restore the registry back to a previous state. If you boot into Safe Mode (press F8 or F5 before XP boots up), you can select a previous date to restore back to.
    Then follow these instructions http://support.microsoft.com/default.aspx?id=314060

  • Form is not working after table refresh

    I've made a form and have added pre-insert trigger for the block. And the form is working perfectly fine with no issues.
    Two new columns have been added to the table and have to be added to the form now.
    I opened the data block wizard of the form and did a refresh of the table to get the two columns. After I pressed the "refresh" and then tried to run the form(but did not add new columns), the pre-insert trigger fails and starts throwing me an error that value has to be entered.(FRM:40202)
    After further analysis I also found out that there was null value being passed into another item. Actually when I refresh the Datablock wizard I can see this column on the left hand side than being present on the right hand side.
    Kindly if you could help on the same.

    Hi Vidhya
    pre-insert trigger fails and starts throwing me an error that value has to be entered.(FRM:40202)that's FRM-40202 (Field Must be entered)
    pls make sure any new db column that's defined as NOT NULL in the table that u r trying to insert in is pre-insert has an insert statment.; must have a value.
    the main issue here is ur table u r trying to insert in ; it has nothing to do with the form wizard's item on the left or the right hand side.
    Hope this helps...
    Regards,
    Abdetu...

  • Integration Process not continuing after Synchronous BAPI call

    I have an integration process that splits up a batch file of purchase orders into single purchase order messages. This allows me to use the "ForEach" block to call the synchronous BAPI_PO_CREATE1.
    I have managed to get the process to call the BAPI and create the purchase order. The response message arrives back though the abstract synchronous interface and is mapped to the asyncronous response message. After that the process seems to hold where I am expecting it to continue on the process and be appended to a container storage list for mapping to a single return message.
    I have not set up any correlation sets as I thought they wouldn't be needed for a sychronous call.
    Has anyone got any advice on my approach to this process and how I might fix it.
    Thanks in advance

    Hi Bhavesh,
    There are no errors as such in the SXMB_MONI but it gets as far as the Inbound Message (PE_ADAPTER) stage after the Sych BAPI call.
    Also the SOAP Header at this stage seems to be missing "sysnchronous" or "asynchronous" in the  SAP:ProcessingMode tags.
    The technical workflow is as follows
    FTP Batch file outbound to Integratin Process Receive (Async)
    Transform message into a Multiline list of BAPI_PO_CREATE1.request (async abstract)
    Enter "For Each" Block using the multiline list.
    BAPI_PO_CREATE1 mapped to synchronous abstract interface
    synchronous abstract interface mapped to BAPI_PO_CREATE.request and response
    BAPI_PO_CREATE.response mapped to async BAPI_PO_CREATE.response
    async BAPI_PO_CREATE.response appended to multiline list
    Exit block
    Transform multiline response list into single line response
    FTP inbound
    As far as I can make out I have not correctly configured the receiver of PO_CREATE1.response after it has been mapped from the sync to async so it just persists it and sits there waiting or it is waiting for somethign else to happen.
    Let me know if I can clarify anything further.
    Thanks
    Ben

  • Process chain not continue after successful node

    Hi gurus,
       In my process chain I load data from R/3 to PSA and then execute DTP to DSO, all actions are serially. Usually our PC is running well. But recently the PC will stop after the loading to PSA was successfully end , which means in the log view of PC this node was green.
       I have checked the table  RSPCPROCESSLOG, the entry here was also marked as successful. ( STATE = G )
       I have no idea why this PC wouldn't continue automatically?
    Regards,
    Aaron

    Hi Ashok,
      We have tried manually execute DTP to load data from PSA into DSO. Everything is OK. And as I mentioned, this PC was OK before! Sometimes when execute the failed PC several times, it runs correctly.
       This is why it looks so weird! I guess is it related to time exceed (load to PSA cost 2 hours) or some potential restrictions?
    Regards,
    Aaron

  • TABLESPACE cleanup not happening after table data delete

    Hi all
    I have a partitioned table with 4 partitions all residing in a single tablespace. I populated the table with sample data and then deleted all with a simple delete statement followed by a commit. But the tablespace is still showing data from the 4 partitions under the bytes column in query below:
    select segment_name, partition_name, tablespace_name, bytes
    from dba_segments
    where tablespace_name='tb_name'
    Am I missing something here? Do I need to run some other command after delete and commit to fully flush out the data?
    FYI, my system specs are:
    Windows 2008 Server Standard (32-bit)
    ORACLE 11.1.0.7.0

    HI,
    LMT is Locally Managed Tablespace.
    +Moreover, when you say the blocks will not be available immediately when do you reckon they will be available? How do I go about automating this to free up space as soon as data is deleted?+
    You cannot automate this job, this is already automated by Oracle.
    +FYI, both pct_free and pct_used come up as empty values for my table.+
    reason for a NULL-value for PCT_USED is that the tablespace where the table resides uses automatic segments space management (ASSM). With ASSM there is no need for PCT_USED only for PCT_FREE. Oracle manages blocks automatically.
    You dont worry about releasing the space, Oracle will take care of it automatically.
    Go through the below link
    [http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#ADMIN10065]
    [http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/schema.htm#sthref2100]
    [http://www.dba-oracle.com/art_builder_assm.htm]
    This is an extract form Oracle docs
    Understanding Reclaimable Unused Space
    Over time, updates and deletes on objects within a tablespace can create pockets of empty space that individually are not large enough to be reused for new data. This type of empty space is referred to as fragmented free space.
    Objects with fragmented free space can result in much wasted space, and can impact database performance. The preferred way to defragment and reclaim this space is to perform an online segment shrink. This process consolidates fragmented free space below the high water mark and compacts the segment. After compaction, the high water mark is moved, resulting in new free space above the high water mark. That space above the high water mark is then deallocated. The segment remains available for queries and DML during most of the operation, and no extra disk space need be allocated.
    You use the Segment Advisor to identify segments that would benefit from online segment shrink. Only segments in locally managed tablespaces with automatic segment space management (ASSM) are eligible. Other restrictions on segment type exist. For more information, see "Shrinking Database Segments Online".
    If a table with reclaimable space is not eligible for online segment shrink, or if you want to make changes to logical or physical attributes of the table while reclaiming space, you can use online table redefinition as an alternative to segment shrink. Online redefinition is also referred to as reorganization. Unlike online segment shrink, it requires extra disk space to be allocated. See "Redefining Tables Online" for more information.Regards,
    Vijayaraghavan K

  • IDOC Partner numbers not continuous?

    Hi,
    sorry for my bad english.
    we are sending IDOCS from one SAP systen to an other SAP System.
    We have internal number assignment and the numbers are buffered (20 numbers).
    We have the following problem:
    In the target system sometimes the Idoc numbers have gaps over 1000 numbers and we did not know why?
    Gruß
    Toni

    Hi Toni
    Point 1:Are you assigning internal number for every idoc or Specific to that Message Type.
    Point 2: What do you mean by  'numbers are buffered (20 numbers).'
    can you explain little bit more...
    Thanks
    Ramesh

  • Why does the app vorlagen fuer numbers not work after ios7 update

    After ios7 update the app vorlagen fuer numbers won't open anymore, but vorlagen fuer numbers 2 works.

    I have been unable to find any app that works with Numbers on IOS7. I can still read them on IOS 6.1.3 with an iTouch.
    Numbers on IOS devices still works.

  • Numbers not opening after new update. Tried turning computer off completely but no luck. Any ideas as need it urgently for work! Thanks

    Please help! I have just done the new update for numbers and uploaded Mavericks, but Numbers now doesn't open and says.....do the new update to open. I have......really need this for work, so any help gratefully received!
    Thanks

    Hi dj,
    Numbers '09 is still on your computer. In a folder called 'Work '09 inside your Applications folder. If you can't find it, use Spotlight to search.
    This might get you by until your problem is solved.
    Regards,
    Ian.

  • TS1368 I would like to buy a song but would not continue after singing term and conditions

    regarding to buy music on I tunes

    Hello everyone,
    I just resolved this issue. There are some apps/songs that will put you through an infinite loop. For the time being, if you are willing to throw away .99 cents on an app, try to download "Perfect Browser" or any other app, really (Perfect Browser is just what I used) and accept the terms and conditions when they pop up. For Perfect Browser, it accepted my "accept" and then I was able to download what I really wanted just fine.
    It's sort of a roundabout way to do things, but I hope this helps others.

Maybe you are looking for