Numbering Plan ISDN Luxembourg
Dear,
We have a challenge using a variable length numbering plan in Luxembourg, they use a range of 6 digits +2 digits you choose yourself freely.
So for example if you have a range +35 2 111 111XX, the first digits are fixed and behind those you can freely choose.
The provider cuts the first part (6 digits) and you only get the last 2 on your E1 for incomming calls.
This is ok, we have configured this to work with Translation Patterns, but we have one challenge with outgoing calls
With the outgoing calls we only get the first digits to the receiver, so only +35 2 111 111 but not the last 2 digits, and if the party attempts to do a redial the voicegateway gets an error.
Cause i = 0x809C - Invalid number format (incomplete number)
Does anyone have any experience with these variable number plans, maybe in luxembourg.
If i am guessing this problem correctly then this what happening...
When you receive an inbound call from Telco you only get called number as XX and calling number as +35 2 333 222. Now when you make an outbound call (redial) you only able to dialing +35 2 333 222 without the last two digits and the gateway gives an invalid number format error.
To resolve this first you need to ask Telco to send correct calling number i.e. including last two digits , so that you can redial in correct format.
If my guessing it wrong , can you please explain it with example numbers and call flow.
Rate all the helpful post.
Thanks
Manish
Similar Messages
-
Support for non US numbering plans
Hi All,
I'm wondering if WebOS 1 or 2.0 supports non US telephone numbering plans.
For example, I'm in a country where we have a different numbering format than the US 7 / 10 digits numbering plan. Our numbers consist of 8 digits and I don't like to see my contact's number in another format.
Thanks in advance,
Nick
Post relates to: Treo 680 (Unlocked GSM)These are user-to-user forums. We have nothing to do with Apple or the policies of foreign stores. You can call AppleCare in your region for help.
-
E.164 numbering plan E.164 numbering plan E.164 numbering plan
Dears,
just i need from my Voice Gateway AS5400 to send telephone numbers by E.164 formate to Billing systm.
so what the configuration i must add to AS5400 ????
thank you.You can check this document for more information on AS5400 with e.164 numbering plan:
http://www.cisco.com/en/US/docs/routers/access/as5350/software/configuration/guide/54voice.html -
Mgcp gateway incoming & outgoing numbering plan
dear sir,
we wish to do as follows:-
please share any idea.
1. based on the attached configuration, we wish set configuration to only allow incoming call. any impact on that? what's the best way to configure it?
2. we will have another cisco3725 with 80% similar configuration as no.1 and 2 new voice E1 pri line with 2 set of numbering plan at the cisco3725, we will set it for outgoing call.
please advise your best idea to perform the above. thanks.This URl should help you:
http://www.cisco.com/warp/customer/788/AVVID/cm_mgcp_intro.html -
Multiple ISDN dialer stops routing
Hi,
I have a 1721 with the BRI WICs.
The router is used for remote control for a series (20 different) sites, which callback for security reason.
It happens that after a while (two hours of operation) when I ping a site, the router starts dialing, but routing never occours and, after another piece of time, if I ping the router does not dial, even if debugging shows interesting traffic.
This is a sample of the configuration:
hostname myhost
username Site1 password Site1
username Site2 password Site2
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
no ip domain lookup
no ip cef
ip audit po max-events 100
no ftp-server write-enable
isdn switch-type basic-net3
interface BRI0
bandwidth 128
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp multilink
interface BRI1
bandwidth 128
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp multilink
interface FastEthernet0
ip address 10.0.0.1 255.255.255.0
speed 100
full-duplex
no cdp enable
interface Dialer1
bandwidth 128
ip address 172.16.1.253 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name Site1
dialer idle-timeout 30
dialer string 0XXXXXXX
dialer caller XXXXXXX
dialer load-threshold 1 either
dialer-group 1
no cdp enable
ppp multilink
other dialer are similar, then
ip classless
ip route 192.168.1.0 255.255.255.0 Dialer1
access-list 100 deny 53 any any
access-list 100 deny 55 any any
access-list 100 deny 77 any any
access-list 100 deny pim any any
access-list 100 deny udp any eq netbios-dgm any
access-list 100 deny udp any eq netbios-ns any
access-list 100 deny udp any eq netbios-ss any
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
What's wrong with this???
Help please!
Thanks in advanceI'll try to remove the multilink's and I'll tell what will happen. Anyway, shouldn't bandwidth 128 command allow one remote site to connect to main site using max 2 B-channels?
This is the dialer on the remote site that handles the connection with the main site.
interface Dialer99
ip address
encapsulation ppp
dialer pool 1
dialer remote-name myremote
dialer idle-timeout 30
dialer string 0XXXXXXXXX
dialer string 0YYYYYYYYY
dialer caller XXXXXXXXX callback
dialer caller YYYYYYYYY callback
dialer-group 1
no cdp enable
ppp authentication chap
ppp multilink
The dialer string 0YYYYYYYYY means that the dialer string has a leading zero, as per italian numbering plan, while the called id has not. This is the reason why dialer string has a leading zero and dialer caller doesn't.
Ciao -
Voice over IP: ISDN PRI Voice E1 - Calling Out problmes (PSTN)
Hi All,
Has anyone seen this before in a 'debug isdn q931' on a H323 gateway.
*Jun 15 07:39:03.893: ISDN Se0/2/1:15 **ERROR**: CCPMSG_OutCall: fails with cause 0x22.
When I am trying to call out side getting busy signal.The incoming calls working fine. But some times it working without any problems.
Please go through the attached configs...
Thanks
Ilyas10.31.144.2#sh controllers e1
E1 0/2/0 is administratively down.
E1 0/2/1 is up.
Applique type is Channelized E1 - balanced
Cablelength is Unknown
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20080918, FPGA: 13, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
Data in current interval (351 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
10.31.144.2#
10.31.144.2#sh network-clocks
Network Clock Configuration
Priority Clock Source Clock State Clock Type
1 E1 0/2/1 GOOD E1
10 Backplane GOOD PLL
Current Primary Clock Source
Priority Clock Source Clock State Clock Type
1 E1 0/2/1 GOOD E1
10.31.144.2#
*Jun 25 04:49:30.483: ISDN Se0/2/1:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Calling num 73845
*Jun 25 04:49:30.483: ISDN Se0/2/1:15 Q931: Sending SETUP callref = 0x02D4 callID = 0x8260 switch = primary-net5 interface = User
*Jun 25 04:49:30.483: ISDN Se0/2/1:15 Q931: TX -> SETUP pd = 8 callref = 0x02D4
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Calling Party Number i = 0x0181, '73845'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x80, '141'
Plan:Unknown, Type:Unknown
10.31.144.2#
In this output the E1 was up - able to call outside..., will try to get the down time output if necessary -
Outgoing to ISDN calls fail with cause 0x2C
Cisco 2821 with 4 E1 connected to PSTN. Most outgoing calls flow without any issues, but sometimes fails (debug isdn error shows "CCPMSG_OutCall: fails with cause 0x2C"). I see enough free timeslots in E1 at this time. This E1 using for outgoing calls only, incoming calls come via other E1.
Router configuration:
controller E1 0/1/1
framing NO-CRC4
pri-group timeslots 1-31
interface Serial0/1/1:15
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-net5
isdn timer T303 120000
isdn incoming-voice voice
isdn map address .* plan isdn type national
isdn send-alerting
isdn negotiate-bchan resend-setup
isdn bchan-number-order ascending round-robin
isdn sending-complete
no isdn outgoing display-ie
trunk-group PSTN 10
no cdp enable"debug isdn q931 detailed" & "debug isdn error" show:
ISDN Se0/1/1:15 Q931d: Default type/plan 0x0 0x1 sw-type 18 Calling number 4242510458 isdn_map 0 mask 0x3022
ISDN Se0/1/1:15 Q931d: Calling plan/type unspecified in call_decode, so ignored.
ISDN Se0/1/1:15 Q931d: No call_decode, isdn default set
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 4242510458/.*, (regexp)
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 4242510458, isdn/unknown to isdn/national; Oct3a 0x81
ISDN Se0/1/1:15 Q931d: Default type/plan 0x0 0x1 sw-type 18 Called number 9262151 isdn_map 0 mask 0x3022
ISDN Se0/1/1:15 Q931d: Called plan/type unspecified in call_decode, so ignored.
ISDN Se0/1/1:15 Q931d: No call_decode, isdn default set
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 9262151/.*, (regexp)
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 9262151, isdn/unknown to isdn/national
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 4242510458/.*, (regexp)
ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 4242510458, isdn/unknown to isdn/national
ISDN Se0/1/1:15 **ERROR**: CCPMSG_OutCall: fails with cause 0x2C
ISDN Se0/1/1:15 Q931d: L3IF_rx_L2_pak: received data
080285335A
ISDN Se0/1/1:15 Q931d: L3_Go: source 0x020A, event 0x005A, call id 0x0000, int id 0x0
ISDN Se0/1/1:15 Q931d: L3_Go: event 0x5A cr_len 2 cr 1331
ISDN Se0/1/1:15 Q931d: L3_Go: call_id 0x84C9 cr 0x533 state 19 event 0x5A ces 1
ISDN Se0/1/1:15 Q931d: L3_ProcessEvent: callref = 0x0533 RELEASE_COMP:U19_ReleaseComp(nlcb)
ISDN Se0/1/1:15 Q931d: L3_state_change: callref 0x0533 old RELEASE_REQUEST, new NULL_STATE -
hi guys.
i have a t1 running isdn 5ess.
looking with show controller call-counters i see this :
DS0's Active: 1
DS0's Active High Water Mark: 1
TimeSlot Type TotalCalls TotalDuration
1 pri 0 00:00:00
2 pri 0 00:00:00
3 pri 0 00:00:00
4 pri 0 00:00:00
5 pri 0 00:00:00
6 pri 0 00:00:00
7 pri 0 00:00:00
8 pri 0 00:00:00
9 pri 0 00:00:00
10 pri 0 00:00:00
11 pri 0 00:00:00
12 pri 0 00:00:00
13 pri 0 00:00:00
14 pri 0 00:00:00
15 pri 0 00:01:47
16 pri 0 00:00:00
17 pri 0 00:00:00
18 pri 0 00:00:00
19 pri 0 00:00:00
20 pri 0 00:00:00
21 pri 0 00:00:00
22 pri 0 00:00:00
23 pri 0 00:00:00
notice that b channel 15 has duration even though no call is going through. here is the config of the controller :
framing esf
pri-group timeslots 1-24
and the d channel settings :
no ip address
trunk-group 019
isdn switch-type primary-5ess
isdn not-end-to-end 64
isdn incoming-voice modem
isdn map address .* plan isdn type unknown
isdn busy b_channel 15
isdn T310 45000
isdn send-alerting
isdn sending-complete
no cdp enable
as you can see i set channel 15 to busyout after this problem.
thanks in advance.What do show isdn service and show isdn status say about this b channel?
-
Luxembourg phone number formatting in iOS = 4.0
Hello,
Since upgrading to iOS 4, phone numbers here in Luxembourg are no longer displayed in a readable way, the formatting is incorrect.
Example : the correct phone number 26 52 26 52 would be displayed as 2 652 2652. That's bizarre, not logical and not readable. The first digit is not a prefix, it makes no sense at all to group phone numbers as # ### ####. You could show it in blocks of 2 or 4 (3 would be a bad choice because numbers are usually 6 or 8 digits).
Is this a know bug ? In MacOS you can define your own number formats in the address book, but that's obviously not possible in the iPhone.
PascalYes, Region Format is set to Luxembourg. Language is set to English. I should have mentioned that my wife and my friends have exactly the same issue with their iPhones.
Pascal -
Problems dialing from a external modem to a isdn router
Hi,
I have trouble with my modem dial-in in an other router using his isdn interface.
The problem looks like the following:
The calling router:
router-2523#debug dialer events
Dial on demand events debugging is on
router-2523#ping 172.16.4.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.4.1, timeout is 2 seconds:
00:17:50: Se5 DDR: rotor dialout [best] least recent failure is also most recent failure
00:17:50: Se5 DDR: rotor dialout [best] also has most recent failure
00:17:50: Se5 DDR: rotor dialout [best]
00:17:50: Se5 DDR: Dialing cause ip (s=172.16.4.2, d=172.16.4.1)
00:17:50: Se5 DDR: Attempting to dial 51
00:17:50: CHAT5: Attempting async line dialer script
00:17:50: CHAT5: Dialing using Modem script: Dialout & System script: none
00:17:50: CHAT5: process started
00:17:50: CHAT5: Asserting DTR
00:17:50: CHAT5: Chat script Dialout started.....
Success rate is 0 percent (0/5)
router-2523#
00:18:02: CHAT5: Found abort string BUSY expecting CONNECT
00:18:02: CHAT5: Chat script Dialout finished, status = Connection aborted
00:18:02: Se5 DDR: disconnecting call
router-2523#
The called router:
router-2503-II#debug isdn events
ISDN events debugging is on
router-2503-II#debug isdn q931
ISDN Q931 packets debugging is on
router-2503-II#
00:18:58: ISDN BR0: RX <- SETUP pd = 8 callref = 0x01
00:18:58: Bearer Capability i = 0x9090A3
00:18:58: Channel ID i = 0x8A
00:18:58: Progress Ind i = 0x8583 - Origination address is non-ISDN
00:18:58: Calling Party Number i = 0x01, 0x83, '15', Plan:ISDN, Type:Unknown
00:18:58: Called Party Number i = 0x81, '51', Plan:ISDN, Type:Unknown
00:18:58: CCBRI_Go Fr L3 pkt (Len=27) :
00:18:58: 5 1 81 90 4 3 90 90 A3 18 1 8A 1E 2 85 83 6C 4 1 83 31 35 70 3 81 35 31
00:18:58:
00:18:58: ISDN BR0: Incoming call id = 0x000B, dsl 0
00:18:58: ISDN BR0: LIF_EVENT: ces/callid 1/0xB HOST_INCOMING_CALL
00:18:58: ISDN BR0: HOST_INCOMING_CALL: (non-POTS) VOICE
00:18:58: ISDN BR0: HOST_INCOMING_CALL: (1) call_type = VOICE
00:18:58: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = FALSE call type is VOICE ALAW
00:18:58: ISDN BR0: Event: Received a VOICE call from 15 on B2 at 64 Kb/s
00:18:58: ISDN BR0: Event: Accepting the call id 0xB
00:18:58: ISDN BR0: INCOMING CALL: VOICE ERROR: Bearer capability not available(0x3A): bchan 1, call id B
00:18:58: ISDN BR0: process_disconnect(): call id 0xB, call type is VOICE, b_idb 0x24F470, ces 1, cause Bearer capability not available(0x3A)
00:18:58: ISDN: get_isdn_service_state(): idb 0x24F470 bchan 3 is_isdn 1 Not a Pri
00:18:58: CCBRI_Go Fr Host InPkgInfo (Len=9) :
00:18:58: 7 0 1 0 B 3 18 1 8A
00:18:58:
00:18:58: CCBRI_Go Fr Host InPkgInfo (Len=13) :
00:18:58: 5 0 1 0 B 3 8 1 BA 8 2 80 BA
00:18:58:
00:18:58: ISDN BR0: TX -> CALL_PROC pd = 8 callref = 0x81
00:18:58: Channel ID i = 0x8A
00:18:58: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x81
00:18:58: Cause i = 0x80BA - Bearer capability not available
00:18:58: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x01
00:18:58: CCBRI_Go Fr L3 pkt (Len=4) :
00:18:58: 4D 1 81 97
00:18:58:
00:18:58: ISDN BR0: LIF_EVENT: ces/callid 1/0xB HOST_DISCONNECT_ACK
router-2503-II#
00:18:58: ISDN: get_isdn_service_state(): idb 0x24F470 bchan 3 is_isdn 1 Not a Pri
00:18:58: ISDN BR0: HOST_DISCONNECT_ACK: call type is VOICE
00:18:58: ISDN BR0: HOST_DISCONNECT_ACK: VOICE ERROR: Bearer capability not available(0x3A): bchan 1, call id B
00:18:58: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x81
router-2503-II#
Does anyone know whats going wrong and why I could not get a connection th the 2503-II router? When I try the connection from an other router using isdn on both sides the connection works fine...
I added the configuration of both routers in the attachments...
Best Regards
MarcosHi,
I configured the ISDN BRI Intaerface on the Router-2503-II in the following manner:
router-2503-II#sh run int bri 0
Building configuration...
Current configuration : 133 bytes
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn incoming-voice data
end
router-2503-II#
after this I tried it again and got the following debug output:
router-2503-II#
00:11:54: ISDN BR0: RX <- SETUP pd = 8 callref = 0x01
00:11:54: Bearer Capability i = 0x9090A3
00:11:54: Channel ID i = 0x8A
00:11:54: Progress Ind i = 0x8583 - Origination address is non-ISDN
00:11:54: Calling Party Number i = 0x01, 0x83, '15', Plan:ISDN, Type:Unknown
00:11:54: Called Party Number i = 0x81, '51', Plan:ISDN, Type:Unknown
00:11:54: CCBRI_Go Fr L3 pkt (Len=27) :
00:11:54: 5 1 81 90 4 3 90 90 A3 18 1 8A 1E 2 85 83 6C 4 1 83 31 35 70 3 81 35 31
00:11:54:
00:11:54: ISDN BR0: Incoming call id = 0x0008, dsl 0
00:11:54: ISDN BR0: LIF_EVENT: ces/callid 1/0x8 HOST_INCOMING_CALL
00:11:54: ISDN BR0: HOST_INCOMING_CALL: (non-POTS) VOICE
00:11:55: ISDN BR0: HOST_INCOMING_CALL: (1) call_type = VOICE
00:11:55: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = TRUE call type is VOICE ALAW
00:11:55: ISDN BR0: call id 0x8 call treated as DOV
00:11:55: ISDN BR0: Event: Received a DATA call from 15 on B2 at 64 Kb/s
00:11:55: ISDN BR0: Event: Accepting the call id 0x8
00:11:55: ISDN BR0:2: Incoming call rejected, unbindable
00:11:55: ISDN BR0: process_disconnect(): call id 0x8, call type is DATA, b_idb 0x24F470, ces 1, cause Call rejected(0x15)
00:11:55: ISDN: get_isdn_service_state(): idb 0x24F470 bchan 3 is_isdn 1 Not a Pri
router-2503-II#
00:11:55: ISDN BR0: HOST_INCOMING_CALL: DIALER ERROR 1: bchan 1, call id 8
00:11:55: CCBRI_Go Fr Host InPkgInfo (Len=13) :
00:11:55: 5 0 1 0 8 3 8 1 95 8 2 80 95
00:11:55:
00:11:55: ISDN BR0: LIF_EVENT: ces/callid 1/0x8 HOST_DISCONNECT_ACK
00:11:55: ISDN: get_isdn_service_state(): idb 0x24F470 bchan 3 is_isdn 1 Not a Pri
00:11:55: ISDN BR0: HOST_DISCONNECT_ACK: call type is VOICE
00:11:55: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x81
00:11:55: Cause i = 0x8095 - Call rejected
router-2503-II#
Have you any ideas where to look from here?
Regards
Marcos -
Why does my iPhone add a 1 like it's long distance when all my numbers are local? Anyway to disable this?
Just so. In addition, there is no such thing as a local call from a mobile phone because the mobile networks are separate from the public switched telephone network (PSTN).
HOWEVER, the 1 is unnecessary if you are in the North American Numbering Plan. Go into Settings/Phone and see if International Assist is on. If it is turn it off.
Message was edited by: Lawrence Finch -
Hi,
I'm trying to configure my router C1841 to allow the callback to isdn remote user.
The callback perfectly work with my analog remote users.
The router did not initiate callback to the remote isdn caller.Here is the configuration of my ISDN dialer interface :
interface Dialer10
ip unnumbered FastEthernet0/0
ip access-group sdm_dialer10_in in
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer remote-name xxxxxx
dialer idle-timeout 600
dialer enable-timeout 2
dialer string 027429815
dialer caller 027429815 callback
dialer-group 10
peer default ip address dhcp-pool xxx-Users
compress stac software
no cdp enable
ppp callback accept
ppp authentication ms-chap ms-chap-v2 callin
end
Could you please let me know what I'm missing ?
The debug show the following :
Dec 11 09:26:16.610: ISDN BR0/0/0 Q921: User RX <- UI sapi=0 tei=127
Dec 11 09:26:16.610: ISDN BR0/0/0 Q931: SETUP pd = 8 callref = 0x11
Sending Complete
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Calling Party Number i = 0x2183, '27429815'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '27338878'
Plan:ISDN, Type:National
Dec 11 09:26:16.614: ISDN BR0/0/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1: b channel 0, call id 0x48
Dec 11 09:26:16.618: ISDN BR0/0/0 Q921: L2_EstablishDataLink: sending SABME
Dec 11 09:26:16.618: ISDN BR0/0/0 Q921: User TX -> SABMEp sapi=0 tei=125
Dec 11 09:26:16.634: ISDN BR0/0/0 Q921: User RX <- UAf sapi=0 tei=125
Dec 11 09:26:16.634: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/0, TEI 125 changed to up
Dec 11 09:26:16.634: ISDN BR0/0/0 Q921: User TX -> INFO sapi=0 tei=125, ns=0 nr=0
Dec 11 09:26:16.634: ISDN BR0/0/0 Q931: RELEASE_COMP pd = 8 callref = 0x91
Cause i = 0x8095 - Call rejected
Dec 11 09:26:16.654: ISDN BR0/0/0 Q921: User RX <- RR sapi=0 tei=125 nr=1
Dec 11 09:26:26.653: ISDN BR0/0/0 Q921: User TX -> RRp sapi=0 tei=125 nr=0
Dec 11 09:26:26.665: ISDN BR0/0/0 Q921: User RX <- RRf sapi=0 tei=125 nr=1
Dec 11 09:26:31.769: ISDN BR0/0/0 Q921: User RX <- DISCp sapi=0 tei=125
Dec 11 09:26:31.769: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 125 changed to down
Thanks a lot for help -
TCS Recording playback on EP e.164 numbering
Hi Experts
Our setup is Cisco TCS,VCSc,VCSe,TMS,32Nos of 5320s MCU's and 310Nos of SX20 EP. Our numbring plan is 5digit numbering Plan.
EP Numbeing-------- 71XXX to 73XXX
Meeting ID's ---------801XX to 832XX
Recording Aliases--74101 to 74108
TCS Playback E.164------75XXX
We are configured the TCS server on above numbering plan.Whenever we enable play recording on EndPoint feature in TCS the TCS will generate the playback E.164 number automatically. The number is generated by TCS is 6digit number (Ex..75XXXX).
Is there any way to modify / Reduce the TCS playback E.164 number in TCS..Herewith attached the Screenshot of TCS for your referanceThere is no way to edit the playback alias, other than the prefix that you specify. The TCS will auto generate the suffix portion of the alias, and there is no user configuration of how it does this.
-
VoIP--ISDN--VoIP between 2 Cisco VG doesn't work...
Dear All,
Two Cisco routers are connected as follows:
VoIP--> R1 -->ISDN--> R2 -->VoIP
Appreciate any ideas or recommendations to get successful calls from R1 to R2?
The Problem: When the call leaves R1 to R2 over the ISDN link in between i see the call coming on R2 and then disconnected with the following disconnect reason:
Cause i = 0x82E6 - Recovery on timer expiry
R1 config:
interface Serial4/0:15
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-net5
isdn overlap-receiving T302 5000
isdn protocol-emulate network
isdn incoming-voice voice
no cdp enable
dial-peer voice 10 pots
preference 1
destination-pattern 000T
progress_ind alert enable 8
direct-inward-dial
port 4/0:15
dial-peer voice 11 pots
preference 3
destination-pattern .T
progress_ind alert enable 8
direct-inward-dial
port 4/0:15
forward-digits 5
R2 config:
interface Serial2/0:15
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-net5
isdn overlap-receiving T302 4000
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
no cdp enable
dial-peer voice 99 pots
tone ringback alert-no-PI
preference 2
destination-pattern .T
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 1
progress_ind connect enable 1
incoming called-number .T
no digit-strip
direct-inward-dial
port 2/0:15
dial-peer voice 100 voip
destination-pattern 89...
progress_ind setup enable 3
progress_ind progress enable 1
progress_ind connect enable 1
voice-class codec 1
session target ipv4:10.1.1.2
incoming called-number .T
no vad
Debug isdn q931 from R2
*May 7 13:39:25.129: ISDN Se2/0:15 Q931: RX <- SETUP pd = 8 callref = 0x014D
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Net Specific Fac i = 0x00E2
Calling Party Number i = 0x2181, '4364574474'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '89222'
Plan:ISDN, Type:National
*May 7 13:39:25.133: ISDN Se2/0:15 Q931: TX -> SETUP_ACK pd = 8 callref = 0x814D
Channel ID i = 0xA98381
Exclusive, Channel 1
*May 7 13:39:34.841: ISDN Se2/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x014D
Cause i = 0x82E6 - Recovery on timer expiry
*May 7 13:39:34.845: ISDN Se2/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x814D
*May 7 13:39:34.853: ISDN Se2/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x014D
Any ideas or recommendations to get successful calls from R1 to R2?
Thanks in advance.Also, i do not know why:
Calling Party Number i = 0x2181, '4364574474'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '89222'
Plan:ISDN, Type:National
and the 2 interface on R1 and R2 are using isdn switch type primary-net5!
could this be the problem? -
I've got an H.323 GW off the CallManager. The H.323 GW configuration in the CallManager has the "Display IE Delivery" checked, and I can see the Display information in the H.225 message to the GW:
Display: Length Of IE=12
Data 4161726F6E204468696D616E
HOWEVER, I don't see the PRI sending out the Display IE:
Dec 21 16:59:20: ISDN Se3/0:23 Q931: TX -> SETUP pd = 8 callref = 0x00FF
Bearer Capability i = 0x8090A2
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Calling Party Number i = 0x2181, '65013'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '25556'
Plan:ISDN, Type:National
Dec 21 16:59:20: ISDN Se3/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x80FF
Channel ID i = 0xA98397
Exclusive, Channel 23
The applicable Dial-Peers are:
dial-peer voice 12 pots
description RRB Extentions
translation-profile incoming RRB-onnet-digitstrip
preference 1
destination-pattern [2-9]
direct-inward-dial
port 3/0:23
forward-digits all
dial-peer voice 1000 voip
incoming called-number T
dtmf-relay h245-alphanumeric
no vad
Any Ideas?In the Callmanager Gateway configuration Page,
1) Verify that the "Presentation Bit" is set to "Allowed".
2) Verify under Service Parameters that the "ToSendH225UserInfoMessage" is set to "True".
Maybe you are looking for
-
Run Report with Pass Number and Varchar Lexical Parameter values
Dear Sir/Madam Due to an urgent change required to a report I would most appreciate it if you can please advise me if it is possible to get this report working by either passing in multiple lexical parameters or one signle lexical parameter when call
-
Hello all, I am new into SAP Retail and would like to know the advantages of using material type MODE instead of HAWA? Thank you all in advance.
-
Why can't I add artwork for wav files
I have a few music in my iTunes that are in WAV audio format, in the get info I am not able to add missing artwork like I can do all the others audio format and yes I have tried the get album artwork from iTunes but it says could not be found. What
-
Is it possible to start JSON Service specific to the user session?
Is it possible to make JSON service to start different sessions of BusinessLogic Code in short - Is it possible to start JSON Service specific to the user session? Here is what I'm trying to do. I have a created a Configuration Model which contains t
-
Hi Everyone! Is there possiblity to link galery album from Picassa to Siena Project? I'm making app with many photos, and I would like to link Picassa album to my app, but I don't know how. I'm using Excel sheet with data.