Numbers '08 Using formuals to get percentage
I'm sure this is relatively easy but I'm new to spreadsheets so bear with me.
I have a column of numbers. I am able to get the sum of the column. To the right of this column of numbers, I want to calculate the percentage of each row in relation to the overall sum. Is there an easy way to do this besides entering a unique formula in each row.
RIght now I have about 100 rows and I'd prefer not to type the similar formula each time. This is the formula I'm using right now:
=D2/SUM(D1:D282)*100
The next row would have D3/SUM(D1:D282)*100, then D4, D5, etc....
Hi jbresner,
Yes, put the formula in the top cell of the column then press Return, now click to highlight that cell. In that cell you'll now see a little round thingy in the lower right corner. Drag that circle down all the rows you need to fill. The formula will be copied to each cell as you drag.
Hope this helps you.
Sincerely,
RicD
Similar Messages
-
The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!
You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend! -
I downloaded the ios6 update for the iphone to my phone and my moms"s phone. Now they are syncronized and I lost my contact telephone numbers. Now when I get a text or send text it shows up on my mom's phone. I asked for help from the people at the ATT store and had no idea how to help me. That is crazy that they don't even know anything about their own products! This is EXTREMELY frustrating. Did you create a software that cannot be reversed or corrected? How to I restore my phone to the way it was? I am being told it can't be done. I have been an ATT customer for 8 years but I would love to go to Verizon right now. Pleae let me know how to reverse this and get the phones unsynced.
If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support -
When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.
Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files. -
i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?
I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.
-
When I try to use safari I get a message that states can not find server Xn--%20%20-1ia0eb092a
It sounds like you've got a messed-up homepage. Click the Safari menu, click Preferences, and under "Home page", re-type the page you'd prefer to load when Safari starts (eg "nytimes.com" or whatever). Close preferences and try again.
Matt -
Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "";
Also I have used,
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof {
public static void main (String[] args) {
Hashtable env = new Hashtable();
String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
String adminPassword = "XXXXXXX";
String ldapURL = "ldap://mydc.antipodes.com:389";
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
//set security credentials, note using simple cleartext authentication
env.put(Context.SECURITY_AUTHENTICATION,"simple");
env.put(Context.SECURITY_PRINCIPAL,adminName);
env.put(Context.SECURITY_CREDENTIALS,adminPassword);
//connect to my domain controller
env.put(Context.PROVIDER_URL,ldapURL);
try {
//Create the initial directory context
LdapContext ctx = new InitialLdapContext(env,null);
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
//Specify the Base for the search
String searchBase = "DC=antipodes,DC=com";
//initialize counter to total the group members
int totalResults = 0;
//Specify the attributes to return
String returnedAtts[]={"memberOf"};
searchCtls.setReturningAttributes(returnedAtts);
//Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
System.out.println(">>>" + sr.getName());
//Print out the groups
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
Attribute attr = (Attribute)ae.next();
System.out.println("Attribute: " + attr.getID());
for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
System.out.println(" " + totalResults + ". " + e.next());
catch (NamingException e) {
System.err.println("Problem listing membership: " + e);
System.out.println("Total groups: " + totalResults);
ctx.close();
catch (NamingException e) {
System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated.Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "";
Also I have used,
String searchFilter = "(&(objectClass=user)(CN=Username))";
//Specify the Base for the search
String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof {
public static void main (String[] args) {
Hashtable env = new Hashtable();
String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
String adminPassword = "XXXXXXX";
String ldapURL = "ldap://mydc.antipodes.com:389";
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
//set security credentials, note using simple cleartext authentication
env.put(Context.SECURITY_AUTHENTICATION,"simple");
env.put(Context.SECURITY_PRINCIPAL,adminName);
env.put(Context.SECURITY_CREDENTIALS,adminPassword);
//connect to my domain controller
env.put(Context.PROVIDER_URL,ldapURL);
try {
//Create the initial directory context
LdapContext ctx = new InitialLdapContext(env,null);
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
//Specify the Base for the search
String searchBase = "DC=antipodes,DC=com";
//initialize counter to total the group members
int totalResults = 0;
//Specify the attributes to return
String returnedAtts[]={"memberOf"};
searchCtls.setReturningAttributes(returnedAtts);
//Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
System.out.println(">>>" + sr.getName());
//Print out the groups
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
Attribute attr = (Attribute)ae.next();
System.out.println("Attribute: " + attr.getID());
for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
System.out.println(" " + totalResults + ". " + e.next());
catch (NamingException e) {
System.err.println("Problem listing membership: " + e);
System.out.println("Total groups: " + totalResults);
ctx.close();
catch (NamingException e) {
System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated. -
Default sales org on selection screen using set and get parameter!!
Hi,
I need to default value on selection screen using SET n GET parameter...logic to be used should be:
Sales Organisation:
This field should be filled by default using the user parameter id VKO. (using sentence GET PARAMETER and SET PARAMETER)...
Hope i need to write the code in initialisation and what shud b the content?
Regards
Gunjanhi,
TABLES <table name>.
SET PARAMETER ID VKO FIELD <tablename-fieldname>.
call transaction 'zxx'.
try this sample program,
REPORT BOOKINGS NO STANDARD PAGE HEADING.
TABLES SBOOK.
START-OF-SELECTION.
WRITE: 'Select a booking',
SKIP.
GET SBOOK.
WRITE: SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
HIDE: SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
AT LINE-SELECTION.
SET PARAMETER ID: 'CAR' FIELD SBOOK-CARRID,
'CON' FIELD SBOOK-CONNID,
'DAY' FIELD SBOOK-FLDATE,
'BOK' FIELD SBOOK-BOOKID.
CALL TRANSACTION 'BOOK'.
regards,
siva
Message was edited by:
Shan -
How can I use applet to get the desktop image of client
hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.
-
How do I use daqmx to get encoder direction/count on E-series board?
Hardware:
PCI-6014
Labview 7.1
I have a linear actuator and wish to get distance/direction. The
motor has a quad encoder with phase A and B only. I connected the
lines according the the E-series, PFI-8 and PFI-6, and ground to
digital ground. I then attempted to design a control with daqmx but
failed. I have tried the daqmx examples but none were attempting
a reverse in direction. Most examples given for direction change
are for traditional daq control; i cant make a correlation on what to
use to substite traditional daq with daqmx vi's.
2 questions:
How do I use daqmx to get encoder direction/count on E-series board?
Are there low pass filter vi's recommended for each phase connection to stabilize data?
Thanks,
Wayne HilburnHello Wayne,
Take a look at the Count Digital Events.vi shipping example. You can find this in LabVIEW by selecting Help >> Find Examples... then browsing to Hardware Input and Output >> DAQmx >> Counter Measurements >> Count Digital Events.
If you set the "Count Direction" control to "Externally Controlled", you will be able to count up and down depending on which direction you rotate your encoder. Make sure you wire Phase A to Ctr0 Source and Phase B to P0.6. P0.6 is the up/down line for counter 0.
I hope this helps. Please let me know if you have any further questions.
Regards,
Sean C. -
does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?
Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content. -
Using JMX to get status information about NetWeaver cluster
Hi everybody,
We are trying to use JMX to get some status information about NetWeaver cluster.
For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
What are the first two node Ids from the list?
How can the last two node Ids be identified as java processes?
How can we obtain status information about each java process (node id) ?
Thanks for all ideas,
RaduAs there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
Machtelt. -
Trying to use FTP to get data from a different server
Hi Friends,
I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = V_PASSWORD
SOURCELEN = V_PWD_LEN
KEY = CS_KEY_500098
IMPORTING
DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'test'
PASSWORD = V_PASSWORD
HOST = '176.0.1.6'
RFC_DESTINATION = 'SAPFTPA'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = CMD
TABLES
DATA = MTAB_DATA1
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA1.
WRITE: / MTAB_DATA1.
ENDLOOP.
ELSE.
CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
WRITE: / ERROR.
ENDIF.Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ). -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = S_PWD
SOURCELEN = DSTLEN
KEY = KEY
IMPORTING
DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = P_USER -
> Username
PASSWORD = S_PWD -
> password
HOST = P_HOST -
> Host
RFC_DESTINATION = P_DEST -
> Destination
IMPORTING
HANDLE = HDL
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = HDL
COMMAND = 'set passive on'
TABLES
DATA = RESULT
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = G_FCNAME
CHARACTER_MODE = 'X'
TABLES
TEXT = T_FILE1
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = G_FCNAME1
CHARACTER_MODE = 'X'
TABLES
TEXT = T_FILE2
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
DESTINATION = P_DEST
EXCEPTIONS
DESTINATION_NOT_OPEN = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FTPCON
Hope it helps..... -
When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?
See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.
I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.
Maybe you are looking for
-
Creating search help for a field in AdHoc Query
Hi We have created an infoset based on LDB PCH. (The infoset contains object type O only). For the object-id field the users want search help when choosing this field for selection. Using "start via selection screen" does not give a good solution. Ca
-
Return current period based off of current fiscal year and date
Good Afternoon, Is there a way in the webi that I can create a dimension that always reflects the current Fiscal Month based of Fiscal year and date? I have a report that I am trying to show sales for a customer based off the current fiscal month. I
-
Different chart for each level hierarchy in report designer
Is there a way to display a different chart for each level of the hierarchy in a report designer? I want a different chart for each level. That is, if there are 5 nodes in level 4, I want 5 different nodes. Is there a way to do this? I tried to inser
-
Why is my iphone sending blank texts on its own?
I keep getting texts back from friends saying that I have sent them blank text messages, and some of them recieved multiple blank texts. Why is my phone doing this on its own?
-
Performance of cumulative total and caching
Hi all I'm having some trouble with performance when using the cumulative total function from AWM in derived measures. For some of our measures we store a delta, i.e. the change from the previous actual and an initial state as the first delta. From t